Machine tools for large parts

CIRP Annals - Manufacturing Technology

Volumn 62, Issue 2, 2013, Pages 731-750

  Uriarte, L ^a   Zatarain, M ^b   Axinte, D ^c   Yague Fabra J ^d   Ihlenfeldt, S ^e   Eguia, J ^a   Olarra, A ^a  

^a IK4 TEKNIKER   (Spain)

^b IDEKO Pol Industrial de Arriaga   (Spain)

^c UNIVERSITY OF NOTTINGHAM   (United Kingdom)

^d UNIVERSITY OF ZARAGOZA   (Spain)

^e FRAUNHOFER INSTITUTE FOR MACHINE TOOLS AND FORMING TECHNOLOGY IWU   (Germany)

Author keywords

Calibration; Machine tool; Portable machine

Indexed keywords

AMPLIFICATION FACTORS; CONVENTIONAL MACHINES; ENERGY CONSTRAINT; ENGINEERING PRINCIPLES; ERROR SOURCES; GENERAL ENGINEERING; LARGE DIMENSIONS; VERIFICATION AND CALIBRATIONS;

CALIBRATION;

MACHINE TOOLS;

EID: 84883248977     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2013.05.009     Document Type: Article

References (213)

1. M.R. Abdi Fuzzy Multi-Criteria Decision Model for Evaluating Reconfigurable Machines International Journal of Production Economics 117 2009 1 15
2. E. Abele, H. Hanselka, F. Haase, D. Schlote, and A. Schiffler Development and Design of an Active Work Piece Holder Driven by Piezo Actuators Production Engineering 2 4 2008 437 442
3. E. Abele, B. Kuhrke, and S. Rothenbücher Energieeffizienz von Werkzeugmaschinen Maximieren Maschinen Markt MM 9 2010 26 29
4. F. Aggogeri, A. Mazzola, and A. Merlo Multifunctional Structure Solutions for Ultra High Precision (UHP) Machine Tools International Journal of Machine Tools and Manufacture 50 2010 366 373
5. S. Aguado, D. Samper, J. Santolaria, and J.J. Aguilar Identification Strategy of Error Parameter in Volumetric Error Compensation of Machine Tool Based on Laser Tracker Measurements International Journal of Machine Tools and Manufacture 53 1 2011 160 169
6. S. Aguado, D. Samper, J. Santolaria, and J.J. Aguilar Towards an Effective Identification Strategy in Volumetric Error Compensation of Machine Tools Measurement Science and Technology 23 6 2012 065003
7. J. Albizuri, M.H. Fernandes, I. Garitaonandia, X. Sabalza, R. Uribe-Etxeberria, and J.M. Hernández An Active System of Reduction of Vibrations in a Centerless Grinding Machine Using Piezoelectric Actuators International Journal of Machine Tools and Manufacture 47 10 2007 1607 1614
8. J.M. Allen, and D.A. Axinte A Review of Recent Developments in The Design of Special Purpose Machine Tools with a View to Identification of Solutions For Portable In-Situ Machining Systems International Journal of Advanced Manufacturing Technology 50 9-12 2010 843 857
9. J.M. Allen, D.A. Axinte, and T. Pringle Theoretical Analysis of a Special Purpose Miniature Machine Tool With Parallel Kinematics Architecture: Free Leg Hexapod Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture 226 3 2012 412 430
10. Y. Altintas, and K. Erkorkmaz Feedrate Optimization For Spline Interpolation in High Speed Machine Tools Annals of The CIRP 52 1 2003 297 302
11. Y. Altintas, K. Erkorkmaz, and W.H. Zhu Sliding Mode Controller Design for High Speed Feed Drives Annals of The CIRP 49 1 2000 265 270
12. Y. Altintas, A. Verl, C. Brecher, L. Uriarte, and G. Pritschow Machine Tool Feed Drives Annals of CIRP 60 2 2011 779 797
13. S. Aoki, T. Nishimura, T. Hiroi, and S. Hirai Reduction Method for Residual Stress of Welded Joint Using Harmonic Vibrational Load Nuclear Engineering and Design 237 2 2007 206 212
14. T. Aoyama, and Y. Kakinuma Development of Fixture Devices For Thin and Compliant Workpieces Annals of the CIRP 54 1 2005 325 328
15. ARMATECNC, http://www.arcmatecnc.com/the-the-portable-gantry-nc-cutter.
16. M. Armendia, J. Madariaga, and I. Ruiz de Argandoña Axis on Axis System to Improve Machine Tool Productivity Proc. of the 9th Int. Conf. on High Speed Machining San Sebastian (Spain) 2012
17. D.A. Axinte, S. Abdul Shukor, and A.T. Bozdana An Analysis of the Functional Capability of an In-House Developed Miniature 4-Axis Machine Tool International Journal of Machine Tools and Manufacture 50 2010 191 203
18. D.A. Axinte, J.M. Allen, R. Anderson, I. Dane, L. Uriarte, and A. Olarra Free-leg Hexapod: A Novel Approach of Using Parallel Kinematic Platforms for Developing Miniature Machine Tools for Special Purpose Operations Annals of CIRP 60 1 2011 395 398
19. G. Belforte, B. Bona, E. Canuto, F. Donati, F. Ferraris, I. Gorini, S. Morei, M. Peisino, and S. Sartori Coordinate measuring machines and machine tools selfcalibration and error correction Annals of the CIRP 36 1 1987 359 362
