Six sigma: A literature review

International Journal of Lean Six Sigma

Volumn 1, Issue 3, 2010, Pages 216-233

  Tjahjono, B ^a   Ball, P ^a   Vitanov, V I ^a,b   Scorzafave, C ^a   Nogueira, J ^a   Calleja, J ^a   Minguet, M ^a   Narasimha, L ^a   Rivas, A ^a   Srivastava, A ^a   Srivastava, S ^a   Yadav, A ^a  

^a CRANFIELD UNIVERSITY   (United Kingdom)

^b DURHAM UNIVERSITY   (United Kingdom)

Author keywords

Production processes; Six Sigma

Indexed keywords

EID: 84905991972     PISSN: 20404166     EISSN: 20404174     Source Type: Journal    
DOI: 10.1108/20401461011075017     Document Type: Article

References (87)

1. Aghili, S. (2009), “A Six Sigma approach to internal audits”, Strategic Finance, Vol. 90 No. 8, pp. 38-43.
2. Al-Mishari, S.T. and Suliman, S. (2008), “Integrating Six-Sigma with other reliability improvement methods in equipment reliability and maintenance applications”, Journal of Quality in Maintenance Engineering, Vol. 14 No. 1, pp. 59-70.
3. Anand, R.B., Shukla, S.K., Ghorpade, A., Tiwari, M.K. and Shankar, R. (2007), “Six Sigma-based approach to optimise deep drawing operation variables”, International Journal of Production Research, Vol. 45 No. 10, pp. 2365-85.
4. Andersson, R., Eriksson, H. and Torstensson, H. (2006), “Similarities and differences between TQM, Six Sigma and lean”, TQM Magazine, Vol. 18 No. 3, pp. 282-96.
5. Antony, J. (2004), “Some pros and cons of Six Sigma: an academic perspective”, TQM Magazine, Vol. 16 No. 4, pp. 303-6.
6. Antony, J. (2007), “Is Six Sigma a management fad or fact?”, Assembly Automation, Vol. 27 No. 1, pp. 17-19.
7. Antony, J., Kumar, M. and Madu, C.N. (2005a), “Six Sigma in small and medium sized UK manufacturing enterprises”, International Journal of Quality & Reliability Management, Vol. 22 No. 8, pp. 860-74.
8. Antony, J., Kumar, M. and Tiwari, M.K. (2005b), “An application of Six Sigma methodology to reduce the engine-overheating problem in an automotive company”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 219 No. 8, pp. 633-46.
9. Arnheiter, E.D. and Maleyeff, J. (2005), “The integration of lean management and Six Sigma”, TQM Magazine, Vol. 17 No. 1, pp. 5-18.
10. Baines, T.S., Lightfoot, H.W., Benedettini, O. and Kay, J.M. (2009), “The servitization of manufacturing: a review of literature and reflection on future challenges”, Journal of Manufacturing Technology Management, Vol. 20 No. 5, pp. 547-67.
11. Banuelas, R. and Antony, J. (2004), “Six Sigma or design for Six Sigma”, TQM Magazine, Vol. 16 No. 4, pp. 250-63.
12. Black, K. and Revere, L. (2006), “Six Sigma arises from the ashes of TQM with a twist”, International Journal of Health Care Quality Assurance, Vol. 19 No. 3, pp. 259-66.
13. Brady, J.E. and Allen, T.T. (2006), “Six Sigma literature: a review and agenda for future research”, Quality & Reliability Engineering International, Vol. 22, pp. 335-67.
14. Breyfogle, F.W. III (2008), “Better fostering innovation: 9 steps that improve lean Six Sigma”, Business Performance Management Magazine, Vol. 6 No. 3, pp. 16-20.
15. Bunce, M.M., Wang, L. and Bidanda, B. (2008), “Leveraging Six Sigma with industrial engineering tools ins crateless retort production”, International Journal of Production Research, Vol. 46 No. 23, pp. 6701-19.
16. Chakrabarty, A. and Tan, K.C. (2007), “The current state of Six Sigma application in services”, Managing Service Quality, Vol. 17 No. 2, pp. 194-208.
17. Chung, Y.C., Hsu, Y.W. and Tsai, C.H. (2008), “An empirical study on the correlation between critical DFSS success factors, DFSS implementation activity levels and business competitive advantages in Taiwan’s high-tech manufacturers”, Total Quality Management, Vol. 19 No. 6, pp. 595-607.
18. Coleman, S. (2008), “Six Sigma: an opportunity for statistics and for statisticians”, Significance, Vol. 5 No. 2, pp. 94-6.
