Heterogeneous integration of bio-sensing system-on-chip and printed electronics

IEEE Journal on Emerging and Selected Topics in Circuits and Systems

Volumn 2, Issue 4, 2012, Pages 672-682

  Xie, Li ^a   Yang, Geng ^a   Mäntysalo, Matti ^b   Xu, Lin Lin ^a   Jonsson, Fredrik ^a   Zheng, Li Rong ^a,c  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b TAMPERE UNIVERSITY OF TECHNOLOGY   (Finland)

^c FUDAN UNIVERSITY   (China)

Author keywords

Heterogeneous system integration; inkjet printing technology; system on chip (SoC); wearable healthcare device

Indexed keywords

BARE DIES; BIOSENSING; BIOSIGNALS; CHIP-ON-FLEX; DIGITAL FABRICATION; DIRECT INTEGRATION; ELECTROCARDIOGRAM RECORDINGS; ELECTRODE PATTERN; FINE RESOLUTION; FLEXIBLE SUBSTRATE; HEALTHCARE MONITORING; HETEROGENEOUS INTEGRATION; HETEROGENEOUS SYSTEMS; IN-VIVO TESTS; INKJET PRINTING TECHNOLOGY; INTEGRATION APPROACH; LOW POWER; MIXED SIGNAL SYSTEM ON CHIPS; NANO-PARTICLE SILVER; OPTIMAL SIZE; PAD SIZES; PRINTED ELECTRODES; PRINTED ELECTRONICS; SILICON-BASED CIRCUITS; SYSTEM ON CHIPS; SYSTEM-ON-CHIP; WEARABLE HEALTHCARE DEVICE; WEARABLE SYSTEMS;

APPLICATION SPECIFIC INTEGRATED CIRCUITS; COST EFFECTIVENESS; ELECTRIC SIGNAL SYSTEMS; ELECTRODES; HEALTH CARE; INK JET PRINTING; LOW POWER ELECTRONICS; SENSORS; WEARABLE COMPUTERS;

PROGRAMMABLE LOGIC CONTROLLERS;

EID: 84871366070     PISSN: 21563357     EISSN: None     Source Type: Journal    
DOI: 10.1109/JETCAS.2012.2223554     Document Type: Article

References (47)

