Temperature-responsive polymers for cell culture and tissue engineering applications

Switchable and Responsive Surfaces and Materials for Biomedical Applications

Volumn , Issue , 2015, Pages 203-233

  Akiyama, Y ^a   Okano, T ^a  

^a TOKYO WOMEN'S MEDICAL UNIVERSITY   (Japan)

Author keywords

Cell sheet engineering; PIPAAm; Temperature responsive cell culture surface

Indexed keywords

CELL CULTURE; CELLS; CYTOLOGY; TISSUE ENGINEERING;

CELL SHEET ENGINEERING; CLINICAL APPLICATION; PIPAAM; REGENERATIVE MEDICINE; TEMPERATURE CHANGES; TEMPERATURE RESPONSIVE POLYMERS; TEMPERATURE-RESPONSIVE CELL CULTURE SURFACES; TISSUE ENGINEERING APPLICATIONS;

CELL ENGINEERING;

EID: 84942868668     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-85709-713-2.00009-2     Document Type: Chapter

References (138)

1. Akiyama Y., Kikuchi A., Yamato M., Okano T. Ultrathin poly(N-isopropylacrylamide) grafted layer on polystyrene surfaces for cell adhesion/detachment control. Langmuir 2004, 20:5506-5511.
2. Akizuki T., Oda S., Komaki M., Tsuchioka H., Kawakatsu N., Kikuchi A., et al. Application of periodontal ligament cell sheet for periodontal regeneration: a pilot study in beagle dogs. Journal of Periodontal Research 2005, 40:245-251.
3. Barbey R., Lavanant L., Paripovic D., Schuwer N., Sugnaux C., Tugulu S., et al. Polymer brushes via surface-initiated controlled radical polymerization: synthesis, characterization, properties, and applications. Chemical Reviews 2009, 109:5437-5527.
4. Biazar E., Khorasani M., Daliri M. Cell sheet engineering: solvent effect on nanometric grafting of poly-N-isopropylacrylamide onto polystyrene substrate under ultraviolet radiation. International Journal of Nanomedicine 2011, 6:295-302.
5. Biazar E., Zeinali R., Montazeri N., Pourshamsian K., Behrouz M.J., Asefnejad A., et al. Cell engineering: nanometric grafting of poly-N-isopropylacrylamide onto polystyrene film by different doses of gamma radiation. International Journal of Nanomedicine 2010, 5:549-556.
6. Burillon C., Huot L., Justin V., Nataf S., Chapuis F., Decullier E., et al. Cultured autologous oral mucosal epithelial cell sheet (CAOMECS) transplantation for the treatment of corneal limbal epithelial stem cell deficiency. Investigative Ophthalmology and Visual Science 2012, 53:1325-1331.
7. Canavan H.E., Cheng X., Graham D.J., Ratner B.D., Castner D.G. Cell sheet detachment affects the extracellular matrix: a surface science study comparing thermal liftoff, enzymatic, and mechanical methods. Journal of Biomedical Materials Research Part A 2005, 75:1-13.
8. Canavan H.E., Cheng X., Graham D.J., Ratner B.D., Castner D.G. Surface characterization of the extracellular matrix remaining after cell detachment from a thermoresponsive polymer. Langmuir 2005, 21:1949-1955.
9. Canavan H.E., Graham D.J., Cheng X., Ratner B.D., Castner D.G. Comparison of native extracellular matrix with adsorbed protein films using secondary ion mass spectrometry. Langmuir 2007, 23:50-56.
10. Cheng X., Canavan H.E., Stein M.J., Hull J.R., Kweskin S.J., Wagner M.S., et al. Surface chemical and mechanical properties of plasma-polymerized N-isopropylacrylamide. Langmuir 2005, 21:7833-7841.
11. Cheng X., Wang Y., Hanein Y., Bohringer K.F., Ratner B.D. Novel cell patterning using microheater-controlled thermoresponsive plasma films. Journal of Biomedical Materials Research Part A 2004, 70:159-168.
12. Chen G., Imanishi Y., Ito Y. Effect of protein and cell behavior on pattern-grafted thermoresponsive polymer. Journal of Biomedical Materials Research 1998, 42:38-44.
13. Chen G., Ito Y., Imanishi Y. Regulation of growth and adhesion of cultured cells by insulin conjugated with thermoresponsive polymers. Biotechnology and Bioengineering 1997, 53:339-344.
