Thermal issues in machine tools

CIRP Annals - Manufacturing Technology

Volumn 61, Issue 2, 2012, Pages 771-791

  Mayr, Josef ^a,b   Jedrzejewski, Jerzy ^c   Uhlmann, Eckart ^d   Alkan Donmez, M ^e   Knapp, Wolfgang ^b   Härtig, Frank ^f   Wendt, Klaus ^f   Moriwaki, Toshimichi ^g   Shore, Paul ^h   Schmitt, Robert ⁱ   Brecher, Christian ⁱ   Würz, Timo ^j   Wegener, Konrad ^b  

^a MANAGEMENT CENTER INNSBRUCK   (Austria)

^b ETH ZURICH   (Switzerland)

^c WROCLAW UNIVERSITY OF TECHNOLOGY   (Poland)

^d TECHNISCHE UNIVERSITÄT BERLIN   (Germany)

^e NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^f PHYSIKALISCH TECHNISCHE BUNDESANSTALT   (Germany)

^g Setsuan University   (Japan)

^h Precision Engineering Centre   (United Kingdom)

ⁱ RWTH AACHEN UNIVERSITY   (Germany)

^j VDMA   (Germany)

more..

Author keywords

Compensation; Machine tool; Thermal error

Indexed keywords

INFLUENCE OF FLUID; MACHINE TOOL PERFORMANCE; MEASUREMENT OF TEMPERATURE; RESEARCH ACTIVITIES; RESEARCH CHALLENGES; STATE OF THE ART; THERMAL CONDITION; THERMAL ERROR;

COMPENSATION (PERSONNEL); ENERGY EFFICIENCY; ERROR COMPENSATION; MEASUREMENT ERRORS; METAL CUTTING; RESEARCH;

MACHINE TOOLS;

EID: 84865702007     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2012.05.008     Document Type: Article

References (208)

