Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramic-based dental prostheses?

Clinical Oral Implants Research

Volumn 18, Issue SUPPL. 3, 2007, Pages 218-231

  Anusavice, K J ^a   Kakar, Kunjan ^a   Ferree, N ^b  

^a UNIVERSITY OF FLORIDA COLLEGE OF DENTISTRY   (United States)

^b UNIVERSITY OF FLORIDA   (United States)

Author keywords

Dental ceramic; Fixed dental prosthesis; Metal ceramic; Prosthesis; Survival

Indexed keywords

ARTICLE; CERAMICS; DENTAL SURGERY; HUMAN; LONGITUDINAL STUDY; MATERIALS TESTING; PREDICTIVE VALUE; TOOTH PROSTHESIS;

CERAMICS; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION FAILURE; HUMANS; LONGITUDINAL STUDIES; MATERIALS TESTING; PREDICTIVE VALUE OF TESTS;

EID: 34250636079     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2007.01460.x     Document Type: Article

References (67)

1. Albakry, M., Guazzato, M. Swain, M.V. (2004) Effect of sandblasting, grinding, polishing and glazing on the flexural strength of two pressable all-ceramic dental materials. Journal of Dentistry 32 : 91 99.
2. Anusavice, K.J. Carroll, J.E. (1987) Effect of incompatibility stress on the fit of metal-ceramic crowns. Journal of Dental Research 66 : 1341 1345.
3. Anusavice, K.J., Dehoff, P.H. Fairhurst, C.W. (1980) Comparative evaluation of ceramic-metal bond tests using finite element stress analysis. Journal of Dental Research 59 : 608 613.
4. Anusavice, K.J., Dehoff, P.H., Gray, A. Lee, R.B. (1988) Delayed crack development in porcelain due to incompatibility stress. Journal of Dental Research 67 : 1086 1091.
5. Anusavice, K.J., DeHoff, P.H., Hojjatie, B. Gray, A. (1989) Influence of tempering and contraction mismatch on crack development in ceramic surfaces. Journal of Dental Research 68 : 1182 1187.
6. Anusavice, K.J., Dehoff, P.H., Twiggs, S.W. Lockwood, P.C. (1983) Thermal shock resistance of porcelain discs. Journal of Dental Research 62 : 1082 1085.
7. Anusavice, K.J., Gray, A. Shen, C. (1991) Influence of initial flaw size on crack growth in air-tempered porcelain. Journal of Dental Research 70 : 131 136.
8. Anusavice, K.J. Gray, A.E. (1989) Influence of framework design, contraction mismatch, and thermal history on porcelain checking in fixed partial dentures. Dental Materials 5 : 58 63.
9. Anusavice, K.J., Hojjatie, B. Dehoff, P.H. (1986) Influence of metal thickness on stress distribution in metal-ceramic crowns. Journal of Dental Research 65 : 1173 1178.
10. Anusavice, K.J. Zhang, N.Z. (1997) Chemical durability of Dicor and lithia-based glass-ceramics. Dental Materials 13 : 13 19.
11. Anusavice, K.J. Zhang, N.Z. (1998) Chemical durability of Dicor and fluorocanasite-based glass-ceramics. Journal of Dental Research 77 : 1553 1559.
12. Attia, A. Kern, M. (2004) Fracture strength of all-ceramic crowns luted using two bonding methods. Journal of Prosthetic Dentistry 91 : 247 252.
13. Ban, S. Anusavice, K.J. (1990) Influence of test method on failure stress of brittle dental materials. Journal of Dental Research 69 : 1791 1799.
14. Ban, S., Hasegawa, J. Anusavice, K.J. (1992) Effect of loading conditions on bi-axial flexure strength of dental cements. Dental Materials 8 : 100 104.
15. Chen, H.Y., Hickel, R., Setcos, J.C. Kunzelmann, K.H. (1999) Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed-ceramic crowns. Journal of Prosthetic Dentistry 82 : 468 475.
16. Cheung, G.S., Lai, S.C. Ng, R.P. (2005) Fate of vital pulps beneath a metal-ceramic crown or a bridge retainer. International Endodontics Journal 38 : 521 530.
17. Cook, R.F., Lawn, B.R. Fairbanks, C.J. (1985) Microstructure-strength properties in ceramics: II. Fatigue relations. Journal of the American Ceramic Society 68 : 616 623.
18. Creugers, N.H., Kayser, A.F. van't Hof, M.A. (1994) A meta-analysis of durability data on conventional fixed bridges. Community Dentistry and Oral Epidemiology 22 : 448 452.
19. Dauskardt, R.H., Yu, W. Ritchie, R.O. (1987) Fatigue crack propagation in transformation-toughened zirconia ceramic. Communications of the American Ceramic Society 70 : C248 C252.
20. De Backer, H., Van Maele, G., De Moor, N., Van den Berghe, L. De Boever, J. (2006) A 20-year retrospective survival study of fixed partial dentures. International Journal of Prosthodontics 19 : 143 153.
