Chemomechanics of ionically conductive ceramics for electrical energy conversion and storage

Journal of Electroceramics

Volumn 32, Issue 1, 2014, Pages 3-27

  Swallow, J G ^a   Woodford, W H ^a   Chen, Y ^a   Lu, Q ^a   Kim, J J ^a   Chen, D ^a   Chiang, Y M ^a   Carter, W C ^a   Yildiz, B ^a   Tuller, H L ^a   Van Vliet, K J ^a,b  

^a Massachusetts Institute of Technology Cambridge   (United States)

^b MASSACHUSETTS INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Batteries; Chemomechanics; Ionically conductive ceramics; Solid oxide fuel cells

Indexed keywords

CERAMIC MATERIALS; COMPUTER SIMULATION; DURABILITY; ELECTROCHEMISTRY; ENERGY CONVERSION; FUNCTIONAL MATERIALS; SOLAR CELLS; SOLID OXIDE FUEL CELLS (SOFC);

ATOMISTIC SIMULATIONS; CHEMO-MECHANICAL COUPLINGS; CHEMOMECHANICS; COMPUTATIONAL MODELING AND SIMULATION; CONDUCTIVE CERAMICS; ENERGY CONVERSION AND STORAGES; IN-SITU CHARACTERIZATION; THERMODYNAMIC EQUILIBRIA;

STORAGE (MATERIALS);

EID: 84896492174     PISSN: 13853449     EISSN: 15738663     Source Type: Journal    
DOI: 10.1007/s10832-013-9872-2     Document Type: Article

References (197)

1. A. Aguadero, L. Fawcett, S. Taub, R. Woolley, K.-T. Wu, N. Xu, J.A. Kilner, S.J. Skinner, Materials development for intermediate-temperature solid oxide electrochemical devices. J. Mater. Sci. 47(9), 3925-3948 (2012)
2. 3 - δ thin films. ACS Nano 7, 3276-3286 (2013)
3. D. Marrocchelli, S.R. Bishop, H.L. Tuller, B. Yildiz, Understanding chemical expansion in non-stoichiometric oxides: ceria and zirconia case studies. Adv. Funct. Mater. 22(9), 1958-1965 (2012)
4. H.L. Tuller, S.R. Bishop, D. Chen, Y. Kuru, J.-J. Kim, T.S. Stefanik, Praseodymium doped ceria: model mixed ionic electronic conductor with coupled electrical, optical, mechanical and chemical properties. Solid State Ionics 225, 194-197 (2012)
5. S.B. Adler, Factors governing oxygen reduction in solid oxide fuel cell cathodes. Chem. Rev. 104(10), 4791-4844 (2004)
6. 3-δ (x=0.35 and 0.5) mixed ionic-electronic conducting electrodes. J. Electrochem. Soc. 155(11), B1194-B1201 (2008)
7. K.L. Duncan, Y. Wang, S.R. Bishop, F. Ebrahimi, E.D. Wachsman, Role of point defects in the physical properties of fluorite oxides. J. Am. Ceram. Soc. 89(10), 3162-3166 (2006)
8. E.D. Wachsman, K.T. Lee, Lowering the temperature of solid oxide fuel cells. Sci. 334, 935-939 (2011)
9. T. Suzuki, Z. Hasan, Y. Funahashi, T. Yamaguchi, Y. Fujishiro, M. Awano, Impact of anode microstructure on solid oxide fuel cells. Sci. 325, 852-855 (2009)
10. W.H. Woodford, PhD thesis, Massachusetts Institute of Technology (2013)
11. H.L. Tuller, S.R. Bishop, Point defects in oxides: tailoring materials through defect engineering. Annu. Rev. Mater. Res. 41, 369-398 (2011)
12. B.C.H. Steele, A. Heinzel, Materials for fuel-cell technologies. Nature. 414, 345-352 (2001)
13. W.H. Woodford, Y.-M. Chiang, W.C. Carter, "Electrochemical shock" of intercalation electrodes: a fracture mechanics analysis. J Electrochem. Soc. 157, A1052 - A1059 (2010)
14. W.H. Woodford, W.C. Carter, Y.-M. Chiang, Design criteria for electrochemical shock resistant battery electrodes. Energy Environ. Sci. 5, 8014 (2012)
15. c bulk material. Appl. Phys. Lett. 51(8), 619-621 (1987)
16. D.B. Chrisey, G.K. Hubler (eds.), Pulsed Laser Deposition of Thin Films (Wiley, 1994)
17. T. Venkatesan, S.M. Green, Pulsed laser deposition: thin films in a flash. Am. Inst. Phys. 22-24 (1996)
18. 3 films on Si substrates. ACS Comb. Sci. 14(3), 179-190 (2012)
19. Y. Kuru, H. Jalili, Z. Cai, B. Yildiz, H.L. Tuller, Direct probing of nanodimensioned oxide multilayers with the aid of focused ion beam milling. Adv. Mater. 23(39), 4543-4548 (2011)
20. A. Ohtomo, D.A. Muller, J.L. Grazul, H.Y. Hwang, Artificial charge-modulation in atomic-scale perovskite titanate superlattices. Nat. 419, 378-380 (2002)
