Performance and Applications of CVD Thin Film Diamond Coated Tools

Key Engineering Materials

Volumn 138-140, Issue , 1998, Pages 25-55

  Shen, Chi Hung ^a  

^a GENERAL MOTORS CORPORATION   (United States)

Author keywords

390 aluminum; Abrasive wear; Adhesion strength; Carbide substrate; Chemical vapor deposition; Drilling; Film delamination; Flank wear; Flymilling; Metal matrix composites; Polycrystalline diamond; Surface roughness; Thin film; Tool life; Turning

Indexed keywords

ADHESION; BOND STRENGTH (MATERIALS); CHEMICAL VAPOR DEPOSITION; COATED MATERIALS; DELAMINATION; DIAMOND FILMS; FAILURE ANALYSIS; METALLIC MATRIX COMPOSITES; POLYCRYSTALLINE MATERIALS; SURFACE ROUGHNESS; TURNING; WEAR OF MATERIALS;

FLYMILLING;

CUTTING TOOLS;

EID: 0007727431     PISSN: 10139826     EISSN: 16629795     Source Type: Book Series    
DOI: None     Document Type: Article

References (49)

1. DeVries, R. C., "Synthesis of Diamond under Metastable Conditions", Annu. Rev. Mat. Sci., Vol. 17, 1987, p. 161-187.
2. Messier, R., et al., "From Diamond-like Carbon to Diamond Coatings", Thin Solid Films, Vol. 153, 1987, p. 1-9.
3. Angus, J. C., and Hayman, C. C., "Low Pressure Metastable Growth of Diamond and Diamond Like Phases", Science, Vol. 141, 1988, p.913-921.
4. Spear, K. E., "Diamond-Ceramic Coating of the Future", J. Am. Ceram. Soc., 72(2), 1989, p.171-191.
5. Bhat, D. G., "Diamond-Coated Cutting Tools - A Status Report", Mat. Tech., 9(1994), p.253-261.
6. Shen, C. H., "Agile and Green Manufacturing and Super Hard Coated Cutting Tools", Proc. Applied Diamond Conference 1995, Gaithersburg, MD., August 21-24, 1995, p.175-182.
7. Shen, C. H., "The Importance of Diamond Coated Tools for Agile Manufacturing and Dry Machining", ICMCTF, San Diego, CA., April 22-26, 1996.
8. Kennametal internal report "Project 2005 Technology Forecast", June 1994.
9. Lubrizol Corporation internal document.
10. Lux, B. and Haubner, R., "Low Pressure Synthesis of Superhard Coatings", Refractory Metals & Hard Materials, Vol. 8, No. 3, September 1989.
11. Oakes, J., et al., "CVD Diamond Coatings on Cemented Carbide Tools", 1st European Conference on Diamond and Diamond-Like Carbon Coatings, Sept. 17-19, 1990, p.1-14.
12. Saijo, K., et al., "Development of Diamond Coated Cemented Carbide Cutting Tool Inserts", Gorham International Conference on Diamond and DLC Coatings, Marco Island, FL., Oct. 15-17, 1989.
13. Kikuchi, N., "Applications of CVD Diamond for Cutting Inserts", Gorham International Conference on Diamond and DLC Coatings, Marco Island, FL., Oct. 15-17, 1989.
14. Kikuchi, N. and Yoshimura, H., "Diamond Coated Inserts Now", New Diamond, 1990, p.77-79.
15. Leyendecker, T., et al., "Industrial Application of Crystalline Diamond-Coated Tools", Surface and Coating Technology, Vol. 48 (1991), p.253-260.
16. Herb, J. A., "Evaluation of the Impact of Diamond Film Hardcoatings on the Machining of Non-Ferrous Materials", Vol. 1, Final Report to the National Center for Manufacturing Sciences, September 1991.
17. Chen, J. L., et al., "Diamond Film Growth on Cemented Tungsten Carbides Studied by SEM, AES, and XPS", Surface and Coatings Technology, 54/55 (1992), p.392-396.
18. Ito K., "Diamond Coated Cutting Insert by Using Carbon Monoxide as Source Gas", Gorham International Conference on Diamond and DLC Coatings, Marco Island, FL., Oct. 15-17, 1989.
19. Stephan, P. M., Hay, R. A., and Dean, C. D., "The New Diamond Technology and its Application in Cutting Tools", Diamond and Related Materials, Vol. 1, 1992, p.710-716.
20. Craig, P., "Thin-Film Diamond Derby", Cutting Tool Engineering, February 1992, p.23-31.
21. Noaker, P. M., "Diamond Thin Film", Manufacturing Engineering, July 1993, p.63-65.