14. Choi S., Choi B.C., Xue C., Leckband D.E. Protein adsorption mechanisms determine the efficiency of thermally controlled cell adhesion on poly (N-isopropylacrylamide) brushes. Biomacromolecules 2013, 14:92-100.
15. Della Volpe C., Cassinelli C., Morra M. Wilhelmy plate measurements on poly(N-isopropylacrylamide)-grafted surfaces. Langmuir 1998, 14:4650-4656.
16. Ebara M., Yamato M., Aoyagi T., Kikuchi A., Sakai K., Okano T. Immobilization of cell-adhesive peptides to temperature-responsive surfaces facilitates both serum-free cell adhesion and noninvasive cell harvest. Tissue Engineering 2004, 10:1125-1135.
17. Ebara M., Yamato M., Aoyagi T., Kikuchi A., Sakai K., Okano T. Temperature-responsive cell culture surfaces enable "on-off" affinity control between cell integrins and RGDS ligands. Biomacromolecules 2004, 5:505-510.
18. Edmondson S., Osborne V.L., Huck W.T. Polymer brushes via surface-initiated polymerizations. Chemical Society Reviews 2004, 33:14-22.
19. Fukumori K., Akiyama Y., Kumashiro Y., Kobayashi J., Yamato M., Sakai K., et al. Characterization of ultra-thin temperature-responsive polymer layer and its polymer thickness dependency on cell attachment/detachment properties. Macromolecular Bioscience 2010, 10:1117-1129.
20. Fukumori K., Akiyama Y., Yamato M., Kobayashi J., Sakai K., Okano T. Temperature-responsive glass coverslips with an ultrathin poly(N-isopropylacrylamide) layer. Acta Biomaterialia 2009, 5:470-476.
21. Galperin A., Long T.J., Ratner B.D. Degradable, thermo-sensitive poly(N-isopropyl acrylamide)-based scaffolds with controlled porosity for tissue engineering applications. Biomacromolecules 2010, 11:2583-2592.
22. Genzer J., Bhat R.R. Surface-bound soft matter gradients. Langmuir 2008, 24:2294-2317.
23. Glacken M.W., Fleischaker R.J., Sinskey A.J. Large-scale production of mammalian cells and their products: engineering principles and barriers to scale-up. Annuals of the New York Academy of Sciences 1983, 413:355-372.
24. Gramm S., Teichman J., Nitschlke M., Goh U., Eichhorn K.J., Werner C. Electron beam immobilization of functionalized poly(vinyl methyl ether) thin films on polymer surfaces. Towards stimuli responsive coatings for biomedical purposes. Express Polymer Letters 2011, 5:970.
25. Haraguchi Y., Shimizu T., Yamato M., Kikuchi A., Okano T. Electrical coupling of cardiomyocyte sheets occurs rapidly via functional gap junction formation. Biomaterials 2006, 27:4765-4774.
26. Harimoto M., Yamato M., Hirose M., Takahashi C., Isoi Y., Kikuchi A., et al. Novel approach for achieving double-layered cell sheets co-culture: overlaying endothelial cell sheets onto monolayer hepatocytes utilizing temperature-responsive culture dishes. Journal of Biomedical Materials Research 2002, 62:464-470.
27. Hasegawa M., Yamato M., Kikuchi A., Okano T., Ishikawa I. Human periodontal ligament cell sheets can regenerate periodontal ligament tissue in an athymic rat model. Tissue Engineering 2005, 11:469-478.
28. Heskins M., Guillet J.E. Solution properties of poly(N-isopropylacrylamide). Journal of Macromolecular Science Part A - Chemistry 1968, 2:1441-1455.
29. Higuchi A., Aoki N., Yamamoto T., Miyazaki T., Fukushima H., Tak T.M., et al. Temperature-induced cell detachment on immobilized pluronic surface. Journal of Biomedical Materials Research Part A 2006, 79:380-392.
30. Hirose M., Yamato M., Kwon O.H., Harimoto M., Kushida A., Shimizu T., et al. Temperature-Responsive surface for novel co-culture systems of hepatocytes with endothelial cells: 2-D patterned and double layered co-cultures. Yonsei Medical Journal 2000, 41:803-813.
31. Hu S., Ren X., Bachman M., Sims C.E., Li G.P., Allbritton N.L. Surface-directed, graft polymerization within microfluidic channels. Analytical Chemistry 2004, 76:1865-1870.
32. Hyeong Kwon O., Kikuchi A., Yamato M., Okano T. Accelerated cell sheet recovery by co-grafting of PEG with PIPAAm onto porous cell culture membranes. Biomaterials 2003, 24:1223-1232.