21. J. Chakhalian, J.W. Freeland, H.-U. Habermeier, G. Cristiani, G. Khaliullin, M. van Veenendaal, B. Keimer, Orbital reconstruction and covalent bonding at an oxide interface. Sci. 318, 1114-1117 (2007)
22. 3 interfaces. J. Appl. Phys. 110, 103903 (2011)
23. N. Balke, S. Jesse, Y. Kim, L. Adamczyk, I.N. Ivanov, N.J. Dudney, S.V. Kalinin, Decoupling electrochemical reaction and diffusion processes in ionically-conductive solids on the nanometer scale. ACS Nano 4(12), 7349-7357 (2010)
24. 3 heterostructures. Nano Lett. 12(4), 1765-1771 (2012)
25. A. Kumar, F. Ciucci, A.N. Morozovska, S.V. Kalinin, S. Jesse, Measuring oxygen reduction/evolution reactions on the nanoscale. Nat. Chem. 3(9), 707-713 (2011)
26. 4 interface. ACS Nano 4(5), 2811-2821 (2010)
27. Y. Chen, Z. Cai, Y. Kuru, W. Ma, H.L. Tuller, B. Yildiz, Electronic activation of cathode superlattices at elevated temperatures- source of markedly accelerated oxygen reduction kinetics. Adv. Energy Mater. 3, 1221-1229 (2013)
28. Y. Kuru, S.R. Bishop, J.J. Kim, B. Yildiz, H.L. Tuller, Chemomechanical properties and microstructural stability of nanocrystalline Pr-doped ceria: an in situ X-ray diffraction investigation. Solid State Ionics 193(1), 1-4 (2011)
29. 4 film electrode using a laser beam deflection method. Electrochim. Acta 51, 441-449 (2005)
30. 2 film electrode using a laser beam deflection method. Electrochim. Acta 49, 4477-4486 (2004)
31. V.A. Sethuraman, N. Van Winkle, D.P. Abraham, A.F. Bower, P.R. Guduru, Real-time stress measurements in lithium-ion battery negative-electrodes. J. Power Sources 206, 334-342 (2012)
32. Q. Yang, T.E. Burye, R.R. Lunt, J.D. Nicholas, In situ oxygen surface exchange coefficient measurements on lanthanum strontium ferrite thin films via the curvature relaxation method. Solid State Ionics 249-250, 123-128 (2013)
33. B.W. Sheldon, S. Mandowara, J. Rankin, Grain boundary induced compositional stress in nanocrystalline ceria films. Solid State Ionics 233, 38-46 (2013)
34. K. Nassau, The Physics and Chemistry of Color: The Fifteen Causes of Color (Wiley, New York, 1983)
35. R. Waser, T. Bieger, J. Maier, Determination of acceptor concentrations and energy levels in oxides using an optoelectrochemical technique. Solid State Commun. 76, 1077-1081 (1990)
36. 3 (Fe-doped): an optical investigation. Sensors and Actuators B 7, 763-768 (1992)
37. J.J. Kim, S.R. Bishop, N. Thompson, Y. Kuru, H.L. Tuller, Optically derived energy band gap states of Pr in ceria. Solid State Ionics 225, 198-200 (2012)
38. S.R. Bishop, J.J. Kim, N. Thompson, H.L. Tuller, Probing redox kinetics in Pr doped ceria mixed ionic electronic conducting thin films by in situ optical absorption measurements. ECS Trans. 45(1), 491-495 (2012)
39. P.R. Shearing, L.E. Howard, P.S. Jørgensen, N.P. Brandon, S.J. Harris, Characterization of the 3-dimensional microstructure of a graphite negative electrode from a Li-ion battery. Electrochem. Commun. 12(3), 374-377 (2010)
40. M. Ebner, F. Geldmacher, F. Marone, M. Stampanoni, V. Wood, X-ray tomography of porous, transition metal oxide based lithium ion battery electrodes. Adv. Energy Mater. 3, 845-850 (2013)
41. J. Wang, Y.-c.K. Chen, Q. Yuan, A. Tkachuk, C. Erdonmez, B. Hornberger, M. Feser, Automated markerless full field hard x-ray microscopic tomography at sub-50nm 3-dimension spatial resolution. Appl. Phys. Lett. 100(14), 143107 (2012)
42. J.R. Wilson, W. Kobsiriphat, R. Mendoza, H.-Y. Chen, J.M. Hiller, D.J. Miller, K. Thornton, P.W. Voorhees, S.B. Adler, S.A. Barnett, Three-dimensional reconstruction of a solid-oxide fuel-cell anode. Nat. Mater. 5(7), 541-544 (2006)
