Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair: Second Edition

Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair: Second Edition

Volumn 9781118057063, Issue , 2014, Pages 1-643

  Stone, Greg C ^a   Culbert, Ian ^a   Boulter, Edward A ^a   Dhirani, Hussein ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

COSTS; FAILURE (MECHANICAL); FRACTIONAL HORSEPOWER MOTORS; INSULATION; MACHINE SHOPS; MANUFACTURE; REPAIR; ROTATING MACHINERY; ROTORS (WINDINGS); STATORS; WINDING;

DESIGN AND MANUFACTURES; ELECTRICAL FAILURES; ELECTRICAL INSULATION SYSTEMS; GENERATOR MAINTENANCE; MAINTENANCE STRATEGIES; MANUFACTURING METHODS; ROTATING MACHINE INSULATION; WINDING INSULATION;

MACHINE WINDINGS;

EID: 84926077326     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118886663     Document Type: Book

References (358)

1. S. J. Chapman, Electric Machine Fundamentals, 5th ed., McGraw-Hill, 2012.
2. M. G. Say, Alternating Current Machines, 4th ed., Pitman Publishing, 1976.
3. G. Klempner and I. Kerszenbaum, "Handbook of Large Turbo-Generator Operation and Maintenance", 2nd ed., Wiley-IEEE Press, 2008.
4. T. Kuwabara et al., "Design and Dynamic Response Characteristics of 400MW Adjustable Speed Pumped Storage Unit for Ohkawachi Power Station", IEEE Trans EC, Vol. 11, 1996, 376-384.
5. M. V. R. Skov Jensen, "Wind Turbines: Electrical System Design, Operating Environment and Maintenance Issues", Iris Rotating Machine Conference, New Orleans, May 2009.
6. M. Melfi, S. Evon, and R. Mcelvan, "Induction vs. Permanent Magnet Motors", IEEE Industrial Applications Magazine, November 2009, pp 28-35.
7. IEC Standard 60034, "Rotating Electric Machines-Part 5, Classification of Degrees of Protection Provided by Enclosures: Part 6. Methods of Cooling".
8. NEMA Standard MG 1-1998, "Motors and Generators".
9. B. E. B. Gott, "Application of Air-Cooled Generators to Modern Power Plants", IEEE Electric Machines and Drives Conference, Seattle, May 1999, pp. 317-319.
10. A. P. Kopp et al., "Comparison of Maximum Rated Air-Cooled Turbogenerators with Modern Hydrogen Cooled Generators", CIGRE Paper 11-202, September 1992.
11. L. Dingzhong, "Selection of Cooling Mode for Giant Hydrogenerator", In Proceedings of CIGRE Colloquium on New Developments of Rotating Electrical Machines, Beijing, September 2011, pp 117-124.
12. P. Zhang, Y. Du, T.G.Habetler, and B. Lu, "A Survey of Condition Monitoring and Protection Methods for Medium Voltage Induction Motors", IEEE T Ind Appl, Vol. 47, 2011, 34-46.
13. B. J. Moore, R. H. Rehder, and R. E. Draper, "Utilizing Reduced Build Concepts in the Development of Insulation Systems for Large Motors", In Proceedings of IEEE Electrical Insulation Conference, Cincinnati, October 1999, pp. 347-352.
14. R. Engelmann and W. H. Middendorf, Handbook of Electric Motors, Marcel Dekker, 1995.
15. P. Clark, N. Glew, and R. Regan, "Solutions for MV Motors and Generators in Hazardous Locations", In Proceedings of IEEE Petroleum and Chemical Industry Conference. Philadelphia, September 1996, pp. 49-60.
16. B. K. Gupta et al., "Turn Insulation Capability of Large AC Motors, Part 3-Insulation Coordination", IEEE Trans EC, 1987, 674-679.
17. C. V. Maughan, "Incapability of Analog Relay Protection to Detect Generator StatorWinding Ground Failures at Neutral End", Proceedings IEEE Electrical Insulation Conference, Ottawa, Canada, June 2013.
18. H. Katayama et al., "Development and Production of theWorld's Largest Capacity 2p- 60Hz-670MVA and 4p-60Hz-370MVA Hydrogen-Cooled Turbogenerators for a 60Hz-900MW Cross-Compound Thermal Power Plant", CIGRE Paper A1-102, Paris, September 2010.
19. F.T. Emery, M. Williams, "Preliminary Evaluation of Flat Glass Backed Mica Paper for HV Coil Groundwall Insulation using VPI", In Proceedings of IEEE Electrical Insulation Conference, Annapolis, MD, June 2009.
20. J. F. Calvert, "Forces in Turbine Generator Stator Windings", Trans of AIEE, 1931, 178-196.
21. IEEE Standard 100-2000: "IEEE Standard Dictionary of Electrical and Electronics Terms".
22. E. Kuffel, J. Kuffel, and W. S. Zaengl, High Voltage Engineering, Butterworth-Heinemann, 1998.
23. R. Bartnikas, "Corona Measurement and Interpretation", ASTM, STP 669, 1980.
24. J. H. Mason, "Breakdown of Solids in Divergent Fields", Proc IEE. Part B, Vol. 102, 1955, 725-727.
25. F. T. Emery, "The Application of Conductive and Stress Grading Tapes to VPI'd High Voltage Stator Coils", IEEE Electrical Insulation Magazine, July 1996, 15-22.
26. J. Thienpont and T. H. Sie, "Suppression of Surface Discharges in the StatorWindings of High Voltage Machines", CIGRE, June 1964.
27. M. Stranges, G. C. Stone, and D. Bogh, "Voltage Endurance Testing of Stator Insulation Systems for Inverter Fed Machines", IEEE Industry Applications Magazine, November 2009, 12-18.
28. E. Sharifi, S. Jayaram, and E. Cherney, "Analysis of Thermal Stresses in Medium Voltage Motor Coils Under Repetitive Fast and High Frequency Pulses", IEEE Trans DEI, 2010, 1378-1384.
29. J. C. G. Wheeler, "Effects of Converter Pulses on the Electrical Insulation in Low and MediumVoltage Motors". IEEE Electrical Insulation Magazine, March 2005, 22-28.
30. F. T. Emery, "Reduction Techniques of PD, Dissipation Factor and External Corona for HV Stator Windings", Proceedings of the IEEE Electrical Insulation Conference, Montreal, June 2009, pp. 315-327.
31. C. Hu, X. Yuan, X. He, and X. Zhang, "Study on the Effect of Different Internal Corona Protection and Electrical Properties of Generator Stator Bars", Proceedings of the IEEE International Conference on Properties and Applications of Dielectric Materials, Harbin, July 2009, pp. 196-199.
32. H. O. Ponce, B. Gott, and G. C. Stone, "Generator Endwinding Vibration Guide", EPRI Report PID 1021774, 2011.
33. D. S. Hyndman et al., "Twintone Bar/Slot Interface to Maximize the Benefits of Modern High Voltage Stator Ground Insulation", Proceedings of IEEE Electrical Insulation Conference, Chicago, October 1981.
34. K. Nyland and R. Schuler, "Insulation Systems for Synchronous Machines", Proceedings of International Conference on Synchronous Machines, Zurich, August 1991, pp. 182-188.
35. N. Didzun and F. Stobbe, "Indirect Cooled Generator Stator Windings with Micalastic Post Impregnation Technique", presented at ISOTEC Workshop 93, Section 4, Zurich, November 23-24, 1993.
36. R. Curiac, "Improvements in Energy Efficiency of Induction Motors by the Use of MagneticWedges", Proceedings of IEEE Petrochemical Industry Conference, September 2011.
37. M. R. Patel and J. M. Butler, "Endwinding Vibrations in Large Synchronous Generators", IEEE Trans PAS, Vol. 102, 1983, 1371-1377.
38. B. E. Gott, "Electromagnetic Forces in StatorWindings", EPRI Turbine Generator Users Group Meeting, Albany NY, August 2011.
39. J. M. Butler and H. J. Lehman, "Performance of New StatorWinding Support System for Large Generators", Proceedings of American Power Conference, 1984, p. 461.
40. S. Nagano et al., "Evaluation of Field Insulation of Turbine Generators with Higher Thyristor Excitation", IEEE Trans EC, Vol. 1, 1986, pp. 115-121.
41. R. Ilie and G. C. Stone, "Turbine Generator Rotor and StatorWinding Hipot Testing", IEEE Electrical Insulation Magazine, Vol. 28, 2012, pp. 29-37.
