How and when does fabrication damage adversely affect the clinical performance of ceramic restorations?

Dental Materials

Volumn 29, Issue 1, 2013, Pages 85-96

  Denry, Isabelle ^a  

^a UNIVERSITY OF IOWA   (United States)

Author keywords

Ceramics; Clinical studies; Defects; Failure; Porosity; Survival; Zirconia

Indexed keywords

ALL-CERAMIC; CERAMIC RESTORATIONS; CERAMICS; CLINICAL CONDITIONS; CLINICAL PERFORMANCE; CLINICAL STUDY; DENTAL CERAMIC; DENTAL RESTORATIONS; FABRICATION DEFECTS; FABRICATION TECHNIQUE; FAILURE MECHANISM; HARD MACHINING; IN-VIVO; LABORATORY TEST; MULTI-UNIT; PHYSICAL FACTORS; PROCESSING TECHNIQUE; RESTORATION DESIGN; SLIP-CASTING; SURVIVAL; THERMAL RESIDUAL STRESS;

CERAMIC MATERIALS; COMPUTER SYSTEM RECOVERY; DEFECTS; DENTAL MATERIALS; FAILURE (MECHANICAL); FILLING; POROSITY; RESTORATION; SINTERING; ZIRCONIA;

FABRICATION;

CERAMICS; CHEMISTRY; CLASSIFICATION; DENTAL SURGERY; EQUIPMENT FAILURE; HUMAN; REVIEW;

CERAMICS; DENTAL RESTORATION FAILURE; DENTAL RESTORATION, PERMANENT; EQUIPMENT FAILURE ANALYSIS; HUMANS;

EID: 84870998962     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2012.07.001     Document Type: Review

References (108)

