Unified analysis of iterative learning and repetitive controllers in trial domain

IEEE Transactions on Automatic Control

Volumn 59, Issue 4, 2014, Pages 953-965

  Pipeleers, Goele ^a   Moore, Kevin L ^b  

^a UNIVERSITY OF LEUVEN   (Belgium)

^b Department of Metallurgical and Materials Engineering   (United States)

Author keywords

Iterative learning control (ILC); repetitive control (RC)

Indexed keywords

ITERATIVE METHODS;

ANALYSIS TECHNIQUES; ITERATIVE LEARNING CONTROL; MONOTONIC CONVERGENCE; REPETITIVE CONTROL; REPETITIVE CONTROLLER; STEADY STATE PERFORMANCE; THEORETIC ANALYSIS; UNIFIED FORMULATIONS;

TWO TERM CONTROL SYSTEMS;

EID: 84897400640     PISSN: 00189286     EISSN: None     Source Type: Journal    
DOI: 10.1109/TAC.2014.2298142     Document Type: Article

References (60)

1. N. Amann,D. Owens, and E. Rogers, "Iterative learning control for discrete-time systems with exponential rate of convergence," Proc. Inst. Elect. Eng., vol. 143, no. 2, pp. 217-224, 1996. (Pubitemid 126760895)
2. N. Amann, D. Owens, E. Rogers, and A. Wahl, "An approach to linear iterative learning control design," Int. J. Adaptive Control Signal Processing, vol. 10, no. 6, pp. 767-781, 1996. (Pubitemid 126527187)
3. S. Arimoto, S. Kawamura, and F. Miyazaki, "Bettering operation of robots by learning," J. Robot. Syst., vol. 1, no. 2, pp. 123-140, 1984.
4. K. L. Barton and A. G. Alleyne, "A cross-coupled iterative learning control design for precision motion control," IEEE Trans. Control Syst. Technol., vol. 16, no. 6, pp. 1218-1231, Jun. 2008.
5. K. L. Barton and A. G. Alleyne, "Norm optimal ilc with time-varying weighting matrices," in Proc. Amer. Control Conf., Saint Louis, MO, USA, Jun. 2009, pp. 264-270.
6. S. Bittani and P. Colaneri, "Invariant representations of discrete-time periodic systems," Automatica, vol. 36, pp. 1777-1793, 2000.
7. S. Bittani and P. Colaneri, Periodic Systems: Filtering and Control. London, U. K.: Springer-Verlag, 2009.
8. A. Böttcher, S. Grudsky, and J. Unterberger, "Asymptotic pseudomodes of Toeplitz matrices," Oper. Matrices, vol. 2, no. 4, pp. 525-541, 2008.
9. D. A. Bristow, M. Tharayil, and A. G. Alleyne, "A survey of iterative learning control," IEEE Control Syst. Mag., vol. 26, no. 3, pp. 96-114, 2006.
10. J. A. Butterworth, L. Y. Pao, andD. Y. Abramovitch, "A comparison of ILC architectures for nanopositioners with applications to AFM raster tracking," in Proc. Amer. Control Conf., San Francisco,CA,USA, Jun. / Jul. 2011, pp. 2266-2271.
11. K. K. Chew and M. Tomizuka, "Digital control of repetitive errors in disc drive systems," IEEE Control Syst. Mag., vol. 10, no. 1, pp. 16-20, 1990. (Pubitemid 20666417)
12. K. K. Chew and M. Tomizuka, "Digital control of repetitive errors in disk drive systems," in Proc. Amer. Control Conf., 1999, pp. 540-548.
13. C. L. van Oosten, O. H. Bosgra, and B. G. Dijkstra, "Reducing residual vibrations through iterative learning control, with application to a wafer stage," in Proc. Amer. Control Conf., Boston, MA, USA, Jun. /Jul. 2004, pp. 5150-5155.
14. L. Cuiyan, Z. Dongchun, and Z. Xianyi, "A survey of repetitive control," in Proc. IEEE/RSJ lnt. Conf. Intell. Robots Syst., Sendai, Japan, Sep. /Oct. 2004, pp. 1160-1166. (Pubitemid 40275756)
15. D. De Roover, "Synthesis of a robust iterative learning controller using an approach," in Proc. 35th IEEE Conf. Decision Control, 1996, pp. 3044-3049.
16. D. De Roover, O. H. Bosgra, and M. Steinbuch, "Internal-model-based design of repetitive and iterative learning controllers for linear multivariable systems," Int. J. Control, vol. 73, no. 10, pp. 914-929, 2000. (Pubitemid 35395404)
17. T. Y. Doh, J. R. Ryoo, and M. J. Chung, "Design of a repetitive controller: An application to the track-following servo system of optical disk drives," Proc. Inst. Elect. Eng., vol. 153, no. 3, pp. 323-330, 2006.