42. J. M. Hodge et al., "Generator Monitoring Systems in the United Kingdom", CIGRE Paper 11-08, September 1982.
43. K. Alewine and W. Chen, "A Review of Electrical Winding Failures in Wind Turbine Generators", IEEE Electrical Insulation Magazine, July 2012, pp. 8-13w.
44. B. J. Moore, R. H. Rehder, and R. E. Draper, "Utilizing Reduced Build Concepts in the Development of Insulation Systems for Large Motors", In Proceedings of IEEE Electrical Insulation Conference, Cincinnati, October 1999, pp. 347-352.
45. G. C. Stone et al., "Motor and Generator Windings - Recent Problems Experienced", IEEE Industry Applications Magazine, 2011, 29-36.
46. IEC Standard 60505, "Evaluation and Qualification of Electrical Insulation Systems".
47. T. W. Dakin, "Electrical Insulation Deterioration Treated as a Chemical Rate Phenomenon", AIEE Trans., Part 1, 67, 1948, 113-122.
48. M. Kurtz, J. F. Lyles, and G. C. Stone, "Application of Partial Discharge Testing to Hydro Generator Maintenance", IEEE Trans PAS, Vol. 103, 1984, 2588-2597.
49. IEEE Standard 930, "Guide for the Statistical Analysis of Electrical Insulation Voltage Endurance Test Data". Also published as IEC 62539.
50. S. Endicott, B. D. Hatch, and R. G. Sohmen, "Application of the Erying Model to Capacitor Aging Data", IEEE Trans. CP-I 2, Vol. 12, 1965, 34-40.
51. W.W.Cameron and M. Kurtz, "A Utility's Functional Evaluation Tests for High Voltage Stator Insulation", AIEE Trans. 78, Part III, 1959, 174-184.
52. A. Wichmann, "Accelerated Voltage Endurance Testing of Micaceous Insulation Systems for Large Turbogenerators Under Combined Stresses", IEEE Trans. PAS., 1977, 255-260.
53. D. R. Johnston et al., "Frequency Acceleration of Voltage Endurance", IEEE Trans EI, Vol. 14, 1979, 121-126.
54. IEC 61251, "Electrical Insulating Materials-AC Voltage Endurance Evaluation-Introduction", 2007.
55. E. Persson, "Transient Effects in Applications of PWM Inverters to Induction Motors", IEEE Trans. IA, Vol. 28, 1992, 1095-1102.
56. G. C. Stone, S. R. Campbell, and S. Tetreault, "Inverter Fed Drives: Which Motor Stators are at Risk", Industry Applications Magazine, Vol. 6, 2000, 17-22.
57. G. C. Stone, R. G. VanHeeswijk, and R. Bartnikas, "Investigation of the Effect of Repetitive Voltage Surges on Epoxy Insulation", IEEE Trans. EC, Vol. 7, 1992, 754-760.
58. J. P. Bellomo et al., "Influence of the Risetime on the Dielectric Behavior of StatorWinding Insulation Materials", in Proceedings of IEEE CEIDP, Octember 1996, pp. 472-476.
59. S. Nagano et al., "Evaluation of Field Insulation of Turbine Generators with Higher Thyristor Excitation", IEEE Trans. EC., Vol. 1, 1986, 115-121.
60. G. C. Stone et al., "Motor and Generator Insulation Life Estimation", EPRI Report TR-100185, January 1992.
61. P. Holzman, in "EPRI Motor Insulation System Seminar andWorkshop-Material Testing for Steam Tolerance", Norfolk, VA, September 19-21, 2000.
62. IEEE 1064, "IEEE Guide for Multifactor Stress Functional Testing of Electrical Insulation Systems".
63. IEC 60034-18-33, "Rotating Electrical Machines: Functional Evaluation of Insulation Systems: Test Procedures for Form-Wound Windings Multifactor Functional Evaluation-Endurance Under Combined Thermal and Electrical Stresses of Insulation Systems Used in Machines up to and Including 50 MVA and 15 kV".
64. G. W. Snedecor and W. G. Cochran, Statistical Methods, John Wiley, 1991.
65. J. F. Lawless, Statistical Models and Methods for Lifetime Data, 2nd edn., Wiley, 2002.
66. IEEE 101, "IEEE Guide for the Statistical Analysis of Thermal Life Test Data".
67. D. Gladstein, W. Nelson, and J. Schmee. "Confidence Limits for Parameters of a Normal Distribution from Singly Censored Samples Using Maximum Likelihood", Technometrics, Vol. 27, May 1985, 119-128.
68. IEC 60216, "Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials; Part 3-Instructions for Calculating Thermal Endurance Characteristics".
69. G. C. Stone, R. G. vanHeeswijk, and R. Bartnikas, "Electrical Aging and Electroluminescence in Epoxy Under Repetitive Voltage Surges", IEEE Trans. DEI, Volume 27, 1992, 233-244.
70. J. F. Lawless and G. C. Stone. "The Application ofWeibull Statistics to Insulation Aging Tests", IEEE Trans. EI, Vol. 14 1979, 233-238.
71. G. C. Stone, "The Statistics of Aging Models and Practical Reality", IEEE Trans. EI, Volume 28 1993, 716-728.
72. IEEE 1310, "Recommended Practice for Thermal Cycle Testing of Form-wound Stator Bars and Coils for Large Generators".
73. IEEE 1776, "Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15 000V and Below".
74. A. Kelen, "The Functional Testing of HV Generator Stator Insulation", CIGRE Paper 15-03, Paris, August 1976.
75. R. Schuler and G. Liptak, "Long Term Functional Test on Insulation Systems for High Voltage Rotating Machines", CIGRE 15-05, Paris, August 1976.
76. J. Carlier et al., "Ageing Under Voltage of the Insulation of Rotating Machines: Influence of Frequency and Temperature", CIGRE 15-06, Paris, August 1976.
77. A. Wichmann, "Two Decades of Experience and Progress in Epoxy Insulation Systems for Large Rotating Machines", IEEE Trans. PAS, Vol. 102, 1983, 74-82.
78. IEEE 1043, "IEEE Recommended Practice for Voltage Endurance Testing of Form-wound Bars and Coils".
79. IEEE 1553, "Standard for Voltage Endurance Testing of Form-Wound Bars and Coils for Hydrogenerators".
80. B. E. Ward, G. C. Stone, and M. Kurtz, "Quality Control Test for High Voltage Stator Insulation", IEEE Electrical Insulation Magazine, September 1987, 12-17.
81. S. E. Cherukupalli and G. L. Halldorson. "Using the Voltage Endurance Test to Ensure the Quality of Insulation in a Generator", Hydro Review, 1997, 48-57.
82. IEC 60034-18-32, "Rotating Electrical Machines -Functional Evaluation of Insulation Systems: Test Procedures for Form-WoundWindings-Electrical Evaluation of Insulation Systems Used in Machines up to and Including 50 MVA and 15 kV".
83. J. H. Krieg, "KEMA Specification for Hydrogen, Liquid and Air-Cooled Synchronous AC Generators Rated 5 kV and Above", KEMA Report No. S13/14, April 2009.
84. IEC 60034-18-42, "Rotating Electrical Machines: Qualification and Acceptance Tests for Partial Discharge Resistant Electrical Insulation Systems (Type II) Used in Rotating Electrical Machines Fed from Voltage Converters".
85. B. K. Gupta, "Development of a Type Test for Turn Insulation in Motor Coils", Proceedings of the IEEE Electrical Insulation Conference, October 1991, pp 50-54.
86. IEC 60034-18-34, "Rotating Electrical Machines: Functional Evaluation of Insulation Systems: Test Procedures for Form-Wound Windings-Evaluation of Thermomechanical Endurance of Insulation Systems".
87. IEEE Standard 323, "Standard for Qualification Testing Class IE Equipment for Nuclear Power Generating Stations".
88. IEEE 334,"Standard for Type Tests of Continuous Duty Class IE Motors for Nuclear Power Plants".
89. IEEE 344, "Recommended Practice for Seismic Qualification of Class IE Equipment for Nuclear Power Generating Stations".
90. EPRI TR 104872, "Guidelines for the Qualification of Insulation SystemforUse in Rewinding Nuclear Safety-Related Harsh Environment Motors", December, 1996.
91. P. Paloniemi, "Theory of Equalization of Thermal Aging Processes of Electrical Insulating Materials in Thermal Endurance Tests, Parts 1, 2 and 3", IEEE Trans. EI, 1981, pp. 1-30.
