Numerical simulation of ultrasonic wave propagation for the evaluation of dental implant biomechanical stability

Journal of the Acoustical Society of America

Volumn 129, Issue 6, 2011, Pages 4062-4072

  Mathieu, Vincent ^a   Anagnostou, Fani ^a,c   Soffer, Emmanuel ^a,c   Haiat, Guillaume ^b  

^a CNRS   (France)

^b UNIVERSITÉ PARIS EST CRÉTEIL   (France)

^c UNIVERSITÉ PARIS DESCARTES   (France)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMECHANICS; BONE; NUMERICAL MODELS; ULTRASONIC WAVES; WAVE PROPAGATION;

BIOMECHANICAL PROPERTIES; BIOMECHANICAL STABILITY; BONE-IMPLANT INTERFACES; CORTICAL THICKNESS; IMPLANT STABILITY; QUANTITATIVE ULTRASOUND TECHNIQUES; REPRODUCIBILITIES; ULTRASONIC RESPONSE;

DENTAL PROSTHESES;

EID: 79959456575     PISSN: 00014966     EISSN: None     Source Type: Journal    
DOI: 10.1121/1.3586788     Document Type: Article

References (58)

1. Akca, K., Chang, T. L., Tekdemir, I., and Fanuscu, M. I. (2006). Biomechanical aspects of initial intraosseous stability and implant design: A quantitative micro-morphometric analysis., Clin. Oral Implant. Res. 17, 465-472. (Pubitemid 44114714)
2. Albrektsson, T., Dahl, E., Enbom, L., Engevall, S., Engquist, B., Eriksson, A. R., Feldmann, G., Freiberg, N., Glantz, P. O., Kjellman, O., Kristersson, L., Kvint, S., Kondell, P. A., Palmquist, J., Werndahl, L., and Astrand, P. (1988). Osseointegrated oral implants-a Swedish multicenter study of 8139 consecutively inserted nobelpharma implants., J. Periodont. 59, 287-296.
3. Aparicio, C., Lang, N. R., and Rangert, B. (2006). Validity and clinical significance of biomechanical testing of implant/bone interface., Clin. Oral Implant. Res. 17, 2-7. (Pubitemid 44327693)
4. Bardyn, T., Gedet, P., Hallermann, W., and Buchler, P. (2009). Quantifying the influence of bone density and thickness on resonance frequency analysis: An in vitro study of biomechanical test materials., Int. J. Oral Maxillofac. Implants 24, 1006-1014.
5. Batenburg, R. H. K., Meijer, H. J. A., Geraets, W. G. M., and van der Stelt, P. F. (1998). Radiographic assessment of changes in marginal bone around endosseous implants supporting mandibular overdentures., Dentomaxillofac. Radiol. 27, 221-224. (Pubitemid 128499472)
6. Blanes, R. J., Bernard, J. P., Blanes, Z. M., and Belser, U. C. (2007). A 10-year prospective study of ITI dental implants placed in the posterior region. I: Clinical and radiographic results., Clin. Oral Implants Res. 18, 699-706.
7. Bossy, E., Laugier, P., Peyrin, F., and Padilla, F. (2007). Attenuation in trabecular bone: A comparison between numerical simulation and experimental results in human femur., J. Acoust. Soc. Am. 122, 2469-2475. (Pubitemid 47493373)
8. Bossy, E., Talmant, M., and Laugier, P. (2002). Effect of bone cortical thickness on velocity measurements using ultrasonic axial transmission: A 2D simulation study., J. Acoust. Soc. Am. 112, 297-307. (Pubitemid 34752175)
9. Bossy, E., Talmant, M., and Laugier, P. (2004). Three-dimensional simulations of ultrasonic axial transmission velocity measurement on cortical bone models., J. Acoust. Soc. Am. 115, 2314-2324. (Pubitemid 38542146)
10. Bragger, U. (1998). Use of radiographs in evaluating success, stability and failure in implant dentistry., Periodontol 2000 17, 77-88. (Pubitemid 128556019)
11. Bragger, U., Burgin, W., Fourmoussis, I., and Lang, N. P. (1992). Image processing for the evaluation of dental implants., Dentomaxillofac Radiol 21, 208-212.