21. Esquivel-Upshaw, J.F., Anusavice, K.J., Young, H., Jones, J. Gibbs, C. (2004) Clinical performance of a lithia disilicate-based core ceramic for three-unit posterior FPDs. International Journal of Prosthodontics 17 : 469 475.
22. Fairhurst, C.W., Anusavice, K.J., Hashinger, D.T., Ringle, R.D. Twiggs, S.W. (1980) Thermal expansion of dental alloys and porcelains. Journal of Biomedical Materials Research 14 : 435 446.
23. Fairhurst, C.W., Lockwood, P.E., Ringle, R.D. Twiggs, S.W. (1993) Dynamic fatigue of feldspathic porcelain. Dental Materials 9 : 269 273.
24. Fischer, H., Weber, M. Marx, R. (2003) Lifetime prediction of all-ceramic bridges by computational methods. Journal of Dental Research 82 : 238 242.
25. Gilde, H., Lenz, P. Fuchs, N. (1988) [Fatigue tests of ceramic veneer taper crowns]. Deutsche zahnärztliche Zeitschrift Z 43 : 504 506.
26. Kelly, J.R. (1995) Perspectives on strength. Dental Materials 11 : 103 110.
27. Kelly, J.R. (1999) Clinically relevant approach to failure testing of all-ceramic restorations. Journal of Prosthetic Dentistry 81 : 652 661.
28. Kelly, J.R., Campbell, S.D. Bowen, H.K. (1989) Fracture-surface analysis of dental ceramics. Journal of Prosthetic Dentistry 62 : 536 541.
29. Kelly, J.R., Giordano, R., Pober, R. Cima, M.J. (1990) Fracture surface analysis of dental ceramics: clinically failed restorations. International Journal of Prosthodontics 3 : 430 440.
30. Kelly, J.R., Tesk, J.A. Sorensen, J.A. (1995) Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. Journal of Dental Research 74 : 1253 1258.
31. Kidd, E.A., Joyston-Bechal, S. Beighton, D. (1995) Marginal ditching and staining as a predictor of secondary caries around amalgam restorations: a clinical and microbiological study. Journal of Dental Research 74 : 1206 1211.
32. Kovarik, R.E., Breeding, L.C. Caughman, W.F. (1992) Fatigue life of three core materials under simulated chewing conditions. Journal of Prosthetic Dentistry 68 : 584 590.
33. Libby, G., Arcuri, M.R., LaVelle, W.E. Hebl, L. (1997) Longevity of fixed partial dentures. Journal of Prosthetic Dentistry 78 : 127 131.
34. Llobell, A., Nicholls, J.I., Kois, J.C. Daly, C.H. (1992) Fatigue life of porcelain repair systems. International Journal of Prosthodontics 5 : 205 213.
35. Lövgren, R., Andersson, B., Carlsson, G.E. Odman, P. (2000) Prospective clinical 5-year study of ceramic-veneered titanium restorations with the Procera system. Journal of Prosthetic Dentistry 84 : 514 521.
36. Mackert, J.R. Evans, A.L. (1991a) Quantitative X-ray diffraction determination of leucite thermal instability in dental porcelain. Journal of the American Ceramic Society 74 : 450 453.
37. Mackert, J.R. Jr. Evans, A.L. (1991b) Effect of cooling rate on leucite volume fraction in dental porcelains. Journal of Dental Research 70 : 137 139.
38. Mackert, J.R. Jr. Williams, A.L. (1996) Microcracks in dental porcelain and their behavior during multiple firing. Journal of Dental Research 75 : 1484 1490.
39. Marquardt, P. Strub, J.R. (2006) Survival rates of IPS empress 2 all-ceramic crowns and fixed partial dentures: results of a 5-year prospective clinical study. Quintessence International 37 : 253 259.
40. Mjör, I.A. Toffenetti, F. (2000) Secondary caries: a literature review with case reports. Quintessence International 31 : 165 179.
41. Morena, R., Beaudreau, G.M., Lockwood, P.E., Evans, A.L. Fairhurst, C.W. (1986) Fatigue of dental ceramics in a simulated oral environment. Journal of Dental Research 65 : 993 997.
42. Myers, M.L., Ergle, J.W., Fairhurst, C.W. Ringle, R.D. (1994a) Fatigue characteristics of a high-strength porcelain. International Journal of Prosthodontics 7 : 253 257.
43. Myers, M.L., Ergle, J.W., Fairhurst, C.W. Ringle, R.D. (1994b) Fatigue failure parameters of IPS-Empress porcelain. International Journal of Prosthodontics 7 : 549 553.
44. Napankangas, R., Salonen-Kemppi, M.A. Raustia, A.M. (2002) Longevity of fixed metal ceramic bridge prostheses: a clinical follow-up study. Journal of Oral Rehabilitation 29 : 140 145.
45. Oh, W., Götzen, N. Anusavice, K.J. (2002) Influence of connector design on fracture probability of ceramic fixed-partial dentures. Journal of Dental Research 81 : 623 627.