92. R. Morin, R. Bartnikas, "Multistress Aging of Stator Bars in a Three-Phase Model Stator Under Load Cycling Conditions", IEEE Trans EC, Vol. 27, 2012, 374-381.
93. R. Morin, R. Bartnikas, and P. Menard, "A Three-Phase Multi-Stress Accelerated Electrical Aging Test Facility for Stator Bars", IEEE Trans EC, Vol. 15, 2000, 149-156.
94. W. T. Shugg, "Electrical and Electronic Insulating Materials," 2nd ed., IEEE Press, 1995.
95. C. F. Hill, "Improvements in Insulation for High Voltage Generators", Proceedings of the AIEE, July 1928, pp. 845-852.
96. W. Tillar Shugg, Handbook of Electrical and Electronic Insulating Materials, IEEE Press, New York, 1995.
97. C. P. Steinmetz and B. G. Lamme, "Temperature and Electrical Insulation", AIEE Trans., 32, 1913, 79-89.
98. T. W. Dakin, "Electrical Insulation Deterioration Treated as a Chemical Rate Phenomenon", A1EE Trans., Part I . 67, 1948 113-122.
99. G. A. Cypher and R. Harrington, Functional Evaluation of Motor Insulation Systems AIEE Trans., Part III , 71, 1952, 251.
100. E. L. Brancato, L. M. Johnson, and H. P. Walker, "Functional Evaluation of Motorette Insulation Systems", Electrical Manufacturing, 1959, 146-153.
101. J. E. Neal, "The use of polyester filmin HV rotatingmachine insulation", Proceedings IEEE Electrical Insulation Conference, September 1995, pp. 583-587.
102. S. Ul Haq, R. Omranipour, "Accelerated Life Testing of HV Stator Coils with Enhanced PET-Mica Insulation System", Proceedings of the IEEE Electrical Insulation Conference, June 2011, pp. 478-481.
103. G. C. Stone et al., "Investigations of Turn Insulation Failure Mechanisms in Large AC Motors", IEEE Trans PAS, 103, 1984, 2588-2593.
104. G. C. Stone and H. Miller, "Progress in Rotating Machine Insulation Systems and Processing", IEEE Electrical Insulation Magazine, July 2013, 45-51.
105. N. Glew, "Design and Manufacture of Energy Efficient and Environmentally Friendly Large Machines", in IEE Power Division Colloquium 99/178, September 1999.
106. G. H. Miller, "Trends in Insulation Materials and Processes for Rotating Machines", IEEE Electrical Insulation Magazine, 1998, 7-11.
107. M. Laffoon, C. F. Hill, G. L. Moses, and L. J. Berberich, "A New High-Voltage Insulation for Turbine-Generator Stator Windings", AIEE Trans., 70(1), 1951, 721-730.
108. D. A. Rogers, Jr., "Synthetic Resins as Applied to Large Rotating Apparatus", In Proceedings of the Seventh Electrical Insulation Conference, IEEE Publication No. 32C79, 1967, pp. 100-102.
109. S. J. Stabile, "Extension of the Post Impregnation Concept to High Voltage Windings", in Proceedings of the Electrical Insulation Conference, IEEE Publication 73CHO 777-3E1, 1973, pp. 117-121.
110. J. Flynn, C. E. Kilbourne, and C. D. Richardson, "An Advanced Concept for Turbine-Generator Stator Winding Insulation", AIEE Trans. PAS., 77, 1958, 358-371.
111. H. N. Galpern and G. H. Vogt. "A New Class F Armature Insulation System for Turbine-Generators", in Proceedings of the Electrical Electronics Insulation Conference, IEEE Publication 77CH 1273-2-El, 1977, pp. 215-219.
112. A.Lister, R. Lefebvre, and L. Kohn. "Epoxy Mica Mat Class F Stator Groundwall Insulation", Proceedings' of the 16th Electrical Electronics Insulation Conference, IEEE Publication 83C111952-1, 1983, pp. 152-156.
113. N. V. Gjaja, C. V. Maughan, and W. R. Schultz, Jr. "A Second Generation Epoxy-Mica Paper Insulation System For Large Turbine-Generator Stator Windings", IEEE Trans. PAS. 97(I), 1978, pp 125-133.
114. L. Lynn, W. A. Gottung, D. R. Johnston, and J. T. LaForte, "Corona Resistant Turn Insulation In AC Rotating Machines." in Proceedings of the 17th Electrical/Electronics Insulation Conference, IEEE Publication No. 85C112133-7, 1985, pp. 308-310.
115. R. E. Draper and B. J. Moore, "Development of a Vertical Generator Stator Bar Insulation System for Operation at Increased Stress", in Proceedings of the Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Conference, IEEE Publication No. 97CH36075, 1997, pp. 597-602.
116. W. McDermid, "A Utility's Evaluation of a Stator Bar Insulation System Operating at Increased Electric Stress", in Proceedings: Electrical Insulation Conference and Electric-al Manufacturing and Coil Winding Conference. IEEE Publication No. 97CH36075, 1997, pp. 603-605.
117. J. Moore, R. H. Rehder, and R. E. Draper, "Utilizing Reduced Build Concepts in the Development of Insulation Systems For Large Motors", Proceedings: Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Conference, IEEE Catalog No. 99CH37035, 1999, pp. 347-352.
118. M. Markovitz, W. H. Ciottung, G. D. McClary, J. R. Richute, W. R. Schultz, Jr., and J. D. Sheaffer, "General Electric's Third Generation VPI Resin", in Proceedings of the 17th Electrical/Electronics Insulation Conference, IEEE Publication No. 85CH2133-7, 1985, pp. 110-1l4.
119. S. Ul Haq, R. Omranipour, "Accelerated Life Testing of High Voltage Stator Coils with Enhanced PET-Mica Insulation System", in Proceedings of the IEEE Electrical Insulation Conference, Annapolis, June 2011, pp 478-481.
120. P. Bonnet, "Trends in Resin-Rich Type High Voltage Insulation Systems", paper presented at ISOTEC WORKSHOP 93, Section 8, Zurich, November, 1993.
121. J. A. Nurse. "Evaluation of Impregnation Resins for Large High Voltage Rotating Electrical Machines", in Proceedings: Insucon-The 6th BEAMA International Electrical Insulation Conference and Exhibition, Harrogate, May 12-14 1998, pp. 10-19.
122. A. Anton, "New Developments in Resin-rich Insulation Systems for High Voltage Rotating Machines", in Proceedings of the Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Conference, IEEE Publication No. 97 01136075, 1997, pp. 607-618.
123. W. Mertens, H. Meyer, and A. Wichmann. "Micalastic-Insulation Experience and Progress", in Proceedings' of the Seventh Electrical Insulation Conference. IEEE Publication No. 32C79, 1967, pp. 103-106.
124. N. Didzun and F. Stobbe, "Indirect Cooled Generator Stator Windings with Micalastic Post Impregnation Technique", paper presented at Isotec WORKSHOP '93, Section 4, Zurich, November 23-24 1993.
125. B. Doljak, M. Moravec, and O. Wohlfahrt, "Micadur, a New Insulation for the Stator Windings of Electrical Machines", Brown Boveri Review, 47(5/6), 1960, 352-360.
126. R. H. Schuler, "Experience With Micadur Synthetic-Resin Insulation for Stator Windings of High Voltage Rotating Machines", in Proceedings of the 7th Electrical Insulation Conference, IEEE Publication No. 32C79, 1967, pp. 61-65.
127. T. Baumann, T. Hillmer, P. Klee, and D. Stoll, "Optimized Emission Free Production Process for Main Wall Insulation with Enhanced Propertied", in Proceedings of the IEEE Electrical Insulation Conference, Annapolis, June 2011, pp 184-189.
128. R. H. Schuler, "Post-Cured Insulation Provides Higher Service Reliability For Large High Voltage Motors", in Proceedings of the 9th Electrical Insulation Conference, IEEE Publication No. 69C33-E1, 1969, pp. 165-169.
129. R. H. Schuler, "Experience with Post Cured Insulation Systems for Large Form-wound Machines", in Proceedings of the 13th Electrical/Electronics Insulation Conference, IEEE Publication No. 77CH 1273-El, 1977, pp. 220-224.
130. R. Andersson and T. Orbeck "Evaluation of a New Development in High Voltage Insulation for Large Machines", IEEE Trans. PAS, 86(2), 1967, pp. 224-230.