1. R. Rice Porosity of ceramics 1998 Marcel Dekker, Inc. New York p. 539
2. J.Y. Thompson, K.J. Anusavice, A. Naman, and H.F. Morris Fracture surface characterization of clinically failed all-ceramic crowns Journal of Dental Research 73 1994 1824 1832
3. U. Lohbauer, G. Amberger, G.D. Quinn, and S.S. Scherrer Fractographic analysis of a dental zirconia framework: a case study on design issues Journal of Mechanical Behavior of Biomedical Materials 3 2010 623 629
4. J.R. Mackert Jr., and A.L. Williams Microcracks in dental porcelains and their behavior during multiple firing Journal of Dental Research 75 1996 1484 1490
5. B. Taskonak, J.J. Mecholsky, and K.J. Anusavice Fracture surface analysis of clinically failed fixed partial dentures Journal of Dental Research 85 2006 277 281
6. G.D. Quinn, K. Hoffman, and J.B. Quinn Strength and fracture origins of a feldspathic porcelain Dental Materials 28 2012 502 511
7. I.C. Clarke, M. Manaka, D.D. Green, P. Williams, G. Pezzotti, and Y.H. Kim Current status of zirconia used in total hip implants Journal of Bone and Joint Surgery 85A 2003 73 84
8. M. Allahkarami, and J.C. Hanan Mapping the tetragonal to monoclinic phase transformation in zirconia core dental crowns Dental Materials 27 2011 1279 1284
9. J. Chevalier, L. Grémillard, A.V. Virkar, and D.R. Clarke The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends Journal of the American Ceramic Society 92 2009 1901 1920
10. J.R. Kelly, S.D. Campbell, and H.K. Bowen Fracture surface analysis of dental ceramics Journal of Prosthetic Dentistry 62 1989 536 541
11. J.R. Kelly, R. Giordano, R. Pober, and M.J. Cima Fracture surface analysis of dental ceramics: clinically failed restorations International Journal of Prosthodontics 3 1990 430 440
12. J.R. Kelly, J.A. Tesk, and J.A. Sorensen Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling Journal of Dental Research 74 1995 1253 1258
13. S.S. Scherrer, J.R. Kelly, G.D. Quinn, and K. Xu Fracture toughness (KIc) of a dental porcelain determined by fractographic analysis Dental Materials 15 1999 342 348
14. S.S. Scherrer, G.D. Quinn, and J.B. Quinn Fractographic failure analysis of a Procera (R) AllCeram crown using stereo and scanning electron microscopy Dental Materials 24 2008 1107 1113
15. S.S. Scherrer, J.B. Quinn, G.D. Quinn, and J.R. Kelly Failure analysis of ceramic clinical cases using qualitative fractography International Journal of Prosthodontics 19 2006 185 192
16. S.S. Scherrer, J.B. Quinn, G.D. Quinn, and H.A. Wiskott Fractographic ceramic failure analysis using the replica technique Dental Materials 23 2007 1397 1404
17. B. Taskonak, J. Yan, J.J. Mecholsky, A. Sertgoz, and A. Kocak Fractographic analyses of zirconia-based fixed partial dentures Dental Materials 24 2008 1077 1082
18. J.J. Mecholsky Fractography - determining the sites of fracture initiation Dental Materials 11 1995 113 116
19. J.B. Quinn, G.D. Quinn, J.R. Kelly, and S.S. Scherrer Fractographic analyses of three ceramic whole crown restoration failures Dental Materials 21 2005 920 929
20. R.W. Rice Ceramic fracture mode-Intergranular vs. transgranular fracture J. Varner, V. Fréchette, G. Quinn, Fractography of glass and ceramics III 1996 The American Ceramic Society Westerville, OH 1 53
21. M. Rosentritt, C. Kolbeck, G. Handel, S. Schneider-Feyrer, and M. Behr Influence of the fabrication process on the in vitro performance of fixed dental prostheses with zirconia substructures Clinical Oral Investigations 15 2011 1007 1012
22. M.J. Tholey, M.V. Swain, and N. Thiel Thermal gradients and residual stresses in veneered Y-TZP frameworks Dental Materials 27 2011 1102 1110
23. M.P. Borom, A.M. Turkalo, and R.H. Doremus Strength and microstructure in lithium disilicate glass-ceramics Journal of the American Ceramic Society 58 1975 385 391
24. P.J. Withers Residual stress and its role in failure Reports on Progress in Physics 70 2007 2211 2264
25. M.V. Swain Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures Acta Biomaterialia 5 2009 1668 1677
26. F. Beuer, D. Edelhoff, W. Gernet, and J.A. Sorensen Three-year clinical prospective evaluation of zirconia-based posterior fixed dental prostheses (FDPs) Clinical Oral Investigations 13 2009 445 451
27. I. Sailer, A. Feher, F. Filser, L.J. Gauckler, H. Luthy, and C.H.F. Hammerle Five-year clinical results of zirconia frameworks for posterior fixed partial dentures International Journal of Prosthodontics 20 2007 383 388
28. A. Evans Slow crack growth in brittle materials under dynamic loading conditions International Journal of Fatigue 10 1974 251 259
