Chemical vapour deposition methods for protection against wear

Surface Coatings for Protection Against Wear

Volumn , Issue , 2006, Pages 101-145

  Wheeler, D W ^a  

^a AWE   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CONDENSED MATTER PHYSICS; SURFACES;

CHEMICAL VAPOUR DEPOSITION;

CHEMICAL VAPOR DEPOSITION;

EID: 84904080823     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9781845691561.101     Document Type: Chapter

References (148)

1. Ajayi O.O., Ludema K.C. Surface Modification and Mechanisms 2004, 701-722. Marcel Dekker, New York, 'Designing for wear life and frictional performance'. G.E. Totten, H. Liang (Eds.).
2. Proceedings of the 16th International Conference and the 14th European Conference on Chemical Vapour Deposition 2003, Electrochemical Society, Pennington, New Jersey. M. Allendorf, F. Maury, F. Teyssandier (Eds.).
3. Arai T., Fujita H., Oguri K. Plasma-assisted chemical vapour deposition of TiN and TiC on steel: properties of coatings. Thin Solid Films 1988, 165:139-148.
4. 1-x. Thin Solid Films 1981, 80:221-225.
5. Archer N.J., Yee K.K. Chemical vapour deposited tungsten carbide wear-resistant coatings formed at low temperatures. Wear 1978, 48:237-250.
6. Ashfold M.N.R., May P.W., Petherbridge J.R., Rosser K.N., Smith J.A., Mankelevich Y.A., Suetin N.V. Unravelling aspects of the gas phase chemistry involved in diamond chemical vapour deposition. Phys. Chem. Chem. Phys 2001, 3:3471-3485.
7. Bello I., Chan C.Y., Zhang W.J., Chong Y.M., Leung K.M., Lee S.T., Lifshitz Y. Deposition of thick cubic boron nitride films: the route to practical applications. Diamond Relat. Mater 2005, 14:1154-1162.
8. Bjork T., Bergstrom J., Hogmark S. World Tribology Congress: Abstracts of Papers 1997, 332. Mechanical Engineering Publications, London, 'Tribological simulation of aluminium hot extrusion'.
9. Boer H.J. Mass flow controlled evaporation system. Proceedings of the 10th European Conference on Chemical Vapour Deposition 1995, 961-966. Les Editions de Physique, Les Ulis. G.A. Battiston, R. Gerbasi, M. Porchia (Eds.).
10. Bose K., Wood R.J.K. Influence of load and speed on rolling microabrasion of CVD diamond and other hard coatings. Diamond Relat. Mater 2003, 12:753-756.
11. Bose K., Wood R.J.K. High velocity solid particle erosion behaviour of CVD boron carbide on tungsten carbide. Wear 2005, 258:366-376.
12. Bose K., Wood R.J.K. Optimum test conditions for attaining uniform rolling abrasion in ball cratering tests on hard coatings. Wear 2005, 258:322-332.
13. Bose K., Wood R.J.K., Wheeler D.W. High energy solid particle erosion mechanisms of superhard CVD coatings. Wear 2005, 259:135-144.
14. Boving H.J., Hintermann H.E. Properties and performance of chemical vapour deposited TiC-coated ball-bearing components. Thin Solid Films 1987, 153:253-266.
15. Brutsch R. Chemical vapour deposition of silicon carbide and its applications. Thin Solid Films 1985, 126:313-318.
16. Bryant W.A. The fundamentals of chemical vapour deposition. J. Mater. Sci 1977, 12:1285-1306.
17. Bull S.J. Tribology of carbon coatings: DLC, diamond and beyond. Diamond Relat. Mater 1995, 4:827-836.
18. Bull S.J., Chalker P.R., Johnston C., Moore V. The effect of roughness on the friction and wear of diamond thin films. Surf. Coat. Technol 1994, 68-69:603-610.
19. Bunshah R.F. Handbook of Hard Coatings: Deposition Technologies, Properties and Applications 2001, Noyes Publications, Park Ridge, New Jersey.
20. Butler J.E., Woodin R.L. Thin film diamond growth mechanisms. Phil. Trans. R. Soc. A 1993, 342:209-224.
21. Chhowalla M. Thick, well-adhered, highly stressed tetrahedral amorphous carbon. Diamond Relat. Mater 2001, 10:1011-1016.
22. Chin J., Gantzel P.K., Hudson R.G. The structure of chemical vapour deposited silicon carbide. Thin Solid Films 1977, 40:57-72.