33. Ikada Y. Surface modification of polymers for medical applications. Biomaterials 1994, 15:725-736.
34. Ito Y., Chen G., Guan Y., Imanishi Y. Patterned immobilization of thermoresponsive polymer. Langmuir 1997, 13:2756-2759.
35. Iwata T., Yamato M., Tsuchioka H., Takagi R., Mukobata S., Washio K., et al. Periodontal regeneration with multi-layered periodontal ligament-derived cell sheets in a canine model. Biomaterials 2009, 30:2716-2723.
36. Iwata T., Yamato M., Zhang Z., Mukobata S., Washio K., Ando T., et al. Validation of human periodontal ligament-derived cells as a reliable source for cytotherapeutic use. Journal of Clinical Periodontology 2010, 37:1088-1099.
37. Kanai N., Yamato M., Ohki T., Yamamoto M., Okano T. Fabricated autologous epidermal cell sheets for the prevention of esophageal stricture after circumferential ESD in a porcine model. Gastrointestinal Endoscopy 2012, 76:873-881.
38. Kanzaki M., Yamato M., Takagi R., Kikkawa T., Isaka T., Okano T., et al. Controlled collagen crosslinking process in tissue-engineered fibroblast sheets for preventing scar contracture on the surface of lungs. Journal of Tissue Engineering and Regenerative Medicine 2012, 5:383-391.
39. Kanzaki M., Yamato M., Yang J., Sekine H., Kohno C., Takagi R., et al. Dynamic sealing of lung air leaks by the transplantation of tissue engineered cell sheets. Biomaterials 2007, 28:4294-4302.
40. Kanzaki M., Yamato M., Yang J., Sekine H., Takagi R., Isaka T., et al. Functional closure of visceral pleural defects by autologous tissue engineered cell sheets. European Journal of Cardiothoracic Surgery 2008, 34:864-869.
41. Kenda-Ropson N., Lenglois S., Miller A.O. Microsupport with two-dimensional geometry (2D-MS) 4. Temperature-induced detachment of anchorage-dependent CHO-K1 cells from cryoresponsive MicroHex((R)) (CryoHex). Cytotechnology 2002, 39:163-170.
42. Kessel S., Schmidt S., Muller R., Wischerhoff E., Laschewsky A., Lutz J.F., et al. Thermoresponsive PEG-based polymer layers: surface characterization with AFM force measurements. Langmuir 2010, 26:3462-3467.
43. Kikuchi A., Okano T. Nanostructured designs of biomedical materials: applications of cell sheet engineering to functional regenerative tissues and organs. The Journal of Controlled Release 2005, 101:69-84.
44. Kikuchi A., Okuhara M., Karikusa F., Sakurai Y., Okano T. Two-dimensional manipulation of confluently cultured vascular endothelial cells using temperature-responsive poly(N-isopropylacrylamide)-grafted surfaces. Journal of Biomaterials Science Polymer Edition 1998, 9:1331-1348.
45. Kim K., Ohashi K., Utoh R., Kano K., Okano T. Preserved liver-specific functions of hepatocytes in 3D co-culture with endothelial cell sheets. Biomaterials 2012, 33:1406-1413.
46. Kushida A., Yamato M., Kikuchi A., Okano T. Two-dimensional manipulation of differentiated Madin-Darby canine kidney (MDCK) cell sheets: the noninvasive harvest from temperature-responsive culture dishes and transfer to other surfaces. Journal of Biomedical Materials Research 2001, 54:37-46.
47. Kushida A., Yamato M., Konno C., Kikuchi A., Sakurai Y., Okano T. Decrease in culture temperature releases monolayer endothelial cell sheets together with deposited fibronectin matrix from temperature-responsive culture surfaces. Journal of Biomedical Materials Research 1999, 45:355-362.
48. Kushida A., Yamato M., Konno C., Kikuchi A., Sakurai Y., Okano T. Temperature-responsive culture dishes allow nonenzymatic harvest of differentiated Madin-Darby canine kidney (MDCK) cell sheets. Journal of Biomedical Materials Research 2000, 51:216-223.
49. Kwon O.H., Kikuchi A., Yamato M., Sakurai Y., Okano T. Rapid cell sheet detachment from poly(N-isopropylacrylamide)-grafted porous cell culture membranes. Journal of Biomedical Materials Research 2000, 50:82-89.
50. Lee E.L., Von Recum H.A. Cell culture platform with mechanical conditioning and nondamaging cellular detachment. Journal of Biomedical Materials Research Part A 2010, 93:411-418.