1. E. Abele Machine Tool Spindle Units CIRP Annals - Manufacturing Technology 59/2 2010 781 802
2. Archenti, A., 2011, A Computational Framework for Control of Machining systems Capability - From Formulation to Implementation, PhD Thesis, KTH Royal Institute of Technology, Stockholm, Sweden, ISBN 978-91-7501-162-2.
3. F. Bayer-Helms Längenstabilität bei Raumtemperatur von Proben der Glaskeramik Zerodur Metrologia 21 2 1985 49 57 (Pubitemid 15530387)
4. A. Blazejewski Modelling Thermal Deformation of Tilting Rotary Table with Direct Drive System Journal of Machine Engineering 10 4 2010 18 32 ISSN 1895-7595
5. Bonse, R., 1998, Thermisches Last-Verformungsverhalten von Werkzeugmaschinen, Diss. RWTH Aachen. ISBN 3-8265-6102-3.
6. R. Bonse, and M. Weck Indirekte Kompensation Thermo-elastischer Verlagerungen bei Einwirkung mehrerer Wärmequellen 1994 VDW 8493
7. J. Bosch, and J. Bryan Chapter 8, Temperature Fundamentals Coordinate Measuring Machines and Systems 1995 Marcel Dekker Inc.
8. B. Bossmanns A Thermal Model for High Speed Motorized Spindles International Journal of Machine Tools and Manufacture 93 1999 1345 1366
9. C. Brecher Messtechnische Untersuchung des thermoelastischen Verlagerungsverhaltens von Werkzeugmaschinen, 11 Dresdner WZM-Fachseminar 2006
10. C. Brecher Interaction of Manufacturing Process and Machine Tool Annals of the CIRP 58 2 2009 588 607
11. C. Brecher Modelling of Thermal Behaviour of a Milling Machine Due to Spindle Load 12th CIRP Conference on Modelling of Machining Operations, vol. 2 2009 673 678 ISBN 978-84-608-0866-4
12. C. Brecher Optimierung des thermischen Verhaltens von Fräsmaschinen Zeitschrift für wirtschaftlichen Fabrikbetrieb 104 2009 437 444
13. C. Brecher Compensation of Thermo-depend Machine Tool Deformations Due to Spindle Load Based on Reduced Experimental Procedure and Modelling Effort - Synthesis Between Direct and Indirect Compensation Eighth International Conference on High Speed Machining 2010 978-2-9534170-2-9 pp. S.89-S.95
14. C. Brecher Compensation of Thermo-Dependent Machine Tool Deformations Due to Spindle Load Based on Reduced Modeling Effort 14th International Conference on Mechatronics Technology (ICMT 2010) Icho-kaikan 2010 S.295 S.302
15. C. Brecher Thermisch bedingtes Verformungsverhalten von Fräsmaschinen VDI-Z 152 9 2010 78 81
16. Brecher, C., et al, (2009) Stressing Unit for Modelling of Thermal Behaviour of a Milling Machine, 12th CIRP Conference on Modelling of Machining Operations, vol. 2, 727-730. ISBN 978-84-608-0866-4.
17. C. Brecher, and P. Hirsch Compensation of Thermo-elastic Machine Tool Deformation Based on Control internal Data Annals of the CIRP 53 1 2004 299 304
18. C. Brecher, and P. Hirsch Kompensation thermoelastischer Verlagerungen, 11 Dresdner Werkzeugmaschinen-Fachseminar 2006
19. C. Brecher, and A. Wissmann Messtechnische Untersuchung des thermoelastischen Verlagerungsverhaltens von Werkzeugmaschinen, 11 Dresdner Werkzeugmaschinen-Fachseminar 2006
20. C. Brecher, and S. Witt Static, Dynamic and Thermal Behaviour of Machine Tools with Regard to HPC High-Performance Cutting 2004 227 242
21. J. Bryan International Status of Thermal Error Research Annals of the CIRP 16 2 1969 203 215
22. J. Bryan Thermal Effects in Dimensional Metrology 1965 ASME 65-PROD-13
23. J. Bryan Expansion of a Cutting Tool During Chip Removal Annals of the CIRP 16 1 1967 49 52
24. J. Bryan A Practical Solution to the Thermal Stability Problem in Machine Tools 1978 SME, MR-72-138
25. Bryan, J., et al., 1982, An Order of Magnitude Improvement in Thermal Stability with the Use of Liquid Shower on a General Purpose Measuring Machine, SME Precision Machining Workshop, UCRL-87591.
26. J. Bryan Shower and High-Pressure Oil Temperature Control Annals of the CIRP 35 1 1986 359 364
27. J. Bryan International Status of Thermal Error Research Annals of the CIRP 39 2 1990 645 656
28. K. Buchman, and G. Jungnickel Die Wärmeubertragung an Be-und Verarbeitungmaschinen, PWR vol. 20 1978 Wroclaw, ITMiA p. 279
29. Carlisle, K., 1996, Design, Build and Development of an Ultra Precision Machining Facility, MSC Thesis, Cranfield.
30. C.W. Chang Dynamic Model Based ion Genetic Algorithms of Prediction for the Thermal Deformation of Machine Tools Materials Science Forum 505-507 2005 163 168
31. M. Chapman Limitations of Laser Diagonal Measurements Precision Engineering 27 4 2003 401 406