43. R. Clague, P.R. Shearing, P.D. Lee, Z. Zhang, D.J.L. Brett, A.J. Marquis, N.P. Brandon, Stress analysis of solid oxide fuel cell anode microstructure reconstructed from focused ion beam tomography. J. Power Sources. 196(21), 9018-9021 (2011)
44. 2 positive electrode. J. Power Sources 196(7), 3443-3447 (2011)
45. 3 thin films. J. Am. Chem. Soc. 133(44), 17696-17704 (2011)
46. C. Zhang, M.E. Grass, A.H. McDaniel, S.C. DeCaluwe, F. El Gabaly, Z. Liu, K.F. McCarty, R.L. Farrow, M.A. Linne, Z. Hussain, G.S. Jackson, H. Bluhm, B.W. Eichhorn, Measuring fundamental properties in operating solid oxide electro-chemical cells by using in situ X-ray photoelectron spectroscopy. Nat. Mater. 9(11), 944-949 (2010)
47. E. Mutoro, E.J. Crumlin, H. Pöpke, B. Luerssen, M. Amati, M.K. Abyaneh, M.D. Biegalski, H.M. Christen, L. Gregoratti, J. Janek, Y. Shao-Horn, Reversible compositional control of oxide surfaces by electrochemical potentials. J. Phys. Chem. Lett. 3(1), 40-44 (2012)
48. S.V. Kalinin, N. Balke, Local electrochemical functionality in energy storage materials and devices by scanning probe microscopies: status and perspectives. Adv. Mater. 22(35), E193-E209 (2010)
49. 3 surface during lithium intercalation. Solid State Ionics 160, 335-349 (2003)
50. 5). Mat. Res. Soc. Symp. Proc. 756, EE7.10.1-EE7.10.6 (2003)
51. 3-δ cathodes. Adv. Energy Mater. 3, 788-797 (2013)
52. N. Balke, S. Jesse, A.N. Morozovska, E. Eliseev, D.W. Chung, Y. Kim, L. Adamczyk, R.E. García, N. Dudney, S.V. Kalinin, Nanoscale mapping of ion diffusion in a lithium-ion battery cathode. Nat. Nanotechnol. 5, 749-754 (2010)
53. 3. J. Phys. Chem. Lett. 2(7), 801-807 (2011)
54. 3 thin-film surfaces at high temperature. Appl. Phys. Lett. 95(9), 092106 (2009)
55. 3 surfaces. Energy Environ. Sci. 5(7), 7979-7988 (2012)
56. 5+δ cathode material with different orientations. J. Mater. Chem. A 1, 7408-7414 (2013)
57. 4+δ. J. Mater. Chem. 18, 416-422 (2008)
58. M. Abazari, M. Tsuchiya, S. Ramanathan, High-temperature electrical conductivity measurements on nanostructured yttria-doped ceria thin films in ozone. J. Am. Ceram. Soc. 95(1), 312-317 (2012)
59. D. Chen, S.R. Bishop, H.L. Tuller, Praseodymium-cerium oxide thin film cathodes: Study of oxygen reduction reaction kinetics. J. Electroceram. 28(1), 62-69 (2012)
60. W. Lai, S.M. Haile, Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: a case study of ceria. J. Am. Ceram. Soc. 88(11), 2979-2997 (2005)
61. 2 intercalation electrodes: the effect of cycling, storage, temperature, and surface film forming additives. Electrochim. Acta 47, 4291-4306 (2002)
62. E. Barsoukov, J.H. Kim, J.H. Kim, C.O. Yoon, H. Lee, Kinetics of lithium intercalation into carbon anodes: in situ impedance investigation of thickness and potential dependence. Solid State Ionics 116, 249-261 (1999)
63. I. Uchida, H. Ishikawa, M. Mohamedi, M. Umeda, AC-impedance measurements during thermal runaway process in several lithium/polymer batteries. J. Power Sources. 119-121, 821-825 (2003)
64. F.S. Baumann, J. Fleig, G. Cristiani, B. Stuhlhofer, H.-U. Habermeier, J. Maier, Quantitative comparison of mixed con-ducting SOFC cathode materials by means of thin film model electrodes. J. Electrochem. Soc. 154(9), B931 - B941 (2007)
65. J. Fleig, H.-R. Kim, J. Jamnik, J. Maier, Oxygen reduction kinetics of lanthanum manganite (LSM) model cathodes: partial pressure dependence and rate-limiting steps. Fuel Cells. 8(5), 330-337 (2008)
66. W.C. Chueh, S.M. Haile, Electrochemical studies of capacitance in cerium oxide thin films and its relationship to anionic and electronic defect densities. Phys. Chem. Chem. Phys. 11, 8144-8148 (2009)
67. 2 cathodes for rechargeable lithium batteries. J. Electrochem. Soc. 146(2), 473-480 (1999)