131. R. Andersson and T. Orbeck, "Micapact Insulation", in Proceedings of the 6th Electrical Insulation Conference, IEEE, 1965, pp. 152-155.
132. M. Tani, N. Iwata, H. Ratan, H. Matsumoto, Y. Inoue, and T. Yoshimitsu, "Advanced Technology of Stator Coil Insulation System For Turbo-Generator", in Proceedings of Insucon/ISOTEC '98-The 8th BEAMA International Electrical Insulation Conference, May, 1998, pp. 79-86.
133. N. Urakawa, S. Takada, M. Tsukiji,W. Bito, A. Yamada, and T. Umemoto, "New High Voltage Insulation System for Air-Cooled Turbine Generators", in Proceedings of the Electrical Insulation Conference and Electrical Manufacturing and CoilWinding Conference, IEEE Publication No. 99CH37035, 1999, pp. 353-358.
134. S. Hirabayashi, K. Shibayama, S. Matsuda, and S. Roll, "Development of NewMica Paper Epoxy Insulation Systems for High Voltage Rotating Machine", in Proceedings of the IEEE Electrical Insulation Conference, 1973, pp. 90-91.
135. F. Aki, K. Matsunobu, M. Taniguchi, S. Isobe, K. Kaneko, and M. Sakai, "Super Hi-Resin Insulation System for Stator Coils of Large Rotating Machines", Hitachi Rev., 23(3), 1973, 559-575.
136. S. Fujimoto, K. Tanaka, K. Matsunobu, S. Isobe, K. Kaneko, and M. Sakai, "Hi-Mold Insulation System for Stator Coils of Large Rotating Machines", Hitachi Hyoron, 54, 1971, 611.
137. L. Chunlianand M. Yuquang "The Development of Insulation Materials in Harbin Electric Machinery", in Proceedings CIGRE A1 Colloquim, Beijing, September 2011, pp 10-18.
138. J. Feally, "Performance By Design", Power Eng., 2004, 98-110.
139. M. Tani et al., "Impacts on Turbine Generator Design by the Application of Increased Thermal Conducting Stator Insulation", CIGRE, Paper 11-105, 2002.
140. P. Marek, F. Senn, W. Grubelnik, and W. Ladstatter, "Impact of new Motor and Generator insulation Systems", Energize, 2007, 51-55.
141. F. T. Emery, M.Williams, "Preliminary Evaluation of Flat Glass Backed Mica Paper Tape for HV Coil Groundwall using Vacuum Pressure Impregnation", in Proceedings of the IEEE Electrical Insulation Conference, Annapolis, June 2011, pp 175-179.
142. F. T. Emery, "Preliminary Evaluation of CR Kapton'-Backed Mica Paper Tape for High Voltage, Coil Groundwall Insulation using Vacuum Pressure Impregnation". IEEE Electrical Insulation Magazine, 14(5), 1998, pp. 12-15.
143. C. Calabrese et al., "A Review on the Importance of Nanocomposite Processing to Enhance Electrical Insulation", IEEE Trans DEI, 18, 2011, pp. 938-945.
144. P. Gropper et al., "Nanotechnology in high voltage insulation systems for large electrical machinery - first results", CIGRE Paper A1-103, 2012.
145. H. Hatano et al., "Comprehensive Risk Evaluation for Chemical Materials Applied to a Turbine Generator and the Comprehensive Risk Comparison Between Different Generators", in Proceedings of the CIGRE A1 Colloqium, Beijing, September 2011, pp. 18-23.
146. C. E. Thurman, "Trickle Impregnation of Small Motors", IEEE Electrical Insulation Magazine, 18, May 1989, 30-35.
147. M. Rabinowitz, "Superconducting Power Generation", IEEE Power Eng. Rev., 20(5), 2000, 8-11.
148. D. Driscoll, V. Dombrovski, and B. Zhang, "Development Status of Superconducting Motors", IEEE Power Eng. Rev., 20(5), 2000, 12-15.
149. R. Schiferl et al., "High Temperature Superconducting Synchronous Motors: Economic Issues for Industrial Applications", Proceedings IEEE PCIC, September 2006, pp. 259-268.
150. W. H. Hyat and J. A. Buck, "Engineering Electromagnetics", McGraw Hill, 2011.
151. American Iron and Steel Institute, Electrical Steel Sheet, Nomenclature Handbook No. 13, Washington, DC, 1979.
152. Armco Steel Company, Selection of Electrical Steels for Magnetic Cores, Butler, PA, 1985.
153. ASTM A976, "Standard Classifications of Insulation Coatings by Composition, Relative Insulating Ability and Application", 2008.
154. AK Steel Production Data Bulletin, Nonorientated Electrical Steels, M-15 through M-47, No. 7180-0139, July, 2007.
155. E. A. Boulter, et al., "Solventless Cured Epoxy Coating for Generator Stator Laminations", in Proceedings of IEEE International Symposium on Electrical Insulation, June 1980.
156. D. R. Bertenshaw and J. F. Lau, J. F. Conley, "Evaluation of EL CID Indications Associated with Stator Core Interlaminar Faults", in Proceedings of the IEEE Electrical Insulation Conference, Annaoplis, June 2011, pp 254-260.
157. G. Klempner and I.Kerszenbaum, "Handbook of Large Turbo-Generator Operation and Maintenance", 2nd ed., Wiley-IEEE Press, 2008.
158. J. Duncan Glover and M. Sarnia, Power System Analysis and Design, PWS Publishing, Boston, 1994.
159. G. C. Stone and I. Culbert, "Prediction of StatorWinding Remaining Life From Diagnostic Measurements" Proceedings of 2010 IEEE International Symposium on Electrical Insulation, San Diego, June 2010.
160. E. P. Comell et al., "Improved Motors for Utility Applications". Volumes I and 2, EPRI Report EL 2678, Octember 1982.
161. P. F. Albrecht et al., "Assessment of the Reliability of Motors in Utility Applications- Updated", IEEE Trans. EC, 1, 1986, 39-46.
162. O. V. Thorsen and M. Dalva. "Failure Identification and Analysis for HV Induction Motors in the Petrochemical Industry", IEEE Trans. IA, 35, 1999, 810-818.
163. H. O. Seinsch, "Monitoring and Diagnose Elektischer Maschinen und Antriebe" in Proceedings VDE Workshop, Allianz Schadensstatisik an HS Motoren, 1996-1999, 2001.
164. D. L. Evans et al., "IEEEWorking Group Report on Problems with Hydro Generator Thermoset Stator Windings", IEEE Trans. PAS, 1979, 536-542.
165. J. L. G. Araco et al, "Survey of Hydro generator Failures", Electra, 2009, 31-37.
166. J. Kapler and E. Goodeve, "Optimum Timing For Generator Stator Rewinds Based On Generator Condition Assessment And Statistical Methods", CEATI Report T052700-0321A, 2007.
167. G. C. Stone et al, "Motor and Generator Windings - Recent Problems Experienced", IEEE Industry Applications Magazine, November/December 2011, 29-36.
168. C. V. Maughan, "Root-Cause Diagnostics of Generator Service Failures", Proceedings IEEE Electric Machines and Drives Conference, May 2005, 1927-1935.
169. J. Kapler et al., "Software for Cost Assessment of Maintenance Alternatives on Generators with Stator Winding Water Leaks", paper presented at EPRI Conference on Maintaining the Integrity of Water Cooled Generators, Tampa, November 1996.
170. J. Kapler and J. Stein, "Probability of Failure Assessment on Generators with Extended Periods Between Maintenance Outages", paper presented at EPRI Conference on Utility Generator Predictive Maintenance, Phoenix, December 1998.
171. J. Kapler, G. C. Stone, "Expreience with Turbo Generator the Life Cycle Management Process", CIGRE Rotating Machine Workshop, Beijing, September 2011.
172. R. Wheeler et al., "Guide for Stator Winding Coil Insulation Repair", EPRI Report No. 1014909, March 2008.
173. R. Wheeler et al., "Repairing Mechanical Damage in Hydros", Proceedings of the 2008 HydroVision Conference.
174. R. G. Rhudy et al., EPRI EL-4059, Temporary Operation of Motors with Cut-Out Coils, June 1985.
175. R. G. Rhudy et al., EPRI EL-4983, Synchronous Machine Operation with Cutout Coils, January 1987.
176. Electrical Apparatus Service Association, Technical Manual, 1996.
177. IEEE 1665:2009, "Guide for the Rewind of Synchronous Generators, 50 and 60Hz, Rated 1 MVA and Above", 2009.
178. S. Cherukupalli, G. Holdorsom, and J. Lasko, "Rejuvenation of a 45 Year Old Generator Winding by Resin Injection", paper presented at EPRI, IEEE and CIGRE Rotating Electric Machinery Colloquium, Florence, Italy, September 8-10, 1999.