32. J.S. Chen Neural Network-based Modelling and Error Compensation of Thermally-induced Spindle Errors International Journal of Advanced Manufacturing Technology 12 1996 303 308
33. J.S. Chen Quick Testing and Modelling of Thermally-induced Errors on CNC Machine Tools International Journal of Machine Tools and Manufacture 35 7 1995 1063 1074
34. J.S. Chen Characterization and Models for Thermal Growth of a Motorized High Speed Spindle International Journal of Machine Tools and Manufacture 43 2003 1163 1170
35. T.Y. Chen Optimum Design of Headstocks of Precision Lathes International Journal of Machine Tools and Manufacture 39 1999 1961 1977
36. C. Chou Liquid Temperature Control for Precision Tools Annals of the CIRP 39 1 1990 535 543
37. P.E. Ciddor Refractive Index of Air - New Equations for the Visible and Near Infrared Applied Optics LP 35 9 1996 1566 1572 (Pubitemid 126620362)
38. D.B. DeBra Shower and High Pressure Oil Temperature Control CIRP Annals 35 1 1986 359 363
39. Dehaes, J., 1998, Studie over de Thermische Beinvloeding van de Bewerkingsnauwkeurigheit van een Freesmachine, Diss. K.U. Leuven.
40. F.M.L. Delbressine Modelling Thermo-mechanical Behaviour of Multi Axis Machine Tools Precision Engineering 30 1 2006 47 53
41. B. Denkena Kompensation thermischer Verlagerungen Werkstatttechnik Online 97 11-12 2007 913 917
42. B. Denkena Sensitivitätsanalyse für ein Simulationsmodell Werkstatttechnik Online 99 5 2009 294 299
43. P. Dobrinski Physik für Ingenieure 2006 Teubner Verlag 978-3-8351-0020-6
44. M.A. Donmez A General Methodology for Machine Tool Accuracy Enhancement by Error Compensation Precision Engineering 8 4 1986 187 196 (Pubitemid 17527325)
45. M.A. Donmez A Novel Cooling System to Reduce Thermally-Induced Errors of Machine Tools Annals of the CIRP 56 1 2007 21 524
46. D. Dornfeld Precision Manufacturing 2009 Springer New York 978-1441940841
47. M. Ess Thermal Displacements of Rotary Axes Annual Meeting MTTRF 2011
48. W. Eversheim 100 Jahre Produktionstechnik: Werkzeugmaschinenlabor WZL der RWTH Aachen von 1906 bis 2006 2006 978-3540333159
49. G.H.J. Florussen Assessing Thermally Induced Errors of Machine Tools by 3D Length Measurements Annals of the CIRP 52 1 2003 333 336
50. M. Franke Measuring Large 3D Structures Using a Portable 4-arm Laser Interferometer Advances in Metrology 2010 35 42
51. S. Fraser Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 1: Concept of Generalized Modelling Journal of Manufacturing Science and Engineering 120 1998 623 631 (Pubitemid 128651846)
52. S. Fraser Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 2: Generalized Transfer Functions Journal of Manufacturing Science and Engineering 120 1998 632 639 (Pubitemid 128651847)
53. S. Fraser Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 3: Real-Time Estimation of Heat Sources Journal of Manufacturing Science and Engineering 121 1999 501 508
54. S. Fraser Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 4: A Multi-Variable Closed-Loop Control System Journal of Manufacturing Science and Engineering 121 1999 509 516
55. S. Fraser Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures, Part 5: Experimental Verification Journal of Manufacturing Science and Engineering 121 1999 517 523
56. A.O. Gibson A linear Observer Based Approach for Estimation Spindle Bearing Loads Proceedings of the ASME Dynamic Systems and Control Division 1996 251 258
57. T. Gim Ball Screw as Thermal Error Compensator Proceedings form ASPE Annual Meeting 2001
58. S. Gleich Approach for Simulating Ball Bearing Screws in Thermal Finite Element Simulation Journal of Machine Engineering 7 1 2007 101 107
59. A. Gontarz Energy Consumption Measurement with a Multichannel Measurement System on a Machine Tool Intech 2010 1 6
60. G. Grossmann Thermisches Verhalten veränderlicher Strukturen Konstruktion 50 6 1998 27 31
61. K. Grossmann, and G. Jungnickel Genauigkeitssteigerung an Werkzeugmaschinen Zeitschrift für wirtschaftlichen Fabrikbetrieb 94 6 1999 320 323
62. K. Grossmann, and G. Jungnickel Instationäres thermoelastisches Verhalten von Vorschubachsen mit bewegtem Wälzkontakt 2003 3-86005-381-7
63. K. Grossmann, and G. Jungnickel Prozessgerechte Bewertung des thermischen Verhalten von Werkzeugmaschinen 2006 3-86005-547-X