68. D. Miller, C. Proff, J. Wen, D. Abraham, Direct observation of microstructural evolution in Li battery cathode oxide particles during electrochemical cycling by in situ electron microscopy. Microsc. Microanal. 18(S2), 1108-1109 (2012)
69. S.J. Harris, A. Timmons, D.R. Baker, C. Monroe, Direct in situ measurements of Li transport in Li-ion battery negative electrodes. Chem. Phys. Lett. 485, 265-274 (2010)
70. Y. Qi, S.J. Harris, In situ observation of strains during lithiation of a graphite electrode. J. Electrochem. Soc. 157(6), A741-A747 (2010)
71. C.M. Wang, W. Xu, J. Liu, D.W. Choi, B. Arey, L.V. Saraf, J.G. Zhang, Z.G. Yang, S. Thevuthasan, D.R. Baer, N. Salmon, In situ transmission electron microscopy and spectroscopy studies of interfaces in Li ion batteries: challenges and opportunities. J. Mater. Res. 25(8), 1541-1547 (2010)
72. 2 nanowire electrode. Science. 330(6010), 1515-1520 (2010)
73. J. Rankin, L.W. Hobbs, L.A. Boatner, C.W. White, An in situ annealing study of lead implanted single crystal calcium titanate. Nucl. Inst. Methods Phys. Res. B 32, 28-31 (1988)
74. C. Villevieille, M. Boinet, L. Monconduit, Direct evidence of morphological changes in conversion type electrodes in Li-ion battery by acoustic emission. Electrochem. Commun. 12(10), 1336-1339 (2010)
75. K. Rhodes, N. Dudney, E. Lara-Curzio, C. Daniel, Understanding the degradation of silicon electrodes for lithium-ion batteries using acoustic emission. J. Electrochem. Soc. 157(12), A1354-A1360 (2010)
76. T. Ohzuku, H. Tomura, K. Sawai, Monitoring of particle fracture by acoustic emission during charge and discharge of Li/MnO2 cells. J. Electrochem. Soc. 144(10):3496-3500 (1997)
77. K. Sawai, H. Tomura, T. Ohzuku, Acoustic emission histometry for battery material research. Denki Kagaku 66(3):301-307 (1998)
78. K. Sawai, K. Yoshikawa, H. Tomura, T. Ohzuku, Characterization of materials by acoustic emission histometry for advanced lithium batteries. Prog. Batter. Battery Mater. 17, 201-207 (1998)
79. S. Didier-Laurent, H. Idrissi, L. Roué, In-situ study of the cracking of metal hydride electrodes by acoustic emission technique. J. Power Sources 179(1), 412-416 (2008)
80. 3-δ. J. Am. Ceram. Soc. 95(8), 2608-2613 (2012)
81. 2-δ at high temperatures under controlled atmospheres. Solid State Ionics 198(1), 32-38 (2011)
82. T. Kushi, K. Sato, A. Unemoto, S. Hashimoto, K. Amezawa, T. Kawada, Elastic modulus and internal friction of SOFC electrolytes at high temperatures under controlled atmospheres. J. Power Sources 196(19), 7989-7993 (2011)
83. K. Sato, K. Yashiro, T. Kawada, H. Yugami, T. Hashida, J. Mizusaki, Fracture process of nonstoichiometric oxide based solid oxide fuel cell under oxidizing/reducing gradient conditions. J. Power Sources 195(17), 5481-5486 (2010)
84. S. Watanabe, K. Sato, Y. Takeyama, F. Iguchi, K. Yashiro, T. Hashida, J. Mizusaki, T. Kawada, in Proceedings of the ASME 2010 Eighth International Fuel Cell Science, Engineering and Technology Conference. Development of in-situ mechanical testing method for SOFC components (2010)
85. J. Milhans, D.S. Li, M. Khaleel, X. Sun, M.S. Al-Haik, A. Harris, H. Garmestani, Mechanical properties of solid oxide fuel cell glass-ceramic seal at high temperatures. J. Power Sources 196(13), 5599-5603 (2011)
86. 2. Adv. Energy Mater. 2(8), 940-944 (2012)
87. 4 from first principles. Phys. Rev. B. 73, 174112 (2006)
88. Y. Qi, H. L.G. Hector Jr., A. Timmons, Threefold increase in the Young's modulus of graphite negative electrode during lithium intercalation. J. Electrochem. Soc. 157(5), A558-A566 (2010)
89. 2. J. Phys. Condens. Matter 18(42), 9615-9624 (2006)
90. A. Kushima, B. Yildiz, Oxygen ion diffusivity in strained yttria stabilized zirconia: where is the fastest strain? J. Mater. Chem. 20(23), 4809 (2010)
91. 3 and implications for the solid electrolyte interphase in li-ion batteries. J. Phys. Chem. 117, 8579-8593 (2013)