20. A. Bilbao-Guillerna, I. Azpeitia, S. Luyckx, N. Loix, and J. Muñoa Low Frequency Chatter Suppression using an Inertial Actuator 9th International Conference on High Speed Machining 2012 61 66 ISBN: 974-84-932064-6-8
21. F. Biral, P. Bosetti, R. Oboe, and F. Tondini A New Direct Deformation Sensor for Active Compensation of Positioning Errors in Large Milling Machines 9th IEEE Int. Workshop on Advanced Motion Control, 2006 126 131
22. C. Brecher, D. Manoharan, and W. Klein Active Compensation for Portal Machines Production Engineering Research and Development 4 2010 255 260
23. C. Brecher, D. Manoharan, and S. Witt Structure Integrated Adaptronical Systems for Machine Tools Production Engineering: Research and Development 2 2008 219 223
24. C. Brecher, S. Baumler, and B. Brockmann Design of a High Dynamic Hydraulic Actuator for Active Damping Systems in Machine Tools 15th International Conference on Mechatronics Technology Melbourne 2011
25. C. Brecher, A. Schulzl, and M. Weck Electrohydraulic Active Damping System Annals of the CIRP 54 1 2005 389 392
26. C. Brecher, D. Manoharan, U. Ladra, and H.-G. Köpken Chatter Suppression with an Active Workpiece Holder Production Engineering 4 2/3 2010 239 245
27. C. Brecher, A. Guralnik, and S. Bäumler Measurement of Structure Dynamics Using a Tracking-Interferometer Production Engineering: Research and Development 6 2012 89 96
28. C. Brecher, W. Boos, W. Klein, K. Kuhlmann, and J. Triebs Ressourceneffizienzbewertung einer Werkzeugmaschine zur Steigerung ihrer Wirtschaftlichkeit Zeitschrift für wirtschaftlichen Fabrikbetrieb ZWF 104 9 2009 711 715
29. C. Brecher, and P. Hirsch Compensation of Thermo-Elastic Machine Tool Deformation Based on Control Internal Data Annals of the CIRP 53 1 2004 299 302
30. C. Brecher, and F. Hoffmann Multi-criteria Comparison of Standardised Kinematic Structures for Machine Tools Proc. of the 5th Chemnitz Parallel Kinematics Seminar 2006 65 82
31. B. Bringmann, A. Küng, and W. Knapp A Measuring Artefact for True 3D Machine Testing and Calibration Annals of the CIRP 54 1 2005 471 474
32. B. Bringmann, and W. Knapp Model-Based 'Chase-the-Ball' Calibration of a 5-Axes Machining Center Annals of the CIRP 55 1 2006 531 534
33. B. Bringmann 3D Error Compensation for Parallel Kinematics The 5th Chemnitz Parallel Kinematics Seminar 2006 531 546
34. J.B. Bryan Design and Construction of an Ultraprecision 84 Inch Diamond Turning Machine Precision Engineering 1 1 1979 13 17
35. Carnegie Mellon University ANDI Project, http://www.ri.cmu.edu/research- project-detail.html?project-id=86&menu-id=261.
36. S.L. Chen, W.M. Lin, and T.H. Chang Tracking Control for A Synchronized Dual Parallel Linear Motor Machine Tool Proceedings of the Institution of Mechanical Engineers. Part I. Journal of Systems and Control Engineering 222 8 2008 851 862
37. D. Clark, and M. Lehto S.Y. Nof, Robotics Applications in Maintenance and Repair, Handbook of Industrial Robotics 1999 Wiley and Sons New York
38. Climax Portable Machine Tools, http://www.cpmt.com.
39. A. Cowley, and A. Boyle Active Dampers for Machine Tools Annals of the CIRP 18 1 1970 213 222
40. CRAWLER - Patent ES2264850(B1) by Fatronik.
41. G.W. Cui, D. Gao, L. Wang, and Y.X. Yao Temperature Variables Selection for Thermal Error Modeling of Heavy-duty CNC Milling-Boring Machine Tools 4th Int. Conf. on High Speed Machining, Advanced Materials Research 188 2011 171 174
42. W. Cuypers, N. Van Gestel, A. Voet, J.P. Kruth, J. Mingneau, and P. Bleys Optical Measurement Techniques for Mobile and Large-scale Dimensional Metrology Optics and Laser in Engineering 47 3/4 2008 292 300
43. J. Denavit, and R.S. Hartenberg A Kinematic Notation for Lower-Pair Mechanisms Based on Matrices Transactions of the ASME: Journal of Applied Mechanics 22 1955 215 221
44. J.P. Den Hartog Mechanical Vibrations 1934 McGraw-Hill Book Company New York
45. B. Denkena, O. Gümmer, C. Will, and F. Hackelöer Compensation of Static and Dynamic Tool Deflections during Milling Processes by an Adaptronic Spindle System Intercut 2008 - 2nd Int. Conf. on Innovative Cutting Processes & Smart Machining Cluny, October 22-23 2008
46. J.M. Detriche Engin apte a se delacer sur une surface d'orientation quelconque 1986 Institute National de la Propriete Industrielle Paris no. 2607093
47. A. Dietmair, A. Verl, and M. Wosnik Zustandsbasierte Energieverbrauchsprofile: Eine Methode zur effizienten Erfassung des Energieverbrauchs von Produktionsmaschinen wt Werkstattstechnik online, 98 7 8 2008 640 645