51. Liao T., Moussallem M.D., Kim J., Schlenoff J.B., Ma T. N-isopropylacrylamide-based thermoresponsive polyelectrolyte multilayer films for human mesenchymal stem cell expansion. Biotechnology Progress 2010, 26:1705-1713.
52. Lin J.B., Isenberg B.C., Shen Y., Schorsch K., Sazonova O.V., Wong J.Y. Thermo-responsive poly(N-isopropylacrylamide) grafted onto microtextured poly(dimethylsiloxane) for aligned cell sheet engineering. Colloids and Surfaces B: Biointerfaces 2012, 99:108-115.
53. Li L., Zhu Y., Li B., Gao C. Fabrication of thermoresponsive polymer gradients for study of cell adhesion and detachment. Langmuir 2008, 24:13632-13639.
54. Loh X.J., Cheong W.C.D., Li J., Ito Y. Novel poly(N-isopropylacrylamide)-poly[(R)-3-hydroxybutyrate]-poly(N-isopropylacrylamide) triblock copolymer surface as a culture substrate for human mesenchymal stem cells. Soft Matter 2009, 5:2937-2946.
55. Loh X.J., Gong J., Sakuragi M., Kitajima T., Liu M., Li J., et al. Surface coating with a thermoresponsive copolymer for the culture and non-enzymatic recovery of mouse embryonic stem cells. Macromolecular Bioscience 2009, 9:1069-1079.
56. Ma D., Chen H., Shi D., Li Z., Wang J. Preparation and characterization of thermo-responsive PDMS surfaces grafted with poly(N-isopropylacrylamide) by benzophenone-initiated photopolymerization. Journal of Colloid and Interface Science 2009, 332:85-90.
57. Martin Y., Eldardiri M., Lawrence-Watt D.J., Sharpe J.R. Microcarriers and their potential in tissue regeneration. Tissue Engineering Part B Reviews 2011, 17:71-80.
58. Matsuda T., Saito Y., Shoda K. Cell sorting technique based on thermoresponsive differential cell adhesiveness. Biomacromolecules 2007, 8:2345-2349.
59. Memon I.A., Sawa Y., Fukushima N., Matsumiya G., Miyagawa S., Taketani S., et al. Repair of impaired myocardium by means of implantation of engineered autologous myoblast sheets. The Journal of Thoracic and Cardiovascular Surgery 2005, 130:1333-1341.
60. Mizutani A., Kikuchi A., Yamato M., Kanazawa H., Okano T. Preparation of thermoresponsive polymer brush surfaces and their interaction with cells. Biomaterials 2008, 29:2073-2081.
61. Moran M.T., Carroll W.M., Gorelov A., Rochev Y. Intact endothelial cell sheet harvesting from thermoresponsive surfaces coated with cell adhesion promoters. Journal of the Royal Society Interface 2007, 4:1151-1157.
62. Moran M.T., Carroll W.M., Selezneva I., Gorelov A., Rochev Y. Cell growth and detachment from protein-coated PNIPAAm-based copolymers. Journal of Biomedical Materials Research Part A 2007, 81:870-876.
63. Morikawa N., Matsuda T. Thermoresponsive artificial extracellular matrix: N-isopropylacrylamide-graft-copolymerized gelatin. Journal of Biomaterial Science Polymer Edition 2002, 13:167-183.
64. Morra M., Cassinelli C. Thermal modification of cell cultured on poly(N-isopropylacrylamide) surface grafated polystyrene dished 1997, Springer, New York.
65. Mukundan L.M., Nirmal R., Thomas L.V., Sajeev U.S., Nair P.D. Retrieval of rat aortic smooth muscle cells as intact cell sheet for regenerative medicine: a cost effective approach using photo polymerization. Biotechnology Letters 2011, 33:2083-2089.
66. Murakami D., Yamato M., Nishida K., Ohki T., Takagi R., Yang J., et al. The effect of micropores in the surface of temperature-responsive culture inserts on the fabrication of transplantable canine oral mucosal epithelial cell sheets. Biomaterials 2006, 27:5518-5523.
67. Murakami D., Yamato M., Nishida K., Ohki T., Takagi R., Yang J., et al. Fabrication of transplantable human oral mucosal epithelial cell sheets using temperature-responsive culture inserts without feeder layer cells. Journal of Artificial Organs 2006, 9:185-191.