12. Branemark, P. I., Svensson, B., and Vansteenberghe, D. (1995). 10-Year survival rates of fixed prostheses on 4 or 6 implants ad-modum Branemark in full edentulism., Clin. Oral Implant. Res. 6, 227-231.
13. Buser, D., Dula, K., Lang, N. P., and Nyman, S. (1996). Long-term stability of osseointegrated implants in bone regenerated with the membrane technique-5-year results of a prospective study with 12 implants., Clin. Oral Implant. Res. 7, 175-183. (Pubitemid 126670515)
14. Buser, D., MericskeStern, R., Bernard, J. P., Behneke, A., Behneke, N., Hirt, H. P., Belser, U. C., and Lang, N. P. (1997). Long-term evaluation of non-submerged ITI implants. 1. 8-year life table analysis of a prospective multi-center study with 2359 implants., Clin. Oral Implant. Res. 8, 161-172. (Pubitemid 127688451)
15. Collino, F., and Tsogka, C. (2001). Application of the perfectly matched absorbing layer model to the linear elastodynamic problem in anisotropic heterogeneous media., Geophysics 66, 294-307. (Pubitemid 32281950)
16. de Almeida, M. S., Maciel, C. D., and Pereira, J. C. (2007). Proposal for an ultrasonic tool to monitor the osseointegration of dental implants., Sensors 7, 1224-1237.
17. Franchi, M., Bacchelli, B., Giavaresi, G., De Pasquale, V., Martini, D., Fini, M., Giardino, R., and Ruggeri, A. (2007). Influence of different implant surfaces on peri-implant osteogenesis: histomorphometric analysis in sheep., J. Periodontol. 78, 879-888.
18. Frederiksen, N. L. (1995). Diagnostic-imaging in dental implantology., Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 80, 540-554.
19. Frost, H. M. (2003). Bone's mechanostat: A 2003 update., Anat. Rec. Part A 275A, 1081-1101. (Pubitemid 37486785)
20. Galaz, B., Haiat, G., Berti, R., Taulier, N., Amman, J. J., and Urbach, W. (2010). Experimental validation of a time domain simulation of high frequency ultrasonic propagation in a suspension of rigid particles., J. Acoust. Soc. Am. 127, 148-154.
21. Goodacre, C. J., Kan, J. Y. K., and Rungcharassaeng, K. (1999). Clinical complications of osseointegrated implants., J. Prosthet. Dent. 81, 537-552.
22. Graves, R. W. (1996). Simulating seismic wave propagation in 3D elastic media using staggered-grid finite differences., Bull. Seismol. Soc. Am. 86, 1091-1106.
23. Haiat, G., Padilla, F., Barkmann, R., Kolta, S., Latremouille, C., Gluer, C. C., and Laugier, P. (2005). In vitro speed of sound measurement at intact human femur specimens., Ultrasound Med. Biol. 31, 987-996. (Pubitemid 40828638)
24. Haiat, G., Padilla, F., Peyrin, F., and Laugier, P. (2007). Variation of ultrasonic parameters with microstructure and material properties of trabecular bone: A 3D model simulation., J. Bone Mineral Res. 22, 665-674. (Pubitemid 351339094)
25. Haiat, G., Padilla, F., Peyrin, F., and Laugier, P. (2008). Fast wave ultrasonic propagation in trabecular bone: Numerical study of the influence of porosity and structural anisotropy., J. Acoust. Soc. Am. 123, 1694-1705. (Pubitemid 351379595)
26. Laugier, P., and Haiat, G. (2011). Bone Quantitative Ultrasound (Springer, New York), pp 1-468.
27. Mathieu, V., Anagnostou, F., Soffer, E., and Haiat, G. (2011a). Ultrasonic evaluation of dental implant biomechanical stability an in vitro study., J. Acoust. 37, 262-270.
28. Mathieu, V., Fukui, K., Matsukawa, M., Kawabe, M., Vayron, R., Soffer, E., Anagnostou, F., and Haiat, G. (2011b). Micro-Brillouin scattering measurements in mature and newly formed bone tissue surrounding an implant., J. Biomech. Eng. 133, 021006.