22. Walton, K. R., et al., "Technology Assessment for CVD-Diamond-Coated Cutting Tool Inserts", Materials and Society, Vol. 13, No. 3, 1989, p.319-350.
23. Dismukes, j. P., "Technology Assessment and Manufacturing Cost Modeling of CVD Diamond Coatings", Gorham International Conference on Diamond and DLC Coatings, Marco Island, FL., Oct. 15-17, 1989.
24. Sevillano, E., et al., "Development of Large Scale Production Microwave CVD Diamond Deposition Reactors", ICMCTF, San Diego, CA., April 19-23, 1993.
25. Sevillano, E., "Large Scale Microwave CVD Diamond Production Reactors: Here and Now", ICMCTF, San Diego, CA., April 24-28, 1995.
26. Murakawa, M. and Takeuchi, S., "Diamond Coating Using Multiple Flame Torches in an Atmospheric Chamber", Surface and Coatings Technology, 54/55 (1992), p.403-407.
27. Hollman, P., "Residual Stress and Young's Modulus in Hot Flame Deposited Diamond Coatings", ICMCTF, San Diego, CA., April 24-28, 1995.
28. Mistry, P., "A Radical Process for Cost Effective Diamond Coated Products", Gorham Cutting Tools Conference, Atlanta, GA., March 13-14, 1995.
29. Shen, C. H., "Machining Performance of Thin Film Diamond Coated Inserts on 390Aluminum", Trans. NAMRI/SME, 22(1994), p.201-208.
30. Wilks, J. and Wilks, E., Properties and Applications of Diamond, Butterworth-Heinemann Ltd., 1991.
31. Bailey, M. W. and Hedges, L. K., "Crystal Morphology Identification of Diamond and CBN", Industrial Diamond Review, 1(1995), p. 11-14.
32. Bhat, D. G., et.al., "A Preliminary Investigation of the Effect of Post-Deposition Polishing of Diamond Films on the Machining Behavior of Diamond-Coated Cutting Tools", Dia. and Rel. Mat., 4(1995), p.921-929.
33. Diehl, M. D. and Durham, D. R., "Modeling of Thermal Behavior for Diamond Coated Alumina Tool Inserts", Technical Papers NAMRI/SME, 1994, p.76-81.
34. Hintermann, E. and Chattopadhyay, A. K., "Low Pressure Synthesis of Diamond Coatings", Annals of CIRP, Vol. 42/2 1993, p.769-783.
35. Bauer, C. E., Inspektor, A., and Oles, E. J., "Metacutting Performance of Diamond Coated WC-Co Inserts", ICMCTF, San Diego, CA., April 25-29, 1994.
36. Alverio, J., Agapiou, J. S., and Shen, C. H., "High Speed Drilling of 390 Aluminum", Trans. NAMRI/SME, 1990, p.209-215
37. Harkins, G. T., Shen, C. H., and McMillan, A. R., "Some Aspects of Machining with Ceramic Cutting Tools", Proc. Ceram. Eng. & Sci., 3[7-8], 1982, p.360-374.
38. Sen, P. K., "CVDITE-a New Type of Cutting Tool Insert", Industrial Diamond Review, May 1992, p.228-230.
39. Duralcan USA technical memo.
40. GE Superabrasives technical memo.
41. Oberoi, H., "A Comparative Study Monitoring the Wear & Cutting Parameters of CVD Diamond Coated Carbide Inserts vs. PCD Inserts while Turning Metal Matrix Composites", Gorham Cutting Tools Conference, Atlanta, GA., March 13-14, 1995.
42. Crystallume publications, 1995.
43. Kennametal publications, 1995.
44. Stephan, P. M., "Diamond Films Enhance Machining with Ceramics", Am. Ceramic Soc. Bull., 71(1992), p.1623-1629.
45. Norton Diamond Film publications, 1995.
46. Conner, L. C., "Diamond Film Technology: Bringing Products to Markets", Gorham International Conference on Diamond and DLC Coatings, Marco Island, FL., Oct. 15-17, 1989.
47. Russell, C. J., CVD Diamond and Related Superhard Materials, Vol. 1: Technology, Application, and Market Scenarios, 1993-2020, Decision Resources, Inc., 1993.
48. Conner, L. C., "Diamond Coated Cutting Tools: A New Era of Performance", Gorham International Conference on Cutting Tools, Orlando, FL., Feb. 13-15, 1994.
49. Hay, R. A., "Market Projections for CVD Diamond Cutting Tools", invited paper, presented at the Applied Diamond Conference 1995, Gaithersburg, MD., August 21-24, 1995.