68. Nagase K., Kobayashi J., Okano T. Temperature-responsive intelligent interfaces for biomolecular separation and cell sheet engineering. Journal of the Royal Society Interface 2009, 6(Suppl 3):S293-S309.
69. Nagase K., Watanabe M., Kikuchi A., Yamato M., Okano T. Thermo-responsive polymer brushes as intelligent biointerfaces: preparation via ATRP and characterization. Macromolecular Bioscience 2011, 11:400-409.
70. Nakayama M., Yamada N., Kumashiro Y., Kanazawa H., Yamato M., Okano T. Thermoresponsive poly(N-isopropylacrylamide)-based block copolymer coating for optimizing cell sheet fabrication. Macromolecular Bioscience 2012, 12:751-760.
71. Nash M.E., Carroll W.M., Foley P.J., Maguire G., Connell C.O., Gorelov A.V., et al. Ultra-thin spin coated crosslinkable hydrogels for use in cell sheet recovery-synthesis, characterisation to application. Soft Matter 2012, 8:3889-3899.
72. Nash M.E., Carroll W.M., Nikoloskya N., Yang R., O'connell C., Gorelov A.V., et al. Straightforward, one-step fabrication of ultrathin thermoresponsive films from commercially available pNIPAm for cell culture and recovery. ACS Applied Materials and Interfaces 2011, 3:1980-1990.
73. Nishida K., Yamato M., Hayashida Y., Watanabe K., Maeda N., Watanabe H., et al. Functional bioengineered corneal epithelial sheet grafts from corneal stem cells expanded ex vivo on a temperature-responsive cell culture surface. Transplantation 2004, 77:379-385.
74. Nishida K., Yamato M., Hayashida Y., Watanabe K., Yamamoto K., Adachi E., et al. Corneal reconstruction with tissue-engineered cell sheets composed of autologous oral mucosal epithelium. New England Journal of Medicine 2004, 351:1187-1196.
75. Ohashi K., Yokoyama T., Yamato M., Kuge H., Kanehiro H., Tsutsumi M., et al. Engineering functional two- and three-dimensional liver systems in vivo using hepatic tissue sheets. Nature Medicine 2007, 13:880-885.
76. Ohki T., Yamato M., Murakami D., Takagi R., Yang J., Namiki H., et al. Treatment of oesophageal ulcerations using endoscopic transplantation of tissue-engineered autologous oral mucosal epithelial cell sheets in a canine model. Gut 2006, 55:1704-1710.
77. Ohki T., Yamato M., Ota M., Takagi R., Murakami D., Kondo M., et al. Prevention of esophageal stricture after endoscopic submucosal dissection using tissue-engineered cell sheets. Gastroenterology 2012, 143:582-588. e1-2.
78. Okano T., Kataoka K., Yamada N., Sakurai Y., Amiya T., Mamada A. Bed material for cell culture. Japane Patent Application JP, TOKUGANHEI 1989, 1-31844.
79. Okano T., Yamada N., Okuhara M., Sakai H., Sakurai Y. Mechanism of cell detachment from temperature-modulated, hydrophilic-hydrophobic polymer surfaces. Biomaterials 1995, 16:297-303.
80. Okano T., Yamada N., Sakai H., Sakurai Y. A novel recovery system for cultured cells using plasma-treated polystyrene dishes grafted with poly(N-isopropylacrylamide). Journal of Biomedical Materials Research 1993, 27:1243-1251.
81. Pan Y.V., Wesley R.A., Luginbuhl R., Denton D.D., Ratner B.D. Plasma polymerized N-isopropylacrylamide: synthesis and characterization of a smart thermally responsive coating. Biomacromolecules 2001, 2:32-36.
82. Park S., Cho H.Y., Yoon J.A., Kwak Y., Srinivasan A., Hollinger J.O., et al. Photo-cross-linkable thermoresponsive star polymers designed for control of cell-surface interactions. Biomacromolecules 2010, 11:2647-2652.
83. Patel N.G., Cavicchia J.P., Zhang G., Zhang Newby B.M. Rapid cell sheet detachment using spin-coated pNIPAAm films retained on surfaces by an aminopropyltriethoxysilane network. Acta Biomaterials 2012, 8:2559-2567.
84. Ratner B.D. Surface modification of polymers: chemical, biological and surface analytical challenges. Biosensors and Bioelectronics 1995, 10:797-804.
85. Rayatpisheh S., Li P., Chan-Park M.B. Argon-plasma-induced ultrathin thermal grafting of thermoresponsive pNIPAm coating for contractile patterned human SMC sheet engineering. Macromolecular Bioscience 2012, 12:937-945.