29. T.A. Michalske, and S.W. Freiman A molecular mechanism for stress-corrosion in vitreous silica Journal of the American Ceramic Society 66 1983 284 288
30. Y. Zhang, and B. Lawn Long-term strength of ceramics for biomedical applications Journal of Biomedical Materials Research B-Applied Biomaterials 69B 2004 166 172
31. C.C. Gonzaga, P.F. Cesar, W.G. Miranda, and H.N. Yoshimura Slow crack growth and reliability of dental ceramics Dental Materials 27 2011 394 406
32. U. Lohbauer, N. Kramer, A. Petschelt, and R. Frankenberger Correlation of in vitro fatigue data and in vivo clinical performance of a glassceramic material Dental Materials 24 2008 39 44
33. M. Guazzato, M. Albakry, S.P. Ringer, and M.V. Swain Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics Dental Materials 20 2004 441 448
34. M. Albakry, M. Guazzato, and M.V. Swain Influence of hot pressing on the microstructure and fracture toughness of two pressable dental glass-ceramics Journal of Biomedical Materials Research 71B 2004 99 107
35. M. Guazzato, M. Albakry, S.P. Ringer, and M.V. Swain Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics Dental Materials 20 2004 449 456
36. I. Denry, and J. Holloway Ceramics for dental applications: a review Materials 3 2010 351 368
37. I. Denry, and J.R. Kelly State of the art of zirconia for dental applications Dental Materials 24 2008 299 307
38. J.R. Kelly, and I. Denry Stabilized zirconia as a structural material Dental Materials 24 2008 289 298
39. R.C. Garvie, R.H. Hannink, and R.T. Pascoe Ceramic steel? Nature 258 1975 703 704
40. Y. Zhang, and B. Lawn Fatigue sensitivity of Y-TZP to microscale sharp-contact flaws Journal of Biomedical Materials Research-Applied Biomaterials 72B 2005 388 392
41. S.S. Brown, D.D. Green, G. Pezzotti, T.K. Donaldson, and I.C. Clarke Possible triggers for phase transformation in zirconia hip balls Journal of Biomedical Materials Research B-Applied Biomaterials 85B 2008 444 452
42. J. Luo, S. Adak, and R. Stevens Microstructure evolution and grain growth in the sintering of 3Y-TZP ceramics Journal of Materials Science 33 1998 5301 5309
43. I.L. Denry, J.J. Peacock, and J.A. Holloway Effect of heat treatment after accelerated aging on phase transformation in 3Y-TZP Journal of Biomedical Materials Research B-Applied Biomaterials 93B 2010 236 243
44. H.G. Scott Phase relationships in the zirconia-yttria system Journal of Materials Science 10 1975 1527 1535
45. J. Chevalier, S. Deville, E. Münch, R. Jullian, and F. Lair Critical effect of cubic phase on aging in 3 mol.% yttria-stabilized zirconia ceramics for hip replacement prosthesis Biomaterials 25 2004 5539 5545
46. K. Matsui, H. Horikoshi, N. Ohmichi, M. Ohgai, H. Yoshida, and Y. Ikuhara Cubic-formation and grain-growth mechanisms in tetragonal zirconia polycrystal Journal of the American Ceramic Society 86 2003 1401 1408
47. R.W. Rice Pores as fracture origins in ceramics Journal of Materials Science 19 1984 895 914
48. C.S. Lu, R. Danzer, and F.D. Fischer Scaling of fracture strength in ZnO: effects of pore/grain-size interaction and porosity Journal of the European Ceramic Society 24 2004 3643 3651
49. J.B. Wachtman, and J. Dundurs Large localized surface stresses caused by thermal expansion anisotropy Journal of the American Ceramic Society 54 1971 525-526
50. R. Danzer, T. Lube, P. Supancic, and R. Damani Fracture of ceramics Advanced Engineering Materials 10 2008 275 298
51. E.D. Rekow, N. Silva, P.G. Coelho, Y. Zhang, P. Guess, and V.P. Thompson Performance of dental ceramics: challenges for improvements Journal of Dental Research 90 2011 937 952
52. J.R. Strub, E.D. Rekow, and S. Witkowski Computer-aided design and fabrication of dental restorations - current systems and future possibilities Journal of the American Dental Association 137 2006 1289 1296
53. R.W. Rice Monolithic and composite ceramic machining flaw-micro structure-strength effects: model evaluation Journal of the European Ceramic Society 22 2002 1411 1424
54. W.D. Kingery, H.K. Bowen, and D.R. Uhlmann Introduction to ceramics Second ed. 1976 John Wiley & Sons New York
55. I.L. Denry, and J.A. Holloway Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics Journal of Biomedical Materials Research B-Applied Biomaterials 76B 2006 440 448
56. T. Kosmac, C. Oblak, P. Jevnikar, N. Funduk, and L. Marion The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic Dental Materials 15 1999 426 433
57. T. Kosmac, C. Oblak, P. Jevnikar, N. Funduk, and L. Marion Strength and reliability of surface treated Y-TZP dental ceramics Journal of Biomedical Materials Research 53 2000 304 313