1. D. Jabaudon, J. Sztajzel, K. Sievert, T. Landis, and R. Sztajzel, "Usefulness of ambulatory 7-day ECG monitoring for the detection of atrial fibrillation and flutter after acute stroke and transient ischemic attack, " Stroke, J. Am. Heart Assoc., vol. 35, p. 1647, 2004.
2. M. R. Neuman, G. D. Baura, S. Meldrum, O. Soykan, M. E. Valentinuzzi, R. S. Leder, S. Micera, and Y. T. Zhang, "Advances in medical devices andmedical electronics, " Proc. IEEE, vol. 100, pp. 1537-1550, May 13, 2012.
3. L. Gatzoulis and I. Iakovidis, "Wearable and portable eHealth systems, " IEEE Eng. Med. Biol. Mag., vol. 26, no. 5, pp. 51-56, Sep.-Oct. 2007. (Pubitemid 47483045)
4. J. Yoo, Y. Long, L. Seulki, H. Kim, and H.-J. Yoo, "A wearable ECG acquisition system with compact planar-fashionable circuit board-based shirt, " IEEE Trans. Inf. Technol. Biomed. e, vol. 13, no. 6, pp. 897-902, Nov. 2009.
5. A. Casson, D. Yates, S. Smith, J. Duncan, and E. Rodriguez-Villegas, "Wearable electroencephalography, " IEEE Med. Biol. Mag., vol. 29, no. 3, pp. 44-56, May-Jun. 2010.
6. G. Yang, L. Xie, M. Mäntysalo, J. Chen, F. Jonsson, H. Tenhunen, and L.-R. Zheng, "Bio-patch design and implementation based on a low-power system-on-chip and paper-based inkjet printing technology, " IEEE Trans. Inf. Technol. Biomed., to be published.
7. K. Benaissa et al., "RF CMOS on high-resistivity substrates for system-on-chip applications, " IEEE Trans. Electron Devices, vol. 50, no. 3, pp. 567-576, Mar. 2003.
8. D. Buss et al., "SOC CMOS technology for personal Internet products, " IEEE Trans. Electron Device, vol. 50, no. 3, pp. 546-556, Mar. 2003.
9. , K. Hecker, Ed., OE-A Roadmap for Organic and Printed Electronics, 3rd ed. Frankfurt: VDMA Verlag, 2009.
10. M. Singh, H. M. Haverinen, P. Dhagat, and G. E. Jabbour, "Inkjet printing-process and its applications, " Adv. Mater., vol. 22, pp. 673-685.
11. V. Pekkanen, M. Mäntysalo, K. Kaija, P. Mansikkamäki, and E. Kunnari et al., "Utilizing inkjet printing to fabricate electrical interconnections in a System-in-Package, "Microelectron. Eng., vol. 87, no. 11, pp. 2382-2390, 2010.
12. R. Ramakrishnan, N. Saran, and R. J. Petcavich, "Selective inkjet printing of conductors for displays and flexible printed electronics, " J. Display Technol., vol. 7, no. 6, pp. 344-347, Jun. 2011.
13. B. Ando and S. Baglio, "Inkjet-printed sensors: A useful approach for low cost, rapid prototyping [instrumentation notes], " IEEE Instrum. Meas. Mag., vol. 14, no. 5, pp. 36-40, Oct. 2011.
14. J. Virtanen, L. Ukkonen, T. Bjorninen, A. Z. Elsherbeni, and L. Sydänheimo, "Inkjet-printed humidity sensor for passive UHF RFID systems, " IEEE Trans. Instrum. Meas., vol. 60, no. 8, pp. 2768-2777, Aug. 2011.
15. G. Shaker, S. Safavi-Naeini, N. Sangary, and M. M. Tentzeris, "Inkjet printing of Ultrawideband (UWB) antennas on paper-based substrates, " IEEE Antennas Wireless Propag. Lett., vol. 10, pp. 111-114, 2011.
16. B. T. Shao, Q. Chen, Y. Amin, J. Hllstedt, R. Liu, H. Tenhunen, and L.-R. Zheng, "Process-dependence of inkjet printed folded dipole antenna for 2. 45 GHz RFID tags, " in Proc. 3rd Eur. Conf. Antennas Propag., Mar. 23-27, 2009, pp. 2336-2339.
17. G. Orecchini, F. Alimenti, V. Palazzari, A. Rida, M. M. Tentzeris, and L. Roselli, "Design and fabrication of ultra-low cost radio frequency identification antennas and tags exploiting paper substrates and inkjet printing technology, " IETMicrow., Antennas Propag., vol. 5, no. 8, pp. 993-1001, Jun. 6, 2011.
18. Y. Feng and L. Xie et al., "Fabrication and performance evaluation of ultralow-cost inkjet-printed chipless RFID tag, " Large-Area, Organic Printed Electron. 2012.
19. M. Mäntysalo, L. Xie, F. Jonsson, Y. Feng, A. L. Cabezas, and L.-R. Zheng, "System integration of smart packages using printed electronics, " in IEEE Proc. 62nd Electron. Compon. Technol. Conf., 2012, pp. 997-1002.
20. V. Lakafosis, A. Rida, R. Vyas, L. Yang, S. Nikolaou, and M. M. Tentzeris, "Progress towards the first wireless sensor networks consisting of inkjet-printed, paper-based RFID-enabled sensor tags, " Proc. IEEE, vol. 98, no. 9, pp. 1601-1609, Sep. 2010.
21. S. Koskinen, L. Pykari, andM. Mantysalo, "Inkjet printed flexible user interface module, " in Proc. 62nd Electron. Compon. Technol. Conf., 2012, pp. 1009-1014.
22. Q. Wan, G. Yang, Q. Chen, and L.-R. Zheng, "Electrical performance of inkjet printed flexible cable for ECG monitoring, " in IEEE 20th Electrical Performance Electron. Packag. Syst., Oct. 2011, pp. 231-234.
23. J. Chen, L. Rong, F. Jonsson, G. Yang, andL.-R. Zheng, "The design of all-digital polar transmitter based on adpll and phase synchronized modulator, " IEEE J. Solid-State Circuits, vol. 47, no. 5, pp. 1154-1164, May 2012.
