Finite element simulation of ultrasonic wave propagation in a dental implant for biomechanical stability assessment

Biomechanics and Modeling in Mechanobiology

Volumn 14, Issue 5, 2015, Pages 1021-1032

  Vayron, Romain ^a   Nguyen, Vu Hieu ^a   Bosc, Romain ^a   Naili, Salah ^a   Haïat, Guillaume ^a  

^a Laboratoire de Modélisation et Simulation Multi Echelle   (France)

Author keywords

Biomechanical stability; Dental implant; Finite element; Guided waves; Osseointegration; Quantitative ultrasound (QUS)

Indexed keywords

BIOMECHANICS; BONE; FINITE ELEMENT METHOD; GUIDED ELECTROMAGNETIC WAVE PROPAGATION; IMPLANTS (SURGICAL); LIQUIDS; STABILITY; SYSTEM STABILITY; ULTRASONIC WAVES; WAVE PROPAGATION;

3D FINITE ELEMENT MODEL; BIOMECHANICAL PROPERTIES; BIOMECHANICAL STABILITY; FINITE ELEMENT SIMULATIONS; IMPLANT INTERFACES; OSSEOINTEGRATION; QUANTITATIVE ULTRASOUNDS; ULTRASONIC RESPONSE;

DENTAL PROSTHESES;

ARTICLE; BIOMECHANICS; BONE REGENERATION; COMPARATIVE STUDY; FINITE ELEMENT ANALYSIS; GEOMETRY; PRIORITY JOURNAL; QUALITATIVE ANALYSIS; QUANTITATIVE STUDY; SENSITIVITY ANALYSIS; TOOTH IMPLANT; ULTRASOUND; VELOCITY; BIOLOGICAL MODEL; COMPUTER ASSISTED DIAGNOSIS; COMPUTER SIMULATION; DEVICE FAILURE ANALYSIS; ECHOGRAPHY; FRICTION; HUMAN; JAW; MOTION; PHYSIOLOGY; PROCEDURES; PROSTHESIS DESIGN; RADIATION SCATTERING; REPRODUCIBILITY; SENSITIVITY AND SPECIFICITY; SURGERY; TENSILE STRENGTH;

TOOTH IMPLANT;

COMPUTER SIMULATION; DENTAL IMPLANTS; EQUIPMENT FAILURE ANALYSIS; FINITE ELEMENT ANALYSIS; FRICTION; HUMANS; IMAGE INTERPRETATION, COMPUTER-ASSISTED; JAW; MODELS, BIOLOGICAL; MOTION; OSSEOINTEGRATION; PROSTHESIS DESIGN; REPRODUCIBILITY OF RESULTS; SCATTERING, RADIATION; SENSITIVITY AND SPECIFICITY; TENSILE STRENGTH; ULTRASONIC WAVES; ULTRASONOGRAPHY;

EID: 84941317964     PISSN: 16177959     EISSN: 16177940     Source Type: Journal    
DOI: 10.1007/s10237-015-0651-7     Document Type: Article

References (67)