18. J. Edwards, "Stability problems in the control of multipass processes," Proc. Inst. Elect. Eng., vol. 121, no. 11, pp. 1425-1432, 1974.
19. J. Edwards and J. Greenberg, "Longitudinal interaction in multipass processes," Proc. Inst. Elect. Eng., vol. 124, no. 4, pp. 385-392, 1977.
20. B. A. Francis and W. M. Wonham, "The internal model principle of control theory," Automatica, vol. 12, no. 5, pp. 457-465, 1976.
21. C. T. Freeman, "Constrained point-to-point iterative learning control with experimental verification," Control Eng. Practice, vol. 20, no. 5, pp. 489-498, 2012.
22. D. Gorinevski, "Loop shaping for iterative control of batch processes," IEEE Control Syst. Mag., vol. 22, no. 6, pp. 55-65, 2002.
23. R. M. Gray, "Toeplitz and circulant matrices: A review.," Foundations and Trends in Communications and Information Theory, vol. 2, no. 3, pp. 155-239.
24. U. Grenander and G. Szegö, Toeplitz Forms and Their Applications. New York, USA: Chelsea, 1984.
25. S. Gunnarsson and M. Norrlof, "On the design of ilc algorithms using optimization," Automatica, vol. 37, no. 2, pp. 217-224, 2001.
26. S. Hara, Y. Yamamoto, T. Omata, and M. Nakano, "Repetitive control system: A new type of servo system for periodic exogenous signals," IEEE Trans. Autom. Control, vol. 33, no. 7, pp. 695-668, 1988.
27. M. Heertjes and T. Tso, "Nonlinear iterative learning control with applications to lithographic machinery," Control Eng. Practice, vol. 15, pp. 1545-1555, 2007. (Pubitemid 47488044)
28. T. Inoue, "Practical repetitive control system design," in Proc. 29th IEEE Conf. Decision Control, Honolulu, HI, Dec. 1990, pp. 1673-1678. (Pubitemid 21691230)
29. T. Inoue, M. Nakano, and S. Iwai, "High accuracy control of a proton synchrotron magnet power supply," in Proc. 8th IFACWorld Congress, Part 3, 1981, pp. 3137-3142.
30. D. H. Kim and T. C. Tsao, "Robust performance control of electrohydraulic actuators for electronic cam motion generation," IEEE Trans. Control Syst. Technol., vol. 8, no. 2, pp. 220-227, 2000.
31. H. Körolu and O. Morgül, "Time-varying repetitive control for better transient response and stochastic behaviour," Electron. Lett., vol. 37, no. 17, pp. 1101-1102, 2001. (Pubitemid 32839371)
32. R. Kulawinek, K. Galkowski, L. Grzesiak, and A. Kummert, "Iterative learning control method for a single-phase inverter with sinusoidal output voltage," in Proc. 37th Annu. Conf. IEEE Ind. Electron. Soc. (IECON'11), Melbourne, Australia, Nov. 2011, pp. 1402-1407.
33. K. Lee, S. Bang, and K. Chang, "Feedback-assisted iterative learning control based on an inverse process model," J. Process Control, vol. 4, no. 2, pp. 77-89, 1994.
34. J. Li and T. C. Tsao, "Rejection of repeatable and non-repeatable disturbances for disk drive actuators," in Proc. Amer. Control Conf., San Diego, CA, Jun. 1999, pp. 3615-3619. (Pubitemid 32079435)
35. R. W. Longman, "Iterative learning control and repetitive control for engineering practice," Int. J. Control, vol. 73, no. 10, pp. 930-954, 2000. (Pubitemid 35401412)
36. A. Luo, X. Xu, L. Fang, H. Fang, J. Wu, and C. Wu, "Feedback- feedforward PI-type iterative learning control strategy for hybrid active power filter with injectio circuit," IEEE Trans. Ind. Electron., vol. 57, no. 11, pp. 3767-3779, Nov. 2010.
37. M. Mezghani, G. Roux, M. Cabassud, M. Le Lann, B. Dahhou, and G. Casamatta, "Application of iterative learning control to an exothermic semibatch chemical reactor," IEEE Trans. Control Syst. Technol., vol. 10, no. 6, pp. 822-834, 2002. (Pubitemid 35428605)
38. K. Moore, "Multi-loop control approach to designing iterative learning controllers," in Proc. 37th IEEE Conf. Decision Control, Tampa, FL, USA, Dec. 1998, pp. 666-671.
39. K. Moore, "A matrix-fraction approach to higher-order iterative learning control: 2-D dynamics through repetition-domain filtering," in Proc. 2nd Int. Workshop Multidimensional (nD) Syst., Lower Selesia, Poland, Jun. 2000, pp. 99-104.
