PI control, PI-based state space control, and model-based predictive control for drive systems with elastically coupled loads-A comparative study

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 8, 2011, Pages 3647-3657

  Thomsen, Sönke ^a   Hoffmann, Nils ^a   Fuchs, Friedrich Wilhelm ^a  

^a UNIVERSITY OF KIEL   (Germany)

Author keywords

AC machine; adjustable speed drive; asynchronous motor; control of drive; predictive control; state feedback; test bench; vibrations

Indexed keywords

AC MACHINE; ADJUSTABLE SPEED DRIVES; ASYNCHRONOUS MOTOR; CONTROL OF DRIVE; PREDICTIVE CONTROL; TEST BENCHES;

AC GENERATOR MOTORS; CONTROL THEORY; DYNAMICS; PREDICTIVE CONTROL SYSTEMS; SPEED; SPEED CONTROL; SPEED REGULATORS; STATE FEEDBACK; TORSIONAL STRESS; TWO TERM CONTROL SYSTEMS; VARIABLE SPEED DRIVES;

MODEL PREDICTIVE CONTROL;

EID: 79960357070     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2089950     Document Type: Article

References (54)

1. F. Blaabjerg and P. Thoegersen, "Adjustable speed drives-Future challenges and applications," in Proc. IPEMC, Aug. 2004, vol. 1, pp. 36-45. (Pubitemid 40539691)
2. N. Amann, J. Böcker, and F. Prenner, "Active damping of drive train oscillations for an electrically driven vehicle," IEEE/ASME Trans.Mechatronics, vol. 9, no. 4, pp. 697-700, Dec. 2004. (Pubitemid 40181624)
3. Y. Hori, H. Sawada, and Y. Chun, "Slow resonance ratio control for vibration suppression and disturbance rejection in torsional system," IEEE Trans. Ind. Electron., vol. 46, no. 1, pp. 162-168, Feb. 1999.
4. S. K. Salman and A. L. J. Teo, "Windmill modeling consideration and factors influencing the stability of a grid-connected wind power-based embedded generator," IEEE Trans. Power Syst., vol. 18, no. 2, pp. 793-802, May 2003.
5. A. Bähr and S. Beineke, "Mechanical resonance damping in an industrial servo drive," in Proc. EPE, Sep. 2007, pp. 1-10.
6. G. Zhang and J. Furusho, "Speed control of two-inertia system by PI/PID control," IEEE Trans. Ind. Electron., vol. 47, no. 3, pp. 603-609, Jun. 2000.
7. S. Preitl and R.-E. Precup, "An extension of tuning relations after symmetrical optimum method for PI and PID controller," Automatica, vol. 35, no. 10, pp. 1731-1736, Oct. 1999.
8. K. Szabat and T. Orlowska-Kowalska, "Performance improvement of industrial drives with mechanical elasticity using nonlinear adaptive Kalman filter," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1075-1084, Mar. 2008. (Pubitemid 351447550)
9. R. Muszynski and J. Deskur, "Damping of torsional vibrations in highdynamic industrial drives," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 544-552, Feb. 2010.
10. T. M. O'Sullivan, C. M. Bingham, and N. Schofield, "Enhanced servocontrol performance of dual-mass systems," IEEE Trans. Ind. Electron., vol. 54, no. 3, pp. 1387-1399, Jun. 2007.
11. K. Sugiura and Y. Hori, "Vibration suppression in 2- and 3-mass system based on the feedback of imperfect derivative of the estimated torsional torque," IEEE Trans. Ind. Electron., vol. 43, no. 1, pp. 56-64, Feb. 1996. (Pubitemid 126772858)
12. S. Katsura and K. Ohnishi, "Force servoing by flexible manipulator based on resonance ratio control," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 539-547, Feb. 2007. (Pubitemid 46444051)
13. K. Szabat and T. Orlowska-Kowalska, "Vibration suppression in a two-mass drive system using PI speed controller and additional feedbacks-Comparative study," IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 1193-1206, Apr. 2007. (Pubitemid 46591040)
14. R. Dhaouadi, K. Kubo, and M. Tobise, "Two-degree-of-freedom robust speed controller for high-performance rolling mill drives," IEEE Trans. Ind. Appl., vol. 29, no. 5, pp. 919-926, Sep./Oct. 1993.