48. M.A. Donmez, D.S. Bloquist, R.J. Hocken, and C.R. Liu A General Methodology for Machine Tool Accuracy Enhancement By Error Compensation Precision Engineering 4 1986 187 196
49. Dörries Scharmann, http://www.ds-technologie.de.
50. N.A. Duffie, and J.G. Bollinger Generation of Parametric Kinematic Error Correction Functions from Volumetric Error Measurements Manufacturing Technology 34 1 1985 435 438
51. ElectroImpact, http://www.electroimpact.com/Flextrack.
52. H.A. ElMaraghy Flexible and Reconfigurable Manufacturing Systems Paradigms International Journal of Flexible Manufacturing Systems 17 2006 261 276
53. K. Erkorkmaz, and Y. Altintas High Speed CNC System Design. Part I: Jerk Limited Trajectory Generation And Quintic Spline Interpolation International Journal of Machine Tools and Manufacture 41 9 2001 1323 1345
54. W.T. Estler, K.L. Edmundson, G.N. Peggs, and D.H. Parker Large-Scale Metrology - An Update Annals of the CIRP 51 2 2002 587 609
55. ETALON, http://www.etalon-ag.com.
56. S. Fletcher, A.P. Longstaff, and A. Myers Compensation of Thermal Errors on a Small Vertical Milling Machine 6th Int. Conf. on Laser Metrology, Machine Tool, CMM and Robot Performance 2005 432 441
57. J. Fleischer, B. Denkena, B. Winfough, and M. Mori Workpiece and Tool Handling in Metal Cutting Machines Annals of CIRP 55 2 2006 817 839
58. G.J. García, J.A. Corrales, J. Pomares, and F. Torres Survey of Visual and force/tactile, Control of Robots for Physical Interaction in Spain Sensors 9 2009 9689 9733
59. GMTK patent no WO2011101496 - Equipment for the Exchange of Replaceable Components in Machine Tools.
60. G. Goch, W. Knapp, and F. Härting Precision Engineering for Wind Energy Systems Annals of the CIRP 61 2 2012 611 635
61. H. Gross, G. Wiegaertner, and J. Hamann Electrical feed drives in automation: basics, computation, dimensioning 2001 John Wiley & Sons, Inc. Erlangen and Munich
62. S. Gsell Filterung in Werkzeugmaschinen, Seminar Vorschubantriebe für Werkzeugmaschinen 2011 13-14 December, Aachen
63. M. Guy Dispositif de deplacement et d'orientation d'une machine-util notamment de percage-rivetage sur la surface d'une piece et son procede de travail 2000 Institute National de la Propriete Industrielle Paris no 2809034
64. P. Hamelin, P. Bigras, J. Beaudry, P.L. Richard, and M. Blain Discrete-Time State Feedback With Velocity Estimation Using a Dual Observer: Application to an Underwater Direct-Drive Grinding Robot IEEE - ASME Trans. on Mechatronics 17 1 2012 187 191
65. H.N. Hansen, T. Eriksson, M. Arentoft, and N. Paldan Design Rules for Micro Factory Solutions 5th International Workshop on Microfactories (IWMF) 25-27 October, Besançon, France 2006 1 4
66. S.A. Hayati, and M.A. Mirmirani Software for Robot Geometry Parameter Estimation Robots West Conference Anaheim, CA, USA, November 1984
67. N. Hennes, and M. Queins Dörries Scharmann Technologie GmbH Machine Tools for High Performance Cutting of Aircraft Components Vancouver Conf. 2006
68. N. Hennes Ecospeed, an Innovative Machinery Concept for High Performance 5-Axis Machining of Large Structural Componenets in Aircraft Engineering 3rd Chemnitz Parallel Kynematics Seminar 2002 763 774
69. Henri Liné, http://www.hline.com/en/sections.php?pksections= 137906902.
70. Hermanos Alfaro, http://www.halfaro.com/.
71. J. Hesselbach, H. Hoffmeister, B. Schuller, and K. Loeis Development of an Active Clamping System for Noise and Vibration Reduction Annals of the CIRP 59 1 2010 395 398
72. O.I. Hernández, and E. Trapet Measurement of Systematic Geometric Errors in Coordinate Measuring Machines Proc. of ASPE 18th Annual Meeting October 26-31, Portland, OR 2003
73. HEXAPODROBOT, http://www.hexapodrobot.com/index.html.
74. J.M. Hollerbach, and C.W. Wampler The Calibration Index and Taxonomy for Robot Kinematic Calibration Methods International Journal of Robotics Research 15 6 1996 573 591
75. S.K. Hong, H. Kato, Y. Nakano, and Y. Tomita Installation of Cylindrical-Grinding Machine by Means of Load-Sensible Mounting Elements - Relationship Between Mounting Load And Dynamic Stiffness International Journal of the Japan Society for Precision Engineering 27 1 1993 73 78
76. T. Hoshi, and N. Takenaka Parameters of Mounting and Foundation Affecting the Structural Dynamics of Machine Tools Annals of the CIRP 22 1 1973 129 132
