Design of dielectric/metal/dielectric transparent electrodes for flexible electronics

Journal of Photonics for Energy

Volumn 2, Issue 1, 2012, Pages

  Kim, Sungjun ^a   Lee, Jong Lam ^a  

^a Pohang University of Science and Technology (POSTECH)   (South Korea)

Author keywords

Design; Dielectric metal dielectric; Flexible transparent electrode; Indium tin oxide alternatives; Resonant cavity

Indexed keywords

CANDIDATE MATERIALS; HIGH-SHEET-RESISTANCE; INDIUM TIN OXIDE; MECHANICAL FLEXIBILITY; MICROCAVITY EFFECTS; OPTICAL TRANSPARENCY; SOLID STATE LIGHTING; TRANSPARENT ELECTRODE;

CAVITY RESONATORS; DESIGN; DISPLAY DEVICES; FLEXIBLE DISPLAYS; OPTOELECTRONIC DEVICES; SHEET RESISTANCE; TIN OXIDES;

ELECTRODES;

EID: 84896692830     PISSN: None     EISSN: 19477988     Source Type: Journal    
DOI: 10.1117/1.JPE.2.021215     Document Type: Article

References (109)

1. Y. Fu et al., "TCO-Free, flexible, and bifacial dye-sensitized solar cell based on low cost metal wires", Adv. Energy Mater. 2(1), 37-41(2012), http://dx.doi.org/10.1002/aenm.201100545.
2. C. E. Small et al., "High-efficiency inverted dithienogermole- thienopyrrolodione-based polymer solar cells", Nat. Photonics 6(2), 115-120(2012), http://dx.doi.org/10.1038/nphoton. 2011.317.
3. H. Park et al., "Graphene as transparent conducting electrodes in organic photovoltaic: studies in graphene morphology, hole transporting layers, and counter electrodes", Nano Lett. 12(1), 133-140(2012), http://dx.doi.org/10.1021/nl2029859.
4. P. Guaino et al., "Large white organic light-emitting diode lighting panel on metal foils", J. Photonics Energy 1(1), 011015(2011), http://dx.doi.org/10.1117/1.3551511.
5. S. Y. Kim et al., "Flexible organic light emitting diodes using metal peel-off method", IEEE Photon. Technol. Lett. 20(22), 1836-1838(2008), http://dx.doi.org/10.1109/LPT.2008.2004693.
6. R. Capelli et al., "Organic light-emitting transistors with an efficiency that outperforms the equivalent light-emitting diodes", Nat. Mater. 9(6), 496-503(2010), http://dx.doi.org/10.1038/nmat2751.
7. S. Reineke et al., "White organic light-emitting diodes with fluorescent tube efficiency", Nature 459(7244), 234-238(2009), http://dx.doi.org/10.1038/nature08003.
8. D. Joly et al., "White organic light-emitting diodes based on quench-resistant fluorescent organophosphorus dopants", Adv. Funct. Mater. 22(3), 567-576(2012), http://dx.doi.org/10.1002/adfm.201102005.
9. C. Feng et al., "Flexible, stretchable, transparent conducting films made from superaligned carbon nanotubes", Adv. Funct. Mater. 20(6), 885-891(2010), http://dx.doi.org/10.1002/adfm.200901960.
10. S. K. Park et al., "Deposition of indium-tin-oxide films on polymer substrates for application in plastic-based flat panel displays", Thin Solid Films 397(1-2), 49-55(2001), http://dx.doi.org/10.1016/S0040-6090 (01) 01489-4. (Pubitemid 32975721)
11. E. Wrzesniewski et al., "Transparent oxide/metal/oxide trilayer electrode for use in top-emitting organic light-emitting diodes", J. Photonics Energy 1(1), 011023(2011), http://dx.doi.org/10.1117/1.3592886.
12. J. Meyer et al., "Transparent inverted organic light-emitting diodes with a tungsten oxide buffer layer", Adv. Mater. 20(20), 3839-3843(2008), http://dx.doi.org/10.1002/adma.v20:20.