15. R. L. Williams and D. A. Lawrence, Linear State-Space Control Systems. New York: Wiley, 2007.
16. Y. Hori, H. Iseki, and K. Sugiura, "Basic consideration of vibration suppression and disturbance rejection control of multi-inertia system using SFLAC (state feedback and load acceleration control)," IEEE Trans. Ind. Appl., vol. 30, no. 4, pp. 889-896, Jul./Aug. 1994.
17. R. Dhaouadi, K. Kubo, and M. Tobise, "Analysis and compensation of speed drive systems with torsional loads," IEEE Trans. Ind. Appl., vol. 30, no. 3, pp. 760-766, May/Jun. 1994.
18. J.-K. Ji and S.-K. Sul, "Kalman filter and LQ based speed controller for torsional vibration suppression in a 2-mass motor drive system," IEEE Trans. Ind. Electron., vol. 42, no. 6, pp. 564-571, Dec. 1995.
19. R. Zhang, Z. Chen, Y. Yang, and C. Tong, "Torsional vibration suppression control in the main drive system of rolling mill by state feedback speed controller based on extended state observer," in Proc. ICCA, 2007, pp. 2172-2177.
20. S. Thomsen and F. W. Fuchs, "Speed control of torsional drive systems with backlash," in Proc. EPE, Barcelona, Spain, Sep. 2009, pp. 1-10.
21. J.-K. Kang and S.-K. Sul, "Vertical-vibration control of elevator using estimated car acceleration feedback compensation," IEEE Trans. Ind. Electron., vol. 47, no. 1, pp. 91-99, Feb. 2000. (Pubitemid 32132934)
22. S. Katsura and K. Ohnishi, "Absolute stabilization of multimass resonant system by phase-lead compensator based on disturbance observer," IEEE Trans. Ind. Electron., vol. 54, no. 6, pp. 3389-3396, Dec. 2007.
23. S. Katsura, Y. Matsumoto, and K. Ohnishi, "Modeling of force sensing and validation of disturbance observer for force control," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 530-538, Feb. 2007. (Pubitemid 46444050)
24. K. Szabat, T. Orlowska-Kowalska, and M. Dybkowski, "Indirect adaptive control of induction motor drive system with an elastic coupling," IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4038-4042, Oct. 2009.
25. W. S. Levine, The Control Handbook, 1st ed. Boca Raton, FL: CRC, 1996, p. 158.
26. A. Hace, K. Jezernik, and A. Šabanovic, "SMC with disturbance observer for a linear belt drive," IEEE Trans. Ind. Electron., vol. 54, no. 6, pp. 3402-3412, Dec. 2007.
27. P. Korondi, H. Hashimoto, and V. Utkin, "Direct torsion control of flexible shaft in an observer based discrete-time sliding mode," IEEE Trans. Ind. Electron., vol. 45, no. 2, pp. 291-296, Apr. 1998. (Pubitemid 128739768)
28. K. Erenturk, "Nonlinear two-mass system control with sliding-mode and optimised proportional-integral derivative controller combined with a grey estimator," IET Control Theory Appl., vol. 2, no. 7, pp. 635-642, Jul. 2008.
29. S. J. Dodds and J. Vittek, "Sliding mode control of PMSM drives subject to torsion oscillations in themechanical load," in Proc. EPE-PEMC, 2008, pp. 2551-2558.
30. J. Vittek, P. Makys, M. Stulrajter, S. J. Dodds, and R. Perryman, "Comparison of sliding mode and forced dynamics control of electric drive with a flexible coupling employing PMSM," in Proc. ICIT, 2008, pp. 1-6.
31. ∞-control with a nonlinear observer for a two-mass system," IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 637-644, May/Jun. 2003.
32. K. Graichen, "Feedforward control design for finite-time transition problems of nonlinear systems with input and output constraints," Ph.D. dissertation, Univ. Stuttgart, Stuttgart, Germany, 2006.
33. S. Thomsen and F. W. Fuchs, "Flatness based speed control of drive systems with resonant loads," in Proc. IECON, 2010, pp. 120-125.
34. P. Cortes, M. P. Kazmierkowski, R. M. Kennel, D. E. Quevedo, and J. Rodriguez, "Predictive control in power electronics and drives," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4312-4324, Dec. 2008.