77. M.F. Hsieh, W.S. Yao, and C.R. Chiang Modeling and Synchronous Control of A Single-Axis Stage Driven by Dual Mechanically-Coupled Parallel Ball Screws International Journal of Advanced Manufacturing Technology 34 9-10 2007 933 943
78. C. Hu, B. Yao, Q. Wang, Z. Chen, and C. Li Experimental Investigation on High-Performance Coordinated Motion Control of High-Speed Biaxial Systems for Contouring Tasks International Journal of Machine Tools and Manufacture 51 9 2011 677 686
79. T. Huang, P.F. Wanga, D.G. Zhao, and D.G. Chetwynd Design of a 4-DOF Hybrid PKM Module for Large Structural Component Assembly Annals of the CIRP 59 1 2010 159 162
80. Z. Huang, and S. Hinduja Shape Optimization of a Foundation for a Large Machine Tool International Journal of Machine Tools and Manufacture 26 2 1986 85 97
81. E.B. Hughes, A. Wilson, and G.N. Peggs Design of a High-accuracy CMM Based on Multi-lateration Techniques Annals of the CIRP 49 1 2000 391 394
82. J.P. Hung Load Effect on the Vibration Characteristics of a Stage with Rolling Guides Journal of Mechanical Science and Technology 23 2003 89 94
83. IBS Precision Eng, http://www.ibspe.com/category/machine-tool- calibration/mt-check.htm.
84. ISO 230-1, Test Code for Machine Tools - Part 1: Geometric Accuracy of Machines Operating Under No-Load or Quasi-Static Conditions 2012
85. S.Y. Jeon, and K.H. Kim A Fluid Film Model for Finite Element Analysis of Structures with Linear Hydrostatic Bearings Proceedings of the Institution of Mechanical Engineers. Part C. Journal of Mechanical Engineering Science 218 3 2004 309 316
86. J. Jedrzejewski, and W. Kwasny Holistic Precision Error Model for 5 Axis HSC Machining Centre with Rotating Rolling Units in Direct Drives Procedia CIRP 4 2012 125 130
87. J. Jedrzejewski, and W. Kwasny Integrated Modelling of Axial Motion Error Sources for 5-Axis Precision Machining Centre with Direct Drives MM Science Journal November 2012 346 351
88. M. Kannan, and J. Saha A Feature-Based Generic Setup Planning for Configuration Synthesis of Reconfigurable Machine Tools International Journal of Advanced Manufacturing Technology 43 2009 994 1009
89. W. Knapp, U. Tschudi, and A. Bucher Vergleich von Prufkorpern zur Abnahme von Koordinatenmessgeräten 1990 Technische Rundschau, Hallwag Bern
90. W. Knapp Measurement Uncertainty and Machine Tool Testing Annals of the CIRP 51 1 2002 459 462
91. P.J. Koblischek Polymer Concrete as an Alternative Material for Gray Cast-Iron and Welded Steel Construction in the Machine-Tool Industry 3rd Int. Symp on Brittle Matrix Composites (BMC3) Warsaw, Poland, 17-19 September 1991
92. P. Kolar, J. Smolik, J. Sindler, and J. Hovorka An Integrated Approach to the Development of Machine Tool Structural Parts MM Science Journal 2012 (Special Issue MATAR 2012)
93. Y. Koren, U. Heisel, F. Jovane, T. Moriwaki, G. Pritschow, G. Ulsoy, and H. Van Brussel Reconfigurable Manufacturing Systems Annals of the CIRP 48 2 1999 527 540
94. B. Kuhrke, and S. Rothenbücher Vermeiden von Stand-by-Zeiten verbessert die Energieeffizienz von Maschinen Maschinen Markt MM 31 32 2008 32 34
95. H. Kunzmann, E. Trapet, and F. Waldele A Uniform Concept for Calibration, Acceptance Test, and Periodic Inspection of Coordinate Measuring Machines Using Reference Objects Annals of the CIRP 39 1 1990 561 564
96. Y.G. Li, H.T. Liu, X.M. Zhao, T. Huang, and D. Chetwynd Design of a 3-DOF PKM Module for Large Structural Component Machining Mechanism and Machine Theory 45 2010 941 954
97. D. Lin, and K.F. Ehmman Direct Volumetric Error Evaluation for Multiaxis Machines International Journal of Machine Tools and Manufacture 33 5 1993 675 693
98. Y. Lin, and Y. Shen Modelling of Five-Axis Machine Tool Metrology Models Using the Matrix Summation Approach Advanced Manufacturing Technology 21 2003 243 248
99. J.L. Liow Mechanical Micromachining: A Sustainable Micro-Device Manufacturing Approach? Journal of Cleaner Production 17 2009 662 667
100. N. Loix, and J.P. Verschueren Stand-alone Active Damping Device ACTUATOR: 9th Int. Conf. on New Actuators Bremen, Germany, June 14-16 2004
101. A.P. Longstaff, S. Fletcher, and A. Myers Volumetric Compensation Through a Siemens Controller 6th Int. Conf. on Laser Metrology, Machine Tool, CMM and Robot Performance 2005 422 431
102. LORAM, http://www.loram.com/Services/Default.aspx?id=242.
103. F.D. Ma, Y.G. Li, and Q.L. Peng Modeling Research for Active Control of Coupled Vibration between Multiple CNC Milling Machines and Flexible Foundation, Vibration, Structural Engineering and Measurement I Applied Mechanics and Materials 105 107 2012 675 679