23. Chowdhury S., de Barra E., Laugier M.T. Hardness measurement of CVD diamond coatings on SiC substrates. Surf. Coat. Technol 2005, 193:200-205.
24. Choy K.L. Chemical vapour deposition of coatings. Prog. Mater. Sci 2003, 48:57-170.
25. Chu P.K., Tian X. Surface Modification and Mechanisms 2004, 543-602. Marcel Dekker, New York, 'Plasma-based surface modification'. G.E. Totten, H. Liang (Eds.).
26. Clark I.E., Sen P.K. Advances in the development of ultrahard cutting tool materials. Ind. Diamond Rev 1998, 58:40-44.
27. Clark C.C. Solid particle erosion performance of a new ultradurable AR for silicon. Proc. SPIE 2001, 4375:275-282.
28. Collins J.L. Diamond-like carbon (DLC) - a review. Ind. Diamond Rev 1998, 58:90-92.
29. Dubar M., Dubois A., Dubar L. Wear analysis of tools in cold forging: PVD versus CVD TiN coatings. Wear 2005, 259:1109-1116.
30. Enke K. Dry machining and increase of endurance of machine parts with improved doped DLC coatings on steel, ceramics and aluminium. Surf. Coat. Technol 1999, 116-119:488-491.
31. Erdemir A. Chemical Vapor Deposition 2001, 379-399. ASM International, Metals Park, Ohio, 'CVD diamond films in tribological applications'. J.H. Park, T.S. Sudarshan (Eds.).
32. Eskildsen S.S., Mathiasen C., Foss M. Plasma CVD: process capabilities and economic aspects. Surf. Coat. Technol 1999, 116-119:18-24.
33. Field J.E. The Properties of Natural and Synthetic Diamond 1992, Academic Press, New York.
34. Field J.E., Pickles C.S.J. Strength, fracture and friction properties of diamond. Diamond Relat. Mater 1996, 5:625-634.
35. Gangopadhyay A. Mechanical and tribological properties of amorphous carbon films. Tribol. Lett 1998, 5:25-39.
36. Gibson D.R., Waddell E.M., Kerr J.W., Wilson A.D., Lewis K.L. Ultra-durable phosphide based anti-reflection coatings for sand and rain erosion protection. Proc. SPIE 1992, 1760:178-200.
37. Gibson D.R., Waddell E.M., Lewis K.L. Advances in ultradurable phosphide-based broadband anti-reflection coatings for sand and rain erosion protection of infrared windows and domes. Proc. SPIE 1994, 2286:335-346.
38. Gibson D.R., Waddell E.M., Wilson A.D., Lewis K.L. Ultra-durable phosphide based anti-reflection coatings for sand and rain erosion protection. Opt. Engng 1994, 33:957-966.
39. Goela J.S., Askinazi J. Fabrication of conformal ZnS domes by chemical vapour deposition. Proc. SPIE 1999, 3705:227-236.
40. Goela J.S., Burns L.E., Taylor R.L. Transparent chemical vapour deposited β-SiC. Appl. Phys. Lett 1994, 64:131-133.
41. Goela J.S., Pickering M.A., Taylor R.L., Murray B.W., Lompado A. Properties of chemical-vapour-deposited silicon carbide for optics applications in severe environments. Appl. Optics 1991, 30:3166-3175.
42. Goela J.S., Taylor R.L. Monolithic material fabrication by chemical vapour deposition. J. Mater. Sci 1988, 23:4331-4339.
43. Goldman L.M., Tustison R.W. High durability infrared transparent coatings. Proc. SPIE 1994, 2286:316-324.
44. Goto T. Thermal barrier coatings deposited by laser CVD. Surf. Coat. Technol 2005, 198:367-371.
45. 3 system. J. Mater. Sci 1992, 27:247-254.
46. Halwax J., Pfaffenberger R. CVD diamond tools machining aluminium in the new 5-series BMWs. Ind. Diamond. Rev 2004, 64:21-22.
47. Hampden-Smith M.J., Kodas T.T., Ludviksson A. Chemistry of Advanced Materials: An Overview 1998, 143-206. Wiley-VCH, New York, 'Chemical vapour deposition'. L.V. Interrante, M.J. Hampden-Smith (Eds.).
48. Harker R.M. Synthesis and characterisation of novel precursors for chemical vapour deposition of silver 1996, PhD Thesis, University of Bath.