35. M. Cychowski, K. Szabat, and T. Orlowska-Kowalska, "Constrained model predictive control of the drive system with mechanical elasticity," IEEE Trans. Ind. Appl., vol. 56, no. 6, pp. 1963-1973, Jun. 2009.
36. R. Kennel, A. Linder, and M. Linke, "Generalized predictive control (GPC)-Ready for use in drive applications?," in Proc. PESC, Jun. 2001, vol. 4, pp. 1839-1844. (Pubitemid 32950491)
37. A. Linder and R. Kennel, "Model predictive control for electrical drives," in Proc. PESC, Jun. 2005, vol. 1, pp. 1793-1799. (Pubitemid 46379419)
38. P. Shi, B. Liu, and D. Hou, "Torsional vibration suppression of drive system based on DMC method," in Proc. WCICA, Jun. 2008, vol. 1, pp. 4789-4792.
39. M. Cychowski, K. Delaney, and K. Szabat, "Low-cost high-performance predictive control of drive systems with elastic coupling," in Proc. EPEPEMC, Sep. 2008, vol. 1, pp. 2241-2247.
40. K. Szabat, P. Serkies, T. Orlowska-Kowalska, and M. Cychowski, "Robust torque constraints handling in drive systems with elastic transmission," in Proc. ICIT, 2010, pp. 398-403.
41. P. N. Di, "Beitrag zur Reduktion diskreter Schwingungsketten auf ein Minimalmodell (Contribution for reduction of discrete vibration systems to a minimal model)," Ph.D. dissertation, RWTH, Aachen, Germany, 1981.
42. S. Bolognani, A. Venturato, and M. Zigliotto, "Theoretical and experimental comparison of speed controllers for elastic two-mass-systems," in Proc. PESC, 2000, vol. 3, pp. 1087-1092. (Pubitemid 32190303)
43. H. Wertz, S. Beineke, N. Frohleke, S. Bolognani, K. Unterkofler, M. Zigliotto, and M. Zordan, "Computer aided commissioning of speed and position control for electrical drives with identification of mechanical load," in Conf. Rec. IEEE IAS Annu. Meeting, 1999, vol. 4, pp. 2372-2379. (Pubitemid 30544284)
44. S. Thomsen, N. Hoffmann, and F. W. Fuchs, "Comparative study of conventional PI-control, PI-based state space control and model based predictive control for drive systems with elastic coupling," in Proc. ECCE, 2010, pp. 2827-2835.
45. T Kailath, Linear Systems. Englewood Cliffs, NJ: Prentice-Hall, 1980.
46. C. E. Garcia, D. M. Prett, and M. Morari, "Model predictive control: Theory and practice-A survey," Automatica, vol. 25, no. 3, pp. 335-348, May 1989. (Pubitemid 20612627)
47. K. Krämer and H. Unbehauen, "Aspects in selecting predictive adaptive control algorithms," in Proc. Amer. Control Conf., Jun. 1992, pp. 2396-2401. (Pubitemid 23610949)
48. E. F. Camacho and C. Bordons, Model Predictive Control, 2nd ed. Berlin, Germany: Springer-Verlag, 2007.
49. D. W. Clarke, C. Mohtadi, and P. S. Tuffs, "Generalized predictive control-Part I. The basic algorithm," Automatica, vol. 23, no. 2, pp. 137-148, Mar. 1987. (Pubitemid 17600158)
50. D. W. Clarke, C. Mohtadi, and P. S. Tuffs, "Generalized predictive control-Part II. Extensions and interpretations," Automatica, vol. 23, no. 2, pp. 149-160, Mar. 1987. (Pubitemid 17600157)
51. B. D. Robinson and D. W. Clarke, "Robustness effects of a prefilter in generalised predictive control," Proc. Inst. Elect. Eng.-Control Theory Appl., vol. 138, no. 1, pp. 2-8, Jan. 1991.
52. L. Wang, Model Predictive Control System Design and Implementation Using MATLAB. Berlin, Germany: Springer-Verlag, 2009, pp. 45-46.
53. N. Hoffmann, S. Thomsen, and F. W. Fuchs, "Model based predictive speed control of a drive system with torsional loads-A practical approach," in Proc. EPE-PEMC, 2010, pp. 149-156.
54. N. Hoffmann, S. Thomsen, and F. W. Fuchs, "Appropriate tuning and robust design of a generalized predictive speed controller for drive systems with resonant loads," in Proc. ECCE, 2010, pp. 764-771.