13. F. So and D. Kondakov, "Degradation mechanisms in small-molecule and polymer organic light-emitting diodes", Adv. Mater. 22(34), 3762-3777(2010), http://dx.doi.org/10.1002/adma.200902624.
14. G. B. Murdoch et al., "Aluminum doped zinc oxide for organic photovoltaics", Appl. Phys. Lett. 94(21), 213301(2009), http://dx.doi.org/10.1063/1.3142423.
15. X.-T. Hao et al., "High-performance low-temperature transparent conducting aluminum-doped ZnO thin films and applications", J. Cryst. Growth 287(1), 44-47(2006), http://dx.doi.org/10.1016/j.jcrysgro.2005.10.040. (Pubitemid 43038824)
16. A. Kumar and C. Zhou, "The race to replace tin-doped indium oxide: which material will win?", ACS Nano 4(1), 11-14(2010), http://dx.doi.org/ 10.1021/nn901903b.
17. J.-Y. Lee et al., "Solution-processed metal nanowire mesh transparent electrodes", Nano Lett. 8(2), 689-692(2008), http://dx.doi.org/10.1021/nl073296g. (Pubitemid 351346040)
18. C. Zhong et al., "Materials and devices toward fully solution processable organic light-emitting diodes", Chem. Mater. 23(3), 326-340(2011), http://dx.doi.org/10.1021/cm101937p.
19. G. L. Allen et al., "Small particle melting of pure metals", Thin Solid Films 144(2), 297-308(1986), http://dx.doi.org/10.1016/0040-6090 (86) 90422-0. (Pubitemid 17497011)
20. M. Zhang et al., "Size-dependent melting point depression of nanostructures: nanocalori-metric measurements", Phys. Rev. B 62(15), 10548-10557(2000), http://dx.doi.org/10.1103/PhysRevB.62.10548. (Pubitemid 32332519)
21. X.-Y. Zeng et al., "A new transparent conductor: silver nanowire film buried at the surface of a transparent polymer", Adv. Mater. 22(40), 4484-4488(2010), http://dx.doi.org/10.1002/adma.v22:40.
22. S. L. Hellstrom, H. W. Lee, and Z. Bao, "Polymer-assisted direct deposition of uniform carbon nanotube bundle networks for high performance transparent electrodes", ACS Nano 3(6), 1423-1430(2009), http://dx.doi.org/10.1021/nn9002456.
23. P. J. King et al., "Percolation effects in supercapacitors with thin, transparent carbon nanotube electrodes", ACS Nano 6(2), 1732-1741(2012), http://dx.doi.org/10.1021/nn9002456.
24. S. Pang et al., "Graphene as transparent electrode material for organic electronics", Adv. Mater. 23(25), 2779-2795(2011), http://dx.doi.org/10.1002/adma.201100304.
25. J. O. Hwang et al., "Workfunction-tunable, N-doped reduced graphene transparent electrodes for high-performance polymer light-emitting diodes", ACS Nano 6(1), 159-167(2012), http://dx.doi.org/10.1021/nn203176u.
26. K. Choi et al., "Reduced graphite oxide-indium tin oxide hybrid materials or use as a transparent electrode", J. Electrochem. Soc. 158(8), J231-J235(2011), http://dx.doi.org/10.1149/1.3593044.
27. H. Pang et al., "ZnS/Ag/ZnS coating as transparent anode for organic light emitting diodes", J. Lumin. 112-123, 587-589(2007), http://dx.doi.org/10.1016/j.jlumin. 2006.01.232. (Pubitemid 44737711)
28. H. A. Macleod, Thin-Film Optical Filters, Taylor & Francis, London & New York (2001).
29. M. Bender et al., "Dependence of film composition and thicknesses on optical and electrical properties of ITO-metal-ITO multilayers", Thin Solid Films 326(1-2), 67-71(1998), http://dx.doi.org/10.1016/S0040-6090 (98) 00520-3. (Pubitemid 128417244)