86. Reddy T.T., Kano A., Maruyama A., Hadano M., Takahara A. Thermosensitive transparent semi-interpenetrating polymer networks for wound dressing and cell adhesion control. Biomacromolecules 2008, 9:1313-1321.
87. Reddy T.T., Kano A., Maruyama A., Hadano M., Takahara A. Synthesis and characterization of semi-interpenetrating polymer networks based on polyurethane and N-isopropylacrylamide for wound dressing. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2009, 88:32-40.
88. Reed J.A., Lucero A.E., Hu S., Ista L.K., Bore M.T., Lopez G.P., et al. A low-cost, rapid deposition method for "smart" films: applications in mammalian cell release. ACS Applied Materials & Interfaces 2010, 2:1048-1051.
89. Rollason G., Davies J.E., Sefton M.V. Preliminary report on cell culture on a thermally reversible copolymer. Biomaterials 1993, 14:153-155.
90. Saito T., Ohashi K., Utoh R., Shimizu H., Ise K., Suzuki H., et al. Reversal of diabetes by the creation of neo-islet tissues into a subcutaneous site using islet cell sheets. Transplantation 2011, 92:1231-1236.
91. Sakai H., Okano T., Yamada N., Sakurai Y. Thermoresponsive polymer surface for cell culture: analysis of the surface and control of the cell attachment/detachment. Advanced biomaterials in biomedical engineering and drug delivery systems 1996, Springer, Tokyo. N. Ogata, S. Kim, J. Feijen, T. Okano (Eds.).
92. Schmidt S., Zeiser M., Hellweg T., Duschl C., Fery A., Hwald M., et al. Adhesion and mechanical properties of PNIPAM microgel films and their potential use as switchable cell culture substrates. Advanced Functional Materials 2010, 20:3235-3243.
93. Sekine H., Shimizu T., Dobashi I., Matsuura K., Hagiwara N., Takahashi M., et al. Cardiac cell sheet transplantation improves damaged heart function via superior cell survival in comparison with dissociated cell injection. Tissue Engineering Part A 2011, 17:2973-2980.
94. Sekine H., Shimizu T., Hobo K., Sekiya S., Yang J., Yamato M., et al. Endothelial cell coculture within tissue-engineered cardiomyocyte sheets enhances neovascularization and improves cardiac function of ischemic hearts. Circulation 2008, 118:S145-S152.
95. Sekine H., Shimizu T., Sakaguchi K., Dobashi I., Wada M., Yamato M., et al. In vitro fabrication of functional three-dimensional tissues with perfusable blood vessels. Nature Communications 2013, 4:1399.
96. Shi D., Ma D., Dong F., Zong C., Liu L., Shen D., et al. Proliferation and multi-differentiation potentials of human mesenchymal stem cells on thermoresponsive PDMS surfaces grafted with PNIPAAm. Bioscience Reports 2010, 30:149-158.
97. Shimizu H., Ohashi K., Utoh R., Ise K., Gotoh M., Yamato M., et al. Bioengineering of a functional sheet of islet cells for the treatment of diabetes mellitus. Biomaterials 2009, 30:5943-5949.
98. Shimizu T., Sekine H., Isoi Y., Yamato M., Kikuchi A., Okano T. Long-term survival and growth of pulsatile myocardial tissue grafts engineered by the layering of cardiomyocyte sheets. Tissue Engineering 2006, 12:499-507.
99. Shimizu T., Sekine H., Yang J., Isoi Y., Yamato M., Kikuchi A., et al. Polysurgery of cell sheet grafts overcomes diffusion limits to produce thick, vascularized myocardial tissues. The FASEB Journal 2006, 6:708-710.
100. Shimizu T., Yamato M., Akutsu T., Shibata T., Isoi Y., Kikuchi A., et al. Electrically communicating three-dimensional cardiac tissue mimic fabricated by layered cultured cardiomyocyte sheets. Journal of Biomedical Materials Research 2002, 60:110-117.
101. Shimizu T., Yamato M., Isoi Y., Akutsu T., Setomaru T., Abe K., et al. Fabrication of pulsatile cardiac tissue grafts using a novel 3-dimensional cell sheet manipulation technique and temperature-responsive cell culture surfaces. Circulation Research 2002, 90:e40.
102. Shimizu T., Yamato M., Kikuchi A., Okano T. Cell sheet engineering for myocardial tissue reconstruction. Biomaterials 2003, 24:2309-2316.