64. K. Grossmann, and G. Jungnickel Thermisch Modellierung von Prozesseinflüssen an spannenden Werkzeugmaschinen 2008 978-3-86780-089-1
65. Hahn, M.H., et al., 2006, Evaluation of an Inexpensive Method to Stabilize the Temperature of Machine Tool Components, National Institute of Standards and Technology Internal Report, NISTIR 7292.
66. U. Heisel Wärmeübertragungsbedingungen an Werkzeugmaschinenwänden Dima 4 2003 24 27
67. U. Heisel Thermography-Based Investigation into Thermally Induced Positioning Errors of Feed Drives By Example of a Ball Screw Annals of the CIRP 55 1 2006 423 426 (Pubitemid 44578446)
68. U. Heisel Modelling of Interaction Processes in Cutting Proceedings of 2nd International Conference on Process Machine Interactions 2010 978-0-9866331-0-2
69. K.D. Henneke Thermisch geeicht-präziser gefertigt Technica 7 2007 38 39
70. U. Herbst Kompensation thermoelastischer Verlagerungen an Werkzeugmaschinen Schleiftechnisches Kolloquium 2000 135 145
71. Herbst, U., 2002, Analyse und Kompensation thermoelastischer Verlagerungen, Diss. RWTH Aachen.
72. E. Hoffmann Konvektiver Wärmeübergang an Werkzeugmaschinen- Bauteilen Industrie-Anzeiger 9 1988 30 31
73. T. Holkup Thermo-mechanical Model of Spindles CIRP Annals - Manufacturing Technology 59 1 2010 265 268
74. O. Horejs Determination of Positioning Error of Feed Axes Due to Thermal Expansion by Infrared Thermography ATEM'07, JSME-MMD, September, 12-14 2007
75. O. Horejš A Compensation Technique of Machine Tool Thermal Errors Built on Thermal Transfer Functions Proceedings of 5th International Conference on Leading Edge Manufacturing in 21st Cent Osaka, Japan 2009 197 202
76. O. Horejš Compensation of Machine Tool Thermal Errors Based on Transfer Functions Modern Machinery (MM) Science Journal 2010 162 165
77. J. Hornych Issues in Identification of Thermal Transfer Functions of Machine Tools Proceedings of 9th EUSPEN 2009 451 454
78. J. Hornych Thermomechanical Transfer Functions and Control of a Machine Tool Cooling System Modern Machinery (MM) Science Journal 2009 96 97
79. D. Hou A Novel FEA Model for the Integral Analysis of a Machine Tools and Machining Processes Key Engineering Materials 257-258 2004 45 50
80. Y. Huang Optimisation of Fixture Design with Consideration of Thermal De-formation in Face Milling Transactions of NAMSRI/SME 27 1999 322 340
81. ISO 1 Geometrische Produktspezifikation (GPS) - Referenztemperatur für die Geometrische Produktspezifikation und-prüfung 2002 Verein Schweizer Maschinen-Industrielle Zürich
82. ISO 10791-10, 2007, Test Conditions for Machining Centres - Part 10: Evaluation of Thermal Distortion, Genf, Schwitzerland.
83. ISO 13041-8, 2004, Test Conditions for Numerically Controlled Turning Machines and Turning Centres - Part 8: Evaluation of Thermal Distortions, Genf, Schwitzerland.
84. ISO 230-3, 2007, Test Code for Machine Tools - Part 3: Determination of Thermal Effects, Genf, Schwitzerland.
85. S. Itho Behavior of Interface Pressure Distribution in a Single Bolt-Flange Assembly Subjekt to Heat Flux Journal of Engineering for Industry 114 1992 231 236
86. Y. Ito Thermal Deformation in Machine Tools 2010 Mcgraw Hill Book Co. 978-0071635172
87. J. Jedrzejewski Kompensation thermischer Verlagerungen einer Drehmaschine Werkstatt und Betrieb 118 1985 85 87 (Pubitemid 16477643)
88. J. Jedrzejewski Effect of the Thermal Contact Resistance on Thermal Behaviour of the Spindle Radial Bearings International Journal of Machine Tools and Manufacture 28 4 1988 409 416
89. J. Jedrzejewski Zur Erwärmung von Drehmaschinen-Spindelkästen vol. 4 1973 WZM International pp. 47-50
90. J. Jedrzejewski Wärmeübergangsverhältnisse an Spindelkästen von Drehmaschinen Industrieanzeiger 99 74 1977 1436 1439
91. J. Jedrzejewski Description of the Forced Convection along the Walls of Machine-tool Structures Annals of the CIRP 37 1 1988 397 400
92. J. Jedrzejewski Beurteilung der Berechnungsmethode für die Bestimmung der Energieverluste in Wälzlagern Schmierungstechnik 20 1989 243 244
93. J. Jedrzejewski Numerical Optimization of Thermal Behaviour of Machine Tools Annals of the CIRP 39 1 1990 379 382
94. J. Jedrzejewski Numerical Modelling of the Thermal Behaviour of Spindle Bearing Assemblies for Precise Machine tools Proceedings of the CIRP Conference on PE&MS 1991 7-5618-0280-3 pp. 525-536