30. H. Cho, J.-M. Choi, and S. Yoo, "Highly transparent organic light-emitting diodes with a metallic top electrode: the dual role of a Cs2CO3 layer", Opt. Express 19(2), 1113-1121(2011), http://dx.doi.org/10.1364/OE. 19.001113.
31. X. Liu et al., "ZnS/Ag/ZnS nano-multilayer films for transparent electrodes in flat display application", Appl. Surf. Sci. 183(1-2), 103-110(2001), http://dx.doi.org/10.1016/S0169-4332 (01) 00570-0. (Pubitemid 33039310)
32. J. Lewis et al., "Highly flexible transparent electrodes for organic light-emitting diode-based displays" Appl. Phys. Lett. 85(16), 3450-3452(2004), http://dx.doi.org/10.1063/1.1806559.
33. F. Li et al., "Semitransparent inverted polymer solar cells using MoO3/Ag/WO3 as highly transparent anodes", Sol. Energy Mater. Sol. Cells 95(3), 877-880(2011), http://dx.doi.org/10.1016/j.solmat.2010.11.009.
34. K. S. Yook et al., "Transparent organic light emitting diodes using a multilayer oxide as a low resistance transparent cathode", Appl. Phys. Lett. 93(1), 013301(2008), http://dx.doi.org/10.1063/1.2955528.
35. S. Y Ryu et al., "Transparent organic light-emitting diodes consisting of a metal oxide multilayer cathode", Appl. Phys. Lett. 92(2), 023306(2008), http://dx.doi.org/10.1063/1.2835044.
36. W. Ji et al., "High-color-rendering flexible top-emitting warm-white organic light emitting diode with a transparent multilayer cathode", Org. Electron. 12(7), 1137-1141(2011), http://dx.doi.org/10.1016/j.orgel.2011.03.042.
37. H. Cho, C. Yun, and S. Yoo, "Multilayer transparent electrode for organic light-emitting diodes: tuning its optical characteristics", Opt. Express 18(4), 3404-3414(2010), http://dx.doi.org/10.1364/OE.18.003404.
38. S. Kim et al., "Hole injection layer of thermally evaporated copper oxide for top emitting organic light emitting diodes", J. Electrochem. Soc. 157(10), J347-J350(2010), http://dx.doi.org/10.1149/1.3476308.
39. S. Kim et al., "Phase-controllable copper oxides for efficient anode interfacial layer in organic light-emitting diodes", J. Mater. Chem. 22(5), 2039-2044(2012), http://dx.doi.org/10.1039/c1jm14218f.
40. S. Y Kim, K. Hong, and J.-L. Lee, "The change of interface dipole energy with interfacial layer thickness and O2 plasma treatment in metal/organic interface", Appl. Phys. Lett. 90(18), 183508(2007), http://dx.doi.org/10. 1063/1.2734916.
41. K. Hong et al., "Optical properties of WO3/Ag/WO3 multilayer as transparent cathode in top-emitting organic light emitting diodes", J. Phys. Chem. C 115(8), 3453-3459(2011), http://dx.doi.org/10.1021/jp109943b.
42. G. H. Jung et al., "BCP/Ag/MoO3 transparent cathodes for organic photovoltaics", Adv. Energy Mater. 1(6), 1023-1028(2011), http://dx.doi.org/10.1002/aenm.201100411.
43. H. Cho et al., "Highly flexible organic light-emitting diodes based on ZnS/Ag/WO3 multilayer transparent electrodes", Org. Electron. 10(6), 1163-1169(2009), http://dx.doi.org/10.1016/j.orgel.2009.06.004.
44. Z. B. Wang et al., "Unlocking the full potential of organic light-emitting diodes on flexible plastic", Nat. Photonics 5(12), 753-757(2011), http://dx.doi.org/10.1038/nphoton. 2011.259.
45. N. P. Sergeant et al., "Design of transparent anodes for resonant cavity enhanced light harvesting in organic solar cells", Adv. Mater. 24(6), 728-732(2012), http://dx.doi.org/10.1002/adma.201104273.