179. W. Schier et al., "Impregnable Configuration of a Carrier Body andWinding Elements", International Patent Application No. PCT/EP92/01874, 1992.
180. R. J. Jackson and A. Wilson, "Slot Discharge Activity in Air-Cooled Motors and Generators", Proceedings of the IEE, 129, Part B, 1982, pp. 159-167.
181. G. C Stone et al, "Impact of Slot Discharges and Vibration Sparking on Stator Winding Life in Large Generators", IEEE Electrical Insulation Magazine, September 2008, 14-21.
182. M. Liese and M. Brown, "Design-Dependent Slot Discharge and Vibration Sparking on High Voltage Windings", IEEE Trans DEI, 15, 2008, 927-932.
183. J. F. Lyles, "Procedure and Experience with Thermoset Stator Rewinds of Hydraulic Generators", in Proceedings of the IEEE Electrical Insulation Conference, Chicago, October 1985, pp. 244-254.
184. R. Hanna, D.W. Schmitt, "Failure Analysis of Induction Motors", IEEE Industry Applications Magazine, July 2012, 40-46.
185. R. Curiac, et al., "Improvements in Energy Efficiency of Induction Motors by the Use of Magnetic Wedges", Proceedings of the IEEE Petrochemical Indusry Conference, September 2011.
186. G. C. Stone, M. Stranges, and D. Bogh, "Voltage Endurance Testing - Stator Insulation Systems for Inverter-Fed Machines". IEEE Industry Applications Magazine, November/December 2009, 12-18.
187. P. Lonseth and V. R. Mulhall, "High Intensity Slot Spark Discharge - Its Causes and Cure", Proceedings of the IEEE International Symposium on Electrical Insulation, Montreal, June 1976, Paper C4.
188. W. Moore, "Generator Bar Deterioration Due to Vibration Sparking and Partial Discharges", CIGRE SC A Colloquium on Rotating Machines, Beijing, September 2011.
189. G. C. Stone, R. G. VanHeeswijk, and R. Bartnikas, "Investigation of the Effect of Repetitive Voltage Surges on Epoxy Insulation", IEEE Trans. EC, 7, 1992, 754-759.
190. B. K. Gupta et al., "Turn Insulation Capability of Large AC Motors: Part I-Surge Monitoring, Part 2-Impulse Strength: Part 3-Insulation Coordination", IEEE Trans. EC, 2, 1987, 658-679.
191. E. P. Dick et al., "Review of Generator Surge Coordination Including Generator Breakers", IEEE T. Power Delivery, 3, 1988, 599-606.
192. E. Persson, "Transient Effects in Applications of PWM Inverters to Induction Motors", IEEE T. Ind. Appl., 28, 1992, 1095-1101.
193. S. R. Campbell and G. C. Stone, "Examples of Stator Winding Partial Discharge Due To Inverter Drives", in IEEE International Symposium on Electrical Insulation, Anaheim, April 2000, 231-234.
194. A. L. Lynn, W. A. Gottung, and D. R. Johnston, "Corona Resistant Turn Insulation in AC Rotating Machines", in Proceedings of IEEE Electrical Insulation Conference, Chicago, October 1985, 308-311.
195. W. Yin et al., "Improved Magnet Wire for Inverter-Fed Motors", in Proceedings of IEEE Electrical Insulation Conference, Chicago, September 1997, 379-382.
196. National Electrical Manufacturers Association Standard MW1000. "Magnet Wire Standard", 2014.
197. J. Dymond, K. Younsi, and N. Stranges, "StatorWinding Failures: Contamination, Surface Discharge and Tracking", in Proceedings of IEEE Petroleum and Chemical Industry Conference, September 1999, 337-344.
198. L. Lamarre, C. Guddemi, J. -P. Banville, and S. Lamothe, "Cleaning of StatorWindings with Solvents", IEEE Electrical Insulation Magazine, May 2005, 40-45.
199. E. M. Fort and J. C. Botts, "Development of a Thermalastic Epoxy for Large HV Generators" in Proceedings of IEEE International Symposium on Electrical Insulation, June 1982, 56-59.
200. H. Ponce, B. Gott, and G. C. Stone, "Generator Stator Endwinding Vibration Guide", EPRI Report 1021774, August 2011.
201. M. Sasic et al., "Requirements for Fiber Optic Sensors for Stator Endwinding Vibration Monitoring", IEEE Condition Monitoring and Diagnostics Conference, Bali, 2012, 118-121.
202. J. M. Butler and H. J. Lehmann, "Performance of New Stator Winding Support System for Large Generators", in Proceedings of American Power Conference, 1984, pp. 461-466.
203. M. P. Manning and R. T. Lambke, "Analysis of StatorWinding Clip-to-Strand Leaks", paper presented at EPRI Conference on Maintaining the Integrity of Water-Cooled Stator Windings, Atlanta, June 1995.
204. "Conversion to Deaerated Stator CoolingWater in Generators Previously Cooled with AeratedWater:Interim Guidelines", EPRI. Palo Alto, CA, Report No. 1000069, 2000.
205. A. K. Aggarwal, J. A. Beavers, and B.C. Styrett. "Mechanism for Corrosion of Brazed Joints in Stator Bar Clips of Water Cooled Generators", paper presented at EPRI Conference on Maintaining the Integrity of Water-Cooled Generator Stator Windings, Tampa, November 1996.
206. T. Sallade, R. Boberg, and B. Schaefer. "Development Statues of an Anaerobic Sealant Process for Global Repair of Leaking Stator Clips", paper presented at EPRI Conference on Maintaining the Integrity of Water-Cooled Generator Stator Windings, Tampa, November 1996.
207. J. Kapler, "Generator Stator Winding Leak Decision Advisor", paper presented at EPRI Conference on Maintaining the Integrity of Water-Cooled Generator Stator Windings, Tampa, November 1996.
208. G. C. Stone et al, "Motor and Generator Windings", IEEE Industry Application Magazine, November 2011, 29-36.
209. R. Ilie and G. C. Stone, "Turbine Generator Rotor and StatorWinding Hipot Testing", IEEE Electrical Insulation Magazine, March 2012, 29-37.
210. G. Klempner and I. Kerszenbaum, "Handbook of Turbo-Generator Operation and Maintenance", 2nd ed., IEEE Wyle Press, 2008.
211. I. Culbert, D. Dunn, M. Sasic and G. Stone, "Motor and GeneratorWindings", IEEE Industry Applications Magazine, November 2011, 29-36.
212. R. Ilie and G. C. Stone, "Turbine Generator Rotor and StatorWinding Hipot Testing", IEEE Electrical Insulation Magazine, March 2012, 29-37.
213. K. Alewine and W. Chen, "A Review of Electrical Winding Failures in Wind Turbine Generators," Proceedings of 2011 IEEE Electrical Insulation Conference, Annapolis, Maryland, USA, June 5-8, 2011.
214. G. Gao and W. Chen, "Design Changes of Wind Turbine Generators," Proceedings 2009 IEEE Electrical Insulation Conference, Montreal, Quebec, Canada, May 31-June 3, 2009.
215. H. Bonnet and G. C. Soukup, "Cause and Analysis of Stator and Rotor Failures in Three-Phase Squirrel Cage Induction Motors", IEEE Trans. IA, 28(4), 1992, 921-937.
216. J. Dymond and R. Findlay, "Some Commentary on the Choice of Rotor Bar Material for Induction Motors", IEEE Trans EC, 1995, 425-430.
217. G. C. Stone et al., "Motor and GeneratorWindings", IEEE Industry Applications Magazine, November 2011, 29-36.
218. I. M. Culbert andW. Rhodes, "Using Current Signature Analysis Technology to Reliably DetectWinding Defects in Squirrel-Cage Induction Motors", IEEE Tans. IA, 43(2), 2007, 422-428.
219. I. M. Culbert, D. Dunn, M. Sasic and G. Stone, "Motor and GeneratorWindings", IEEE Industry Applications Magazine, November 2011, 29-36.
220. ASTM A 976, "Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application", 2005.
221. G. Klempner "Ontario Hydro Experience with Failures in Large Generators due to Loose Stator Core Iron", paper presented at EPRI Utility Generator Predictive Maintenance and Refurbishment Conference, Phoenix, Arizona, December 1-3, 1998.