49. 2 pretreatment of WC-Co hard metal substrate to increase the adhesion of CVD diamond coatings. Proceedings of the 10th European Conference on Chemical Vapour Deposition 1995, 753-760. J. Phys, Paris, IV, 5. G. Battiston (Ed.).
50. Heim D., Holler F., Mitterer C. Hard coatings produced by PACVD applied to aluminium die casting. Surf. Coat. Technol 1999, 116-119:530-536.
51. Hess D.W., Graves D.B. Chemical Vapour Deposition: Theory and Applications 1993, 385-435. Academic Press, New York, 'Plasma-assisted chemical vapour deposition'. M.L. Hitchman, K.F. Jensen (Eds.).
52. Hintermann H.E. Tribological and protective coatings by chemical vapour deposition. Thin Solid Films 1981, 84:215-243.
53. Hitchman M.L., Jensen K.F. Chemical Vapour Deposition: Theory and Applications 1993, Academic Press, New York.
54. Hollman P., Bjorkman H., Alahelisten A., Hogmark S. Diamond coatings applied to mechanical face seals. Surf. Coat. Technol 1998, 105:169-174.
55. Hudson M.D., Brierley C.J., Miller A.J., Wilson A.E.J. Fabrication and testing of diamond coatings on infrared windows for the Harrier GR7 and AV8-B systems. Proc. SPIE 1997, 3060:196-202.
56. Jansson U., Carlsson J.O. Chemical vapour deposition of boron carbides in the temperature range 1300-1500K and at a reduced pressure. Thin Solid Films 1985, 125:101-107.
57. Jensen K.F. Chemical Vapour Deposition: Theory and Applications 1993, 31-90. Academic Press, New York, 'Fundamentals of chemical vapour deposition'. M.L. Hitchman, K.F. Jensen (Eds.).
58. Jilbert G.H., Field J.E. Optimum coating thickness for the protection of zinc sulphide and germanium substrates from solid particle erosion. Wear 1998, 217:15-23.
59. Jilbert G.H., Pickles C.S.J., Coad E.J., Field J.E. Diamond: an erosion resistant aerospace material. Applications of Diamond Films and Related Materials: 3rd International Conference, NIST Special publication 885 1995, 561-564. National Institute of Standards and Technology, Gaithersburg, Maryland.
60. Kamo M., Sato Y., Matsumoto S., Setaka N. Diamond synthesis from gas phase in microwave plasma. J. Cryst. Growth 1982, 62:642-645.
61. 2 nanocomposite coatings prepared by plasma induced chemical vapour deposition. Surf. Coat. Technol 2005, (in press).
62. x/a-BN coatings prepared by plasma CVD and PVD: a comparative study of their properties. Surf. Coat. Technol 2003, 163-164:149-156.
63. Karve P., Pal J.P., Ogale S.B. Chemical Vapour Deposition 2001, 331-377. ASM International, Metals Park, Ohio, 'CVD diamond, diamond-like carbon and carbonnitride coatings'. J.H. Park, T.S. Sudarshan (Eds.).
64. Kennedy F.E., Lidhagen D., Erdemir A., Woodford J.B., Kato T. Tribological behaviour of hard carbon coatings on steel substrates. Wear 2003, 255:854-858.
65. Kessler O.H. Chemical Vapor Deposition 2001, 435-463. ASM International, Materials Park, Ohio, 'Heat treatment of CVD-coated tools steels'. J.H. Park, T.S. Sudarshan (Eds.).
66. Kessler O., Surm H., Hoffmann F., Mayr P. Enhancing surface hardness of titanium alloy Ti-6Al-4V by combined nitriding and CVD coating. Surf. Engng 2002, 18:299-304.
67. 4-TiC composite ceramics by chemical vapour deposition. Thin Solid Films 1988, 165:149-161.
68. 2/Ar gas mixture. Thin Solid Films 1996, 283:165-170.
69. Kim Y., Zangvil A., Goela J.S., Taylor R.L. Microstructure comparison of transparent and opaque CVD SiC. J. Am. Ceram. Soc 1995, 78:1571-1579.
70. Knight D.S., White W.B. Characterisation of diamond films by Raman spectroscopy. J. Mater. Res 1989, 4:383-393.
71. Knotek O., Loffler F., Kramer G. Handbook of Hard Coatings: Deposition Technologies, Properties and Applications 2001, 370-410. Noyes Publications, Park Ridge, New Jersey, 'Applications to cutting tools'. R.F. Bunshah (Ed.).
72. Koike K., Tanga M., Hayashida T., Shinohara N. Coating of CVD diamond on cemented carbide and evaluation of its wear resistance. Hyomen Gijutsu 1997, 48:49-53.