104. A.C. Majarena, J. Santolaria, D. Samper, and J.J. Aguilar An Overview of Kinematic and Calibration Models Using Internal/External Sensors or Constraints to Improve the Behavior of Spatial Parallel Mechanisms Sensors 10 2010 10256 10297
105. A.C. Majarena, J. Santolaria, D. Samper, and J.J. Aguilar Spatial Resolution-Based Kinematic Design of a Parallel Positioning Platform International Journal of Advanced Manufacturing Technology 53 2011 1149 1165
106. P. Majda Modeling of Geometric Errors of Linear Guideway and their Influence on Joint Kinematic Error in Machine Tools Precision Engineering 36 3 2012 369 378
107. MAKINO, http://www.makino.com.
108. M.A. Mannan, and J.P. Sollie A Force Controlled Clamping Element for Intelligent Fixturing Annals of the CIRP 46 1 1997 265 268
109. O. Masory, J. Wang, and H.Q. Zhuang On the Accuracy of a Stewart Platform - Part II: Kinematic Calibration and Compensation Proc. of the IEEE Int. Conf. on Robotics and Automation Atlanta, GA, USA, 2-6 May 1993 725 731
110. H. Matzat Intelligentes Werkstückhandling Werkstatt und Betrieb 2011
111. J.R.R. Mayer Five-axis Machine Tool Calibration by Probing a Scale Enriched Reconfigurable Uncalibrated Master Balls Artefact Annals of the CIRP 61 1 2012 515 518
112. J. Mayr, J. Jedrzejewski, E. Uhlmann, M. Alkan Donmez, W. Knapp, F. Harting, K. Wendt, T. Moriwaki, P. Shore, R. Schmitt, C. Brecher, T. Warz, and K. Wegener Thermal Issues in Machine Tools Annals of the CIRP 61 2 2012 771 792
113. MAZAK, http://english.mazak.jp/technology/intelligent/its.html.
114. P.A. McKeown, and J. Loxham Some Aspects of the Design of High Precision Measuring Machines Annals of the CIRP 22 1 1973 139 140
115. Mecanizado "in-situ" Balbas, http://www.minsbal.com/.
116. Melkert, S., Grinder, Patent WO 01/49451 A1, 1999.
117. J.P. Merlet Parallel Robots 1st ed. 2000 Kluwer Academic Publishers Norwell, MA, USA
118. Mendia, A.M., Soraluce Patent EP 2 390 052 A1 System for compensating for the ram drop in a machine-tool.
119. Mirage Portable Machine Tools, http://www.miragemachines.com.
120. M. Mitsuishi, S. Warisawa, and R. Hanayama Development of an Intelligent High-Speed Machining Center Annals of the CIRP 50 1 2001 275 280
121. MIROR www.miror.eu.
122. H.-C. Möhring, K.M. Litwinski, and O. Gümmer Process Monitoring with Sensory Machine Tool Components Annals of the CIRP 59 1 2010 383 386
123. T. Moriwaki Multi-functional Machine Tool Annals of the CIRP 57 2 2008 736 749
124. MTorres www.mtorres.com.
125. J. Munoa, M. Zatarain, I. Bediaga, and R. Lizarralde Optimization of Hard Material Roughing by Means of a Stability Model 8th CIRP Modelling of Machining Operations Symposium Chemnitz 2005
126. J. Munoa, M. Zatarain, Z. Dombovari, and Y. Yang Effect of Mode Interaction on Stability of Milling Processes Proc. 12th CIRP Conf. on MMO San Sebastian, Gipuzkoa 2009
127. S. Mussa, and G. Zettl Steigerung der Energieeffizienz in der Produktion: Energieeffiziente Produktionsmaschinen. 4. Fachtagung - Energieeffiziente Fabrik in der Automobilproduktion 2011 8-9 February, Munich, Germany
128. A. Myers, D.G. Ford, and S. Barrans Finite Element Analysis of the Static Stiffness of a Foundation for Large Machine Tool 7th Int. Conf. and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance Lamdamap 27-30 June, Cranfield University 2005
129. A. Myers, S. Barrans, and D.G. Ford Structural Analysis of a Large Moving Gantry Milling Machine including its Work Support System and Foundation, Laser Metrology and Machine Performance VIII. Euspen Headquarters 2007 Cranfield University 63 72
130. A. Myers, S. Barrans, and D.G. Ford 7th Int. Symp. on Measurement Tech. and Intelligent Instruments Journal of Physics: Conference Series 13 2005 410 413 10.1088/1742-6596/13/1/094
131. A. Myers, S. Barrans, A.P. Longstaff, S. Fletcher, and D.G. Ford Evaluation and Comparison of a Large Machine Tool Structure with ISO Standard Alignment Tests, Laser Metrology and Machine Performance 2009 Euspen Ltd, Euspen Headquarters, University of Cranfield 57 66
132. Nakashima http://www.nakashima.co.jp/eng/index.html.
133. Neugebauer, H., 1979, Worm and Worm-Rack with Hydrostatic Lubrication, Waldrich Coburg Patent US 4,148,227.
134. R. Neugebauer, W.G. Drossel, S. Ihlenfeldt, and C. Harzbecker Design Method for Machine Tools with Bionic Inspired Kinematics Annals of the CIRP 58 1 2009 371 374