222. P. J. Tavener and A. F. Anderson, "Generator Core Failures", IEE Proc., Electr. Power Appl., 152(6), 2005, 1427-1439.
223. K. N. Lehoczky, "Relationship Between Stator Core Buckling, Core Losses, Vibration and Local Over-Temperatures", Proc. IEEE T. Energy Conver., 3(1), 1988, 56-63.
224. G. C. Stone, C. V. Maughan, D. Nelson and R. P. Schultz, "Impact of Slot Discharges and Vibration Sparking on Stator Winding Life in Large Generators", Electrical Insulation Magazine, IEEE, 24(5), September-October 2008, 14-21.
225. S. G. Bomben, "Experience Repairing a Serious Stator Core Fault in an 80KVA Vertical Water Wheel Generator", Proceedings IEEE Electrical Insulation conference and Manufacturing Expo 2005, Indianapolis, IN, USA, pp 67-70.
226. G. C. Stone and I. Culbert, "Prediction of Stator Winding Remaining Life From Diagnostic Measurements", Proceedings of IEEE International Symposium on Electrical Insulation, San Diego, June 2010.
227. I. Kerszenbaum, Inspection of Large Synchronous Machines, IEEE Press, 1997.
228. G. Klempner and I. Kerszenbaum, Handbook of Large Turbo-Generator Operation and Maintenance, 2nd ed., Wiley-IEEE Press, 2008.
229. C. Maughan, Maintenance of Turbine-Driven Generators, Available at http://www.generatortechnicalforum.org/portal/forum/viewforum.php?fgroup=1&forum_id=65. Accessed April 18, 2010.
230. B. A. Lloyd, G. C. Stone and J. Stein, "Development of an Expert Monitoring SystemtoAssess Machine Insulation Condition", in Proceedings of IEEE Electrical Insulation Conference, October 1991, 33-37.
231. N. Amyot, C. Hudon, M. Lévesque, M. Bélec, F. Brabant and C. St-Louis, "Development of a Generator Prognostic Tool", Proceedings of IEEE Electrical Insulation Conference, Ottawa, June 2013, 473-476.
232. A. J. Gonzales, R. L. Osborne, and C. T. Kemper, "On-Line Diagnosis of Turbine Generators Using Intelligence", IEEE Trans. EC, 1, 1986, 68-74.
233. G. Stone et al., "Continuous Integrated On-Line Monitoring for Hydrogenerators", Proceedings of ENAM IV-Cigre Brazil Conference, Curitiba, Brazil, September 2010.
234. G. S. Klempner, A. Kornfeld, and B. Lloyd, "The Generator Expert Monitoring System", paper presented at EPRI Conference on Utility Motor and Generator Predictive Maintenance, December 1991.
235. IEEE 43-2014, "IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery".
236. B. K. Gupta, G. C. Stone, and J. Stein, "StatorWinding Hipot (High Potential) Testing", Proceedings of IEEE Electrical Insulation Conference, Montreal, QC, May/June 2009, 409-413.
237. IEEE 95, "IEEE Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Direct Voltage".
238. G. C. Stone et al., "The Ability of Diagnostic Tests to Estimate the Remaining Life of Stator Insulation", Proc. IEEE Trans. Energy Conv., 3, 1988, 833-841.
239. B. K. Gupta et al., "Do Hipot Tests Damage Rotating Machine Insulation?", Proceedings of IEEE International Symposium on Electrical Insulation, San Diego, June 2010.
240. F. R. Schleif and L. R. Engvall, "Experience in Analysis of DC Insulation Tests for Maintenance Programming", Power Appar. Syst., 78, 1959, 156-161.
241. W. McDermid and B. G. Solomon, "Significance of Defects Found During High Direct Voltage Ramp Tests", Proceedings of IEEE Electrical Insulation Conference, Cincinnati, October 1999, 631-636.
242. L. M. Rux, "High-Voltage DC Tests for Evaluating Stator Winding Insulation: Uniform Step Graded Step, and Ramped Test Methods", Proceedings of 1997 Conference on Electrical Insulation and Dielectric Phenomena, Minneapolis, October 1997, 258-262.
243. C. Pinto, "An Improved Method of Detecting Contamination of HV Stator Windings in the Field", Proceedings of IEEE Electrical Insulation Conference, Boston, October 1991, pp. 55-59.
244. S. Bhumiwat, "Field Experience in Insulation Diagnosis of Industrial HV Motors Using Dielectric Response Technique", Proceedings of IEEE Electrical Insulation Conference, Montreal, May 2009, pp. 454-459.
245. G. R. Soltani and E. David, "Condition Assessment of Rotating Machine Winding Insulation by Analysis of Charging and Discharging Currents", Proceedings of IEEE ISEI, Toronto, October 2006, 336-339.
246. C. M. Foust and B. V. Bhimani, "Predicting Insulation Failures with Direct Voltage", AIEE Trans. PAS, 76, 1957, 1120-1130.
247. K. M. Stevens and J. S. Johnson, "Destructive AC and DC Tests on Two Large Turbine Generators of the Southern California Edison Co.", AIEE PAS, 73, 1954, 1115-1122.
248. B. K. Gupta, G. C. Stone, and J. Stein, "Use of AC and DC Hipot Tests to Assess Condition of Stator Winding Insulation", Proceedings of IEEE Electrical Insulation Conference, Chicago, September 1995, 605-608.
249. IEEE 56-1977, "IEEE Guide for Insulation Maintenance of Large Alternating Current Rotating Machinery".
250. R. Ilie and G. C. Stone, "Turbine Generator Rotor and StatorWinding Hipot Testing", IEEE Electrical Insulation Magazine, March 2012, 29-37.
251. R. Miller and I. A. Black, "PD Energy Measurements on Electrical Machines When Energized at Frequencies Between 0.1 Hz and Power Frequency", IEEE Trans. Electr. Insul., El-14, 1979, 127-135.
252. IEEE 433, "IEEE Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Voltage at Very Low Frequency".
253. B. Milano and R. Arbour, "Diagnosing High-Potential Test Failures in LargeWater-Cooled Hydrogenerators", Proceedings of IEEE Electrical/Electronics Insulation Conference, Chicago, IL, September 1989, pp. 228-235.
254. A. Jakubik and M. Sasic, "A New Instrument for Wet Stator Insulation Detection", EPRI Turbine Generator User Group Meeting, New Orleans, January 2011.
255. A. D. W. Woolmerans and H. J. Geldenhuys, "Routine Diagnostic Measurements on High Voltage Machines", Proceedings of IEEE International Conference on Properties and Applications of Dielectric Materials, Tokyo, July 1991, 777-781.
256. R. Bartnikas, Engineering Dielectrics, Vol. IIB Electrical Properties of Solid Insulating Materials:Measurement Techniques, ASTM Publication STP 926, ASTM, 1987.
257. IEEE Standard 286-2000, "Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation".
258. IEC Standard 60034-27-3, "Dielectric Dissipation Factor Measurement on Stator Winding Insulation of Rotating Electrical Machines". April 2014 Draft.
259. R. Omranipour and S. U. Haq, "Effect of Stress Grading Systems and Guarding Techniques on Measured Power Factor and Power Factor Tip-Up of Electric Machinery Stator Windings", Proceedings IEEE Electrical Insulation Conference, Montreal, June 2009, 414-418.
260. F. T. Emery, "Reduction Techniques of PD, Dissipation Factor and External Corona for High Voltage Stator Windings", Proceedings IEEE Electrical Insulation Conference, Montreal, June 2009, 315-319.
261. KEMA Specification S13/14, "Specification for Hydrogen, Liquid and Air-Cooled Synchronous AC Generators with Rated Voltage 5 kV and Above", April 2009.
262. S. A. Boggs and G. C. Stone, "Fundamental Limitations in the Measurement of Corona and Partial Discharge", IEEE Trans. Electr. Insul., El-17, 1982, 143-150.
263. R. Bartnikas and E. J. McMahon, Engineering Dielectrics, Vol. I. Corona Measurement and Interpretation, ASTM Publication STP 669, ASTM, 1979.
264. IEEE 1434-2000, "IEEE Guide to the Measurement of Partial Discharges in Rotating Machinery".
265. IEC TS 60034-27-1: 2006 (Originally published as IEC 60034-27), "Off-Line Partial Discharge Measurements on the Stator Winding Insulation of Rotating Electrical Machines".