73. Kumashiro Y. Refractory semiconductor of boron phosphide. J. Mater. Res 1990, 5:2933-2947.
74. 4 on CVD β-SiC growth. J. Electrochem. Soc 1990, 137:3688-3692.
75. Lartigue S., Male G. Contribution to the study of tetragonal compounds in the boron carbon system. J. Mater. Sci. Lett 1988, 7:153-156.
76. Lassner E., Schubert W.D. Tungsten 1999, 352-353. Kluwer-Plenum, New York.
77. Lee C.W., Nam S.W., Chun J.S. A phenomenological study of the nucleation and growth of chemically vapour deposited TiC coatings on cemented carbide. Thin Solid Films 1981, 86:63-71.
78. Lee K.W., Harris S.J. Boron carbide films grown from microwave plasma chemical vapour deposition. Diamond Relat. Mater 1998, 7:1539-1543.
79. Lettington A.H. Applications of diamond-like carbon thin films. Phil. Trans. R. Soc. A 1993, 342:287-296.
80. 3. Thin Solid Films 1994, 253:311-317.
81. Loubet J.L., Georges J.M., Kapsa P. Measurements of thin films adhesion and mechanical properties with indentation curves. Mechanics of Coatings, Proceedings of the 16th Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series, Vol. 17 1989, 429-434. Elsevier, Amsterdam. D. Dowson, C.M. Taylor, M. Godet (Eds.).
82. Lux B., Colombier C., Altena H., Stjernberg K. Preparation of alumina coatings by chemical vapour deposition. Thin Solid Films 1986, 138:49-64.
83. Mackowski J.M., Cimma B., Lacuve J., Laprat P. Optical and mechanical behaviour of GeC and BP antireflection coatings under rain erosion tests. Proc. SPIE 1994, 2286:552-560.
84. Matsumoto S., Sato Y., Tsutsumi M., Setaka N. Growth of diamond particles from methane-hydrogen gas. J. Mater. Sci 1982, 17:3106-3112.
85. Matsumoto S., Zhang W.J. The introducing of fluorine into the deposition of BN: a successful method to obtain high-quality, thick cBN films with low residual stress. Diamond Relat. Mater 2001, 10:1868-1874.
86. May P.W. Diamond thin films: a 21st century material. Phil. Trans. R. Soc. A 2000, 358:473-495.
87. Mitchell S. Extend valve component lifetimes with Hardide coatings. Valve World, August 2004, 56-57.
88. Mond L., Langer C., Quinke F. Action of carbon monoxide on nickel. J. Chem. Soc 1890, 57:749-753.
89. Mosebach H., Hopfe V., Erhard M., Meyer M. Monitoring of SiC deposition in an industrial CVI/CVD reactor by in situ FTIR spectroscopy. Proceedings of the 10th European Conference on Chemical Vapour Deposition 1995, 97-104. Les Editions de Physique, Les Ulis. G.A. Battiston, R. Gerbasi, M. Porchia (Eds.).
90. 2-argon mixtures. J. Am. Ceram. Soc 1998, 81:3077-3086.
91. 2-Ar system. J. Mater. Sci 1986, 21:1363-1367.
92. Nicholson E.D., Field J.E. The mechanical and thermal properties of thin films. J. Hard Mater 1994, 5:89-132.
93. Niihara K., Nakahira A., Hirai T. The effect of stoichiometry on the mechanical properties of boron carbide. J. Am. Ceram. Soc 1984, 67:C13-C14.
94. Nishinaga T., Ogawa H., Watanabe H., Arizumi T. Vapour growth of boron monophosphide using open and closed tube processes. J. Cryst. Growth 1972, 13-14:346-349.
95. Olsson M., Hedenqvist P., Stridh B., Soderberg S. Solid particle erosion of hard chemically vapour-deposited coatings. Surf. Coat. Technol 1989, 37:321-337.
96. Olsson M., Stridh B., Jansson U., Carlsson J.O., Soderberg S. Mechanical and tribological properties of chemically vapour-deposited boron carbide coatings. Mater. Sci. Engng 1988, A105-A106:453-463.
97. Chemical Vapour Deposition 2001, ASM International, Materials Park, Ohio. J.H. Park, T.S. Sudarshan (Eds.).
98. Pickering M.A., Taylor R.L., Keeley J.T., Graves G.A. Chemically vapour deposited silicon carbide (SiC) for optical applications. Nucl. Instrum. Meth. A 1990, 291:95-100.