46. Y. Jin et al., "Solving efficiency-stability tradeoff in top-emitting organic light-emitting devices by employing periodically corrugated metallic cathode", Adv. Mater. 24(9), 1187-1191(2012), http://dx.doi.org/10.1002/adma.201103397.
47. C. Guillén and J. Herrero, "ITO/metal/ITO multilayer structures based on Ag and Cu metal films for high-performance transparent electrodes", Sol. Ener. Mat. Sol. Cells 92(8), 938-941(2008), http://dx.doi.org/10.1016/j.solmat.2008.02.038.
48. L. Young, "Prediction of absorption loss in multilayer interference filters", J. Opt. Soc. Am. 52(7), 753-760(1962), http://dx.doi.org/10.1364/ JOSA.52.000753.
49. M. Fox et al., Optical Properties of Solids, Oxford University Press, Inc., New York (2001).
50. H. Köstlin and G. Frank, "Optimization of transparent heat mirrors based on a thin silver film between antireflection films", Thin Solid Films 89(3), 287-293(1982), http://dx.doi.org/10.1016/0040-6090 (82) 90601-0.
51. K. Hong and J.-L. Lee, "Inverted top-emitting organic light-emitting diodes using transparent silver oxide anode formed by oxygen plasma", Electrochem. Solid-State Lett. 11(2), H29-H31(2008), http://dx.doi.org/10.1149/ 1.2817479.
52. H. A. Atwater and A. Polman, "Plasmonics for improved photovoltaic devices", Nat. Mater. 9(3), 205-213(2010), http://dx.doi.org/10.1038/ nmat2629.
53. W. L. Barnes et al., "Surface plasmon polaritons and their role in the enhanced transmission of light through periodic arrays of subwavelength holes in a metal film", Phys. Rev. Lett. 92(10), 107401(2004), http://dx.doi.org/10.1103/PhysRevLett.92.107401.
54. S. Wedge, A. Giannattasio, and W. L. Barnes, "Surface plasmon-polariton mediated emission of light from top-emitting organic light-emitting diode type structures", Org. Electron. 8(2-3), 136-147(2007), http://dx.doi.org/10.1016/j.orgel.2006.07.003. (Pubitemid 46386509)
55. J. A. Schuller et al., "Plasmonics for extreme light concentration and manipulation", Nat. Mater. 9(3), 193-204(2010), http://dx.doi.org/10. 1038/nmat2630.
56. K. Hong and J.-L. Lee, "Review paper: recent developments in light extraction technologies of organic light emitting diodes", Electron. Mater. Lett. 7(2), 77-91(2011), http://dx.doi.org/10.1007/s13391-011-0601-1.
57. X. Liu et al., "The design of ZnS/Ag/ZnS transparent conductive multilayer films", Thin Solid Films 441(1-2), 200-206(2003), http://dx.doi.org/10.1016/S0040-6090 (03) 00141-X.
58. H. M. Liddell, Computer-Aided Techniques for the Design of Multilayer Filters, Adam Hilger Ltd., Bristol (1981).
59. J. M. Siqueiros, L. E. Regalado, and R. Machorro, "Determination of (n, k) for absorbing thin films using reflectance measurements", Appl. Opt. 27(20), 4260-4264(1988), http://dx.doi.org/10.1364/AO.27.004260.
60. H. Köstlin and G. Frank, "Optimization of transparent heat mirrors based on a thin silver film between antireflection films", Thin Solid Films 89(3), 287-293(1982), http://dx.doi.org/10.1016/0040-6090 (82) 90601-0.
61. C.-C. Lee, S.-H. Chen, and C.-C. Jaing, "Optical monitoring of silver-based transparent heat mirrors", Appl. Opt. 35(28), 5698-5703(1996), http://dx.doi.org/10.1364/AO.35.005698. (Pubitemid 126627822)
62. A. S. Walton et al., "Four-probe electrical transport measurements on individual metallic nanowires", Nanotechnology 18(6), 065204(2007), http://dx.doi.org/10.1088/0957-4484/18/6/065204.
