Fracture of ceramics

Advanced Engineering Materials

Volumn 10, Issue 4, 2008, Pages 275-298

  Danzer, Robert ^a   Lube, Tanja ^a   Supancic, Peter ^a   Damani, Rajiv ^b  

^a INSTITUT FÜR STRUKTUR UND FUNKTIONSKERAMIK   (Austria)

^b Sulzer Innotec   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

BRITTLE FRACTURE; BRITTLENESS; CRACK PROPAGATION; THERMAL SHOCK;

CONTACT DAMAGE; FRACTURE OF CERAMICS; PROBABILISTIC ASPECTS; SUB CRITICAL CRACK GROWTH;

CERAMIC MATERIALS;

EID: 43149126292     PISSN: 14381656     EISSN: 15272648     Source Type: Journal    
DOI: 10.1002/adem.200700347     Document Type: Review

References (138)

1. D. W. Kingery, H. K. Bowen, D. R. Uhlmann, Int. to Ceram. John Wiley & Sons, New York, 1976.
2. R. W. Davidge, Mech. Behaviour of Ceram. Cambridge University Press, Cambridge, 1979.
3. J. B. Wachtman, Mech. Properties of Ceram. Wiley-Interscience, New York, Chichester, 1996.
4. D. Munz, T. Fett, Ceram. Springer, Berlin, Heidelberg, 1999.
5. H. Hertz, J. reine, angew. Math. 1882, 92, 156.
6. ISO 14704:2000, Fine Ceram. (Adv. Ceram. Adv. Tech. Ceram.) - Test Meth.for Flexural Strength of Monolithic Ceram. at Room Temp.
7. R. Danzer, T. Lube, in: Tagungsband Werkstoffprüfung, Werkstoff-Informationsgesellschaft mbH, Frankfurt 2004, 245.
8. EN ISO 18756:2003, Fine Ceram. (Adv. Ceram. Adv. Tech. Ceram) - Determination of Fract. Toughness of Monolithic Ceram, at Room Temp. by the Surf. Crack in Fexure (SCF) Meth.
9. ISO 24370:2005, Fine Ceram. (Adv. Ceram. Adv. Tech. Ceram) - Determination of Fract. Toughness of Monolithic Ceram. at Room Temp, by the Chevron-notched Beam (CNB) Meth.
10. ISO DIS 23146:2007, Fine Ceram. (Adv. Ceram. Adv. Tech. Ceram.) - Determination of Fract. Toughness of Monolithic Ceram, at Room Temp, by the Single-edge Vee-notched Beam (SEVNB) Meth.
11. R. J. Primas, R. Gstrein, Fat. Fract. Eng. Mater. Struct. 1997, 20, 513.
12. EN ISO 15732:2003, Fine Ceram. (Adv. Ceram. Adv. Tech. Ceram.) - Determination of Fract.Toughness of Monolithic Ceram, at Room Temp, by the Single-edge Pre-cracked Beam (SEPB) Meth.
13. T. Lube, R. Danzer, M. Steen, in: Improved Ceram. Through New Measurements, Process, and Standards, The American Ceramic Society, Westerville 2002, 259.
14. R. Danzer, in: The Encycl. of Adv. Mater. Pergamon 1994, 385.
15. T. Lube, Entwicklung eines Zugversuches zur Zuverlä ssigkeitsprüfung von keramischen Ventilen, Diplomarbeit am Institut für Metallkunde und Werkstoffprüfung, Montanuniversität, 1993, 89.
16. J. J. Mecholsky, Ceram. Trans. 1991, 17, 413.
17. R. Morrell, Fractogr. of Brittle Mater. National Physical Laboratory, Teddington, 1999.
18. CEN/TS 843-6:2004, Adv. Tech. Ceram. - Monolithic Ceram. Mech. Properties at Room Temp. - Part 6: Guidance for Fractogr. Investigation.
19. R. Danzer, Key Eng. Mat. 2002, 223, 1.
20. ASTM C 1322-05b:2005, Standard Practice for Fractogr. and Characterization of Fract. Origins in Adv. Ceram.
21. R. Morrell, L. Byrne, M. Murray, in: Fractogr. of Classes and Ceram. IV, The American Ceramic Society, Westerville 2001, 253.
