A hybrid low power biopatch for body surface potential measurement

IEEE Journal of Biomedical and Health Informatics

Volumn 17, Issue 3, 2013, Pages 591-599

  Yang, Geng ^a   Chen, Jian ^a,b   Xie, Li ^a   Mao, Jia ^a   Tenhunen, Hannu ^a   Zheng, Li Rong ^a,c  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b ERICSSON RESEARCH   (Sweden)

^c FUDAN UNIVERSITY   (China)

Author keywords

Active cable; Anisotropic conductive adhesive (ACA); Biopatch; Body surface potential; Inkjet printing; System on chip (SoC); Wearable device

Indexed keywords

ADHESIVE JOINTS; ADHESIVES; ANALOG TO DIGITAL CONVERSION; ANISOTROPY; BENDING TESTS; BIOMEDICAL SIGNAL PROCESSING; ELECTRIC SIGNAL SYSTEMS; INK JET PRINTING; PROGRAMMABLE LOGIC CONTROLLERS; SURFACE POTENTIAL; WEARABLE COMPUTERS;

ANISOTROPIC CONDUCTIVE ADHESIVES; BIOPATCH; BODY SURFACE POTENTIALS; SYSTEM ON CHIPS (SOC); WEARABLE DEVICES;

SYSTEM-ON-CHIP;

AMBULATORY MONITORING; ARTICLE; CLOTHING; ELECTROCARDIOGRAPHY; ELECTRONICS; EQUIPMENT; EQUIPMENT DESIGN; HUMAN; PAPER; PRINTING;

BODY SURFACE POTENTIAL MAPPING; CLOTHING; ELECTRONICS, MEDICAL; EQUIPMENT DESIGN; HUMANS; MONITORING, AMBULATORY; PAPER; PRINTING;

EID: 84885120353     PISSN: 21682194     EISSN: None     Source Type: Journal    
DOI: 10.1109/JBHI.2013.2252017     Document Type: Article

References (32)