92. D. Marrocchelli, S.R. Bishop, H.L. Tuller, G.W. Watson, B. Yildiz, Charge localization increases chemical expansion in cerium-based oxides. Phys. Chem. Chem. Phys. 14(35), 12070 (2012)
93. P.P. Dholabhai, S. Anwar, J.B. Adams, P. Crozier, R. Sharma, Kinetic lattice Monte Carlo model for oxygen vacancy diffusion in praseodymium doped ceria: applications to materials design. J. Solid State Chem. 184(4), 811-817 (2011)
94. P.P. Dholabhai, J.B. Adams, P. Crozier, R. Sharma, Oxygen vacancy migration in ceria and Pr-doped ceria: A DFT+U study. J. Chem. Phys. 132(9), 094104 (2010)
95. Y.-T. Cheng, M.W. Verbrugge, The influence of surface mechanics on diffusion induced stresses within spherical nanoparticles. J. Appl. Phys. 104, 083521 (2008)
96. Y.-T. Cheng, M.W. Verbrugge, Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation. J. Power Sources 190, 453-460 (2009)
97. Y.-T. Cheng, M.W. Verbrugge, Diffusion-induced stress, interfacial charge transfer, and criteria for avoiding crack initiation of electrode particles. J. Electrochem. Soc. 157(4), A508-A516 (2010)
98. R. Deshpande, Y.-T. Cheng, M.W. Verbrugge, A. Timmons, Diffusion induced stresses and strain energy in a phase-transforming spherical electrode particle. J. Electrochem. Soc. 158(6), A718-A724 (2011)
99. J. Christensen, J. Newman, A mathematical model of stress generation and fracture in lithium manganese oxide. J. Electrochem. Soc. 153(6), A1019-A1030 (2006)
100. J. Park, W. Lu, A.M. Sastry, Numerical simulation of stress evolution in lithium manganese dioxide particles due to coupled phase transition and intercalation. J. Electrochem. Soc. 158(2), A201-A206 (2011)
101. X. Zhang, W. Shyy, A.M. Sastry, Numerical simulation of intercalation-induced stress in Li-ion battery electrode particles. J. Electrochem. Soc. 154(10), A910-A916 (2007)
102. X. Zhang, A.M. Sastry, W. Shyy, Intercalation-induced stress and heat generation within single lithium-ion battery cathode particles. J. Electrochem. Soc. 155(7), A542-A552 (2008)
103. R. Deshpande, Y. Qi, Y.-T. Cheng, Effects of concentration-dependent elastic modulus on diffusion-induced stresses for battery applications. J. Electrochem. Soc. 157(8), A967-A971 (2010)
104. S.J. Harris, R.D. Deshpande, Y. Qi, I. Dutta, Y.-T. Cheng, Mesopores inside electrode particles can change the Li-ion transport mechanism and diffusion-induced stress. J. Mater. Res. 25(8), 1433-1440 (2010)
105. K.E. Aifantis, J.P. Dempsey, Stable crack growth in nanostructured Li-batteries. J. Power Sources 143, 203-211 (2005)
106. K.E. Aifantis, S.A. Hackney, J.P. Dempsey, Design criteria for nanostructured Li-ion batteries. J. Power Sources 165, 874-879 (2007)
107. Y. Hu, X. Zhao, Z. Suo, Averting cracks caused by insertion reaction in lithium-ion batteries. J. Mater. Res. 25(6), 1007-1010 (2010)
108. M. Doyle, J.C. Newman, Analysis of capacity-rate data for lithium batteries using simplified models of the discharge process. J. Appl. Electrochem. 27, 846-856 (1997)
109. M. Doyle, J. Newman, A.S. Gozdz, C.N. Schmutz, J.-M. Tarascon, Comparison of modeling predictions with experimental data from plastic lithium ion cells. J. Electrochem. Soc. 143(6), 1890-1903 (1996)
110. M. Doyle, T.F. Fuller, J. Newman, Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell. J. Electrochem. Soc. 140(6), 1526-1533 (1993)
111. M. Doyle, J. Newman, The use of mathematical modeling in the design of lithium/polymer battery systems. Electrochim. Acta 40, 2191-2196 (1995)
112. J. Newman, W. Tiedemann, Porous-electrode theory with battery applications. Aiche J. 21(1), 25-41 (1975)
113. T.F. Fuller, M. Doyle, J. Newman, Simulation and optimization of the dual lithium ion insertion cell. J. Electrochem. Soc. 141(1), 1-10 (1994)