135. R. Neugebauer, A. Kolesnikov, M. Richter, and J. Paetzold Improvement of the Power Factor Correction in Machine Tools Proc. 14th Int. Power Electronics and Motion Control Conference EPE-PEMC vol. T13 2010 11 16
136. T. Norihisa, F. Itoigawa, T. Nakamura, and H. Nakao Development of Friction Test Apparatus for Slide-Guide Way of Machine Tool Journal of Japanese Society of Tribologists 52 9 2007 679 686
137. J.P. Odonoghu, and W.B. Rowe Design of Opposed-Pad Hydrostatic Bearings for Machine Tool Slideways Machinery and Production Engineering 116 2992 1970 407
138. G. Okahata, S. Okuyama, and A. Yui Numerical Study on Constant-Flow Hydrostatic Water Bearing for a Machine-tool Table Advances in Abrasive Technology XIV Book Series: Advanced Materials Research. 14th International Symposium on Advances in Abrasive Technology (ISAAT 2011), vol. 362 September 18-21, Stuttgart, Germany 2011 Trans Tech Publications Ltd Stafa-Zurich, Switzerland 357 362
139. Okuma http://www.okuma.co.jp/english/onlyone/thermo/index.html.
140. A. Olarra, I. Ruiz de Argandoña, and L. Uriarte New Developments in Drives and Tables. Machine Tools for High Performance Machining 2009 Springer Verlag London 139 142
141. H.J. Pahk, Y.S. Kim, and J.H. Moon A New Technique for Volumetric Error Assessment of CNC Machine Tools Incorporating Ball Bar Measurement and 3D Volumetric Error Model International Journal of Machine Tools and Manufacture 37 1997 1583 1596
142. C.H. Park, Y.J. Oh, E. Shamoto, and D.W. Lee Compensation for Five DOF Motion Errors of Hydrostatic Feed Table by Utilizing Actively Controlled Capillaries Precision Engineering 30 3 2006 299 305
143. G. Pritschow, C. Eppler, and W.D. Lehner Ferraris Sensor - The Key for advanced dynamic Drives Annals of the CIRP 52 1 2003 289 292
144. Robocrane by NIST http://www.nist.gov/el/isd/ms/robocrane.cfm.
145. Rolls-Royce Special Machine Tools 2009
146. ROPTALMU - Patent ES2335836B1 by Fatronik/Airbus.
147. I. Ruiz de Argandona, M. Zatarain, A. Illarramendi, and J.L. Azpeitia Improvement of the Performance in Machine Tools by Means of State Space Control Strategies 44th IEEE Conference on Decision and Control, European Control Conference. CDC-ECC'05 2005 3626 3631
148. Y. Sakai, and M. Tsutsumi Quantitative Evaluation Method for Damping Capacity of Linear Rolling Bearings for Feed Drive Mechanisms Emerging Tech. in Precision Engineering XIV Book Series: Key Engineering Materials vol. 523/524 2012 Transaction publishers Piscataway, NJ 656 661
149. E. Saljé, H. Gerloff, and J. Meyer Comparison of Machine Tool Elements Made of Polymer Concrete and Cast Iron Annals of the CIRP 37 1 1998 381 384
150. J. Santolaria Kinematic Parameter Estimation Technique for Calibration and Repeatability Improvement of Articulated Arm Coordinate Measuring Machines Precision Engineering 32 4 2008 251 268
151. P. Schellekens, H. Spaan, J. Soons, E. Trapet, V. Loock, J. Dooms, H. de Ruiter, and M. Maisch Development of Methods for Numerical Correction of Machine Tools Proc. of the 7th Int. Precision Engineering Seminar 1993 Springer Verlag Kobe, Japan 213 223
152. P. Schellekens, N. Rosielle, H. Vermeulen, M. Vermeulen, S. Wetzels, and W. Pril Design for Precision: Current Status and Trends Annals of CIRP 47 2 1998 557 586
153. M. Schwaar, T. Schwaar, S. Ihlenfeldt, and H. Rentzsch Mobile 5-axes Machining Centres ICMC 2010 - Sustainable Production for Resource Efficiency and Ecomobility 2010 169 184 29-30 September, Chemnitz, Germany
154. H. Schwenke, W. Knapp, H. Haitjema, A. Weckenmann, R. Schmitt, and F. Delbressine Geometric Error Measurement and Compensation of Machines Manufacturing Technology 57 2008 660 675
155. H. Schwenke, M. Franke, and J. Hannaford Error Mapping of CMMs and Machine Tools by a Single Tracking Interferometer Annals of the CIRP 54 1 2005 475 478
156. H. Schwenke, R. Schmitt, P. Jatzkowski, and C. Warmann On-the-fly Calibration of Linear and Rotary Axes of Machine tools and CMMs Using A Tracking Interferometer Annals of the CIRP 58 1 2009 477 480
157. A. Sedano, I. Ruiz de Argandoña, P. Tames, and F. Bailach Procedure for the Optimum Design of Founding and Machine Tool Supports (in Spanish) Proc. of the XVIII National Congress of Machine Tools and Manufacturing 10-12 November 2010 93 99
158. E. Shamoto, C.H. Park, and T. Moriwaki Analysis and Improvement of Motion Accuracy of Hydrostatic Feed Table Annals of the CIRP 50 1 2001 285 288
159. Z. Sienkiewicz, and B. Wilczynski Minimum-weight Design of Machine Foundation Under Vertical Load Journal of Engineering Mechanics - ASCE 119 9 1993 1781 1797