95. J. Jedrzejewski A new Approach to Modelling Thermal Behaviour of a Machine Tool under Service Conditions Annals of the CIRP 41 1 1992 455 458 (Pubitemid 23568180)
96. J. Jedrzejewski Thermal Displacements Compensation of Manufacturing Cells Using a Universal Correcting Temperature Function Proceedings of CSME Forum 1992 675 680
97. J. Jedrzejewski Directions in Improving Thermal Behaviour of Spindle Bearing Assemblies in FMS Moduls Manufacturing Systems 23 4 1994 317 322
98. J. Jedrzejewski Artificial Intelligence Tools in Diagnostics of Machine Tool Drives Annals of the CIRP 45 1 1996 411 414 (Pubitemid 126601478)
99. J. Jedrzejewski Thermisches Verhalten von Werkzeugmaschinen-Gestellen Industrie Anzeiger 99 65 1996 1243 1245
100. J. Jedrzejewski An Approach to Integrating Intelligent Diagnostics and Supervision of Machine Tools Journal of Intelligent Manufacturing 9 1998 295 302 (Pubitemid 128596983)
101. J. Jedrzejewski Hybrid Model of High Speed Machining Centre Headstock CIRP Annals - Manufacturing Technology 53 1 2004 285 288
102. J. Jedrzejewski High-speed Precise Machine Tools Spindle Units Improving Journal of Materials Processing Technology 162-163 2005 615 621 (Pubitemid 40584445)
103. J. Jedrzejewski Numerical Analyses and Compensation of HSC Machine Tools Thermal Displacements pp. 268-275 Proceedings Lamdamap, vol. 7 2005 1861941188
104. J. Jedrzejewski Precise Modelling of HSC Machine Tool Thermal Behaviour Journal of Achievements in Materials and Manufacturing Engineering 24 1 2007 245 252
105. J. Jedrzejewski Operational Behaviour of High Speed Spindle Unit Modern Machinery (MM) Science Journal 10 2008 40 43 ISSN 1803-1269 or 1085-0476
106. J. Jedrzejewski Precise Model of HSC Machining Centre for Aerospace Parts Milling Journal of Mechanical Engineering 8 3 2008 29 41
107. J. Jedrzejewski, and W. Kwasny Modelling of Angular Contact Ball Bearings and Axial Displacements for High-speed Spindles CIRP Annals - Manufacturing Technology 59 1 2010 377 382
108. J. Jedrzejewski, and W. Kwasny Study on Reducing Energy Consumption in Manufacturing Systems Journal of Machine Engineering 11 3 2011 7 20
109. C. Jin Wavelet Neural Network Based on NARMAL2 Model for Prediction of Thermal Characteristics in a Feed System Chinese Journal of Mechanical Engineering 23 2010
110. B.R. Jorgensen Dynamic of Machine Tool Spindle/Bearing System Under Thermal Growth Proceedings of the ASME Dynamic Systems and Control Division 1996 333 340
111. G. Jungnickel Simulation des thermischen Verhaltens von Werkzeugmaschinen 2000 Lehre Forschung Praxis
112. G. Jungnickel Thermische Simulation von Werkzeugmaschinen 2000 Lehre Forschung Praxis
113. G. Jungnickel Modellgestützte Kompensation von thermisch bedingten Verlagerungen in Echtzeitfähigkeit AG Struktur und Prozessanalyse 2006 147 149
114. G. Jungnickel Prozessgerechte Bewertung des thermischen Verhaltens von Werkzeugmaschinen AG Struktur und Prozessanalyse 2006 138 140
115. Y. Kang Modification of a Neural Network Utilizing Hybrid Filters for the Compensation of Thermal Deformation in Machine Tools International Journal of Machine Tools and Manufacture 47 2007 376 387 (Pubitemid 44738465)
116. J.J. Kim Thermal Behaviour of a Machine Tool Equipped with Linear Motors International Journal of Machine Tools and Manufacture 44 2004 749 758
117. K.D. Kim Real Time Compensatory Control of Thermal Errors for High Speed Machine Tools Proceedings of Instn. Mech. Enrs, 218, Part B, Engineering Manufacture 2004 913 924
118. S.K. Kim Real-time Estimation of Temperature Distribution in a Ball-screw System International Journal of Machine Tools and Manufacture 37 1997 451 464 (Pubitemid 127412202)
119. S.M. Kim Prediction of Thermo-elastic Behaviour in a Spindle-bearing Surroundings International Journal of Machine Tools and Manufacture 41 2001 809 831
120. S.M. Kim Effect of Bearing Surroundings on the High-Speed Spindle-Bearing Compliance Advanced Manufacturing Technologies 19 2002 551 557
121. S.M. Kim Spindle Housing Design Parameter Optimization Considering Thermo-Elastic Behaviour International Journal of Advanced Manufacturing Technology 25 2005 1061 1070
122. T.J. Ko Particular Behaviour of Spindle Thermal Deformation by Thermal Bending International Journal of Machine Tools and Manufacture 43 2003 17 23 (Pubitemid 35385281)