1. H. Zhang, Y. J. Qin, and Z. L Hong, "A 1.8-V 770-nW biopotential acquisition system for portable applications," in Proc. IEEE Biomed. Circuits Syst. Conf., Nov. 2009, pp. 93-96.
2. B. D. Farnsworth, D. M. Talyor, R. J. Triolo, and D. J. Young, "Wireless in vivo EMG sensor for intelligent prosthetic control," in Proc. Int. Solid-State Sensors, Actuators Microsyst. Conf., Jun. 2009, pp. 358-361.
3. Y. T. Zhang, Y. S. Yan, and C. C. Y. Poon, "Some perspectives on affordable healthcare systems in China," in Proc. IEEE 29th Annu. Int. Conf. Eng. Med. Biol. Soc., Aug. 2007, p. 6154.
4. A. Casson, D. Yates, S. Smith, J. Duncan, and E. Rodriguez-Villegas, "Wearable electroencephalography," IEEE Eng. Med. Biol. Mag., vol. 29, no. 3, pp. 44-56, May 2010.
5. American Heart Association Statistics Committee and Stroke Statistics Subcommittee, Heart disease and stroke statistics 2010 updates: A report from the American Heart Association Statistics Committee and Stroke Statistics Subcommittee [Online]. Available: circ.ahajournals.org
6. H. Koch, A. Richter, R. Kursten, and M. Zabel, "Composition of approximated body-surface-potential-maps by utilizing a common 12-lead-ECG device," IEEE Trans. Biomed. Eng., vol. 52, no. 3, pp. 463-470, Mar. 2005. (Pubitemid 40343743)
7. H. C. Powell, M. A. Hanson, and J. Lach, "On-body inertial sensing and signal processing for clinical assessment of tremor," IEEE Trans. Biomed. Circuits Syst., vol. 3, no. 2, pp. 108-116, Apr. 2009.
8. C.-T. Lin, C.-J. Chang, B.-S. Lin, S.-H. Hung, C.-F. Chao, and I.-J.Wang, "A Real-Time wireless brain - computer interface system for drowsiness detection," IEEE Trans. Biomed. Circuits Syst., vol. 4, no. 4, pp. 214-222, Aug. 2010.
9. E. Halonen, A. Halme, T. Karinsalo, P. Iso-Ketola, M. Mäntysalo, and R. Mäkinen, "Dynamic bending test analysis of inkjet-printed conductors on flexible substrates," in Proc. Electron. Compon. Technol. Conf., 2012, pp. 80-85.
10. M. Singh, "Inkjet printing - process and its applications," Adv. Mater., vol. 22, pp. 673-685, Feb. 2010.
11. P. Kunnari, E. Laine, K. Niittynen, and J. Koskinen, "Utilizing inkjet printing to fabricate electrical interconnections in a system-in-package," ELSEVIER Microelectron. Eng., vol. 87, no. 11, pp. 2382-2390, 2010.
12. K. Saarinen, L. Frisk, and L. Ukkonen, "Effects of cycling humidity on the performance of RFID tags with ACA joints," IEEE Trans. Rel., vol. 61, no. 1, pp. 23-31, Mar. 2012.
13. M. Mäntysalo, L. Xie, F. Jonsson, Y. Feng, A. L. Cabezas, and L.-R. Zheng, "System integration of smart packages using printed electronics," in Proc. IEEE 62nd Electron. Compon. Technol. Conf., 2012, pp. 997-1002.
14. J. Chen, L. Rong, F. Jonsson, G. Yang, and L.-R. Zheng, "The design of all-digital polar transmitter based on ADPLL and phase synchronized ΔΣ modulator," IEEE J. Solid-State Circuits, vol. 47, no. 5, pp. 1154-1164, May 2012.
15. G. Yang, J. Chen, Y. Cao, T. Hannu, and L.-R. Zheng, "A novel wearable ECG monitoring system based on active-cable and intelligent electrodes," in Proc. IEEE 10th Int. Conf. e-Health Netw., Appl. Serv., Jul. 2008, pp. 156-159.
16. Q. Wan, G. Yang, Q. Chen, and L.-R. Zheng, "Electrical performance of inkjet printed flexible cable for ECG monitoring," in Proc. 20th IEEE Electron. Perform. Electron. Packag. Syst., Oct. 2011, pp. 231-234.
17. R. F. Yazicioglu, P. Merken, R. Puers, and C. V. Hoof, "A 200 μW eight-channel EEG acquisition SoC for ambulatory EEG systems," IEEE J. Solid-State Circuits, vol. 43, no. 12, pp. 3025-3028, Dec. 2008.
18. G. Yang, J. Chen, F. Jonsson, H. Tenhunen, and L.-R. Zheng, "A multiparameter bio-electric SoC sensorwith integrated 2-wire data transmission protocol for wearable healthcare system," in Proc. Design, Autom. Test Eur. Conf. Exhib., Mar. 2012, pp. 443-448.
19. G. Yang, J. Chen, F. Jonsson, T. Hannu, and L.-R. Zheng, "A 1.0 V 78 μW reconfigurable SoC embedded in an intelligent electrode for continuous ECG applications," in Proc. IEEE 31st Annu. Int. Conf. Eng. Med. Biol. Soc., Sep. 2009, pp. 2316-2319.
20. G. Yang, J. Chen, T. Hannu, and L.-R. Zheng, "An SoC solution for intelligent electrodes and active-cable used in a wearable ECG monitoring system," in Proc. Int. Conf. Biomed. Electron. Devices, Jan. 2009, pp. 209-213.
21. Y. Feng, L. Xie, M. Mueller, A. L. Cabezas, M. Mantysalo, F. Forsberg, Q. Chen, L.-R. Zheng, andW. Zapka, "Fabrication and performance evaluation of ultralow-cost inkjet-printed chipless RFID tags," in Proc. Largearea, Organic Printed Electron. Conv., 2012, pp. 257-260.
22. B. An, X. Cai, H. Chu, X. Lai, F. Wu, and Y. Wu, "Flex reliability of RFID inlays assembled by anisotropic conductive adhesive," in Proc. Int. Symp. High Density Packag. Microsyst. Integr., 2007, pp. 60-63.
23. X. Cai, B. An, Y. Wu, F. Wu, and X. Lai, "Research on the contact resistance and reliability of flexible RFID tag inlays packaged by anisotropic conductive paste," in Proc. 9th Int. Conf. Electron. Packag. Technol. High Density Packag., Jul. 2008, pp. 129-133.
24. J. S. Rasul, "Chip on paper technology utilizing anisotropically conductive adhesive for smart label applications," Microelectron. Rel., vol. 44, no. 1, pp. 135-140, Jan. 2004.
25. Y. Li and C. P. Wong, "Recent advances of conductive adhesives as a lead-free alternative in electronic packaging: Materials, processing, reliability and applications," Elsevier, Mater. Sci. Eng., vol. 51, no. 1-3, pp. 1-35, 2006. (Pubitemid 43344279)
26. R. R. Tummala, E. J. Rymanszewski, and A. G. Klopfenstein, Microelectronics Packaging Handbook-Subsystem Packaging, Part III, 2nd ed. London, U.K.: Chapman & Hall, 1997, p. 628.
27. S.-T. Lu andW.-H. Chen, "Reliability and flexibility of ultra-thin chip-on-flex (UTCOF) interconnects with anisotropic conductive adhesive (ACA) joints," IEEE Trans. Adv. Packag., vol. 33, no. 3, pp. 702-712, Aug. 2010.
28. L. Xie, G. Yang, M. Mäntysalo, L. L. Xu, F. Jonsson, and L.-R. Zheng, "Heterogeneous integration of bio-sensing system-on-chip and printed electronics," IEEE J. Emerg. Sel. Topics Circuits Syst., vol. 2, no. 4, pp. 672-682, Dec. 2012.
29. E. Halonen, A. Halme, T. Karinsalo, P. Iso-Ketola, M. Mantysalo, and R. Makinen, "Dynamic bending test analysis of inkjet-printed conductors on flexible substrates," in Proc. IEEE 62nd Electron. Compon. Technol. Conf., May 2012, pp. 80-85.
30. Y. M. Chi, T.-P. Jung, and G. Cauwenberghs, "Dry-contact and noncontact biopotential electrodes: Methodological review," IEEE Rev. Biomed. Eng., vol. 3, pp. 106-119, Oct. 2010.
31. J. G. Webster, "Reducing motion artifacts and interference in biopotential recording," IEEE Trans. Biomed. Eng., vol. BME-31, no. 12, pp. 823-826, Dec. 1984.
32. Y. M. Chi and G. Cauwenberghs, "Micropower non-contact EEG electrode with active common-mode noise suppression and input capacitance cancellation," in Proc. IEEE 31st Annu. Int. Conf. Eng. Med. Biol. Soc., Sep. 2009, pp. 4218-4221.