63. R. A. Serway et al., Principles of Physics, pp. 602, Saunders College Pub, London (1998).
64. D. Graiffiths, "Electrodynamics", Chapter 7, in Introduction to Electrodynamics, pp. 286, Prentice Hall, NJ (1999).
65. G. Leftheriotis, P. Yianoulis, and D. Patrikios, "Deposition and optical properties of optimized ZnS/Ag/ZnS thin films for energy saving applications", Thin Solid Films 306(1), 92-99(1997), http://dx.doi.org/10. 1016/S0040-6090 (97) 00250-2. (Pubitemid 127399369)
66. R. S. Sennett and G. D. Scott, "The structure of evaporated metal films and their optical properties", J. Opt. Soc. Am. 40(4), 203-210(1950), http://dx.doi.org/10.1364/JOSA.40.000203.
67. S. Kim et al., "Cu-based multilayer transparent electrodes: a low-cost alternative to ITO electrodes in organic solar cells", Sol. Energy Mat. Sol. Cells 101, 170-175(2012), http://dx.doi.org/10.1016/j.solmat.2012.01. 016.
68. X. Zhou et al., "Very-low-operating-voltage organic light-emitting diodes using a p-doped amorphous hole injection layer", Appl. Phys. Lett. 78(4), 410-412(2001), http://dx.doi.org/10.1063/1.1343849. (Pubitemid 33629914)
69. D.-D. Zhang et al., "Enhanced hole injection in organic light-emitting devices by using Fe3O4 as an anodic buffer layer", Appl. Phys. Lett. 94(22), 223306(2009), http://dx.doi.org/10.1063/1.3148657.
70. G. H. Jung et al., "Morphological and electrical effect of an ultrathin iridium oxide hole extraction layer in P3HT:PCBM bulk-heterojunction solar cells", Sol. Energy Mat. Sol. Cells 95(4), 1146(2011), http://dx.doi.org/10.1016/j.solmat.2010.12.039.
71. K. Hong et al., "Enhancement of electroluminescence properties in organic light emitting diodes on polyethylene terephthalate with ruthenium-oxide-coated anode and Mg-Al alloy cathode", J. Electrochem. Soc. 154(9), H782-H788(2007), http://dx.doi.org/10.1149/1.2752982. (Pubitemid 47186582)
72. J. Hwang, A. Wan, and A. Kahn, "Energetics of metal-organic interfaces: new experiments and assessment of the field", Mater. Sci. Eng., R 64(1-2), 1-31(2009), http://dx.doi.org/10.1016/j.mser.2008.12.001.
73. S. Braun, W. R. Salaneck, and M. Fahlman, "Energy-level alignment at organic/metal and organic/organic interfaces", Adv. Mater. 21(14-15), 1450-1472(2009), http://dx.doi.org/10.1002/adma.v21:14/15.
74. M. Vasilopoulou et al., "Reduction of tungsten oxide: a path towards dual functionality utilization for efficient anode and cathode interfacial layers in organic light-emitting diodes", Adv. Funct. Mater. 21(8), 1489-1497(2011), http://dx.doi.org/10.1002/adfm.v21.8.
75. H. Irfan et al., "Energy level evolution of molybdenum trioxide interlayer between indium tin oxide and organic semiconductor", Appl. Phys. Lett. 96(7), 073304(2010), http://dx.doi.org/10.1063/1.3309600.
76. J. Subbiah et al., "MoO3/poly (9, 9-dioctylfluorene-co-N-[4-(3- methylpropyl)]-diphenylamine) double-interlayer effect on polymer solar cells", Appl. Phys. Lett. 96(6), 063303(2010), http://dx.doi.org/10.1063/1. 3310013.
77. M. T. Greiner et al., "Universal energy-level alignment of molecules on metal oxides", Nat. Mater. 11(1), 76-81(2011), http://dx.doi.org/10. 1038/nmat3159.