22. K. D. Mörgenthaler, E. Tiefenbacher, Abschlußbericht des 3. Förderungszeitraumes (1.3.1980 bis 30.6.1983) zum Forschungsvorhaben "Bauteile aus Keramik für Gasturbinen" (ZK/NT/NTS1021), BMFT-FB-T 86 027, Fachinformationszentrum Karlsruhe, Karlsruhe, 1983.
23. K. D. Mörgenthaler, in: Techn. Keram. Jahrbuch, Vulkan-Verlag, Essen 1988, 285.
24. D. P. H. Hasselman, J. Am. Ceram. Soc. 1969, 52, 600.
25. G. A. Schneider, R. Danzer, G. Petzow, Fortschr.ber. DKG 1988, 3, 59.
26. P. Supancic, R. Danzer, Ceram. Eng. Sci. Proc. 2003, 24, 371.
27. M. Fellner, P. Supancic, Key Eng. Mat. 2002, 223, 97.
28. B. R. Lawn, J. Am. Ceram. Soc. 1998, 81, 1977.
29. M. Lengauer, R. Danzer, J. Eur. Ceram. Soc., submitted 2007.
30. M. Lengauer, R. Danzer, W. Harrer, in: Walzen mit Keramik, Fraunhofer IRB Verlag, Stuttgart 2004, 95.
31. T. Lube, J. Eur. Ceram. Soc. 2001, 27, 211.
32. S. Jahanmir, Friction and Wear of Ceram. Marcel Dekker, New York, 1994.
33. N.J. McCormick, E. A. Almond, J. Hard Mater. 1990, 1, 25.
34. R. Morrell, Key Eng. Mater. 2005, 290, 14.
35. R. Danzer, M. Hangl, R. Paar, in: Fractogr. of Glasses and Ceram. IV, The American Ceramic Society, Westerville 2001, 43.
36. H. Chai, B. R. Lawn, Int. J. Fract. 2007, 145, 159.
37. J. B. Quinn, in: Fractogr. of Glasses and Ceram. V, Wiley-Interscience, Hoboken 2007, 253.
38. G. Schoeck, Int. J. Fract. 1990, 44, 1.
39. S. M. Wiederhorn, J. Am. Ceram. Soc. 1967, 50, 407.
40. T. A. Michalske, S. M. Freiman, Nature 1982, 95, 511.
41. R. Danzer, in: The Encycl. of Adv. Mater. Pergamon 1994, 2693.
42. R. K. Dauskardt, W. Yu, R. O. Ritchie, Eng. Mater. Struct. 1997, 20, 1453.
43. C. J. Gilbert, R. O. Ritchie, J. Am. Ceram. Soc. 1987, 70, C248.
44. G. Grathwohl, T. Liu, J. Am. Ceram. Soc. 1991, 74, 318.
45. A. M. Brown, M. F. Ashby, Acta Met. 1980, 28, 1085.
46. H. J. Frost, M. F. Ashby, Deformation Mech. Maps, Pergamon Press, Oxford, 1982.
47. H. Riedel, Fract. at High Temperatures, Springer-Velag, Berlin, 1987.
48. K. G. Nickel, Y. G. Gogotsi, in: Handbook of Ceramic Hard Materials, VCH-Wiley, Weinheim 2000, 140.
49. B. Schneider, A. Guette, R. Naslain, M. Cataldi, A. Costecalde, J. Mater. Sci. 1998, 33, 535.
50. A. B. Alles, V. L. Burdick, J. Am. Ceram. Soc. 1993, 76, 401.
51. B. R. Lawn, Fract. of Brittle Solids - Sec. Ed. Cambridge University PRess, Cambridge, 1993.
52. S. P. Timoshenko, J. N. Goodier, Theory of Elast. McGraw-Hill, New York, 1970.
53. D. Gross, T. Seelig, Fract. Mech. Springer, Berlin, 2006.
54. Y. Murakami, The Stress Intensity Factor Handbook, Pergamon Press, New York, 1986.
55. H. Tada, P. Paris, G. R. Irwin, The Stress Anal. Handbook, Del Research Corporation, St. Louis, 1985.
56. J. C. Newman, I. S. Raju, Eng. Fract. Mech. 1981, 15, 185.
57. A. A. Griffith, Phil. Trans. Royal Soc. London 1920, A221, 163.
58. A. G. Evans, J. Am. Ceram. Soc. 1990, 73, 187.
59. Y.-M. Mai, B. R. Lawn, J. Am. Ceram. Soc. 1987, 70, 289.
60. P. L. Swanson, C. J. Fairbanks, B. R. Lawn, Y.-M. Mai, B. J. Hockey, J. Am. Ceram. Soc. 1987, 70, 279.
61. R. W. Steinbrech, O. Schenkel, J. Am. Ceram. Soc. 1988, 71, C271.
62. R. Danzer, J. Eur. Ceram. Soc. 2006, 26, 3043.
