A feature-based generic setup planning for configuration synthesis of reconfigurable machine tools

International Journal of Advanced Manufacturing Technology

Volumn 43, Issue 9-10, 2009, Pages 994-1009

  Kannan, M ^a   Saha, J ^a  

^a JADAVPUR UNIVERSITY   (India)

Author keywords

Configuration synthesis; Feature enrichment; Generic setup planning; Graph theory; Reconfigurable machine tool

Indexed keywords

CONFIGURATION SYNTHESIS; FEATURE ENRICHMENT; FEATURE-BASED; GENERIC SETUP PLANNING; MACHINING FEATURE; NEW APPROACHES; PART FAMILY; RECONFIGURABLE MACHINE TOOL; RECONFIGURABLE MANUFACTURING SYSTEM; SETUP PLANNING;

COMPUTER AIDED DESIGN; GRAPH THEORY; MACHINING; REUSABILITY;

MACHINE TOOLS;

EID: 67651218856     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-008-1779-8     Document Type: Article

References (37)

1. MG Mehrabi AG Ulsoy Y Koren 2000 Reconfigurable manufacturing systems: key to future manufacturing J Intell Manuf 11 403 419 doi:10.1023/A: 1008930403506
2. Paredis CJJ, Khosla PK (1993) Synthesis methodology for task based reconfiguration of modular manipulator systems. In: Proceedings of Sixth International Symposium on Robotics Research (ISRR1993) Hidden Valley, PA
3. Y Fei J Wan P Xia 2005 Docking analysis of two neighboring modules in a self-reconfigurable modular machine Int J Adv Manuf Technol 32 985 989 doi:10.1007/s00170-006-0424-7
4. MG Mehrabi AG Ulsoy Y Koren 2000 Reconfigurable manufacturing systems and their enabling technologies Int J Manuf Technol Manage 1 1 113 130
5. YM Moon S Kota 2002 Generalized kinematic modeling of reconfigurable machine tools J Mech Des 124 47 54 doi:10.1115/1.1424892
6. YM Moon S Kota 2002 Design of reconfigurable machine tools J Manuf Sci Eng 124 480 483 doi:10.1115/1.1452748
7. Landers RG (2000) A new paradigm in machine tools: reconfigurable machine tools. In: 2000 Japan-USA Symposium on Flexible Automation, July 23-26, Ann Arbor, MI
8. N Kaya F Rk 2001 Algorithms for grouping machining operations and planning workpiece location under dynamic machining conditions Int J Prod Res 39 15 3329 3351 doi:10.1080/00207540110060590
9. Y Koren U Heisel F Joveane 1999 Reconfigurable manufacturing systems Ann CIRP 48 2 527 540
10. Katz R, Chung H (2000) Design of an experimental reconfigurable machine tool. In: Japan-USA Symposium on Flexible Automation Ann Arbor Michigan
11. R Katz 2006 Design principles of reconfigurable machines Int J Adv Manuf Technol 34 430 439 doi:10.1007/s00170-006-0615-2
12. Pérez RR, Aca SJ, Valverde TA et al (2004) A modularity framework for concurrent design of reconfigurablemachine tools. In: Luo Y (ed) CDVE LNCS. vol. 3190. Springer, Berlin, pp 87-95
13. Riba RC, PÂorez RR, SÂnchez AJL et al (2005) A concurrent approach to design of reconfigurable machine tools to process bamboo. In: Luo Y (ed) CDVE LNCS. vol. 3675. Springer, Berlin, pp 210-217
14. Ahuett H, Aca J, Molina A (2005) A directed evolution modularity framework for design of reconfigurablemachine tools. In: Luo Y (ed) CDVE LNCS. vol. 3675. Springer, Berlin, pp 243-252
15. Bi ZM, Lang SYT, Verner M et al (2007) Development of reconfigurable machines. Int J Adv Manuf Technol doi: 10.1007/s00170-007-1288-1
16. H Shinno Y Ito 1987 Computer aided concept design for structural configuration of machine tools: variant design using direct graph Trans ASME 109 372 376