160. Z. Sienkiewicz, and B. Wilczynski Shape Optimization of a Dynamically Loaded Machine Foundation Coupled to a Semi-Infinite Inelastic Medium Structural Optimization 12 1 1996 29 34
161. M. Silvestri, P. Pedrazzoli, C. Boër, and D. Rovere Compensating High Precision Positioning Machine Tools by a Self Learning Capable Controller Proc. of the 11th Euspen Int. Conf Como, Italy 2011
162. N. Simms Vibration Absorbers for Chatter Suppression: A New Analytical Tuning Methodology Journal of Sound and Vibration 301 3-5 2007 592 607
163. Sintesi, http://www.orchestracontrol.com.
164. A.H. Slocum Precision Machine Design Society of Manufacturing Engineers 1992 61 72
165. S. Smith, B.A. Woody, and J.A. Miller Improving the Accuracy of Large Scale Monolithic Parts Using Fiducials Annals of CIRP 54 1 2005 483 487
166. J. Smolík New Emerging Materials and Structures in Field of High Speed Machine Tools Proc. 6th Int. Conf. on High Speed Machining San Sebastian, Spain 2007
167. J. Smolík, and V. Kulíšek Application of Unconventional Materials on Primary Structural Parts of Machine Tools Journal of Machine Engineering 9 2 2009 93 105
168. J. Smolík, V. Kulíšek, and M. Janota Application of Sandwich Based Design on Main Structural Parts of Machine Tools Proc. of the 6th ASME Int. Manufacturing Science and Engineering Conf USA 2011
169. D. Stoddart, and R. Holden Innovative Metrology Integrated Robot Cell "for Machining 4" Stainless Steel in the Manufacture of Nuclear Reaction Chambers" SAE AeroTech Congress Toulouse 2011
170. M. Sulitka, Z. Neusser, and J. Veselý Coupled Model of the Machine Tool Motion Axis with a Multi-Stage Tooth Gear System MM Science Journal 2012 1 6 (Special Issue MATAR 2012)
171. W. Symens, H. Van Brussel, and J. Swevers Gain-scheduling Control of Machine Tools with Varying Structural Flexibility Annals of the CIRP 53 1 2004 321 324
172. H. Tanaka, K. Tozawa, H. Sato, M. O-Hori, and H. Sekiguchi Application of a New Straightness Measurement Method to Large Machine Tool Annals of CIRP 30 1 1981 455 459
173. J. Teeuwsen, J.A. Soons, and P. Schellekens A General Method for Error Description of CMMs using Polynomial Fitting Procedures Annals of CIRP 38 1 1989 505 510
174. K. Terzaghi, R.B. Peck, and G. Mesri Soil Mechanics in Engineering Practice 3rd ed. 1996 Wiley-Interscience Publication New York
175. J. Tlusty, J. Ziegert, and S. Ridgeway Fundamental Comparison of the Use of Serial and Parallel Kinematics for Machine Tools Annals of the CIRP 48 1 1999 351 356
176. E. Trapet, J.J. Aguilar, J.A. Yagüe, H. Spaan, and V. Zelený Self-centering Probes with Parallel Kinematics to Verify Machine-Tools Precision Engineering 30 2006 165 179
177. Trapet Precision Eng. http://www.trapet.de/3D%20artefacts.html.
178. Tricept PKM, http://www.pkmtricept.com/.
179. TRITOOL, http://www.tritool.com/products-sales-and-rental.asp.
180. M. Tsutsumi, and A. Saito Identification and Compensation of Particular Deviations of 5-axis Machining Centers International Journal of Machine Tools and Manufacture 43 2003 771 780
181. TURNINGATOR from RUAG at http://www.ruag.com/en/Technology.
182. E. Uhlmanna, J. Eßmannb, and J.H. Wintering Design- and Control-Concept for Compliant Machine Tools Based on Controller Integrated Models Annals of the CIRP 61 1 2012 347 350
183. R. Umbach Problems of Stiffness and Accuracy of Large Size Machine Tools Proc. 6th International MTDR 1965 99 122
184. S. Valliappan, and A. Hakam Finite Element Analysis for Optimal Design of Foundations Due to Dynamic Loading International Journal for Numerical Methods in Engineering 52 5/6 2001 605 614
185. H. VanBrussel, and P. Van den Braembussche Robust Control of Feed Drives with Linear Motors Annals of the CIRP 47 1 1998 325 328
186. C. Villasante, A. Sedano, and M. Zatarain Development of Light and Highly Damped Structures for the Reduction of Noise and Vibration (in Spanish) Proc. of the XV National Congress of Machine Tools and Manufacturing 20-22 October 2004 559 577
187. Waldrich-Coburg Patent no EP1820600, Drill spindle for horizontal or vertical machining centre with an inner branched drive.
188. J. Wang, and O. Masory On the Accuracy of a Stewart Platform - Part I: The Effect of Manufacturing Tolerances Proc. of the IEEE Int. Conf. on Robotics and Automation Atlanta, GA, USA, 2-6 May 1993 114 120
189. M. Weck, and D. Staimer Parallel Kinematic Machines Tools - Current State and Future Potentials Annals of the CIRP 51 2 2002 671 674