63. A. Zimmermann, M. Hoffmann, B. D. Flinn, R. K. Bordia, T.-J. Chuang, E. R. Fuller, J. Rodel, J. Am. Ceram. Soc. 1998, 81, 2449.
64. C. Lu, R. Danzer, F. D. Fischer, J. Eur. Ceram. Soc. 2004, 24, 3643.
65. R. Danzer, J. Eur. Ceram. Soc. 1992, 10, 461.
66. R. A. Hunt, L. N. McCartney, Int. J. Fract. 1979, 15.
67. A. d. S. Jayatilaka, K. Trustrum, J. Mater. Sci. 1977, 12, 1426.
68. L. N. McCartney, Int. J. Fract. 1979, 15, 477.
69. R. Danzer, G. Reisner, H. Schubert, Z. Metallkde. 1992, 83, 508.
70. R. Danzer, T. Lube, P. Supancic, Z. Metallkde. 2001, 92, 773.
71. R. Danzer, P. Supancic, J. Pascual Herrero, T. Lube, Eng. Fract. Mech. 2007, 74, 2919.
72. W. Weibull, A Statistical Theory of the Strength of Mater. Generalstabens Litografiska Anstalts Förlag, Stockholm, 1939.
73. W. Weibull, J. Appl. Mech. 1951, 18, 293.
74. A. Brückner-Foit, A. Heger, D. Munz, Ceram. Eng. Sci. Proc. 1993, 14, 331.
75. N. N. Nemeth, J. M. Manderscheid, J. P. Gyekenyesi, Am. Ceram. Soc. Bull. 1989, 68, 2064.
76. G. D. Quinn, J. Am. Ceram. Soc. 2003, 86, 508.
77. G. D. Quinn, J. Am. Ceram. Soc. 2003, 86, 475.
78. A. M. Freudenthal, in: Fract. Academic Press, New York, London 1968, 591.
79. J. Lamon, J. Am. Ceram. Soc. 1990, 73, 2204.
80. T. Thiemeier, A. Brückner-Foit, H. Kölker, J. Am. Ceram. Soc. 1991, 74, 48.
81. A. Brückner-Foit, T. Fett, D. Munz, K. Schirmer, J. Eur. Ceram. Soc. 1997, 17, 689.
82. EN 843-1:1995, Adv. Tech. Ceram. - Monolithic Ceram. -Mech. Properties at Room Temp: Part 1 - Determination of Flexural Strength.
83. ASTM C 1161-02c:2002, Standard Test Meth. for Flexural Strength of Adv. Ceram. at Ambient Temp.
84. JIS R 1601:1995, Testing Meth. for Flexural Strength (Modulus of Rupture) of Fine Ceram.
85. ENV 843-5:1997, Adv. Techn. Ceram. - Monolithic Ceram. - Mech. Properties at Room Temperature: Part 5 - Statistical Evaluation.
86. ASTM C 1239-95:1995, Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Paramters for Adv. Ceram.
87. JIS R 1625:1996, Weibull Statistics of Strength Data for Fine Ceram.
88. T. Lube, R. Danzer, J. Kubier, J. Dusza, J.-P. Erauw, H. Klemm, V. M. Sglavo, in: Fract. Beyond 2000, EMAS Publications, Sheffield 2002, 409.
89. T. Lube, J. Dusza, J. Eur. Ceram. Soc. 2007, 27, 1203.
90. A. Borger, P. Supancic, R. Danzer, J. Eur. Ceram. Soc. 2002, 22, 1425.
91. A. Borger, P. Supancic, R. Danzer, J. Eur. Ceram. Soc. 2004, 24, 2917.
92. R. Danzer, W. Harrer, P. Supancic, T. Lube, Z. Wang, A. Borger, J, Eur. Ceram. Soc. 2007, 27, 1481.
93. F. I. Baratta, M. W. T. G. D. Quinn, Errors Associated with Flexure Testing of Brittle Mater. U.S. Army Materials Technology Laboratory, Watertown, 1997.
94. T. Lube, M. Manner, R. Danzer, Fat. Fract. Eng. Mater. Struct. 1997, 20, 1605.
95. C. Lu, R. Danzer, F. D. Fischer, Phys. Rev. 2002, E65, Article Number 067102.
96. L. Sigl, Z. Metallkde. 1992, 83, 518.
97. R. Danzer, T. Lube, in: Ceram. Mater. Components for Eng. Japan Fine Ceramics Association, Tokyo 1998, 683.
98. T. Fett, D. Munz, J. Am. Ceram. Soc. 1985, 68, C213.
99. R. G. A. Baierl, Langsames Rißwachstum in Aluminiumoxid, Diplomarbeit am Institut für Struktur- und Funktionskeramik, Montanuniversität Leoben, 1999, 83.