78. N. D. Lang and W. Kohn, "Theory of metal surfaces: induced surface charge and image potential", Phys. Rev. B 7(8), 3541-3550(1973), http://dx.doi.org/10.1103/PhysRevB.7.3541.
79. Z. Qiao, R. Latz, and D. Mergei, "Thickness dependence of In2O3: Sn film growth", Thin Solid Films 466(1-2), 250-258(2004), http://dx.doi.org/10.1016/j.tsf.2004.02.094.
80. S. Y. Kim and J.-L. Lee, "Effect of interfacial layer thickness on the formation of interface dipole in metal/tris (8-hydroxyquinoline) aluminum interface", Org. Electron. 9(5), 678-686(2008), http://dx.doi.org/10.1016/ j.orgel.2008.04.010.
81. X. Crispin et al., "Characterization of the interface dipole at organic/metal interface", J. Am. Chem. Soc. 124(27), 8131-8141(2002), http://dx.doi.org/10.1021/ja025673r.
82. K. Hong et al., "Metal-diffusion-induced interface dipole: correlating metal oxide-organic chemical interaction and interface electronic states", J. Phys. Chem. C 115(46), 23107-23112(2011), http://dx.doi.org/10. 1021/jp2057783.
83. K. H. Yoon et al., "Structural and photocurrent-voltage characteristics of tungsten oxide thin films on p-GaAs", Appl. Phys. Lett. 68(4), 572-574(1996), http://dx.doi.org/10.1063/1.116786. (Pubitemid 126684440)
84. S. Han et al., "Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes", Org. Electron. 10(5), 791-797(2009), http://dx.doi.org/10.1016/j. orgel.2009.03.016.
85. S. Y. Ryu et al., "Transparent organic light-emitting diodes using resonant tunneling double barrier structures", Appl. Phys. Lett. 91(9), 093515(2007), http://dx.doi.org/10.1063/1.2776347.
86. S. Y Kim and J.-L. Lee, "In situ determination of interface dipole energy in organic light emitting diodes with iridium interfacial layer using synchrotron radiation photoemission spectroscopy", Appl. Phys. Lett. 89(22), 223515(2006), http://dx.doi.org/10.1063/1.2398901.
87. K. Hong et al., "In situ analysis of hole injection barrier of molybdenum-oxide-coated anode with organic materials using synchrotron radiation photoemission spectroscopy", J. Electrochem. Soc. 156(8), H648-H653(2009), http://dx.doi.org/10.1149/1.3148857.
88. S. Y. Kim, "Enhancement of physical properties of indium tin oxide deposited by super density arc plasma ion plating by O2 plasma treatment", Solid-State Electron. 52(1), 1-6(2008), http://dx.doi.org/10.1016/j.sse.2007.07. 037. (Pubitemid 350148204)
89. C. C. Lee, S. H. Chen, and C. C. Jaing, "Optical monitoring of silver-based transparent heat mirrors", Appl. Opt. 35(28), 5698(1996), http://dx.doi.org/10.1364/AO.35.005698.
90. D. R. Sahu, S.-Y. Lin, and J.-L. Huang, "ZnO/Ag/ZnO multilayer films for the application of a very low resistance transparent electrode", Appl. Surf. Sci. 252(20), 7509(2006), http://dx.doi.org/10.1016/j.apsusc.2005.09.021.
91. C.-H. Cheng and J.-M. Ting, "Transparent conducting GZO, Pt/GZO, and GZO/Pt/GZO thin films", Thin Solid Films 516(2-4), 203(2007), http://dx.doi.org/10.1016/j.tsf.2007.05.051.
92. J. Zhou, Z. Wu, and Z. Liu, "Optical and electrical properties of TiO2/Au/TiO2 multilayer coatings in large area deposition at room temperature", Rare Met. 27(5), 457-462(2008), http://dx.doi.org/10.1016/ S1001-0521 (08) 60162-X.
93. Y.-S. Park, K.-H. Choi, and H.-K. Kim, "Room temperature flexible and transparent ITO/Ag/ITO electrode grown on flexile PES substrate by continuous roll-to-roll sputtering for flexible organic photovoltaics", J. Phys. D: Appl. Phys. 42(23), 235109(2009), http://dx.doi.org/10.1088/0022-3727/ 42/23/235109.