123. P. Kohút The Influence of Convective Boundary Condition on Thermal-Deformation State of Machine Tool (in Czech) Vysoké učení technické v Brně 2010 21 27
124. J. Konvica Simulation, Experimental Investigation and Control of Thermal Behavior in Modular Tool Systems 2004 Nonlinear Dynamics of Production Systems pp. 265-285
125. Koscsak, G., 2007, Ermittlung des instationären thermischen Verhaltens von Vorschubachsen mit Kugelgewindetrieb mit Hilfe der Verarbeitung thermographischer Messdaten, Diss. Universität Stuttgart. ISBN 978-3-00-0236372.
126. J.P. Kruth Compensation of Static and Transient Thermal Errors on CMMs Annals of the CIRP 50 1 2001 377 380
127. J.H. Lee Development of Thermal Error Model with Minimum Number of Variables Using Fuzzy Logic Strategy KSME International Journal 15 11 2001 1482 1489
128. K.-J. Lee Repeatability Analysis on the Tool Point Dynamics for Investigation on Uncertainty in Milling Stability ASME Conference Proceedings IMECE2007, vol. 3 2007 477 485 ISBN 0-7918-4297-5 or 978-0-7918-4297-3
129. H. Li Analysis of Bearing Configuration Effects on High Speed Spindles Using an Integrated Dynamic Thermo-mechanical Spindle Model International Journal of Machine Tools and Manufacture 44 2004 347 364
130. H. Li Integrated Dynamic Thermo-mechanical Modelling of High Speed Spindles Part1: Model Development Journal of Manufacturing Science and Engineering 126 2004 148 158
131. H. Li Integrated Dynamic Thermo-mechanical Modelling of High Speed Spindles Part 2: Solution Procedure and Validation Journal of Manufacturing Science and Engineering 126 2004 159 168
132. S. Li A study of Pre-compensation for Thermal Errors of NC ma-chine Tools International Journal of Machine Tools and Manufacture 37 1997 1715 1719 (Pubitemid 127382405)
133. D. Luttrel Tutorial on Fundamentals of Thermal Effects: Precision Design Principles, Measurement und Control of Temperatures ASPE Annual Meeting 2007
134. M. Maisch Software korrigiert geometrische und thermische Fehler Werkstatt und Betrieb 126 11 1993 691 694
135. M.A. Mannan Investigation into Temperature Dependence of Motor Current Measurements Applied to Monitoring and Adaptive Control Annals of the CIRP 41 1 1992 451 454 (Pubitemid 23568181)
136. M. Mareš Application of Mechatronic Approach to Modelling, Identification and Control of Machine Tool Thermal Errors Proceedings of 29th IASTED International. Conf. Mod. 2010 ISBN 978-0-88986-833-5
137. Mayr, J., 2010, Beurteilung und Kompensation des Temperaturgangs von Werkzeugmaschinen, Diss. ETH Zurich.
138. J. Mayr Comparing the Thermo-mechanical Behaviour of ma-chine Tool Frame Designs Using a FDM - FEM Simulation Approach Proceedings ASPE Annual Meeting 2007 17 20
139. J. Mayr Nützen thermische Messungen auf Werkzeugmaschinen? MB-Revue 2007 110 117
140. J. Mayr Simulation and Prediction of the Thermally Induced Deformations of Machine Tools Caused by Moving Linear Axis Using the FDEM Simulation Approach Proceedings ASPE Annual Meeting 2008
141. J. Mayr Calculating thermal location and component errors on machine tools Proceedings ASPE Annual Meeting 2009 ISBN 978-1-887706-55-1
142. J. Mayr Compensation of Thermal Effects on Machine Tools using a FDEM Simulation Approach Proceedings Lamdamap, vol. 9 2009 ISBN 1861941188
143. J. Mayr Comparing Different Cooling Concepts for Ball Screw Systems Proceedings ASPE Annual Meeting 2010 ISBN 978-1-887706-55-1
144. J. Mayr Thermal behaviour improvement of linear axis Proceedings of 11th euspen International Conference, V1 2011 291 294
145. E. McClure, and R. Watts Thermal Expansion of the Workpiece During Turning ASME Winter Meeting, 68-WA/PROD-24 1968
146. M. Mitsuishi Development of an Intelligent High-Speed Machining Centre Annals of the CIRP 50 1 2001 275 280 (Pubitemid 32610824)
147. P. Morantz Precision grinding for rapid fabrication of segments for extremely large telescopes using the Cranfield BoX Proceedings SPIE 7739 2010 773905
148. M. Mori Design Optimization and Development of CNC Lathe Headstock to Minimize Thermal Deformation Annals of the CIRP 58 1 2009 331 334
149. T. Moriwaki Thermal Deformation and Its On-Line Compensation of Hydrostatically Supported Precision Spindles Annals of the CIRP 37 1 1988 393 396
150. T. Moriwaki Analysis of Thermal Deformation of an Ultraprecision Air Spindle System Annals of the CIRP 47 1 1998 315 319 (Pubitemid 128564739)