190. M. Weck, and C. Brecher Werkzeugmaschinen Band 2 - Konstruktion und Berechnung 2005 Springer-VDI Berlin, Heidelberg, New York, 8 Auflage
191. A. Weckenmann, and N. Petrovic Comparison of CMM Length Measurement Tests Conducted with Different 1D, 2D and 3D Standards Proc. of 2nd Int. Scientific Conf. Metrology in Production Eng Poland 2005 113 117
192. A. Weckenmann, X. Jiang, K.D. Sommer, U. Neuschaefer-Rube, J. Seewig, L. Shaw, and T. Estler Multisensor Data Fusion in Dimensional Metrology Annals of the CIRP 58 2 2009 701 721
193. WFL Patent no AT511195, Method for Reducing the Eccentricity of the Inner and Outer Surface of a Hollow Workpiece Rotatably Clamped in a Machine Tool.
194. V. Wittstock Piezobasierte Aktor-Sensor-Einheiten zur uniaxialen Schwingungskompensation in Antriebssträngen von Werkzeugmaschinen 2007 Verlag Wissenschaftliche Scripten Zwickau
195. S.B. Xu, K.K. Sun, C.N. Jing, and G.C. Ren The Design and Optimization of Large-Scales Heavy Gantry NC Machining Center Based on Finite Element Method Advances in Materials Manufacturing Science and Technology XIV Book Series: Materials Science Forum vol. 697/698 2012 656 660
196. J.A. Yagüe, J.A. Albajez, J. Velázquez, J.J. Aguilar, M.A. Lope, and J. Santolaria Development and Calibration of Self-centring Probes for Assessing Geometrical Errors of Machines Measurement Science and Technology 20 11 2009 115103
197. Y. Yang, J. Muñoa, and Y. Altintas Optimization of Multiple Tuned Mass Dampers to Suppress Machine Tool Chatter International Journal of Machine Tools and Manufacture 50 9 2010 834 842
198. H. Yang, S. Krut, F. Pierrot, and C. Baradat Locomotion Approach of REMORA: A REonfigurable MObile Robot for Manufacturing Applications Proc. of IROS'11: IEEE/RSJ Int. Conf. on Intelligent Robots and Systems US 2011 5067 5072
199. X. Yang, L. Li, G. Liu, S. Wang, and L. Zhang Development of Measurement System on Straightness Error for Guide of Large CNC Machine Tool Advanced Science Letters 4 6/7 2011 2337 2341
200. YASDA, www.yasda.co.jp/la-English/coreTechnology/coreTechnology.htm.
201. York Portable Machines, http://www.yorkmachine.com.
202. A.M.A. Youssef, and H.A. ElMaraghy Optimal Configuration Selection for Reconfigurable Manufacturing Systems International Journal of Flexible Manufacturing Systems 19 2007 67 106
203. M. Zah, H. Rashidy, and F. Gratz Modular add-on System for Vibration Control in Gantry Milling Machines Proc. of the ASME Int. Design Engineering Tech. Conf. & Comp. & Information in Eng. Conf., 1/A-C 2005 741 745
204. S.H.H. Zargarbashi, and J.R.R. Mayer Asessment of Machine Tool Trunnion Axis Motion Error, Using Magnetic Double Ball Bar International Journal of Machine Tools and Manufacture 46 2006 1823 1834
205. M. Zatarain, I. Ruiz de Argandoña, A. Illarramendi, and J.L. Azpeitia New Control Techniques Based on State Space Observers for Improving the Precision and Dynamic Behaviour of Machine Tools Annals of the CIRP 54 1 2005 393 396
206. M. Zatarain, and J. Leizaola Improvement of the Dynamic Stiffness of Machine Tools by Adaptively Tuned Dynamic Absorbers Noise and Vibration Worlwide 29 3 1998 12 17
207. M. Zatarain, A. Mendikute, and I. Inziarte Raw Part Characterisation and Automated Alignment by Means of a Photogrammetric Approach Annals of the CIRP 61 1 2012 383 386
208. M. Zatarain, I. Bediaga, J. Muñoa, and T. Insperger Analysis of directional factors in milling: importance of multi-frequency calculation and of the inclusion of the effect of the helix angle Int, Journal of Advanced Manufacturing Technology 47 5 2010 535 542
209. G. Zhan, R. Veale, T. Charlton, B. Borchardt, and R. Hocken Error compensation of coordinate measuring machines Annals of CIRP 34 1 1985 445 448
210. G. Zhang, R. Ouyang, B. Lu, R. Hocken, R. Veale, and A. Donmez A Displacement Method for Machine Geometry Calibration Annals of the CIRP 37 1 1988 515 518
211. J. Zhang, J. Furusho, M. Uda, and T. Yamaguchi Development of a New Linear Guide System with Electrically Controllable Damper Using Liquid Crystalline Polymer International Journal of Modern Physics B 19 7-9 2005 1648 1654
212. W. Zhu, Z. Wang, and K. Yamazaki Machine Tool Component Extraction and Error Compensation by Incorporating Statistical Analysis International Journal of MTM 50 2010 798 806
213. J. Zulaika, and F.J. Campa New Concepts for Structural Components, Machine Tools for High Performance Machining 2009 Springer Verlag London 47 73