103. Shiroyanagi Y., Yamato M., Yamazaki Y., Toma H., Okano T. Transplantable urothelial cell sheets harvested noninvasively from temperature-responsive culture surfaces by reducing temperature. Tissue Engineering 2003, 9:1005-1012.
104. Shiroyanagi Y., Yamato M., Yamazaki Y., Toma H., Okano T. Urothelium regeneration using viable cultured urothelial cell sheets grafted on demucosalized gastric flaps. BJU International 2004, 93:1069-1075.
105. Stannett V.T. Radiation grafting - state-of-the-art. International Journal of Radiation Applications and Instrumentation. Part C. Radiation Physics and Chemistry 1990, 35:82-87.
106. Sui X., Di Luca A., Gunnewiek M.K., Kooij E.S., Van Blitterswijk C.A., Moroni L., et al. Stability and cell adhesion properties of poly(N-isopropylacrylamide) brushes with variable grafting densities. Australian Journal of Chemistry 2011, 64:1261-1268.
107. Takagi R., Murakami D., Kondo M., Ohki T., Sasaki R., Mizutani M., et al. Fabrication of human oral mucosal epithelial cell sheets for treatment of esophageal ulceration by endoscopic submucosal dissection. Gastrointestinal Endoscopy 2010, 72:1253-1259.
108. Takahashi H., Matsuzaka N., Nakayama M., Kikuchi A., Yamato M., Okano T. Terminally functionalized thermoresponsive polymer brushes for simultaneously promoting cell adhesion and cell sheet harvest. Biomacromolecules 2012, 13:253-260.
109. Takahashi H., Nakayama M., Yamato M., Okano T. Controlled chain length and graft density of thermoresponsive polymer brushes for optimizing cell sheet harvest. Biomacromolecules 2010, 11:1991-1999.
110. Takamizawa K., Shoda K., Matsuda T. Pull-out mechanical measurement of tissue-substrate adhesive strength: endothelial cell monolayer sheet formed on a thermoresponsive gelatin layer. Journal of Biomaterials Science Polymer Edition 2002, 13:81-94.
111. Takei Y.G., Aoki T., Sanui K., Ogata N., Sakurai Y., Okano T. Dynamic contact angle measurement of temperature-responsive surface properties for poly(N-isopropylacrylamide) grafted surfaces. Macromolecules 1994, 27:6163-6166.
112. Takezawa T., Mori Y., Yoshizato K. Cell culture on a thermo-responsive polymer surface. Nature Biotechnology 1990, 8:854-856.
113. Tamura A., Kobayashi J., Yamato M., Okano T. Temperature-responsive poly(N-isopropylacrylamide)-grafted microcarriers for large-scale non-invasive harvest of anchorage-dependent cells. Biomaterials 2012, 33:3803-3812.
114. Tamura A., Kobayashi J., Yamato M., Okano T. Thermally responsive microcarriers with optimal poly(N-isopropylacrylamide) grafted density for facilitating cell adhesion/detachment in suspension culture. Acta Biomaterilia 2012, 8:3904-3913.
115. Tamura A., Nishi M., Kobayashi J., Nagase K., Yajima H., Yamato M., et al. Simultaneous enhancement of cell proliferation and thermally induced harvest efficiency based on temperature-responsive cationic copolymer-grafted microcarriers. Biomacromolecules 2012, 13:1765-1773.
116. Tang Z., Akiyama Y., Yamato M., Okano T. Comb-type grafted poly(N-isopropylacrylamide) gel modified surfaces for rapid detachment of cell sheet. Biomaterials 2010, 31:7435-7443.
117. Tunc M., Cheng X., Ratner B.D., Meng E., Humayun M. Reversible thermosensitive glue for retinal implants. Retina 2007, 27:938-942.
118. Tunc M., Humayun M., Cheng X., Ratner B.D. A reversible thermosensitive adhesive for retinal implants: in vivo experience with plasma-deposited poly(N-isopropyl acrylamide). Retina 2008, 28:1338-1343.
119. Tunc M., Yildirim U., Yuksel H., Cheng X., Humayun M., Ratner B. Conjunctival impression cytology by using a thermosensitive adhesive: polymerized N-isopropyl acrylamide. Cornea 2009, 28:770-773. 10.1097/ICO.0b013e318196706d.
120. Van Wezel A.L. Growth of cell-strains and primary cells on micro-carriers in homogeneous culture. Nature 1967, 216:64-65.