1. Aparicio C, Lang NR, Rangert B (2006) Validity and clinical significance of biomechanical testing of implant/bone interface. Clin Oral Implant Res 17:2–7
2. Arndt C, Voigt C, Steinke H, von Salis-Soglio G, Scholz R (2012) Experimental evidence of impingement induced strains at the interface and the periphery of an embedded acetabular cup implant. J Biomech Eng T ASME 134
3. Balshi SF, Allen FD, Wolfinger GJ, Balshi TJ (2005) A resonance frequency analysis assessment of maxillary and mandibular immediately loaded implants. Int J Oral Maxillofac Implants 20:584–594
4. Bardyn T, Gedet P, Hallermann W, Buchler P (2009) Quantifying the influence of bone density and thickness on resonance frequency analysis: an in vitro study of biomechanical test materials. Int J Oral Maxillofac Implants 24:1006–1014
5. Blanco J, Alvarez E, Munoz F, Linares A, Cantalapiedra A (2011) Influence on early osseointegration of dental implants installed with two different drilling protocols: a histomorphometric study in rabbit. Clin Oral Implants Res 22:92–99
6. Blanes RJ, Bernard JP, Blanes ZM, Belser UC (2007) A 10-year prospective study of ITI dental implants placed in the posterior region. I: clinical and radiographic results. Clin Oral Implants Res 18:699–706
7. Capek L, Simunek A, Slezak R, Dzan L (2009) Influence of the orientation of the Osstell transducer during measurement of dental implant stability using resonance frequency analysis: a numerical approach. Med Eng Phys 31:764–769. doi:10.1016/j.medengphy.2009.02.003
8. Chang MC et al (2003) Elasticity of alveolar bone near dental implant–bone interfaces after one month’s healing. J Biomech 36:1209–1214. doi:10.1016/s0021-9290(03)001133-1
9. Coelho PG et al (2010) Biomechanical evaluation of endosseous implants at early implantation times: a study in dogs. J Oral Maxillofac Surg 68:1667–1675
10. de Almeida MS, Maciel CD, Pereira JC (2007) Proposal for an ultrasonic tool to monitor the osseointegration of dental implants. Sensors 7:1224–1237
11. Franchi M et al (2007) Influence of different implant surfaces on peri-implant osteogenesis: histomorphometric analysis in sheep. J Periodontol 78:879–888
12. Frost HM (2003) Bone’s mechanostat: a 2003 update. Anat Rec A Discov Mol Cell Evol Biol 275A:1081–1101
13. Gill A, Shellock FG (2012) Assessment of MRI issues at 3-Tesla for metallic surgical implants: findings applied to 61 additional skin closure staples and vessel ligation clips. J Cardiov Magn Reson 14
14. Glauser R, Sennerby L, Meredith N, Ree A, Lundgren A, Gottlow J, Hammerle CHF (2004) Resonance frequency analysis of implants subjected to immediate or early functional occlusal loading: successful vs. failing implants. Clin Oral Implant Res 15:428–434
15. Haïat G, Naili S, Vu MB, Desceliers C, Soize C (2011) Equivalent contributing depth investigated by a lateral wave with axial transmission in viscoelastic cortical bone. J Acoust Soc Am 129:114–120
16. Haïat G, Naili S, Grimal Q, Talmant M, Desceliers C, Soize C (2009) Influence of a gradient of material properties on ultrasonic wave propagation in cortical bone: application to axial transmission. J Acoust Soc Am 125:4043–4052
17. Haïat G, Naili S, Vu M-B, Desceliers C, Soize C (2011) Equivalent contributing depth investigated by a lateral wave with axial transmission in heterogeneous viscoelastic cortical bone. J Acoust Soc Am 129:EL114–EL120
18. Haïat G, Padilla F, Laugier P (2008) Fast wave propagation in trabecular bone: numerical study of the influence of porosity and structural anisotropy. J Acoust Soc Am 123:194–705
19. Haïat G, Padilla F, Peyrin F, Laugier P (2007) Variation of ultrasonic parameters with microstructure and material properties of trabecular bone: a 3D model simulation. J Bone Miner Res 22:665–674
20. Haïat G, Wang HL, Brunski JB (2014) Effects of biomechanical properties of the bone-implant interface on dental implant stability: from in silico approaches to the patient’s mouth. Annu Rev Biomed Eng 16:187–213
21. Hughes TJR (2000) The finite element method: linear static and dynamic finite element analysis. Dover civil and mechanical engineering. Dover Publications, Mineola, New York
22. Huja SS, Katona TR, Burr DB, Garetto LP, Roberts WE (1999) Microdamage adjacent to endosseous implants. Bone 25:217–222
23. Laugier P, Haïat G (2010) Bone quantitative ultrasound. Springer, Berlin