17. FC Chen H Yan 1999 Configuration synthesis of machining centres with tool change mechanisms Int J of Mac Tools Manuf 39 273 295
18. Seo Y, Him T, Sheen D et al (2005) Structure modeling of machine tools and internet-based implementation. In: Proceedings of the 2005 Winter Simulation Conference, pp 1699-1704
19. AK Dash IM Chen 2005 Task-oriented configuration design for reconfigurable parallel manipulator systems Int J Compt Integr Manuf 18 7 615 634 doi:10.1080/09511920500069192
20. LI Chen XI Fengfeng A Macwan 2005 Optimal module selection for preliminary design of reconfigurable machine tools Trans ASME 127 104 115
21. Heisel U, Meitzner M (2003) Progress in reconfigurable manufacturing systems. In: CIRP Second International Conference on Reconfigurable Manufacturing Systems, Ann Arbor, MI
22. L Wang N Cai HY Feng 2006 Enriched machining feature-based reasoning for generic machining process sequencing Int J Prod Res 44 8 1479 1501 doi:10.1080/00207540500354119
23. Gaoliang P, Liu W, Zhang Y (2005) Intelligent setup planning in manufacturing by fuzzy set theory based approach. In: Proceedings of the 2005 IEEE International Conference on Automation Science and Engineering, Edmonton, Canada
24. Y Zhang W Hu Y Rong 2001 Graph-based setup planning and tolerance decomposition for computer-aided fixture design Int J Prod Res 39 14 3109 3126 doi:10.1080/00207540110056171
25. YJ Tseng 1999 Fixturing design analysis for successive feature-based machining Comput Ind 38 249 262 doi:10.1016/S0166-3615(98)00095-5
26. SK Ong J Ding AYC Nee 2002 Hybrid GA and SA dynamic set-up planning optimization Int J Prod Res 40 4697 4719 doi:10.1080/00207540210155864
27. HC Zhang E Lin 1999 A hybrid-graph approach for automated setup planning in CAPP Robot Compt Integ Manuf 15 89 100 doi:10.1016/S0736-5845(98)00031-3
28. G Cevdet 2004 Machine capability and fixturing constraints imposed automatic machining setups generation J Mat Proc Tech 148 83 92
29. S Yao X Han Y Yang 2005 Computer aided manufacturing planning for mass customization: part 2, automated setup planning Int J Adv Manuf Technol 32 205 217 doi:10.1007/s00170-005-0328-y
30. Wang L, Zhao W, Ma'ruf A et al (1996) Set-up less fabrication technology incorporated with machining feature-based CAD/CAM system for low volume and high product-mix machining center. In: Workshop Proceedings of IMEC 1996, pp 95-97
31. K Nehez T Csaki 2003 Cutting force modeling possibilities in open GL based milling simulators Prod Sys Inf Eng Miskolc 1 29 39
32. Rong Y, Han X (2003) Computer-aided reconfigurable fixture design. In: Proceedings of the CIRP Second International Conference on Reconfigurable Manufacturing
33. Harary F (1995) Graph theory, 1st edn. Narosa, New Delhi (7th reprint)
34. Model ML (1994) Data structures, data abstraction: contemporary introduction using c++. Prentice Hall, Upper Saddle River
35. D Kiritsis M Porchet 1996 A generic Petri net model for dynamic process planning and sequence optimization Adv Eng Softw 25 61 71 doi:10.1016/0965- 9978(95)00086-0
36. AMA Youssef HA Elmaraghy 2006 Modelling and optimization of multiple-aspect RMS configurations Int J Prod Res 44 22 4929 4958 doi:10.1080/00207540600620955
37. Kumar A (2005) Some aspects of feature based modeling and automatic feature recognition for computer aided process planning. Ph.D. thesis, Jadavpur Univerity India