121. Varghese V.M., Raj V., Sreenivasan K., Kumary T.V. In vitro cytocompatibility evaluation of a thermoresponsive NIPAAm-MMA copolymeric surface using L929 cells. Journal of Materials Science: Materials in Medicine 2010, 21:1631-1639.
122. Von Recum H., Kikuchi A., Yamato M., Sakurai Y., Okano T., Kim S.W. Growth factor and matrix molecules preserve cell function on thermally responsive culture surfaces. Tissue Engineering 1999, 5:251-265.
123. Von Recum H.A., Kim S.W., Kikuchi A., Okuhara M., Sakurai Y., Okano T. Novel thermally reversible hydrogel as detachable cell culture substrate. Journal of Biomedical Materials Research 1998, 40:631-639.
124. Wang L.S., Chow P.Y., Phan T.T., Lim I.J., Yang Y.Y. Fabrication and characterization of nanostructured and thermosensitive polymer membranes for wound healing and cell grafting. Advanced Functional Materials 2006, 16:1171-1178.
125. Washio K., Iwata T., Mizutani M., Ando T., Yamato M., Okano T., et al. Assessment of cell sheets derived from human periodontal ligament cells: a pre-clinical study. Cell and Tissue Research 2010, 341:397-404.
126. Watanabe E., Yamato M., Shiroyanagi Y., Tanabe K., Okano T. Bladder augmentation using tissue-engineered autologous oral mucosal epithelial cell sheets grafted on demucosalized gastric flaps. Transplantation 2011, 91:700-706.
127. Wischerhoff E., Uhlig K., Lankenau A., Borner H.G., Laschewsky A., Duschl C., et al. Controlled cell adhesion on PEG-based switchable surfaces. Angewandte Chemie International Edition in English 2008, 47:5666-5668.
128. Xue C., Choi B.-C., Choi S., Braun P.V., Leckband D.E. Protein adsorption modes determine reversible cell attachment on poly(N-isopropyl acrylamide) brushes. Advanced Functional Materials 2012, 22:2394-2401.
129. Xu F.J., Zhong S.P., Yung L.Y., Kang E.T., Neoh K.G. Surface-active and stimuli-responsive polymer-Si(100) hybrids from surface-initiated atom transfer radical polymerization for control of cell adhesion. Biomacromolecules 2004, 5:2392-2403.
130. Xu F.J., Zhong S.P., Yung L.Y., Tong Y.W., Kang E.T., Neoh K.G. Thermoresponsive comb-shaped copolymer-Si(100) hybrids for accelerated temperature-dependent cell detachment. Biomaterials 2006, 27:1236-1245.
131. Yakushiji T., Sakai K., Kikuchi A., Aoyagi T., Sakurai Y., Okano T. Graft architectural effects on thermoresponsive wettability changes of poly(N-isopropylacrylamide)-modified surfaces. Langmuir 1998, 14:4657-4662.
132. Yamada N., Okano T., Sakai H., Karikusa F., Sawasaki Y., Sakurai Y. Thermo-responsive polymeric surfaces: control of attachment and detachment of cultured cells. Die Makromolekulare Chemie Rapid Communications 1990, 11:571-576.
133. Yamato M., Okuhara M., Karikusa F., Kikuchi A., Sakurai Y., Okano T. Signal transduction and cytoskeletal reorganization are required for cell detachment from cell culture surfaces grafted with a temperature-responsive polymer. Journal of Biomedical Materials Research 1999, 44:44-52.
134. Yamato M., Utsumi M., Kushida A., Konno C., Kikuchi A., Okano T. Thermo-responsive culture dishes allow the intact harvest of multilayered keratinocyte sheets without dispase by reducing temperature. Tissue Engineering 2001, 7:473-480.
135. Yang H.S., Jeon O., Bhang S.H., Lee S.H., Kim B.S. Suspension culture of mammalian cells using thermosensitive microcarrier that allows cell detachment without proteolytic enzyme treatment. Cell Transplantation 2010, 19:1123-1132.
136. Yang J.M., Yang S.J., Lin H.T., Chen J.K. Modification of HTPB-based polyurethane with temperature-sensitive poly(N-isopropyl acrylamide) for biomaterial usage. Journal of Biomedical Materials Research Part B Applied Biomaterials 2007, 80:43-51.
137. Zhou J., Ellis A.V., Voelcker N.H. Recent developments in PDMS surface modification for microfluidic devices. Electrophoresis 2010, 31:2-16.
138. Zhou J., Khodakov D.A., Ellis A.V., Voelcker N.H. Surface modification for PDMS-based microfluidic devices. Electrophoresis 2012, 33:89-104.