24. Luo GM, Sadegh AM, Alexander H, Jaffe W, Scott D, Cowin SC (1999) The effect of surface roughness on the stress adaptation of trabecular architecture around a cylindrical implant. J Biomech 32:275–284
25. Mathieu V, Anagnostou F, Soffer E, Haiat G (2011a) Numerical simulation of ultrasonic wave propagation for the evaluation of dental implant biomechanical stability. J Acoust Soc Am 129:4062–4072
26. Mathieu V, Anagnostou F, Soffer E, Haiat G (2011b) Ultrasonic evaluation of dental implant biomechanical stability: an in vitro study. Ultrasound Med Biol 37:262–270
27. Mathieu V et al (2011c) Micro-Brillouin scattering measurements in mature and newly formed bone tissue surrounding an implant. J Biomech Eng T ASME 133:021006–021006
28. Mathieu V, Vayron R, Richard G, Lambert G, Naili S, Meningaud JP, Haiat G (2014) Biomechanical determinants of the stability of dental implants: influence of the bone–implant interface properties. J Biomech 47:3–13
29. Mathieu V, Vayron R, Soffer E, Anagnostou F, Haiat G (2012) Influence of healing time on the ultrasonic response of the bone–implant interface. Ultrasound Med Biol 38:611–618
30. Meredith N, Alleyne D, Cawley P (1996) Quantitative determination of the stability of the implant–tissue interface using resonance frequency analysis. Clin Oral Implant Res 7:261–267
31. Meredith N, Friberg B, Sennerby L, Aparicio C (1998) Relationship between contact time measurements and PTV values when using the Periotest to measure implant stability. Int J Prosthodont 11:269–275
32. Meredith N, Shagaldi F, Alleyne D, Sennerby L, Cawley P (1997) The application of resonance frequency measurements to study the stability of titanium implants during healing in the rabbit tibia. Clin Oral Implant Res 8:234–243
33. Merheb J, Van Assche N, Coucke W, Jacobs R, Naert I, Quirynen M (2010) Relationship between cortical bone thickness or computerized tomography-derived bone density values and implant stability. Clin Oral Implants Res 21:612–617
34. Naili S, Vu MB, Grimal Q, Talmant M, Desceliers C, Soize C, Haiat G (2010) Influence of viscoelastic and viscous absorption on ultrasonic wave propagation in cortical bone: application to axial transmission. J Acoust Soc Am 127:2622–2628
35. Njeh CF, Hans D, Wu C, Kantorovich E, Sister M, Fuerst T, Genant HK (1999) An in vitro investigation of the dependence on sample thickness of the speed of sound along the specimen. Med Eng Phys 21:651–659
36. Nkenke E, Hahn M, Weinzierl K, Radespiel-Troger M, Neukam FW, Engelke K (2003) Implant stability and histomorphometry: a correlation study in human cadavers using stepped cylinder implants. Clin Oral Implants Res 14:601–609
37. Pattijn V et al (2007) Resonance frequency analysis of implants in the guinea pig model: influence of boundary conditions and orientation of the transducer. Med Eng Phys 29:182–190
38. Pattijn V, Van Lierde C, Van der Perre G, Naert I, Sloten JV (2006) The resonance frequencies and mode shapes of dental implants: rigid body behaviour versus bending behaviour—a numerical approach. J Biomech 39:939–947
39. Rabel A, Kohler SG, Schmidt-Westhausen AM (2007) Clinical study on the primary stability of two dental implant systems with resonance frequency analysis. Clin Oral Invest 11:257–265
40. Raghavendra S, Wood MC, Taylor TD (2005) Early wound healing around endosseous implants: a review of the literature. Int J Oral Maxillofac Implants 20:425–431
41. Sansalone V, Bousson V, Naili S, Bergot C, Peyrin F, Laredo JD, Haiat G (2012) Anatomical distribution of the degree of mineralization of bone tissue in human femoral neck: impact on biomechanical properties. Bone 50:876–884
42. Sansalone V et al (2010) Determination of the heterogeneous anisotropic elastic properties of human femoral bone: from nanoscopic to organ scale. J Biomech 43:1857–1863. doi:10.1016/j.jbiomech.2010.03.034
43. Sasso M, Haiat G, Talmant M, Laugier P, Naili S (2008a) Singular value decomposition-based wave extraction in axial transmission: application to cortical bone ultrasonic characterization. IEEE Trans Ultrason Ferroelectr Freq Control 55:1328–1332
44. Sasso M, Haiat G, Yamato Y, Naili S, Matsukawa M (2007) Frequency dependence of ultrasonic attenuation in bovine cortical bone: an in vitro study. Ultrasound Med Biol 33:1933–1942
45. Sasso M, Haiat G, Yamato Y, Naili S, Matsukawa M (2008b) Dependence of ultrasonic attenuation to bone mass and microstructure in bovine cortical bone. J Biomech 41:347–355