29. Meredith, N. (1998). Assessment of implant stability as a prognostic determinant., Int. J. Prosthodont. 11, 491-501. (Pubitemid 128513406)
30. Meredith, N., Alleyne, D., and Cawley, P. (1996). Quantitative determination of the stability of the implant-tissue interface using resonance frequency analysis., Clin. Oral Implants Res. 7, 261-267. (Pubitemid 126670532)
31. Meredith, N., Friberg, B., Sennerby, L., and Aparicio, C. (1998). Relationship between contact time measurements and PTV values when using the Periotest to measure implant stability., Int. J. Prosthodont. 11, 269-275. (Pubitemid 128505811)
32. Merheb, J., Van Assche, N., Coucke, W., Jacobs, R., Naert, I., and Quirynen, M. (2010). Relationship between cortical bone thickness or computerized tomography-derived bone density values and implant stability., Clin. Oral Implants Res. 21, 612-617.
33. Mombelli, A., and Lang, N. P. (1994). Clinical parameters for the evaluation of dental implants., Periodontol 2000 4, 81-86.
34. Nedir, R., Bischof, M., Briaux, J. M., Beyer, S., Szmukler-Moncler, S., and Bernard, J. P. (2004). A 7-year life table analysis from a prospective study on ITI implants with special emphasis on the use of short implants-Results from a private practice., Clin. Oral Implant. Res. 15, 150-157. (Pubitemid 40109798)
35. Njeh, C. F. (1999). Ultrasonic Studies of Cortical Bone In vitro, in Quantitative Ultrasound Assessment of Osteoporosis and Bone Status (Martin Dunitz, London), p. 177.
36. Nkenke, E., Hahn, M., Weinzierl, K., Radespiel-Troger, M., Neukam, F. W., and Engelke, K. (2003). Implant stability and histomorphometry: A correlation study in human cadavers using stepped cylinder implants., Clin. Oral Implants Res. 14, 601-609. (Pubitemid 37463770)
37. Pattijn, V., Jaecques, S. V. N., De Smet, E., Muraru, L., Van Lierde, C., Van der Perre, G., Naert, I., and Sloten, J. V. (2007). Resonance frequency analysis of implants in the guinea pig model: Influence of boundary conditions and orientation of the transducer., Med. Eng. Phys. 29, 182-190. (Pubitemid 44827823)
38. Pattijn, V., Van Lierde, C., Van der Perre, G., Naert, I., and Sloten, J. V. (2006). The resonance frequencies and mode shapes of dental implants: Rigid body behaviour versus bending behaviour. A numerical approach., J. Biomech. 39, 939-947. (Pubitemid 43243782)
39. Rabel, A., Kohler, S. G., and Schmidt-Westhausen, A. M. (2007). Clinical study on the primary stability of two dental implant systems with resonance frequency analysis., Clin. Oral Invest. 11, 257-265.
40. Sansalone, V., Naili, S., Bousson, V., Bergot, C., Peyrin, F., Zarka, J., Laredo, J. D., and Haiat, G. (2010). Determination of the heterogeneous anisotropic elastic properties of human femoral bone: From nanoscopic to organ scale., J. Biomech. 43, 1857-1863.
41. Sasso, M., Haiat, G., Talmant, M., Laugier, P., and Naili, S. (2008). Singular value decomposition-based wave extraction in axial transmission: Application to cortical bone ultrasonic characterization., IEEE Trans. Ultrason. Ferroelectr. Freq. Control 55, 1328-1332.
42. Sbordone, L., Toti, P., Menchini-Fabris, G., Sbordone, C., and Guidetti, F. (2009). Implant survival in maxillary and mandibular osseous onlay grafts and native bone: A 3-year clinical and computerized tomographic follow-up., Int. J. Oral Maxillofac. Implants 24, 695-703.
43. Schnitman, P. A., Wohrle, P. S., Rubenstein, J. E., DaSilva, J. D., and Wang, N. H. (1997). Ten-year results for Branemark implants immediately loaded with fixed prostheses at implant placement., Int. J. Oral Maxillofac. Implants 12, 495-503. (Pubitemid 127500402)