19. Dasgupta, T. (2003), “Using the Six-Sigma metric to measure and improve the performance of a supply chain”, Total Quality Management & Business Excellence, Vol. 14 No. 3, pp. 355-66.
20. Davison, L. and Shaghana, K. (2007), “The link between Six Sigma and quality culture: an empirical study”, Total Quality Management, Vol. 18 No. 3, pp. 249-65.
21. de Koning, H. and de Mast, J. (2006), “A rational reconstruction of Six-Sigma’s breakthrough cookbook”, International Journal of Quality & Reliability Management, Vol. 23 No. 7, pp. 766-87.
22. de Koning, H., de Mast, J., Does, R.J.M.M., Vermaat, T. and Simons, S. (2008), “Generic lean Six Sigma project definitions in financial services”, Quality Management Journal, Vol. 15 No. 4, pp. 32-45.
23. Edgeman, R.L. and Dugan, J.P. (2008), “Six Sigma from products to pollution to people”, Total Quality Management, Vol. 19 Nos 1-2, pp. 1-9.
24. Ehie, I. and Sheu, C. (2005), “Integrating Six Sigma and theory of constraints for continuous improvement: a case study”, Journal of Manufacturing Technology Management, Vol. 16 No. 5, pp. 542-53.
25. Ferrin, D., Miller, M. and Muthler, D. (2005), “Lean sigma and simulation, so what’s the correlation? V2”, Proceedings of the 2005 Winter Simulation Conference, Orlando, FL, 4-7 December, pp. 2011-15.
26. Furterer, S. and Elshennawy, A.K. (2005), “Implementation of TQM and lean Six Sigma tools in local government: a framework and a case study”, Total Quality Management & Business Excellence, Vol. 16 No. 10, pp. 1179-91.
27. Gladwin, B. (2003), “Six Sigma & simulation”, Promodel White Paper, available at: www.hearne.com.au/attachments/White%20Paper_Simulation%20Enhances%20Six%20Sigma.pdf (accessed 2 June 2010).
28. Goh, T.N. and Xie, M. (2004), “Improving on the Six Sigma paradigm”, TQM Magazine, Vol. 16 No. 4, pp. 235-40.
29. Gowen, C.R. III, Stock, G.N. and McFadden, K.L. (2008), “Simultaneous implementation of Six Sigma and knowledge management in hospitals”, International Journal of Production Research, Vol. 46 No. 23, pp. 6781-95.
30. Green, F.B. (2006), “Six-Sigma and the revival of TQM”, Total Quality Management & Business Excellence, Vol. 17 No. 10, pp. 1281-6.
31. Hagemeyer, C., Gershenson, J.K. and Johnson, D.M. (2006), “Classification and application of problem solving quality tools”, TQM Magazine, Vol. 18 No. 5, pp. 455-83.
32. Haikonen, A., Savolainen, T. and Järvinen, P. (2004), “Exploring Six Sigma and CI capability development: preliminary case study findings on management role”, Journal of Manufacturing Technology Management, Vol. 15 No. 4, pp. 369-78.
33. Halliday, S. (2005), “Application of tools in Six Sigma”, available at: www.wdpc.co.uk/articles/tools6sig.pdf (accessed 25 November 2009).
34. Hammer, M. (2002), “Process management and the future of Six Sigma”, MIT Sloan Management Review, Vol. 43 No. 2, pp. 26-32.
35. Han, H.S., Chae, M.J., Im, K.S. and Ryu, H.D. (2008), “Six Sigma-based approach to improve performance in construction operations”, Journal of Management in Engineering, Vol. 24 No. 1, pp. 21-31.
36. Hensley, R.L. and Dobie, K. (2005), “Assessing readiness for Six Sigma in a service setting”, Managing Service Quality, Vol. 15 No. 1, pp. 82-101.
37. Hong, K., Nagarajah, R., Iovenitti, P. and Dunn, M. (2007), “A sociotechnical approach to achieve zero defect manufacturing of complex manual assemblies”, Human Factors and Ergonomics in Manufacturing, Vol. 17 No. 2, pp. 137-48.
38. Hsieh, C.T., Lin, B. and Manduca, B. (2007), “Information technology and Six Sigma implementation”, Journal of Computer Information Systems, Vol. 47 No. 4, pp. 1-10.
39. Johnston, A.B., Maguire, L.P. and McGinnity, T.M. (2008), “Disentangling causal relationships of a manufacturing process using genetic algorithms and Six-Sigma techniques”, International Journal of Production Research, Vol. 46 No. 22, pp. 6251-68.
40. Kumar, M., Antony, J., Antony, F.J. and Madu, C.N. (2006), “Winning customer loyalty in an automotive company through Six Sigma: a case study”, Quality Reliability Engineering International, Vol. 23, pp. 849-66.