151. T. Moriwaki Estimation of Thermal Deformation of Machine Tool by Applying Neural Network Transactions of JSME, C 61 584 1995 1691 1696
152. T. Moriwaki Prediction of Thermal Deformation of Machine Tool with Strain Sensor Manufacturing Science and Technology, ASME, MED 6/1 1997 137 142 (Pubitemid 127649290)
153. T. Moriwaki Development of an Intelligent Turning Machine Equipped with Open-Architecture CNC Controller to Compensate Thermal Deformation of Machine Tool Proc. CIRP Sponsored International Seminar on Improving Machine Tool Performance San Sebastian 1998 317 325
154. W. Niemeier Ausgleichungsrechnung 2008 978-3-11-019055-7 426 ff
155. R. Neugebauer Thermozelle zur Untersuchung des thermischen Verhaltens von Maschinen Maschinenmarkt. MM, das Industriemagazin 104 40 1998 34 37
156. R. Neugebauer Optimization of Thermal Behavior of machine Tools with Separated Machine Bed Components Production Engineering VIII 1 2001 137 140
157. R. Neugebauer A modelling approach to optimize the thermal behavior of machine tool components Production Annals of the German Academy of Society for Production Engineering 9 1 2002 131 134
158. R. Neugebauer Mechatronic Systems for Machine Tools Annals of the CIRP 56 2 2007 656 686
159. R. Neugebauer Improving the Precision by Thermal Simulation ATZproduktion 03-04 2 2009 4 9
160. R. Neugebauer An extended Procedure for Convective Boundary Conditions on Transient Thermal Simulations of Machine Tools Production Engineering. Research and Development 6 2010 641 646
161. M.A. Oliver, and R. Webster Kriging: A Method of Interpolation for Geographical Information Systems International Journal of Geographical Information Science 4 3 1990 313 332
162. M. Pierse A Simple Method for Thermal Error Correction of a Grinding Machine Proceedings Lamdamap, vol. 8 2007 1861941188
163. G. Popov Einfluss der Konvektion auf das thermische Verhalten von Werkzeugmaschinen Industrie-Anzeiger 23 1988 38 39
164. S.R. Postlethwaite Machine Tool Thermal Error Reduction - An Appraisal Proceedings Institution of Mechanical Engineers 213 B 1999 1 9
165. R. Ramesh Error Compensation in Machine Tools - A Review Part II: Thermal Errors International Journal of Machine Tools and Manufacture 40 2000 1257 1284 (Pubitemid 30592197)
166. R. Ramesh Support Vector Machine Model for Classification of thermal Error in Machine Tools International Journal of Advanced Manufacturing Technology 20 2002 114 120 (Pubitemid 34962371)
167. R. Ramesh Thermal Error Measurement and Modelling in Machine Tools Part I: Influence of Varying Operating Condition International Journal of Machine Tools and Manufacture 43 2003 405 419
168. R. Ramesh Thermal Error Measurement and Modelling in Machine Tools Part II: Hybrid Bayesian Network-support Vector Machine Model International Journal of Machine Tools and Manufacture 43 2003 405 419
169. E. Saljè Comparison of Machine Tool Elements Made of Polymer Concrete and Cast Iron Annals of the CIRP 37 1 1988 381 384
170. H. Schwenke Error Mapping of CMMs and Machine Tools by a Single Tracking Interferometer CIRP Annals 54 1 2005 475 478 (Pubitemid 40948500)
171. H. Schwenke Geometric Error Measurement and Compensation of machines - An Update Annals of the CIRP 57 2 2008 660 675
172. H. Schwenke On-the-fly Calibration of Linear and Rotary Axes of Machine Tools and CMMs Using a Tracking Interferometer Annals of the CIRP 58/1 2009 477 480
173. Shore, P., 1995, Ultra Precision Machining Facility, PhD Thesis, Cranfield.
174. D. Song Real-time Measurement of Spindle Thermal Deformatio Using Interferometers Optical Engineering 39 8 2000 2114 2118
175. H.B. Song Flow and Heat Transfer Characteristics of a Two-dimensional Oblique Wall Attaching Offset Jet International Journal of Heat and Mass Transfer 43 2000 2395 2404 (Pubitemid 30247667)
176. G. Spur Thermal Behaviour Optimization of Machine Tools Annals of the CIRP 37 1 1988 400 405
177. G. Spur Ausgleich von Axial- und Winkelverlagerungen an Drehmaschinen durch Beheizen Industrie-Anzeiger 89 2 1989 32 33
178. G. Spur Konstruktionskatalog zur Optimierung des thermischen Verhaltens von Werkzeugmaschinen, Teil1: Aufbau des Katalog, Spindelbaugruppe Zeitschrift für wirtschaftlichen Fabrikbetrieb 87 12 1992 690 693
179. N. Srinivasa Spindle Thermal Drift Measurement Using the Laser Ball Bar Precision Engineering 18 1996 118 128 (Pubitemid 126400065)