99. Pierson H. Handbook of Carbon, Graphite, Diamond and Fullerenes 1993, Noyes Publishers, Park Ridge, New Jersey.
100. Powell C.F., Oxley J.H., Blocher J.M. Vapour Deposition 1966, John Wiley, New York.
101. Price J.B., Borland J.O., Selbrede S. Properties of chemical-vapourdeposited titanium nitride. Thin Solid Films 1993, 236:311-318.
102. Pricken W. Dressing of vitrified bond wheels with CVDRESS and MONODRESS. Ind. Diamond Rev 1999, 59:225-231.
103. Radhakrishnan G., Uht J.C., Park W., Hilton M.R., Adams P.M., Ward P.C., Herbert E.G., Lucas B.N. Rolling contact fatigue of TiC-coated bearing balls. Mater. Res. Soc. Symp. Proc 1998, 522:445-450.
104. Rebenne H.E., Bhat D.G. Review of CVD TiN coatings for wearresistant applications: deposition processes, properties and performance. Surf. Coat. Technol 1994, 63:1-13.
105. Rey J., Kapsa P., Male G. Dry friction and wear of chemically vapour deposited boron carbide coatings. Surf. Coat. Technol 1988, 36:375-386.
106. Rey J., Male G., Kapsa P., Loubet J.L. Boron carbide coatings: correlation between mechanical properties and LPCVD parameters values. J. Phys., Paris, Colloque C5 1989, 50:311-321.
107. Richter A., Ries R., Smith R., Henkel M., Wolf B. Nanoindentation of diamond, graphite and fullerene films. Diamond Relat. Mater 2000, 9:170-184.
108. Saito Y., Matsuda S., Nogita S. Synthesis of diamond by decomposition of methane in microwave plasma. J. Mater. Sci. Lett 1986, 5:565-568.
109. Samoilenkov S.V., Stefan M.A., Wahl G. MOCVD of thick YSZ coatings using acetylacetonates. Surf. Coat. Technol 2005, 192:117-123.
110. Sarin V.K., Lindstrom J.N. The effect of eta phase on the properties of CVD TiC-coated cemented carbide cutting tools. J. Electrochem. Soc 1979, 126:1281-1287.
111. Sato Y., Kamo M. Texture and some properties of vapour-deposited diamond films. Surf. Coat. Technol 1989, 39-40:183-198.
112. Sawyer W.E., Mann A. Carbon for electric lights. US Pat. 1880, 229(335).
113. Schlichting J. Chemical vapour deposition of silicon carbide. Powder Metall. Int 1980, 12:141-147.
114. Schlichting J. Chemical vapour deposition of silicon carbide. Powder Metall. Int 1980, 12:196-200.
115. Seward C.R., Coad E.J., Pickles C.S.J., Field J.E. The liquid impact resistance of a range of IR-transparent materials. Wear 1995, 186-187:375-383.
116. Shanov V., Tabakoff W., Metwally M. Erosive wear of CVD ceramic coatings exposed to particulate flow. Surf. Coat. Technol 1992, 54-55:25-31.
117. Shen C.H. Performance and applications of CVD thin film diamond coated tools. Key Engng Mater 1998, 138-140:25-55.
118. Sheikh-Ahmad J.Y., Stewart J.S., Feld H. Failure characteristics of diamond-coated carbides in machining wood-based composites. Wear 2003, 255:1433-1437.
119. Soderberg S., Sjostrand M., Ljungberg B. Advances in coating technology for metal cutting tools. Met. Powder Rep 2001, 56:24-30.
120. Spitsyn B.V., Bouilov L.L., Derjaguin B.V. Vapour growth of diamond on diamond and other surfaces. J. Cryst. Growth 1981, 52:219-226.
121. Stridh B., Hedenqvist P., Olsson M., Soderberg S. Solid particle erosion of thin ceramic coatings. Proceedings of the 7th International Conference on Erosion by Liquid and Solid Impact, Cambridge, 1987 1987, 19.1-19.8. Cavendish Laboratory, Cambridge.
122. Sundgren J.E., Hentzell H.T.G. A review of the present state of art in hard coatings grown from the vapour phase. J. Vac. Sci. Technol. A 1986, 4:2259-2279.
123. Tabakoff W. Protection of coated superalloys from erosion in turbomachinery and other systems exposed to particulate flows. Wear 1999, 233-235:200-208.