41. Kumar, M., Antony, J., Madu, C.N., Montgomery, D.C. and Park, S.H. (2008), “Common myths of Six Sigma demystified”, International Journal of Quality & Reliability Management, Vol. 25 No. 8, pp. 878-95.
42. Kumar, S. and Bauer, K.F. (2010), “Exploring the use of lean thinking and Six Sigma in public housing authorities”, Quality Management Journal, Vol. 17 No. 1.
43. Kumar, S., Jensen, H. and Menge, H. (2008), “Analyzing mitigation of container security risk using Six Sigma DMAIC approach in supply chain design”, Transportation Journal, Vol. 47 No. 2, pp. 54-67.
44. Kumar, U.D., Nowicki, D., Ramirez-Marquez, J.R. and Verma, D. (2007), “On the optimal selection of process alternatives in a Six Sigma implementation”, International Journal of Production Economics, Vol. 111, pp. 456-67.
45. Kwak, Y.H. and Anbari, F.T. (2006), “Benefits, obstacles and future of Six Sigma approach”, Technovation, Vol. 26 Nos 5-6, pp. 708-15.
46. Lee-Mortimer, A. (2006), “Six Sigma: a vita improvement approach when applied to the right problems, in the right environment”, Assembly Automation, Vol. 26 No. 1, pp. 10-17.
47. Lee-Mortimer, A. (2007), “Leading UK manufacturer probes the potential of Six Sigma”, Assembly Automation, Vol. 27 No. 4, pp. 302-8.
48. Lin, L.C., Li, T.S. and Kiang, J.P. (2008), “A continual improvement framework with integration of CMMI and Six-Sigma model for auto industry”, Quality & Reliability Engineering International, Vol. 25 No. 5, pp. 551-69.
49. McAdam, R. and Evans, A. (2004), “Challenges to Six Sigma in a high technology mass manufacturing environments”, Total Quality Management, Vol. 15 Nos 5-6, pp. 699-706.
50. McAdam, R. and Laffert, B. (2004), “A multilevel case study critique of Six Sigma: statistical control or strategic change?”, International Journal of Operations & Production Management, Vol. 24 Nos 5-6, pp. 530-49.
51. McCarthy, B. and Stauffer, R. (2001), “Enhancing Six Sigma through simulation with iGrafx process for Six Sigma”, Proceedings of the 2001 Winter Simulation Conference, 2, 9-12 December 2001, Arlington, VA, pp. 1241-7.
52. Maciel Junior, H., Batista Turrioni, J., Cesar Rosati, A., Garcia Neto, D., Kenji Goto, F., Fujioka Mologni, J. and Machado Fernandes, M. (2008), “Application of design for Six Sigma (DFSS) on an automotive technology development process”, SAE Technical paper series, SAE International, Warrendale, PA.
53. Mader, D.P. (2006), “Deploying the ‘D’ in DFSS”, Quality Progress, Vol. 39 No. 7, pp. 73-4.
54. Mahanti, R. and Antony, J. (2005), “Confluence of Six Sigma, simulation and software development”, Managerial Auditing Journal, Vol. 20 No. 7, pp. 739-62.
55. Markarian, J. (2004), “What is Six Sigma?”, Reinforced Plastics, July-August, pp. 46-9.
56. Miron, J.R. and Skarke, P. (1981), “Non-price information and price sustainability in the Koopmanns-Beckmann problem”, Journal of Regional Science, Vol. 21 No. 1, pp. 117-22.
57. Mitra, A. (2004), “Six Sigma education: a critical role for academia”, TQM magazine, Vol. 16 No. 4, pp. 293-302.
58. Montes, F.J.L. and Molina, L.M. (2006), “Six Sigma and management theory: processes, content and effectiveness”, Total Quality Management, Vol. 17 No. 4, pp. 485-506.
59. Morgan, J. and Brennig, M.J. (2006), “Six Sigma and the future of quality”, Management Services, Vol. 50 No. 2, pp. 46-7.
60. Murugappan, M. and Keeny, G. (2003), “Blending CMM and Six Sigma to meet business goals”, IEEE Software, Vol. 20 No. 2, pp. 42-8.
61. Näslund, D. (2008), “Lean, Six Sigma and lean sigma: fads or real process improvement methods?”, Business Process Management Journal, Vol. 14 No. 3, pp. 269-87.
62. Nonthaleerak, P. and Hendry, L. (2008), “Exploring the Six Sigma phenomenon using multiple case study evidence”, International Journal of Operations & Production Management, Vol. 28 No. 3, pp. 279-303.