94. H. Peng et al., "High-efficiency microcavity top-emitting organic light-emitting diodes using silver anode", Appl. Phys. Lett. 88(7), 073517(2006), http://dx.doi.org/10.1063/1.2172734.
95. J. Lee et al., "Down-conversion white organic light-emitting diodes using microcavity structure" Adv. Energy Mater. 1(2), 174-178(2011), http://dx.doi.org/10.1002/aenm.201000014.
96. J. Meiss, M. K. Riede, and K. Leo, "Towards efficient tin-doped indium oxide (ITO)-free inverted organic solar cells using metal cathodes", Appl. Phys. Lett. 94(1), 013303(2009), http://dx.doi.org/10.1063/1.3059552.
97. M. Thomschke et al., "Optimized efficiency and angular emission characteristics of white top-emitting organic electroluminescent diodes", Appl. Phys. Lett. 94(8), 083303(2009), http://dx.doi.org/10.1063/1.3088854.
98. D. S. Setz et al., "Comprehensive efficiency analysis of organic light-emitting devices", J. Photonics Energy 1(1), 011006(2011), http://dx.doi.org/10.1117/1.3528274.
99. R. Krause et al., "Cheap p- and n-doping for highly efficient organic devices", J. Photonics Energy 1(1), 011022(2011), http://dx.doi.org/10.1117/1.3583639.
100. J. H. Son, H. K. Yu, and J.-L. Lee, "MgO nano-pyramids structure for enhancement of light extraction efficiency in vertical light emitting diodes", Opt. Express 18(S3), A403-A410(2010), http://dx.doi.org/10.1364/ OE.18.00A403.
101. Y. Sun and S. R. Forrest, "Enhanced light out-coupling of organic light-emitting devices using embedded low-index grids", Nat. Photonics 2(8), 483-487(2008), http://dx.doi.org/10.1038/nphoton. 2008.132.
102. M. Cui, H. P. Urbach, and D. K. G. De Boer, "Optimization of light extraction from OLEDs", Opt. Express 15(8), 4398-4409(2007), http://dx.doi.org/10.1364/OE.15.004398. (Pubitemid 46608988)
103. S. Kim et al., "MgO nano-facet embedded silver-based dielectric/metal/dielectric transparent electrode", Opt. Express 20(2), 845-853(2012), http://dx.doi.org/10.1364/OE.20.000845.
104. J. Goniakowski, F. Finocchi, and C. Noguera, "Polarity of oxide surfaces and nanostruc-tures", Rep. Prog. Phys. 71(1), 016501(2008), http://dx.doi.org/10.1088/0034-4885/71/1/016501.
105. K. Hong et al., "Enhanced light out-coupling of organic light-emitting diodes: spontaneously formed nanofacet-structured MgO as a refractive index modulation layer", Adv. Mater. 22(43), 4890-4894(2010), http://dx.doi.org/10.1002/adma.201002028.
106. P. A. Hobson et al., "Surface plasmon mediated emission from organic light-emitting diodes", Adv. Mater. 14(19), 1393-1396(2002), http://dx.doi.org/10.1002/1521-4095 (20021002) 14:19<1393::AID-ADMA1393>3. 0. CO;2-B. (Pubitemid 35262805)
107. J. Frischeisen et al., "Strategies for light extraction from surface plasmons in organic light-emitting diodes", J. Photonics Energy 1(1), 011004(2011), http://dx.doi.org/10.1117/1.3523314.
108. J. A. Pracchia and J. M. Simon, "Transparent heat mirrors: influence of the materials on the optical characteristics", Appl. Opt. 20(2), 251(1981), http://dx.doi.org/10.1364/AO.20.000251.
109. K. Leo, "Efficient and flexible solution", Nat. Photonics 5(12), 716-718(2011), http://dx.doi.org/10.1038/nphoton. 2011.288.