180. J.W.M.C. Teeuwsen A General Method for Error Description of CMMs Using Polynomial Fitting Procedures Annals of the CIRP 38 1 1989 505 510
181. P. Turek Methods of Machine Tool Error Compensation Journal of Machine Engineering 10 4 2010 5 26
182. E. Uhlmann Simulation of the Thermal Behavior of a Machine Tool Equipped with Linear Motors Deutsch-Polnisches Seminar 2010
183. E. Uhlmann Adaptronic Compensation of Thermal Strain at Machine Tool Spindles using CRP-Bandages Proceedings of 2nd Manufacturing Engineering Society International Conference 2007
184. E. Uhlmann Milling Machine Evolution in Area of Conflict between Efficiency Accuracy and Social Ecology, 12th International Seminar on High Techn. UNIMEP 2007
185. E. Uhlmann Compensation of Thermal Deformations at Machine Tools using Adaptronic CRP-Structures Proceedings of 41st CIRP Conference on Manufacturing Systems: Manufacturing Systems and Techniques for the New Front 2008 183 186
186. E. Uhlmann Application of CFRP Structures for Compensation of Thermal Strains at Machine Tools CIRP Paris January Meet. STC M Pap. Sess 2010
187. Uhlmann, E., et al., 2010, Kompensation thermischer Verlagerungen an Werkzeugmaschinen durch Einsatz von CFK-Strukturen, Fortschr.-Ber. VDI, Reihe 2 - Fertigungstechnik, Nr. 675: Hybride Techn. in der Prod., VDI-Verlag, 65-77.
188. Van den Bergh, C., 2001, Reducing Thermal Errors of CMM Located on the Shop-Floor, Diss. K.U. Leuven.
189. S.C. Veldhuis, and M.A. Elbestawi A Strategy of Compensation of Errors in Five-Axis Machining Annals of the CIRP 44 1 1995 373 377
190. R. Walter Mit direkter Kühlung zu mehr Genauigkeit Werkstatt und Betrieb 6 2006 129 130 (Pubitemid 44096837)
191. M. Weck, and C. Brecher Werkzeugmaschinen Automatisierung von Maschinen und Anlagen 2006 978-3540225072
192. M. Weck, and C. Brecher Werkzeugmaschinen Messtechnische Untersuchung und Beurteilung 2006 978-3540225058
193. M. Weck Compensation of Thermal Errors in Machine Tools with a Minimum Number of Temperature Probes Based on Neural Networks Proceedings of the ASME DSC 64 1998 423 430
194. M. Weck Kompensation thermoelastischer Strukturverformungen Werkstatttechnik Online 92 2002 327 332
195. M. Weck Reduction and Compensation of Thermal Errors in Machine Tools Annals of the CIRP 44 2 1995 589 598
196. D. Weidlich, and S. Nestmann Kompaktführungen an Mineralgussgestellen Werkstatt und Betrieb 7-8 2001 120 123
197. S. Weikert, and W. Knapp R-Test, A New Device for Accuracy Measurements on Five Axis Machine Tools Annals of the CIRP 53 1 2004 429 432
198. K. Wendt Inspection of Large CMMs by Sequential Multilateration Using a Single Laser Tracker, Laser Metrology and Machine Performance VI 6th International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance 2003 121 130
199. K. Wendt Mobile Multi-lateration Measuring System for High Accurate and Traceable 3D Measurements of Large Objects Proceedings of the 10th ISMQC, Paper No. 25 2010 1 4
200. Z. Winiarski Decreasing of Thermal Errors in a Lathe by Forced Cooling of Ball Screws and Headstock Journal of Machine Engineering 8 4 2008 122 130
201. C.H. Wu Thermal Analysis for the Feed Drive System of a CNC Machine Centre International Journal of Machine Tools and Manufacture 43 2003 1521 1528
202. www.precitech.com, 10.03.2011, http://www.makino.com, 10.03.2011.
203. H. Yang Dynamic Neural Network Modelling for Nonlinear, Nonstationary Machine Tool Thermally Induced Error International Journal of Machine Tools and Manufacture 45 2005 455 465 (Pubitemid 40142538)
204. H. Yang Adaptive Model Estimation of Machine-tool Thermal Errors Based on Recursive Dynamic Modelling Strategy International Journal of Machine Tools and Manufacture 45 2005 1 11
205. H. Yang, and J. Ni Adaptive Model Estimation of Machine-tool Thermal Errors Based on Recursive Dynamic Modelling Strategy Machine Tools & Manufacture 45 2005 1 11
206. S.H. Yang Measurement of Spindle Thermal Errors in Machine Tool Using Hemispherical Ball Bar Test International Journal of Machine Tools and Manufacture 44 2004 333 340
207. W.S. Yun Thermal Error Analysis for a CNC Lathe Feed Drive System International Journal of Machine Tools and Manufacture 39 1999 1088 1101
208. Y. Zhao Optimization and Temperature Mapping of An Ultra-High Thermal Stability Environmental Enclosure Precision Engineering 34 2010 164 170