58. T. Kosmac, C. Oblak, and L. Marion The effects of dental grinding and sandblasting on ageing and fatigue behavior of dental zirconia (Y-TZP) ceramics Journal of the European Ceramic Society 28 2008 1085 1090
59. M. Guazzato, L. Quach, M. Albakry, and M.V. Swain Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic Journal of Dentistry 33 2005 9 18
60. J. Chevalier What future for zirconia as a biomaterial? Biomaterials 27 2006 535 543
61. J. Chevalier, C. Olagnon, and G. Fantozzi Subcritical crack propagation in 3Y-TZP ceramics: static and cyclic fatigue Journal of the American Ceramic Society 82 1999 3129 3138
62. A.J. Raigrodski, G.J. Chiche, N. Potiket, J.L. Hochstedler, S.E. Mohamed, and S. Billiot The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study Journal of Prosthetic Dentistry 96 2006 237 244
63. S. Eschbach, S. Wolfart, F. Bohlsen, and M. Kern Clinical evaluation of all-ceramic posterior three-unit FDPs made of in-ceram zirconia International Journal of Prosthodontics 22 2009 490 492
64. C. Larsson, and P.V. von Steyern Five-year follow-up of implant-supported Y-TZP and ZTA fixed dental prostheses. A randomized, prospective clinical trial comparing two different material systems International Journal of Prosthodontics 23 2010 555 561
65. C. Larsson, P.V. von Steyern, and K. Nilner A prospective study of implant-supported full-arch yttria-stabilized tetragonal zirconia polycrystal mandibular fixed dental prostheses: three-year results International Journal of Prosthodontics 23 2010 364 369
66. M. Roediger, N. Gersdorff, A. Huels, and S. Rinke Prospective evaluation of zirconia posterior fixed partial dentures: four-year clinical results International Journal of Prosthodontics 23 2010 141 148
67. I. Sailer, J. Gottner, S. Kanel, and C.H.F. Hammerle Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses: a 3-year follow-up International Journal of Prosthodontics 22 2009 553 560
68. ® technique. A 2-year clinical study Journal of Oral Rehabilitation 32 2005 180 187
69. S. Wolfart, S. Harder, S. Eschbach, F. Lehmann, and M. Kern Four-year clinical results of fixed dental prostheses with zirconia substructures (Cercon): end abutments vs. cantilever design European Journal of Oral Sciences 117 2009 741 749
70. C. Larsson, P.V. von Steyern, B. Sunzel, and K. Nilner All-ceramic two- and five-unit implant-supported reconstructions. A randomized, prospective clinical trial Swedish Dental Journal 30 2006 45 53
71. B. Al-Amleh, K. Lyons, and M. Swain Clinical trials in zirconia: a systematic review Journal of Oral Rehabilitation 37 2010 641 652
72. S.D. Heintze, and V. Rousson Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review International Journal of Prosthodontics 23 2010 493 502
73. J.S. Schley, N. Heussen, S. Reich, J. Fischer, K. Haselhuhn, and S. Wolfart Survival probability of zirconia-based fixed dental prostheses up to 5 years: a systematic review of the literature European Journal of Oral Sciences 118 2010 443 450
74. A.J. Raigrodski, M.B. Hillstead, G.K. Meng, and K.H. Chung Survival and complications of sirconia-based fixed dental prostheses: a systematic review Journal of Prosthetic Dentistry 107 2012 170 177
75. M.V. Swain Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures Acta Biomaterials 2009
76. J.E. Choi, J.N. Waddell, and M.V. Swain Pressed ceramics onto zirconia. Part 2: indentation fracture and influence of cooling rate on residual stresses Dental Materials 27 2011 1111 1118
77. A.K. Mainjot, G.S. Schajer, A.J. Vanheusden, and M.J. Sadoun Influence of zirconia framework thickness on residual stress profile in veneering ceramic: measurement by hole-drilling Dental Materials 28 2012 378 384
78. A.K. Mainjot, G.S. Schajer, A.J. Vanheusden, and M.J. Sadoun Influence of veneer thickness on residual stress profile in veneering ceramic: measurement by hole-drilling Dental Materials 28 2012 160 167
79. 3-stabilized tetragonal zirconia Journal of the American Ceramic Society 69 1986 270 271
80. M. Schmitter, K. Mussotter, P. Rammelsberg, T. Stober, B. Ohlmann, and O. Gabbert Clinical performance of extended zirconia frameworks for fixed dental prostheses: two-year results Journal of Oral Rehabilitation 36 2009 610 615
81. M.C. Cehreli, A.M. Kokat, and K. Akca CAD/CAM zirconia vs. slip-cast glass-infiltrated alumina/zirconia all-ceramic crowns: 2-year results of a randomized controlled clinical trial Journal of Applied Oral Science 17 2009 49 55
82. S. Wiederhorn Influence of water vapor on crack propagation in glass Journal of the American Ceramic Society 50 1967 407 414
83. T. Michalske, and S. Freiman A molecular interpretation of stress corrosion in silica Nature 295 1982 511 512