114. S. Golmon, K. Maute, M.L. Dunn, Numerical modeling of electrochemical-mechanical interactions in lithium polymer batteries. Comput. Struct. 87, 1567-1579 (2009)
115. S. Renganathan, G. Sikha, S. Santhanagopalan, R.E. White, Theoretical analysis of stresses in a lithium ion cell. J. Electrochem. Soc. 157(2), A155-A163 (2010)
116. J. Christensen, Modeling diffusion-induced stress in Li-ion cells with porous electrodes. J. Electrochem. Soc. 157(3), A366-A380 (2010)
117. R. Purkayastha, R.M. McMeeking, A linearized model for lithium ion batteries and maps for their performance and failure. J. Appl. Mech. 79(3), 031021 (2012)
118. R.T. Purkayastha, R.M. McMeeking, An integrated 2-D model of a lithium ion battery: the effect of material parameters and morphology on storage particle stress. Comput. Mech. 50(2), 209-227 (2012)
119. J. Christensen, J. Newman, Stress generation and fracture in lithium insertion materials. J. Sold State Electrochem. 10, 293-319 (2006)
120. R.E. García, Y.-M. Chiang, W.C. Carter, P. Limthongkul, C.M. Bishop, Microstructrual modeling and design of rechargeable lithium-ion batteries. J. Electrochem. Soc. 152(1), A255-A263 (2005)
121. 2-based rocking-chair rechargeable batteries. J. Electrochem. Soc. 156(11), A896-A904 (2009)
122. 4 spinel particles. J. Electrochem. Soc. 158(4), A371-A378 (2011)
123. H.-W. Chiang, R.N. Blumenthal, R.A. Fournelle, A high temperature lattice parameter and dilatometer study of the defect structure of nonstoichiometric cerium dioxide. Solid State Ionics 66, 85-95 (1993)
124. S.R. Bishop, K. Duncan, E.D. Wachsman, Thermo-chemical expansion of SOFC materials. ECS Trans. 1, 13-21 (2006)
125. 3-x. Solid State Ionics 176(35-36), 2671-2676 (2005)
126. S.B. Adler, Chemical expansivity of electrochemical ceramics. J. Am. Ceram. Soc. 84, 2117-2119 (2001)
127. S.J. Hong, A.V. Virkar, Lattice parameters and densities of rare-earth oxide doped ceria electrolytes. J. Am. Ceram. Soc. 78(2), 433-439 (1995)
128. S.R. Bishop, K.L. Duncan, E.D. Wachsman, Thermo-chemical expansion in strontium-doped lanthanum cobalt iron oxide. J. Am. Ceram. Soc. 93(12), 4115-4121 (2010)
129. 2 solid solutions: kinetic studies. ECS Trans. 35, 1137-1144 (2011)
130. 2-δ. ECS Trans. 41, 153-159 (2012)
131. M. Morales, J.J. Roa, X.G. Capdevila, M. Segarra, S. Piñol, Mechanical properties at the nanometer scale of GDC and YSZ used as electrolytes for solid oxide fuel cells. Acta Mater. 58(7), 2504-2509 (2010)
132. R. Korobko, C.-T. Chen, S. Kim, S.R. Cohen, E. Wachtel, N. Yavo, I. Lubomirsky, Influence of Gd content on the room temperature mechanical properties of Gd-doped ceria. Scripta Mater. 66(3-4), 155-158 (2012)
133. E. Wachtel, I. Lubomirsky, The elastic modulus of pure and doped ceria. Scripta Mater. 65(2), 112-117 (2011)
134. 1.9-δ electrolyte thin films. Adv. Funct. Mater. 21(3), 532-539 (2011)
135. Y. Wang, K. Duncan, E.D. Wachsman, F. Ebrahimi, The effect of oxygen vacancy concentration on the elastic modulus of fluorite-structured oxides. Solid State Ionics 178(1-2), 53-58 (2007)
136. T. Hashida, K. Sato, Y. Takeyama, T. Kawada, J. Mizusaki, Deformation and fracture characteristics of zirconia and ceria-based electrolytes for SOFCs under reducing atmospheres. ECS Trans. 25, 1565-1572 (2009)
137. A. Atkinson, A. Selçuk, Mechanical behaviour of ceramic oxygen ion-conducting membranes. Solid State Ionics 134, 59-66 (2000)
138. A. Atkinson, T.M.G.M. Ramos, Chemically-induced stresses in ceramic oxygen ion-conducting membranes. Solid State Ionics 129, 259-269 (2000)
139. R. Krishnamurthy, B.W. Sheldon, Stresses due to oxygen potential gradients in non-stoichiometric oxides. Acta Mater. 52, 1807-1822 (2004)
140. 2. Solid State Ionics 20(1), 81-84 (1986)
141. 4. Electrochem. Solid-State Lett. 8(8), A409-A413 (2005)