266. B. Fruth and J. Fuhr, "PD Pattern Recognition as a Tool for Diagnosis and Monitoring of Aging", CIGRE Paper 15/33-12, September 1990.
267. ASTM D1868, "Standard Methods for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems".
268. IEC 60270, "High Voltage Test Techniques. Partial Discharge Measurements".
269. G. C. Stone et al., "Investigation of Turn Insulation Failure Mechanisms in Large AC Motors", IEEE Trans. Power Appar. Syst., 103, 1984, 2588-2596.
270. G. C. Stone, "Calibration of PD Measurements for Motor and Generator Windings-Why It Can't Be Done", IEEE Electrical Insulation Magazine, January 1998, 9-12.
271. Hudon, C. and Belec, M., "Partial Discharge Signal Interpretation for Generator Diagnostics", IEEE Trans. Dielectr. Electr. Insul., 12(2), 2005, 297-319.
272. IEC TS 61934, "Electrical Insulating Materials and Systems - Electrical Measurement of Partial Discharges (PD) Under Short Rise Time and Repetitive Voltage Impulses".
273. G. C. Stone and I. Culbert, "Partial Discharge Testing of Random Wound Stators During Short Risetime Voltage Surges", Proceedings IEEE Electrical Insulation Conference, Montreal, June 2009, 188-191.
274. S. R. Campbell, M. Susnik, and G. C. Stone, "New Tools to Determine the Vulnerability of Stator Windings to Voltage Surges from IFDs", Proceedings IEEE Electrical Insulation Conference, Cincinnati, September 1999.
275. Cavallini, G. C. Montanari and A. Salsi, "Characterization of Patch Antennae for PD Detection in Power Cables", Proceedings IEEE Conference on Electrical Insulation and Dielectric Phenomena, October 2007, pp. 179-182.
276. Y. Shibuya et al., "Electromagnetic Waves form Partial Discharges and Their Detection Using Patch Antennae", Trans. IEEE DEI, 2010, 862-871.
277. IEEE 1799:2012, "Recommended Practice for Quality Control Testing of External Discharges on Form-Wound Coils, Roebel Bars, Vacuum-Pressure Impregnated Stator Insulation and Fully Assembled Stator Windings".
278. C. Hudon et al., "Quality Control Test of External Discharges on Stator Bars", CIGRE SC A1 & D1 Joint Colloquium, October 2007.
279. L. E. Smith, "A Peak Pulse Ammeter-Voltmeter Suitable for Ionization (Corona) Measurements in Electrical Equipment", paper presented at Doble Client Conference, Paper 37AIC, April 1970.
280. IEEE 522, "Guide for Testing Turn-to-Turn Insulation on Form Wound Stator Coils for Alternating Current Rotating Electrical Machines".
281. IEC 60034-15, "Impulse Voltage Withstand Levels of Form-Wound Stator Coils for Rotating AC Machines".
282. R. L. Nailen, "Are Those New Motor Maintenance Tests Really That Great?", Electrical Apparatus Magazine, January 2000, 31-35.
283. J. F. Lyles, T. E. Goodeve, and H. Sedding, "Parameters Required to Maximize a Thermoset Hydro-electric Stator Winding Life-Parts 1 and 2", IEEE Trans. EC, 9, 1994, 628-635.
284. M. Sasic, H. Jiang, and G. C. Stone, "Requirements for Fiber Optic Sensors for Stator Endwinding Vibration Monitoring", Proceedings of IEEE Condition Monitoring and Diagnostics Conference, Bali, Indonesia, September 2012, 118-121.
285. W. Moore, "Bump Test: Advantages and Limitations", EPRI Turbine Generator Conference, Surfers Paradise, Australia, April 2012.
286. A. M. Iversen, "GE TIL 1098 Update", paper presented at Electric Power Research Institute Conference on Maintaining Integrity of Water Cooled Generator Stator Windings, Tampa EL, November 1996.
287. R. L. Nailen, "Is Finding Broken Rotor Bars Easy?", Electrical Apparatus Magazine, April 1998, 26-30.
288. E. H. Povey, "Power Factor Tests on Water Cooled Generators", 40th Doble Client Conference, Boston, 1973.
289. P. J. Tavner, L. Ran, J. Penman, and H. Sedding, Condition Monitoring of Rotating Electrical Machines, 2nd ed., IET, 2008.
290. J. Gonzalez, Monitoring and Diagnosis of Turbine-Driven Generators, Prentice Hall, Englewood Cliffs, NJ, 1995.
291. M. E. H. Benbouzid, "Bibliography on Induction Motor Faults Detection and Diagnosis", IEEE Trans. Energy Conv., 14, 1999, 1065-1074.
292. R. M. Tallam et al., "A Survey of Methods for Detection of Stator-Related Faults in Induction Machines", IEEE Trans. Ind. Appl., 43, 2007, 920-932.
293. J. Dymond, R. Ong, and N. Stranges, "Instrumentation, Testing and Analysis of Electrical Machine Steady State Heating", Proceedings of IEEE Petroleum and Chemical Industry Conference, Toronto, September 2001.
294. T. Watson and D.Wong, "Two Cases on Technology to Monitor Rotor Pole Face Surface, CoilWinding, and Connector Temperature", Water Power XV, Chattanooga, July 2007.
295. M. Bissonette, "Ten Case Studies of On-Line Monitoring of Hydroelectric Machinery", paper presented at Doblc Client Conference, April 1999.
296. J.M. Braun and G. Brown, "Operational Performance of Generator Condition Monitors", IEEE Trans. Energy Conv., 5, 1990, 344-349.
297. S. C. Barton et al., "Implementation of Pyrolysate Analysis of Materials Employing Tagging Compounds to Locate an Overheated Area in a Generator", IEEE Trans. Energy Conv., PAS-100, 1982, 4983-4989.
298. D. M. Carthdge et al., "Machine Condition Monitoring Ozone Monitor for Air Cooled Generators", CEA Report 9134 G 864, February, 1994.
299. L. Rux, "Hydroelectric Generator Stator Winding Condition Assessment and Ozone Abatement Recommendations", paper presented at CIGRE/EPRI Colloquium on Maintenance and Refurbishment of Utility TurboGenerators, Hydrogenerators and Large Motors, Florence, Italy, April 1997.
300. G. C. Stone, "Importance of Bandwidth in PD Measurements in Operating Motors and Generators", IEEE Trans. Dielect. Electr. Insul., 7, 2000, 6-11.
301. IEEE 1434, "IEEE Guide to the Measurement of Partial Discharges in Rotating Machinery".
302. IEC TS 60034-27-2 "On-Line Partial Discharge Measurements on the Stator Winding Insulation of Rotating Electrical Machines".
303. J. Johnson and M. Warren, "Detection of Slot Discharges in High Voltage Stator Windings During Operation", Trans. AIEE, 70, 1951, 1998-2000.
304. J. E. Timperly and E. K. Chambers, "Locating Defects in Large Rotating Machines and Associated Systems through EMI Diagnosis", CIGRE Paper 11-311, September 1992.
305. S. R. Campbell et al., "Practical On-Line Partial Discharge Test for Turbine Generators and Motors", IEEE Trans. Energy Conv., 14, 1994, 281-287.
306. H. Muto et al., "On-Line PD Monitoring System for Rotating machines using Narrow Band Detection ofEMWave in GHz Range", IEEE International Conference on Condition Monitoring and Diagnosis, Beijing, China, April 2008, pp. 1093-1096.
307. G. C. Stone and S. R. Campbell, "Investigations into the Use of Temperature Detectors as Stator Winding Partial Discharge Detectors", Conference Record of the 2006 IEEE International Symposium on Electrical Insulation, pp. 369-375.
308. C. Kane, "Our Response - Use of Resistive Temperature Detectors as PD Sensors in Rotating Equipment", Proceedings of IEEE Electrical Insulation Conference, June 2007, pp. 183-188.
309. J. F. Lyles and T. E. Goodeve, "Using Diagnostic Technology for Identifying Generator Winding Maintenance Needs", Hydro Rev., 58, 1993, 67.
310. G. C. Stone and V. Warren, "Objective Methods to Interpret Partial-Discharge Data on Rotating-Machine Stator Windings", IEEE Trans. Ind. Appl., 42(1), 2006, 195-200.
311. M. Fenger and G. C. Stone, "Investigations into the Effect of Humidity on Stator Winding Partial Discharges" IEEE Trans. Dielect. Electr. Insul., 12(2), 2005, 341-346.