46. Schulte W et al (1983) Periotest: a new measurement process for periodontal function. Zahnarztl Mitt 73:1229–1230
47. Seong WJ, Kim UK, Swift JQ, Hodges JS, Ko CC (2009) Correlations between physical properties of jawbone and dental implant initial stability. J Prosthet Dent 101:306–318
48. Serra G, Morais LS, Elias CN, Meyers MA, Andrade L, Muller C, Muller M (2008) Sequential bone healing of immediately loaded mini-implants. Am J Orthod Dentofacial Orthop 134:44–52
49. Shalabi MM, Wolke JGC, Cuijpers V, Jansen JA (2007) Evaluation of bone response to titanium-coated polymethyl methacrylate resin (PMMA) implants by X-ray tomography. J Mater Sci Mater Med 18:2033–2039
50. Souffrant R, Zietz C, Fritsche A, Kluess D, Mittelmeier W, Bader R (2012) Advanced material modelling in numerical simulation of primary acetabular press-fit cup stability. Comput Methods Biomech Biomed Eng 15:787–793
51. Turkyilmaz I, Aksoy U, McGlumphy EA (2008) Two alternative surgical techniques for enhancing primary implant stability in the posterior Maxilla: a clinical study including bone density, insertion torque, and resonance frequency analysis data. Clin Implant Dent Rel Res 10:231–237
52. Turkyilmaz I, Tozum TF, Tumer C, Ozbek EN (2006) Assessment of correlation between computerized tomography values of the bone, and maximum torque and resonance frequency values at dental implant placement. J Oral Rehabil 33:881–888
53. Turkyilmaz I, Tumer C, Ozbek EN, Tozum TF (2007) Relations between the bone density values from computerized tomography, and implant stability parameters: a clinical study of 230 regular platform implants. J Clin Periodontol 34:716–722
54. Valderrama P, Oates TW, Jones AA, Simpson J, Schoolfield JD, Cochran D (2007) Evaluation of two different resonance frequency devices to detect implant stability: a clinical trial. J Periodont 78:262–272
55. Van Scotter DE, Wilson CJ (1991) The Periotest method for determining implant success. J Oral Implantol 17:410–413
56. Vayron R, Barthel E, Mathieu V, Soffer E, Anagnostou F, Haiat G (2011) Variation of biomechanical properties of newly formed bone tissue determined by nanoindentation as a function of healing time. Comput Methods Biomech Biomed Eng 14:139–140
57. Vayron R, Barthel E, Mathieu V, Soffer E, Anagnostou F, Haiat G (2012) Nanoindentation measurements of biomechanical properties in mature and newly formed bone tissue surrounding an implant. J Biomech Eng 134:021007
58. Vayron R et al (2013) Variation of the ultrasonic response of a dental implant embedded in tricalcium silicate-based cement under cyclic loading. J Biomech 46:1162–1168
59. Vayron R, Mathieu V, Michel A, Haïat G (2014a) Assessment of in vitro dental implant primary stability using an ultrasonic method. Ultrasound Med Biol 40(12):2885–2894
60. Vayron R, Soffer E, Anagnostou F, Haïat G (2014b) Ultrasonic evaluation of dental implant osseointegration. J Biomech47(14):3562–3568
61. Vayron R, Matsukawa M, Mathieu V, Barthel E, Soffer E, Anagnostou F, Haiat G (2014c) Evolution of bone biomechanical properties at the micrometer scale around titanium implant as a function of healing time. Phys Med Biol 59:1389–1406
62. Viceconti M, Brusi G, Pancanti A, Cristofolini L (2006) Primary stability of an anatomical cementless hip stem: a statistical analysis. J Biomech 39:1169–1179. doi:10.1016/j.jbiomech.2005.03.024
63. Viceconti M, Monti L, Muccini R, Bernakiewicz M, Toni A (2001) Even a thin layer of soft tissue may compromise the primary stability of cementless hip stems. Clin Biomech 16:765–775
64. Wang JY, Tozzi G, Chen J, Contal F, Lupton C, Tong J (2010a) Bone–cement interfacial behaviour under mixed mode loading conditions. J Mech Behav Biomed Mater 3:392–398
65. Wang ZQ, Zhao ZH, Xue J, Song JL, Deng F, Yang P (2010b) Pullout strength of miniscrews placed in anterior mandibles of adult and adolescent dogs: a microcomputed tomographic analysis. Am J Orthod Dentofac Orthop 137:100–107
66. Winter W, Mohrle S, Holst S, Karl M (2010) Parameters of implant stability measurements based on resonance frequency and damping capacity: a comparative finite element analysis. Int J Oral Maxillofac Implants 25:532–539
67. Zhao LX, Xu ZR, Yang Z, Wei X, Tang T, Zhao ZH (2009) Orthodontic mini-implant stability in different healing times before loading: a microscopic computerized tomographic and biomechanical analysis. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 108:196–202