44. Schulte, W., d'Hoedt, B., Lukas, D., Muhlbradt, L., Scholz, F., Bretschi, J., Frey, D., Gudat, H., Konig, M., and Markl, M. (1983). Periotest-a new measurement process for periodontal function., Zahnarztl Mitt 73, 1229-1240.
45. Seong, W. J., Kim, U. K., Swift, J. Q., Hodges, J. S., and Ko, C. C. (2009). Correlations between physical properties of jawbone and dental implant initial stability., J. Prosthet. Dent. 101, 306-318.
46. Serra, G., Morais, L. S., Elias, C. N., Meyers, M. A., Andrade, L., Muller, C., and Muller, M. (2008). Sequential bone healing of immediately loaded mini-implants., Am. J. Orthod. Dentofacial Orthop. 134, 44-52.
47. Shalabi, M. M., Wolke, J. G. C., Cuijpers, V., and Jansen, J. A. (2007). Evaluation of bone response to titanium-coated polymethyl methacrylate resin (PMMA) implants by x-ray tomography., J. Mater. Sci.-Mater. Med. 18, 2033-2039. (Pubitemid 47415794)
48. Turkyilmaz, I., Aksoy, U., and McGlumphy, E. A. (2008). Two alternative surgical techniques for enhancing primary implant stability in the posterior maxilla: A clinical study including bone density, insertion torque, and resonance frequency analysis data., Clin. Implant Dent. Relat. Res. 10, 231-237.
49. Turkyilmaz, I., Tozum, T. F., Tumer, C., and Ozbek, E. N. (2006). Assessment of correlation between computerized tomography values of the bone, and maximum torque and resonance frequency values at dental implant placement., J. Oral Rehab. 33, 881-888. (Pubitemid 44807558)
50. Turkyilmaz, U., Tumer, C., Ozbek, E. N., and Tozum, T. F. (2007). Relations between the bone density values from computerized tomography, and implant stability parameters: A clinical study of 230 regular platform implants., J. Clin. Periodontol. 34, 716-722.
51. Valderrama, P., Oates, T. W., Jones, A. A., Simpson, J., Schoolfield, J. D., and Cochran, D. L. (2007). Evaluation of two different resonance frequency devices to detect implant stability: A clinical trial., J. Periodont. 78, 262-272.
52. Van Scotter, D. E., and Wilson, C. J. (1991). The Periotest method for determining implant success., J. Oral Implantol. 17, 410-413.
53. Verhoeven, J. W., Cune, M. S., and de Putter, C. (2000). Reliability of some clinical parameters of evaluation in implant dentistry., J. Oral Rehabil. 27, 211-216.
54. Virieux, J. (1986). P-Sv-wave propagation in heterogeneous media-velocity-stress finite-difference method., Geophysics 51, 889-901. (Pubitemid 16521733)
55. Wang, Z. Q., Zhao, Z. H., Xue, J., Song, J. L., Deng, F., and Yang, P. (2010). Pullout strength of miniscrews placed in anterior mandibles of adult and adolescent dogs: A microcomputed tomographic analysis., Am. J. Orthod. Dentofac. Orthop. 137, 100-107.
56. Winter, W., Heckmann, S. M., and Weber, H. P. (2004). A time-dependent healing function for immediate loaded implants., J. Biomech. 37, 1861-1867. (Pubitemid 39440498)
57. Winter, W., Mohrle, S., Holst, S., and Karl, M. (2010). Parameters of implant stability measurements based on resonance frequency and damping capacity: A comparative finite element analysis., Int. J. Oral Maxillofac. Implants 25, 532-539.
58. Zhao, L. X., Xu, Z. R., Yang, Z., Wei, X., Tang, T., and Zhao, Z. H. (2009). Orthodontic mini-implant stability in different healing times before loading: A microscopic computerized tomographic and biomechanical analysis., Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 108, 196-202.