312. B. A. Lloyd, S. R. Campbell, and G. C. Stone, "Continuous On-Line PD Monitoring of Generator Stator Windings", IEEE Trans. Energy Conv., 14, 1999, 1131-1137.
313. G. C. Stone, et al., "Experience with Continuous On-Line Partial Discharge Monitoring of Hydrogenerator Stator Winding Insulation", CIGRE, Paris, France, Paper A1-203, 2006.
314. G. C. Stone, "Calibration of PD Measurements for Motor and Generator Windings--Why It Can't Be Done", IEEE Electrical Insulation Magazine, January 1998, 9-12.
315. V. Warren, "How Much PD is Too Much PD", Proceedings of the Iris Rotating Machine Conference, Las Vegas, June 2012.
316. M. Kurtz et al., "Application of PD Testing to Hydrogenerator Maintenance", IEEE Trans. Power Apparatus Syst., 103, 1984, 2148-2157.
317. G. C. Stone and S. R. Campbell, "Relevance of Phase Resolved PD Analysis to Insulation Diagnosis in Industrial Equipment", 2010 IEEE International Conference on Solid Dielectrics, Postdam, Germany, July 2010.
318. G. C. Stone, "A Perspective on Online Partial Discharge Monitoring for Assessment of the Condition of Rotating Machine Stator Winding Insulation", IEEE Electrical Insulation Magazine, September 2012, 8-12.
319. S. B. Lee et al., "An On-line Groundwall and Phase to Phase Insulation Quality Assessment Technique for AC Machine Stator Windings", IEEE Trans. Industrial Appl., 42, 2006, 946-957.
320. P. Neti et al., "On-Line Detection of Endwinding Contamination in Industrial Motors", Proceedings of the 2011 IEEE Electrical Insulation Conference, Annapolis, MD, June 2011, pp. 265-270.
321. D. McKinnon, "Using a Six Fault Zone Approach for Predictive Maintenance on Motors", Proceedings of the IEEE Electrical Insulation Conference, October 2007, 253-264.
322. M. Twerdoclib et al., "Two Recent Developments in Monitors for Large Turbine Generators", IEEE Trans. Energy Conv., 3, 1988, 653-659.
323. G. Pritchard and M. Couchard, "Fiber Optic Accelerometer for Use in Hostile Electrical Environments", Hydro Power and Dams, 1998.
324. M. Sasic, H. Jiang, and G. C. Stone, "Requirements for Fiber Optic Sensors for Stator Endwinding Vibration Monitoring", IEEE Conference on Condition Monitoring and Diagnostics, Bali, September 2012.
325. D. R. Albright, "Interturn Short-Circuit Detector for Turbine-Generator RotorWindings", IEEE Trans. Power Apparatus Syst., PAS-90, 1971, 2.
326. M. Sasic, B. Lloyd, and A. Elez, "Finite Element Analysis of Turbine Generator Rotor Winding Shorted Turns", IEEE Trans. Energy Conv., 27, 2012, 930-937.
327. D. R. Albright, D. J. Albright, and J. D. Albright, "Flux Probes Provide On-Line Detection of Generator Shorted Turns", Power Eng., 28-32, 1999.
328. M. Sasic et al., "Detecting Turn Shorts in Rotating Machine Windings: A New Test Using Magnetic Flux Monitoring", IEEE Industry Applications Magazine, March 2013, 63-69.
329. S. R. Campbell et al., "Detection of Rotor Winding Shorted Turns in Turbine Generators and Hydrogenerators", 2010 CIGRE, Paris, France, Paper A1-206.
330. G. B. Kliman et al., "Noninvasive Detection of Broken Rotor Bars in Operating Induction Motors", IEEE Trans. Energy Conv., 3, 873-879, 1988.
331. W. T. Thomson, "Diagnosing Faults in Induction Motors-Engineering Ideas", Electr. Rev., 1984, 21-22.
332. W. T. Thomson and M. Fenger, "Current Signature Analysis to Detect Induction Motor Faults", IEEE Industry Applications Magazine, 26-34, July 2001.
333. I. Culbert and W. Rhodes, "Using Current Signature Analysis Technology to Reliably Detect Cage Winding Defects in Squirrel Cage Induction Motors", IEEE Trans. Ind. Appl., 43, 2007, 422-442.
334. S. Tilley, "Rotor Bar Problem in Electric Motor", Vibrations, 26(4), 2009, 10-11.
335. GE Energy Product Leaflet, "Stator Leak Monitor System - High Performance", January 2010.
336. EASA Technical Note No. 17 "Stator Core Testing", originally published in October 1992.
337. IEEE Standard 432-1992. "Guide for Insulation Maintenance for Rotating Electric Machinery (5 HP to less than 10,000 HP)".
338. IEEE 56-1977, "Guide for Insulation Maintenance of Electric Machines".
339. M. G. Say, Performance and Design of Alternating Current Machines, 4th ed., Pitman Publishing, 1976.
340. G. Klempner, "Experience and Benefit of Using El-CID for Turbine Generators", paper presented at EPRI Motor and Generator Predictive Maintenance and Refurbishment Conference, Orlando, Florida, November 28-30, 1995.
341. S. J. Sutton, "Theory of Electromagnetic Testing of Laminated Stator Cores", Insight, 36 1994.
342. J. W. Shelton and D. Paley, "Robotic Delivery Systems for Generator Air Gap Tests", paper presented at EPRI Motor and Generator Predictive Maintenance and Refurbishment Conference, Orlando, Florida, November 28-30, 1995.
343. Iris Power LP Electromagnetic Core Imperfection Detector User Manual V5.4, 2011.
344. D. Bertenshaw, "Analysis of El-CID - High Flux Test Field Correlation", EPRI Turbine Generator Workshop, Barcelona, Spain, 12-13 April, 2011.
345. G. Klempner and I. Kerszenbaun, Handbook of Large Turbo-Generator Operation and Maintenance, 2nd ed., Wiley IEEE Press.
346. IEEE 1665-2009, "Guide for the Rewind of Synchronous Generators, 50Hz and 60Hz, Rated 1MVA and Above".
347. EPRI Report 1000897, "Repair and Reconditioning Specification for AC Squirrel-Cage Motors with Voltage Ratings of 2.3 kV to 13.2 kV", December 2000.
348. W. G. Moore, B. M. Jagrine, and S. M. Fox, "Factory High Speed Rotating Tests Assure Quality Generator Rotor Rewind", Iris Power Rotating Machine Conference, New Orleans, LA, USA, June 2000.
349. G. C. Stone, B. K. Gupta, J. F. Lyles, and H. G. Sedding. "Experience with Accelerated Aging Tests on Stator Bars and Coils", paper presented at IEEE International Symposium on Electrical Insulation, Toronto, June 1990, pp. 356-360.
350. IEEE 1553-2002, "Standard for Voltage Endurance Testing of FormWound Coils and Bars for Hydrogenerators".
351. G. C. Stone, J. F. Lyles, J. M. Braun, Ontario Hydro, Canada, and C. L. Kaul,Virginia Power, Richmond, VA, "A Thermal Cycling Type Test for Generator Stator Winding Insulation", IEEE Trans. Energy Conv., 6(4), 1991, 707-713.
352. I. Kremza, "Investigation into the Effectiveness of a Trial Use Guide for Testing of Turn Insulation in Multi Turn Coils", 2012 HydroVision Conference, Louisville, Kentucky, July 2012.
353. B. K. Gupta, G. C. Stone, and J. Stein, "Use ofMachine Hipot Testing in Electric Utilities", Proceedings of IEEE Electrical Insulation Conference, Cincinnati, October 2001, pp. 323-326.
354. R. Ilie and G. C. Stone, "Turbine Generator Rotor and Stator Winding Hipot Testing", IEEE DEIS Magazine, Vol. 28, No. 2, March/April 2012, 29-37.
355. G. C. Stone and I. Culbert, "PD Testing of RandomWound StatorWindings During Short RisetimeVoltage Surges", Proceedings of IEEE Electrical Insulation Conference, Montreal, June 2009, pp. 188-191.
356. G. C. Stone, "A Suggested Approach for Specifying PD Testing as a New Winding Acceptance Test", Proceedings IEEE Electrical Insulation Conference, October 2005, pp. 159-162.
357. J. W. Wood and R. T. Hindmarsh, "Rotor Winding Short Detection", IEE Proc., 133(3), pt. 13, 1986.
358. EPRI Report 1003095, "Electric Motor Tiered Maintenance Program", August 2002.