142. T. Ohzuku, M. Kitagawa, T. Hirai, Electrochemistry of manganese dioxide in lithium nonaqueous cell III. X-ray diffractional study on the reduction of spinel-related manganese dioxide. J. Electrochem. Soc. 137(3), 769-775 (1990)
143. 2. J. Electrochem. Soc. 139(8), 2091 (1992)
144. 2 (R 3 ̄ m) intercalation cathode for rechargeable lithium batteries. J. Electrochem. Soc. 146(3), 862-868 (1999)
145. 2 battery cathodes. J. Power Sources 81-82, 594-598 (1999)
146. 4 particles. Electrochem. Solid-State Lett. 11(3), A25-A29 (2008)
147. J. Shim, R. Kostecki, T. Richardson, X. Song, K.A. Striebel, Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature. J. Power Sources 112(1), 222-230 (2002)
148. Y. Shin, A. Manthiram, Factors influencing the capacity fade of spinel lithium manganese oxides. J. Electrochem. Soc. 151(2), A204-A208 (2004)
149. 2 materials for advanced lithium-ion batteries. J. Power Sources 146(1-2), 39-44 (2005)
150. 7Li NMR spectroscopy. Electrochem. Commun. 7(12), 1249-1251 (2005)
151. W. Choi, A. Manthiram, Superior capacity retention spinel oxyfluoride cathodes for lithium-ion batteries. Electrochem. Solid-State Lett. 9(5), A245-A248 (2006)
152. Q.C. Horn, K. White, in 211th Meeting of The Electrochemical Society. Understanding lithium-ion degradation and failure mechanisms by cross-section analysis (2007)
153. S. Bhattacharya, A.R. Riahi, A.T. Alpas, In-situ observations of lithiation/de-lithiation induced graphite damage during electrochemical cycling. Scripta Mater. 64(2), 165-168 (2011)
154. 3 as anode material for solid oxide fuel cells. J. Power Sources 206, 204-209 (2012)
155. S. Giraud, J. Canel, Young's modulus of some SOFCs materials as a function of temperature. J. Eur. Ceram. Soc. 28(1), 77-83 (2008)
156. M. Mavrikakis, B. Hammer, J. Nørskov, Effect of strain on the reactivity of metal surfaces. Phys. Rev. Lett. 81(13), 2819-2822 (1998)
157. B. Hammer, J.K. Nørskov, Why gold is the noblest of all the metals. Nature. 376, 238-240 (1995)
158. F.W. Herbert, K.J. Van Vliet, B. Yildiz, Plasticity-induced oxidation reactivity on Ni(100) studied by scanning tunneling spectroscopy. MRS Commun. 2(01), 23-27 (2012)
159. P. Strasser, S. Koh, T. Anniyev, J. Greeley, K. More, C. Yu, Z. Liu, S. Kaya, D. Nordlund, H. Ogasawara, M.F. Toney, A. Nilsson, Lattice-strain control of the activity in dealloyed core-shell fuel cell catalysts. Nat. Chem. 2(6), 454-460 (2010)
160. J. Suntivich, H.A. Gasteiger, N. Yabuuchi, H. Nakanishi, J.B. Goodenough, Y. Shao-Horn, Design principles for oxygen-reduction activity on perovskite oxide catalysts for fuel cells and metal-air batteries. Nat. Chem. 3(7), 546-550 (2011)
161. Y.-L. Lee, J. Kleis, J. Rossmeisl, Y. Shao-Horn, D. Morgan, Prediction of solid oxide fuel cell cathode activity with first-principles descriptors. Energy Environ. Sci. 4, 3966-3970 (2011)
162. 3-δ mixed conducting oxides-A case study. Adv. Energy Mater. 1(6), 1184-1191 (2011)
163. A. Chroneos, B. Yildiz, A. Tarancón, D. Parfitt, J.A. Kilner, Oxygen diffusion in solid oxide fuel cell cathode and electrolyte materials: mechanistic insights from atomistic simulations. Energy Environ. Sci. 4(8), 2774-2789 (2011)
164. 3(001) surface. J. Mater. Chem. 21(47), 18983 (2011)
165. 3 with oxygen. Phys. Rev. B 82(11), 115435 (2010)
166. 3 at solid oxide fuel cell interfaces. Thin Solid Films 516(6), 880-884 (2008)
167. 3 films. Appl. Phys. Lett. 80, 622-624 (2002)
168. G. Jose la O', S.-J. Ahn, E. Crumlin, Y. Orikasa, M.D. Biegalski, H.M. Christen, Y. Shao-Horn, Catalytic activity enhancement for oxygen reduction on epitaxial perovskite thin films for solid-oxide fuel cells. Angew. Chem. Int. Ed. 49(31), 5344-5347 (2010)
169. 3-type perovskites at elevated temperatures. Appl. Phys. A 62, 335-343 (1996)