100. H. Richter, G. Kleer, W. Heider, R. Röttenbacher, Mat. Sci. Eng. 1985, 71, 203.
101. H. Hempel, H. Wiest, ASME Paper No. 86-GT-199 1986.
102. T. Soma, Y. Ishida, M. Matsui, I. Oda, Adv. Ceram. Mater. 1987, 2, 809.
103. T. Kawakubo, K. Komeya, J. Am. Ceram. Soc. 1987, 70, 400.
104. M. J. Reece, F. Guiu, M. F. R. Sammur, J. Am. Ceram. Soc. 1989, 72, 348.
105. C. J. Gilbert, R. H. Dauskardt, R. O. Ritchie, J. Am. Ceram. Soc. 1995, 78, 2291.
106. C. J. Gilbert, J. J. Cao, W. J. Moberlychan, L. C. DeJonghe, R. O. Ritchie, Acta Mater. 1996, 44, 3199.
107. M. Masuda, T. Soma, M. Matsui, J. Eur. Ceram. Soc. 1990, 6, 253.
108. S.-Y. Liu, I. W. Chen, J. Am. Ceram. Soc. 1994, 77, 2025.
109. R. H. Dauskardt, M. R. James, J. R. Porter, R. O. Ritchie, J. Am. Ceram. Soc. 1992, 75, 759.
110. R. Morrell, Handbook of Properties of Tech. & Eng. Ceram. Part 1: An Introduction for the Eng. and Designer, Her Majesty's Stationary Office, London, 1989.
111. T. Soma, Y. Ishida, M. Matsui, I. Oda, Adv. Ceram. Mat. 1987, 2, 809.
112. R. M. McMeeking, A. G. Evans, J. Am. Ceram. Soc. 1982, 65, 242.
113. J. Rodel, J. Eur. Ceram. Soc. 1992, 9, 325.
114. D. K. Shetty, J.-S. Wang, J. Am. Ceram. Soc. 1989, 72, 1158.
115. K. Kendall, N. M. Alford, S. R. Tan, J. D. Birchall, J. Mater. Res. 1986, 1, 120.
116. M. Lugovy, V. Slyunyayev, N. Orlovskaya, G. Blugan, J. Kubier, M. H. Lewis, Acta Mater. 2005, 53, 289.
117. T. Lube, J. Pascual Herrero, F. Chalvet, G. de Portu, J. Eur. Ceram. Soc. 2007, 27, 1449.
118. A. V. Virkar, J. L. Huang, R. A. Cutler, J. Am. Ceram. Soc. 1987, 70, 164.
119. J. Pascual Herrero, F. Chalvet, T. Lube, G. de Portu, Mater. Sci. Forum 2005, 492-493, 581.
120. H. M. Chan, Ann. Rev. Mat. Sci. 1997, 27, 249.
121. M. P. Rao, A. J. Sánchez-Herencia, G. E. Beltz, R. M. McMeeking, F. F. Lange, Sci. 1999, 286, 102.
122. G. de Portu, L. Micele, G. Pezzotti, Comp. B 2006, 37, 556.
123. T. Lube, Key Eng. Mat. 2007, 333, 87.
124. F. Erdogan, Comp. Eng. 1995, 5, 753.
125. R. Danzer, M. Fellner, A. Borger, M. Damani, Prakt. Met. Sonderb. 2003, 34, 451.
126. R. W. Rice, Adv. in Ceram. 1988, 22, 3.
127. A. J. Moulson, J. M. Herbert, Electroceram. Chapman & Hall, London, Weinheim, New York, Tokyo, Melbourne, Madras, 1997.
128. K. Uchino, Piezoelectric Actuators and Ultrasonic Motors, Kluwer Academic Publishers, Boston/Dordrecht/London, 1997.
129. K. Uchino, Ferroelectric Devices, Marcel Dekker, Inc., New York, Basel, 2000.
130. D. R. Clarke, J. Am. Ceram. Soc. 1999, 82, 485.
131. J. Pritchard, C. R. Bowen, F. Lowrie, Brit. Ceram. Trans. 2001, 100, 265.
132. R. M. McMeeking, Int. J. Fract. 2001, 108, 25.
133. B. Balzer, M. Hagemeister, P. Kocher, L. J. Gauckler, J. Am. Ceram. Soc. 2004, 87, 1932.
134. H. Cao, A. G. Evans, J. Am. Ceram. Soc. 1994, 77, 1783.
135. T. Fett, D. Munz, G. Thun, J. Mater. Sci. Let. 1999, 18, 1895.
136. T. Fett, D. Munz, G. Thun, J. Mater. Sci. Let. 1999, 18, 1899.
137. P. Supancic, J. Eur. Ceram. Soc. 2000, 20, 2009.
138. P. Supancic, Z. Wang, W. Harrer, R. Danzer, Key Eng. Mater. 2005, 290, 46.