84. K.J. Anusavice Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal-ceramic fixed dental prostheses Dental Materials 28 2012 102 111
85. S.D. Heintze, and V. Rousson Fracture rates of IPS empress all-ceramic crowns-a systematic review International Journal of Prosthodontics 23 2010 129 133
86. K.F. Anusavice, K. Kakar, and N. Ferree Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramic-based dental prostheses? Clinical Oral Implants Research 18 2007 218 231
87. J.R. Kelly, P. Benetti, P. Rungruanganunt, and A. Della Bona The slippery slope - critical perspectives on in vitro research methodologies Dental Materials 28 2012 41 51
88. M.J. Suarez, J.F.L. Lozano, M.P. Salido, and F. Martinez Three-year clinical evaluation of In-Ceram Zirconia posterior FPDs International Journal of Prosthodontics 17 2004 35 38
89. D. Edelhoff, F. Beuer, V. Weber, and C. Johnen HIP zirconia fixed partial dentures - clinical results after 3 years of clinical service Quintessence International 39 2008 459 471
90. B. Ohlmann, P. Rammelsberg, M. Schmitter, S. Schwarz, and O. Gabbert All-ceramic inlay-retained fixed partial dentures: preliminary results from a clinical study Journal of Dentistry 36 2008 692 696
91. M.K. Molin, and S.L. Karlsson Five-year clinical prospective evaluation of zirconia-based Denzir 3-unit FPDs International Journal of Prosthodontics 21 2008 223 227
92. J. Tinschert, K.A. Schulze, G. Natt, P. Latzke, N. Heussen, and H. Spiekermann Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results International Journal of Prosthodontics 21 2008 217 222
93. A. Ortorp, M.L. Kihl, and G.E. Carlsson A 3-year retrospective and clinical follow-up study of zirconia single crowns performed in a private practice Journal of Dentistry 37 2009 731 736
94. J. Schmitt, S. Holst, M. Wichmann, S. Reich, M. Gollner, and J. Hamel Zirconia posterior fixed partial dentures: a prospective clinical 3-year follow-up International Journal of Prosthodontics 22 2009 597 603
95. D. Lops, D. Mosca, P. Casentini, M. Ghisolfi, and E. Romeo Prognosis of zirconia ceramic fixed partial dentures: a 7-year prospective study International Journal of Prosthodontics 25 2012 21 23
96. A. Ortorp, M.L. Kihl, and G.E. Carlsson A 5-year retrospective study of survival of zirconia single crowns fitted in a private clinical setting Journal of Dentistry 40 2012 527 530
97. J. Sorensen, C. Choi, M. Fabnuscu, and W.T. Mito IPS Empress crown system: three-year clinical results Journal - California Dental Association 26 1998 130 136
98. S. Studer, C. Lehne, U. Brodbeck, and P. Scharer Six-year results of leucite-reinforced glass ceramic crowns Acta Medica Dental Helvetica 3 1998 218 225
99. G. Sjogren, R. Lantto, A. Granberg, B.O. Sundstrom, and A. Tillberg Clinical examination of leucite-reinforced glass-ceramic crowns (Empress) in general practice: a retrospective study International Journal of Prosthodontics 12 1999 122 128
100. M. Fradeani, and M. Redemagni An 11-year clinical evaluation of leucite-reinforced glass-ceramic crowns: a retrospective study Quintessence International 33 2002 503 510
101. D. Gemalmaz, and S. Ergin Clinical evaluation of all-ceramic crowns Journal of Prosthetic Dentistry 87 2002 189 196
102. P. Marquardt, and J.R. Strub Survival rates of IPS Empress 2 all-ceramic crowns and fixed partial dentures: results of a 5-year prospective clinical study Quintessence International 37 2006 253 259
103. B. Taskonak, and A. Sertgoz Two-year clinical evaluation of lithia-disilicate-based all-ceramic crowns and fixed partial dentures Dental Materials 22 2006 1008 1013
104. J.F. Esquivel-Upshaw, H. Young, J. Jones, M. Yang, and K.J. Anusavice Four-year clinical performance of a lithia disilicate-based core ceramic for posterior fixed partial dentures International Journal of Prosthodontics 21 2008 155 160
105. M. Valenti, and A. Valenti Retrospective survival analysis of 261 lithium disilicate crowns in a private general practice Quintessence International 40 2009 573 579
106. M.K. Etman, and M.J. Woolford Three-year clinical evaluation of two ceramic crown systems: a preliminary study Journal of Prosthetic Dentistry 103 2010 80 90
107. M. Kern, and M. Sasse Ten-year survival of anterior all-ceramic resin-bonded fixed dental prostheses Journal of Adhesive Dentistry 13 2011 407 410
108. M. Gehrt, S. Wolfart, N. Rafai, S. Reich, and D. Edelhoff Clinical results of lithium disilicate crowns after up to 9 years of service Clinical Oral Investigations 2012 Published online, Accessed June 8, 2012 http://www.springerlink.com/content/nx2n675355k2p63j/