46. Oh, W.S. Anusavice, K.J. (2002) Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures. Journal of Prosthetic Dentistry 87 : 536 542.
47. Ohyama, T., Yoshinari, M. Oda, Y. (1999) Effects of cyclic loading on the strength of all-ceramic materials. International Journal of Prosthodontics 12 : 28 37.
48. Olsson, K.G., Furst, B., Andersson, B. Carlsson, G.E. (2003) A long-term retrospective and clinical follow-up study of In-Ceram alumina FPDs. International Journal of Prosthodontics 16 : 150 156.
49. Özer, L. (1997) The relation between gap size, microbial accumulation and the structural features of natural caries in extracted teeth with class I amalgam restorations. A stereo- and polarized light microscopic study. Thesis, University of Copenhagen.
50. Özer, L. (1998) The relation between gap size, microbial accumulation and the structural features of natural caries in extracted teeth with class I amalgam restorations: a stereo- and polarized microscopic study. Tandlægebladet 102 (NR6) : 318 319.
51. Özer, L. Thylstrup, A. (1995) What is known about caries in relation to restorations as a reason for replacement? A review. Advances in Dental Research 9 : 394 402.
52. Poljak-Guberina, R., Catovic, A., Jerolimov, V., Franz, M. Bergman, V. (1999) The fatigue strength of the interface between Ag-Pd alloy and hydrothermal ceramic. Dental Materials 15 : 417 420.
53. Raynaud, S., Champion, E., Bernache-Assolant, D. Tetard, D. (1998) Dynamic fatigue and degradation in solution of hydroxyapatite ceramics. Journal of Materials Science: Materials in Medicine 9 : 221 227.
54. Reitemeier, B., Hansel, K., Kastner, C. Walter, M.H. (2006) Metal-ceramic failure in noble metal crowns: 7-year results of a prospective clinical trial in private practices. International Journal of Prosthodontics 19 : 397 399.
55. Scurria, M.S., Bader, J.D. Shugars, D.A. (1998) Meta-analysis of fixed partial denture survival: prostheses and abutments. Journal of Prosthetic Dentistry 79 : 459 464.
56. Sokolowski, T.M., Hojjatie, B., Nemeth, N.N. Anusavice, K.J. (1996a) Stress and reliability analysis of a metal-ceramic dental crown. In Proceedings of ANSYS Conference and Exposition, 1 18. Pittsburgh, PA : NASA Lewis Research Center.
57. Sokolowski, T.M., Hojjatie, B., Nemeth, N.N. Anusavice, K.J. (1996b) Stress and reliability analysis of a metal-ceramic dental crown. NASA Technical Memorandum 107178 : 1 18.
58. Steiner, P.J., Kelly, J.R. Giuseppetti, A.A. (1997) Compatibility of ceramic-ceramic systems for fixed prosthodontics. International Journal of Prosthodontics 10 : 375 380.
59. Tan, K., Pjetursson, B.E., Lang, N.P. Chan, E.S. (2004) A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. Clinical Oral Implants Research 15 : 654 666.
60. Thompson, J.Y., Anusavice, K.J., Naman, A. Morris, H.F. (1994) Fracture surface characterization of clinically failed all-ceramic crowns. Journal of Dental Research 73 : 1824 1832.
61. Tsai, Y.L., Petsche, P.E., Anusavice, K.J. Yang, M.C. (1998) Influence of glass-ceramic thickness on Hertzian and bulk fracture mechanisms. International Journal of Prosthodontics 11 : 27 32.
62. Twiggs, S.W., Fairhurst, C.W., Lockwood, P.E. Ringle, R.D. (1995) Cyclic fatigue of a model feldspathic porcelain. Dental Materials 11 : 273 276.
63. Vult von Steyern, P., Jonsson, O. Nilner, K. (2001) Five-year evaluation of posterior all-ceramic three-unit (In-Ceram) FPDs. International Journal of Prosthodontics 14 : 379 384.
64. Walter, M., Reppel, P.D., Böning, K. Freesmeyer, W.B. (1999) Six-year follow-up of titanium and high-gold porcelain-fused-to-metal fixed partial dentures. Journal of Oral Rehabilitation 26 : 91 96.
65. White, S.N. (1993) Mechanical fatigue of a feldspathic dental porcelain. Dental Materials 9 : 260 264.
66. Williamson, R.T., Kovarik, R.E. Mitchell, R.J. (1996) Effects of grinding, polishing, and overglazing on the flexure strength of a high-leucite feldspathic porcelain. International Journal of Prosthodontics 9 : 30 37.
67. Zhang, Y. Lawn, B.R. (2005) Fatigue sensitivity of Y-TZP to microscale sharp-contact flaws. Journal of Biomedical Materials Research B Applied Biomaterials 72 : 388 392.