124. Takenaka T., Takigawa M., Shohno K. Hardness of boron monophosphide. Jap. J. Appl. Phys 1976, 15:2235-2236.
125. 3 coatings by pulsed d.c. PACVD. Surf. Coat. Technol 1999, 116-119:891-897.
126. Tu R., Kimura T., Goto T. High-speed deposition of yttria stabilised zirconia by MOCVD. Surf. Coat. Technol 2004, 187:238-244.
127. Vandenbulcke L., Vuillard G. Composition and structural changes of boron carbides deposited by chemical vapour deposition under various conditions of temperatures and pressures. J. Less-Common Metals 1981, 82:49-56.
128. Veprek S. Surface processes and rate-determining steps in plasma-induced chemical vapour deposition: titanium nitride, boron carbide and silicon. Surf. Coat. Technol 1990, 43-44:154-166.
129. Veprek S., Haussmann M., Reiprich S., Shizhi L., Dian J. Novel thermodynamically stable and oxidation resistant superhard coating materials. Surf. Coat. Technol 1996, 86-87:394-401.
130. Veprek S., Nesladek P., Niederhofer A., Glatz F., Jilek M., Sima M. Recent progress in the superhard nanocrystalline composites: towards their industrialization and understanding of the origin of the superhardness. Surf. Coat. Technol 1998, 108-109:138-147.
131. v = 80 to ≥ 105GPa. Surf. Coat. Technol 2000, 163-164:149-156.
132. Veprek S., Reiprich S. A concept for the design of novel superhard coatings. Thin Solid Films 1995, 268:64-71.
133. Vuorinen S., Karlsson L. Phase transformation in chemically vapour-deposited κ-alumina. Thin Solid Films 1992, 214:132-143.
134. Waddell E.M., Clark C.C. Boron phosphide films on new substrate materials. Proc. SPIE 1999, 3705:152-162.
135. Waddell E.M., Gibson D.R., Meredith J. Sand impact testing of durable coatings on FLIR ZnS relevant to the Lantirn E-O system window. Proc. SPIE 1994, 2286:364-375.
136. Waddell E.M., Gibson D.R., Wilson M. Broadband IR transparent rain and sand erosion protective coating for the F14 aircraft infra-red search and track germanium dome. Proc. SPIE 1994, 2286:376-385.
137. Wheeler D.W. Solid particle erosion of CVD diamond coatings 2001, PhD Thesis, University of Southampton.
138. Wheeler D.W., Wood R.J.K. Erosive wear behaviour of thick chemical vapour deposited diamond coatings. Wear 1999, 225-229:523-536.
139. Wheeler D.W., Wood R.J.K. Solid particle erosion of CVD diamond coatings. Wear 1999, 233-235:306-318.
140. Wheeler D.W., Wood R.J.K. High velocity sand impact damage on CVD diamond. Diamond Relat. Mater 2001, 10:459-462.
141. Wheeler D.W., Wood R.J.K. CVD diamond: erosion-resistant hard material. Surf. Engng 2003, 19:466-470.
142. Wheeler D.W., Wood R.J.K. Solid particle erosion behaviour of CVD boron phosphide coatings. Surf. Coat. Technol 2005, (in press).
143. Wheeler D.W., Wood R.J.K., Harrison D., Smith E. Application of diamond to enhance choke valve life in erosive duties. Wear 2005, (submitted).
144. Wick C., Veilleux R.F. Tool and Manufacturing Engineers Handbook, Vol. III, Materials, Finishing and Coating 1985, 24-4-24-7. Society of Manufacturing Engineers, Dearborn, Michigan, 'Vapour deposition processes'.
145. Wood R.J.K., Wheeler D.W., Lejeau D.C., Mellor B.G. Sand erosion performance of CVD boron carbide coated tungsten carbide. Wear 1999, 233-235:134-150.
146. Yamauchi N., Demizu K., Ueda N., Cuong N.K., Sone T., Hirose Y. Friction and wear of DLC films on magnesium alloy. Surf. Coat. Technol 2005, 193:277-282.
147. Zhang W., Bello I., Lifshitz Y., Chan K.M., Meng X., Wu Y., Chan C.Y., Lee S.T. Epitaxy on diamond by chemical vapour deposition: a route to high-quality cubic boron nitride for electronic applications. Adv. Mater 2004, 16:1405-1408.
148. Zhu W., McCune R.C., de Vries J.E., Tamor M.A., Ng K.Y.S. Investigation of adhesion of diamond films on Mo, W and carburized W substrates. Diamond Relat. Mater 1995, 4:220-233.