63. Oke, S.A. (2007), “Six Sigma: a literature review”, South African Journal of Industrial Engineering, Vol. 18 No. 2, pp. 109-29.
64. Pantano, V., Kane, P.O. and Smith, K. (2006), “Cluster-based Six Sigma deployment in small and medium sized enterprises”, Management of Innovation and Technology, Vol. 2, pp. 788-92.
65. Patel, S.C. and Zu, X. (2009), “E-government application development using the Six Sigma approach”, Electronic Government: an International Journal, Vol. 6 No. 3, pp. 295-306.
66. Pheng, L.S. and Hui, M.S. (2004), “Implementing and applying Six Sigma in construction”, Journal of Construction Engineering and Management, Vol. 130 No. 4, pp. 482-9.
67. Proudlove, N., Moxham, C. and Boaden, R. (2008), “Lessons for lean in healthcare from using Six Sigma in the NHS”, Public Money & Management, Vol. 28 No. 1, pp. 27-34.
68. Raja, A. (2006), “Simple tools for complex systems”, Quality Progress, Vol. 39 No. 6, pp. 40-4.
69. Ranch, H. (2006), “Xerox find the right tool for tracking continuous improvement”, Manufacturing Business Technology, Vol. 24 No. 2, pp. 42-5.
70. Savolainen, T. and Haikonen, A. (2007), “Dynamics of organizational learning and continuous improvement in Six Sigma implementation”, TQM Magazine, Vol. 19 No. 1, pp. 6-17.
71. Schroeder, R.G., Linderman, K., Liedtke, C. and Choo, A.S. (2008), “Six Sigma: definition and underlying theory”, Journal of operations management, Vol. 26, pp. 536-54.
72. Sehwail, L. and DeYong, C. (2003), “Six Sigma in health care”, Leadership in Health Services, Vol. 16 No. 4, pp. 1-5.
73. Senapati, N.R. (2004), “Quality and reliability corner: Six Sigma: myths and realities”, International Journal of Quality & Reliability Management, Vol. 21 Nos 67, pp. 683-90.
74. Shah, R., Chandrasekaran, A. and Linderman, K. (2008), “In pursuit of implementation patterns: The context of lean and Six Sigma”, International Journal of Production Research, Vol. 46 No. 23, pp. 6679-99.
75. Teresko, J. (2008), “How to organize for lean/Six Sigma”, Industry Week, Vol. 257 No. 11, pp. 38-41.
76. Thawani, S. (2004), “Six Sigma - strategy for organizational excellence”, Total Quality Management, Vol. 15 Nos 5-6, pp. 655-64.
77. Thawesaengskulthai, N. and Tannock, J.D.T. (2008), “A decision aid for selecting improvement methodologies”, International Journal of Production Research, Vol. 46 No. 23, pp. 6721-37.
78. Thomas, A., Barton, R. and Chuke-Okafor, C. (2009), “Applying lean Six Sigma in a small engineering company - a model for change”, Journal of Manufacturing Technology Management, Vol. 20 No. 1, pp. 113-29.
79. van den Heuvel, J., Does, R.J.M.M. and Verver, J.P.S. (2005), “Six Sigma in healthcare: lessons learned from a hospital”, International Journal of Six Sigma and Competitive Advantage, Vol. 1 No. 4, pp. 380-8.
80. van Iwaarden, J., van Der Wiele, T., Dale, B., Williams, R. and Bertsch, B. (2008), “The Six Sigma improvement approach: a transnational comparison”, International Journal of Production Research, Vol. 46 No. 23, pp. 6739-58.
81. Ward, S.W., Poling, S.R. and Clipp, P. (2008), “Selecting successful Six Sigma projects”, Quality, Vol. 47 No. 10, pp. 50-1.
82. Watson, G.H. (2005), Design for Six Sigma: Innovation for Enhanced Competitiveness, Goal/QPC, Salem, NH.
83. Watson, G.H. and deYong, C.F. (2010), “Design for Six Sigma: caveat emptor”, International Journal of Lean Six Sigma, Vol. 1 No. 1, pp. 66-84.
84. Wei, C., Sheen, G., Tai, C. and Lee, K. (2010), “Using Six Sigma to improve replenishment process in a direct selling company”, Supply Chain Management, Vol. 15 No. 1, pp. 3-9.
85. Welch, J. (2005), “Six Sigma leaders”, Quality, Vol. 44 No. 3, p. 80.
86. William, S. (2009), “The lean toolkit, Part I”, CiruiTree, Vol. 22 No. 2, p. 36.
87. Yang, H.M., Choi, B.S., Park, H.J., Suh, M.S. and Chae, B. (2007), “Supply chain management Six Sigma: a management innovation methodology at the Samsung Group”, Supply Chain Management: An International Journal, Vol. 12 No. 2, pp. 88-95.