24. X. Zou, X. Xu, L. Yao, and Y. Lian, "A 1-V 450-nW fully integrated programmable biomedical sensor interface chip, " IEEE J. Solid-State Circuits, vol. 44, no. 4, pp. 1067-1077, Apr. 2009.
25. Medical Instrumentation: Application and Design, J. G. Webster, Ed., 3rd ed. New York: Wiley, 1998, p. 259.
26. G. Yang, J. Chen, F. Jonsson, H. Tenhunen, and L.-R. Zheng, "A multiparameter bio-electric ASIC sensor with integrated 2-wire data transmission protocol for wearable healthcare system, " Design, Autom. Test Europe (DATE 2012), pp. 443-448, Mar. 2012.
27. Ambulatory Electrocardiographs, American National Standard ANSI/AAMI EC38:1998, 1999.
28. J. Malmivuo and R. Plonsey, Bioelectromagnetism Principles and Applications of Bioelectric and Biomagnetic Fields. New York: Oxford Univ. Press, 1995.
29. V. Kantola, J. Kulovesi, L. Lahti, R. Lin, M. Zavodchikova, and E. Coatanéa, "Printed electronics: Now and future, " Bit Bang-Rays Future, pp. 63-102, 2009.
30. J. Miettinen, V. Pekkanen, K. Kaija, P. Mansikkamäki, J. Mäntysalo, andM. Mäntysalo et al., "Inkjet printed system-in-package design and manufacturing, " Microelectron. J., vol. 39, pp. 1740-1750, 2008.
31. M. Mäntysalo, K. Kaija, S. Koskinen, and J. Niittynen, "Inkjetted 3D interconnections for electronic applications, " presented at the IMAPS Adv. Technol. Workshop Tabletop Exhibit. Printed Devices Appl., Orlando, FL, Feb. 25-27, 2009.
32. R. Vyas et al., "Inkjet printed, self powered, wireless sensors for environmental, gas, and authentication-based sensing, " IEEE Sensors J., vol. 11, no. 12, pp. 3139-3152, Dec. 2011.
33. A. Ueno and Y. Akabane et al., "Capacitive sensing of electrocardiographic potential through cloth from the dorsal surface of the body in a supine position: A preliminary study, " IEEE Trans. Biomed. Eng., vol. 54, no. 4, pp. 759-766, Apr. 2007. (Pubitemid 46469945)
34. T.-H. Kang, C.-R. Merritt, E. Grant, B. Pourdeyhimi, and H.-T. Nagle, "Nonwoven fabric active electrodes for biopotential measurement during normal daily activity, " IEEE Trans. Biomedi. Eng., vol. 55, no. 1, pp. 188-195, Jan. 2008. (Pubitemid 350308428)
35. T. Degen, S. Torrent, and H. Jackel, "Low-noise two-wired buffer electrodes for bioelectric amplifiers, " IEEE Trans. Biomed. Eng., vol. 54, no. 7, pp. 1328-1332, Jul. 2007. (Pubitemid 46956960)
36. L. Xie, G. Yang, M. Mäntysalo, F. Jonsson, and L.-R. Zheng, "A system-on-chip and paper-based inkjet printed electrodes for a hybrid wearable bio-sensing system, " presented at the 34st Annu. Int. Conf. Engineering in Medicine and Biology Society (EMBC 2012), San Diego, CA.
37. Y. M. Chi, T.-P. Jung, and G. Cauwenberghs, "Dry-contact and noncontact biopotential electrodes: Methodological review, " IEEE Rev. Biomed. Eng., vol. 3, pp. 106-119, 2010.
38. H. M. Johng, J.-H. Cho, H.-S. Shin, K.-S. Sah, T.-H. Koo, S.-Y. Choi, H.-S. Koo, andM.-S. Park, "Frequency dependence of impedances at the acupuncture point Quze (PC3), " IEEE Eng. Med. Biol. Mag., vol. 21, pp. 33-36, Mar. 2002. (Pubitemid 34477643)
39. Electrocardiography [Online]. Available: http://en. wikipedia. org/wiki/Electrocardiography
40. B. Ando and S. Baglio, "Inkjet-printed sensors: A useful approach for low cost, rapid prototyping, " IEEE Instrum. Meas. Mag., vol. 14, no. 5, pp. 36-40, Oct. 2011.
41. P. Andersson, D. Nilsson, P.-O. Svensson, M. Chen, A. Malmström, T. Remonen, T. Kugler, and M. Berggren, "Active matrix displays based on all-organic electrochemical smart pixels printed on paper, " Adv. Mater., vol. 14, pp. 1460-1464, 2002. (Pubitemid 35359302)
42. A. Rida, L. Yang, R. Vyas, and M. M. Tentzeris, "Conductive inkjetprinted antennas on flexible low-cost paper-based substrates for RFID and WSN applications, " IEEE Antennas Propag. Mag., vol. 51, no. 3, pp. 13-23, Jun. 2009.
43. F. Wang, Z.-J. Chen, L.-X. Xiao, B. Qu, and Q.-H. Gong, "Papery solar cells based on dielectric/metal hybrid transparent cathode, " Solar Energy Mater. Solar Cells, vol. 94, no. 7, pp. 1270-1274, Jul. 2010.
44. H.-Y. Tseng and V. Subramanian, "All inkjet-printed, fully self-aligned transistors for low-cost circuit applications, " Organic Electron., vol. 12, pp. 249-256, Feb. 2011.
45. M. Mäntysalo and P. Mansikkamäki, "Inkjet-deposited interconnections for electronic packaging, " in NIP23 Digital Fabricat. 2007.
46. C.-T. Lin et al., "An intelligent telecardiology system using a wearable andwireless ECG to detect atrial fibrillation, " IEEE Trans. Inf. Technol. Biomed., vol. 14, no. 3, pp. 726-733, May 2010.
47. E. Nemati, M. J. Deen, and T. Mondal, "A wireless wearable ECG sensor for long-term applications, " IEEE Commun. Mag., vol. 50, no. 1, pp. 36-43, Jan. 2012.