40. K. L. Moore, Iterative Learning Control for Deterministic Systems. London, U. K.: Springer-Verlag, 1993.
41. M. Mukhtar and G. T. C. Chiu, "Iterative learning based repetitive disturbance rejection with application to color registration error reduction in flatbed document scanners," in Proc. IEEE/ASME Int. Conf. Adv. Intell. Mechatron., Singapore, Jul. 2009, pp. 1330-1335.
42. M. Norrlof, "An adaptive iterative learning control algorithm with experiments on an industrial robot," IEEE Trans. Robot. Autom., vol. 18, no. 2, pp. 245-251, 2002. (Pubitemid 34659028)
43. A. Packard and J. Doyle, "The complex structured singular value," Automatica, vol. 29, no. 1, pp. 71-109, 1993.
44. T. E. Peery and H. Özbay, " optimal repetitive controller design for stable plants," Trans. ASME: J. Dyn. Syst.,Meas., Control, vol. 119, no. 3, pp. 541-547, 1997. (Pubitemid 127681189)
45. G. Pipeleers, B. Demeulenaere, and J. Swevers", Optimal Linear Controller Design for Periodic Inputs. London, U. K.: Springer-Verlag, 2009.
46. J. K. Rice andM. Verhaegen, "A structuredmatrix approach to efficient calculation of lqg repetitive learning controllers in the liftes setting," Int. J. Control, vol. 83, no. 6, pp. 1265-1276, 2010.
47. E. Rogers, D. Owens, and K. Galkowski, "Control systems theory and applications for linear repetitive processes," in, ser. Number 349 in Lecture Notes in Control and Information Science. Berlin, Germany: Springer-Verlag, 2007.
48. S. S. Saab, "A stochastic iterative learning control algorithm with application to an induction motor," Int. J. Control, vol. 77, no. 2, pp. 144-163, 2004.
49. A. Saberi, A. A. Stoorvogel, and P. Sannuti", Control of Linear Systems with Regulation and Input Contraints. London, U. K.: Springer-Verlag, 2000.
50. M. Steinbuch, K. van Berkel, G. Leenknegt, T. Oomen, and J. van de Wijdeven, "Reading of cracked optical discs using iterative learning control," in Proc. Amer. Control Conf., Saint Louis, MO, USA, Jun. 2009, pp. 258-263.
51. M. Tomizuka, T. C. Tsao, and K. K. Chew, "Analysis and synthesis of discrete-time repetitive controllers," Trans. ASME: J. Dyn. Syst., Meas., Control, vol. 111, pp. 353-358, 1989.
52. J. J. M. van de Wijdeven and O. H. Bosgra, "Residual vibration suppression using hankel iterative learning control," Int. J. Robust Nonlin. Control, vol. 18, no. 10, pp. 1034-1051, 2008.
53. J. J. M. van de Wijdeven, T. Donkers, and O. H. Bosgra, "Iterative learning control for uncertain systems: Robust monotonic convergence analysis," Automatica, vol. 45, pp. 2383-2391, 2009.
54. M. Volckaert, "Nonlinear Iterative Learning Control Through Dynamic Optimization," Ph. D. dissertation, Katholieke Universiteit Leuven, Leuven, Belgium, 2012.
55. Y. Wang, D. Wang, B. Zhang, and Y. Ye, "From iterative learning control to robust repetitive learning control," in Proc. IEEE/ASME Int. Conf. Adv. Intell. Mechatron., Monterey, CA, USA, Jul. 2005, pp. 24-28.
56. W. B. J. Hakvoort, R. G. K. M. Aarts, J. van Dijk, and J. B. Jonker, "Lifted system iterative learning control applied to an industrial robot," Control Eng. Practice, vol. 16, pp. 377-391, 2008. (Pubitemid 351147098)
57. W. B. J. Hakvoort, R. G. K. M. Aarts, J. van Dijk, and J. B. Jonker, "A computationally efficient algorithm of iterative learning control for discrete-time linear time-varying systems," Automatica, vol. 45, pp. 2925-2929, 2009.
58. Q. Wu and M. Saif, "Repetitive learning observer based actuator fault detection, isolation, estimation with application to a satellite attitude control system," in Proc. Amer. Control Conf., New York, NY, Jul. 2007, pp. 251-256.
59. Y. Shan and K. K. Leang, "Accounting for hysteresis in repetitive control design: Nanopositioning example," Automatica, vol. 48, pp. 1751-1758, 2012.
60. X. Zhang, T. Shinshi, L. Li, and A. Shimokohbe, "A combined repetitive control for precision rotation ofmagnetic bearing," Precision Eng., vol. 27, no. 3, pp. 273-282, 2003.