170. 3 thin films as a function of oxygen partial pressure. Appl. Phys. Lett. 93(15), 151904 (2008)
171. 3 manganese perovskite surface. Surf. Sci. 512, L346-L352 (2002)
172. 3. Appl. Phys. Lett. 77(4), 570-572 (2000)
173. W. Jung, H.L. Tuller, Investigation of surface Sr segregation in model thin film solid oxide fuel cell perovskite electrodes. Energy Environ. Sci. 5, 5370-5378 (2012)
174. 3-δ thin films - correlations to cathode surface activity and stability. Chem. Mater. 24(6), 1116-1127 (2012)
175. 3-δ thin film electrodes. J. Electrochem. Soc. 158(6), B727-B734 (2011)
176. 2 reduction in solid oxide fuel cells. Solid State Ionics 138, 183-190 (2001)
177. W. Lee, J.W. Han, Y. Chen, Z. Cai, B. Yildiz, Cation size mismatch and charge interactions drive dopant segregation at the surfaces of manganite perovskites. J. Am. Chem. Soc. 135, 7909-7925 (2013)
178. V.A. Sethuraman, V. Srinivasan, A.F. Bower, P.R. Guduru, In situ measurements of stress-potential coupling in lithiated silicon. J. Electrochem. Soc. 157(11), A1253-A1261 (2010)
179. A.K. Pannikkat, R. Raj, Measurement of an electrical potential induced by normal stress applied to the interface of an ionic material at elevated temperatures. Acta Mater. 47(12), 3423-3431 (1999)
180. A.F. Bower, P.R. Guduru, V.A. Sethuraman, A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell. J. Mech. Phys. Solids 59(4), 804-828 (2011)
181. 2 electrolytes through strain: a computer simulation study. Energy Environ. Sci. 5, 5445-5453 (2012)
182. N. Sata, K. Eberman, K. Eberl, J. Maier, Mesoscopic fast ion conduction in nanometre-scale planar heterostructures. Nature. 408, 946-949 (2000)
183. I. Kosacki, C.M. Rouleau, P.F. Becher, J. Bentley, D.H. Lowndes, Nanoscale effects on the ionic conductivity in highly textured YSZ thin films. Solid State Ionics 176(13-14), 1319-1326 (2005)
184. 3 heterostructures. Science 321(5889), 676-680 (2008)
185. 3 Heterostructures. Science 324(5926), 465 (2009)
186. A. Cavallaro, M. Burriel, J. Roqueta, A. Apostolidis, A. Bernardi, A. Tarancón, R. Srinivasan, S.N. Cook, H.L. Fraser, J.A. Kilner, D.W. McComb, J. Santiso, Electronic nature of the enhanced conductivity in YSZ-STO multilayers deposited by PLD. Solid State Ionics 181(13-14), 592-601 (2010)
187. N. Schichtel, C. Korte, D. Hesse, J. Janek, Elastic strain at interfaces and its influence on ionic conductivity in nanoscaled solid electrolyte thin films - theoretical considerations and experimental studies. Phys. Chem. Chem. Phys. 11(17), 3043 (2009)
188. 3/YSZ multilayers. Phys. Chem. Chem. Phys. 15, 1944-1955 (2013)
189. 2 heterointerfaces. ACS Nano 6, 10524-10534 (2012)
190. 2/YSZ heterolayers. J. Mater. Chem. 16, 1067-1081 (2006)
191. B. Li, J. Zhang, T. Kaspar, V. Shutthanandan, R.C. Ewing, J. Lian, Multilayered YSZ/GZO films with greatly enhanced ionic conduction for low temperature solid oxide fuel cells. Phys. Chem. Chem. Phys. 15, 1296-1301 (2013)
192. S. Kim, H.J. Avila-Paredes, S. Wang, C.-T. Chen, R.A. De Souza, M. Martin, Z.A. Munir, On the conduction pathway for protons in nanocrystalline yttria-stabilized zirconia. Phys. Chem. Chem. Phys. 11, 3035-3038 (2009)
193. S. Sanna, V. Esposito, A. Tebano, S. Licoccia, E. Traversa, G. Balestrino, Enhancement of ionic conductivity in Sm-doped ceria/yttria- stabilized zirconia heteroepitaxial structures. Small 6(17), 1863-1867 (2010)
194. 3. Phys. Chem. Chem. Phys. 10, 4623-4635 (2008)
195. M. Sillassen, P. Eklund, N. Pryds, E. Johnson, U. Helmersson, J. Bøttiger, Low-temperature superionic conductivity in strained yttria-stabilized zirconia. Adv. Funct. Mater. 20(13), 2071-2076 (2010)
196. 2-δ thin films. Appl. Phys. Lett. 100(3), 033105 (2012)
197. 2 electrode. Solid State Ionics 99, 173-183 (1997)