Model based predictive speed control of a drive system with torsional loads - A practical approach

Proceedings of EPE-PEMC 2010 - 14th International Power Electronics and Motion Control Conference

Volumn , Issue , 2010, Pages 149-156

  Hoffmann, Nils ^a   Thomsen, Sönke ^a   Fuchs, Friedrich W ^a  

^a UNIVERSITY OF KIEL   (Germany)

Author keywords

AC machine; Adjustable speed drive; Asynchronous motor; Control of drive; Test bench; Torsional resonance

Indexed keywords

AC MACHINERY; INDUCTION MOTORS; MODEL PREDICTIVE CONTROL; PREDICTIVE CONTROL SYSTEMS; RESONANCE; SPEED; SPEED CONTROL; STRUCTURAL LOADS; TORSIONAL STRESS; VARIABLE SPEED DRIVES;

AC MACHINE; ADJUSTABLE SPEED DRIVES; CONTROL OF DRIVE; TEST BENCHES; TORSIONAL RESONANCES;

SPEED REGULATORS;

EID: 78650412140     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/EPEPEMC.2010.5606693     Document Type: Conference Paper

References (29)

1. Blaabjerg, F. and Thoegersen, P.: Adjustable speed drives -- future challenges and applications. In Proc. of IPEMC 04, vol. 1, pp. 36-- 45, Aug. 2004.
2. Götting, G. and De Doncker, R.W.: Active drive control of electric vehicles using a modal state observer. In Proc. of PESC 04, vol. 6, pp. 4585-4590, June 2004.
3. Hori, Y., Sawada, H. and Chun, Y.: Slow Resonance Ratio Control for Vibration Suppression and Disturbance Rejection in Torsional System. In IEEE Trans. on Industrial Electronics, vol. 46, no. 1, pp. 162-168, Feb. 1999.
4. Salman, S.K. and Teo, A.L.J.: Windmill Modeling Consideration and Factors Influencing the Stability of a Grid-connected Wind Power-based Embedded Generator. In IEEE Trans. on Power Systems, vol. 18, no. 2, pp. 793-802, May 2003.
5. Leonhard, W.: Control of electrical drives. 3.Edt. Berlin, Heidelberg, New York: Springer-Verlag, 2001.
6. Kazmierkowski, M.P., Krishnan, R. and Blaabjerg, F.: Control in Power Electronics -- Selected Problems. 1.Edt. San Diago, London: Academic Press, 2002, pp. 176-190.
7. Ellis, G. and Lorenz, R.D.: Resonant Load Control Methods for Industrial Servo Drives. In Proc. of IAC 2000, vol. 3, pp. 1438- 1445, Oct. 2000.
8. Zhang, G. and Furusho, J.: Speed Control of Two-Inertia System by PI/PID Control. In IEEE Trans. on Industrial Electronics, vol. 47, no. 3, pp. 603-609, June 2000.
9. Nordin, M. and Gutman, P.-O.: Controlling Mechanical Systems with Backlash -- A Survey. Automatica, vol. 38, no. 10, pp. 1633- 1649, Oct. 2002.
10. Cortes, P., Kazmierkowski, M.P., Kennel, R.M., Quevedo, D.E. and Rodriguez, J.: Predictive Control in Power Electronics and Drives. In IEEE Trans. on Industrial Electronics, vol. 55, no. 12, pp. 4312- 4324, Dec. 2008.
11. Linder, A. and Kennel, R.: Model Predictive Control for Electrical Drives. In Proc. of PESC 05, vol. 1, pp. 1793-1799, June 2005.
12. Shi, P., Liu B. and Hou, D.: Torsional Vibration Suppression of Drive System Based on DMC Method. In Proc. of WCICA 08, vol. 1, pp. 4789-4792, June 2008.
13. Cutler, C.R. and Ramaker, B.C.: Dynamic Matrix Control -- A Computer Control Algorithm. In Proc. of Automatic Control Conference, San Francisco, 1980.
14. Cychowski, M., Delaney, K. and Szabat K.: Low-Cost High- Performance Predictive Control of Drive Systems with Elastic Coupling. In Proc. of EPE-PEMC 08, vol. 1, pp. 2241-2247, Sept. 2008.
15. Cychowski, M., Szabat, K. and Orlowska-Kowalska, T.: Constrained Model Predictive Control of the Drive System with Mechanical Elasticity. In IEEE Trans. on Industrial Applications, vol. 56, no. 6, pp. 1963-1973, June 2009.
16. Dresig, H.: Schwingungen mechanischer Antriebssysteme -- Modellbildung, Berechnung, Analyse, Synthese.(German) (Oscillations in mechanical drive systems -- modeling, calculation, analysis, synthesis) 2.Edt. Berlin, Heidelberg, New York: Springer- Verlag, 2006, pp. 119-124, pp. 153-172.
17. Di, P.N: Beitrag zur Reduktion diskreter Schwingungsketten auf ein Minimalmodell. (German) (Contribution for reduction of discrete vibration systems to a minimal model) dissertation, Aachen, RWTH, Dr.-Ing. Diss., 1981.
18. Garcia, C.E., Prett, D.M. and Morari, M.: Model Predictive Control: Theory and Practice -- a Survey. In Automatica, vol. 25, no. 3, pp. 335-348, 1989.
19. Krämer, K. and Unbehauen, H.: Aspects in Selecting Predictive Adaptive Control Algorithms. In Proc. of American Control Conference, pp. 2396-2401, June 1992.
20. Camacho, E.F. and Bordons, C.: Model Predictive Control. 2.Edt. Berlin, Heidelberg, New York: Springer-Verlag, 2007.
21. Clarke, D.W., Mohtadi, C. and Tuffs, P.S.: Generalized Predictive Control- Part I. The Basic Algorithm. In Automatica, vol. 23, no.2, pp. 137-148, 1987.
22. Clarke, D.W., Mohtadi, C. and Tuffs, P.S.: Generalized Predictive Control- Part II. Extensions and Interpretations. In Automatica, vol. 23, no.2, pp. 149-160, 1987.
23. Robinson, B.D. and Clarke, D.W.: Robustness effects of a Prefilter in generalised predictive control. In IEE Proc. of Control Theory and Applications, vol. 138, no.1, pp. 2-8, Jan. 1991.
24. Schröder, D.: Elektrische Antriebe - Regelung von Antriebssystemen. 2.Aufl. Berlin, Heidelberg, New York: Springer- Verlag, 2001.
25. Wang, L.: Model Predictive Control System Design and Implementation Using MATLAB®. Berlin, Heidelberg, New York,: Springer-Verlag, 2009, pp. 45-46.
26. Thomsen, S. and Fuchs F.W.: Speed Control of Torsional Drive Systems with Backlash. In Proc. of EPE 2009 Barcelona, ISBN: 9789075815009, Sept. 2009.
27. Bolognani, S., Venturato, A. and Zigliotto, M.: Theoretical and Experimental Comparison of Speed Controllers for Elastic Two- Mass-Systems. In Proc. of PESC 00, vol. 3, pp. 1087-1092, 2000.
28. Levine, W.S.: The Control Handbook. 1.Edt. Boca Raton, London, New York, Washington D.C.: CRC-Press, 1996, p. 158.
29. Wertz, H., Beineke, S., Frohleke, N., Bolognani, S., Unterkofler, K., Zigliotto, M. and Zordan, M.: Computer aided Commissioning of Speed and Position Control for Electrical Drives with Identification of Mechanical Load. In Proc. of Industry Applications Conference 99, vol. 4, pp. 2372-2379, 1999.