Laser two-photon polymerization micro- and nanostructuring over a large area on various substrates

Progress in Biomedical Optics and Imaging - Proceedings of SPIE

Volumn 7715, Issue , 2010, Pages

  Malinauskasa, M ^a   Purlys, V ^a   Zukauskas A ^a   Bickauskaite G ^a   Gertus, T ^a   Danilevicius P ^a   Paipulas, D ^a   Rutkauskas, M ^a   Gilbergs, H ^a   Baltriukiene, D ^b   Bukelskis, L ^b   Sirmenis R ^b   Bukelskiene, V ^b   Gadonas, R ^a   Sirvydis, V ^b   Piskarskas, A ^a  

^a VILNIUS UNIVERSITY   (Lithuania)

^b VILNIUS UNIVERSITY   (Lithuania)

Author keywords

3D nanolithography; Artificial scaffolds; Femtosecond laser microfabrication; Microoptics; Photonics; Photopolymerization; Stem cells; SZ2080

Indexed keywords

3D NANOLITHOGRAPHY; ARTIFICIAL SCAFFOLDS; FEMTOSECOND LASER MICROFABRICATION; STEM CELL; SZ2080;

BIOLOGICAL MATERIALS; CELL PROLIFERATION; COMPUTER AIDED DESIGN; GROWTH KINETICS; HEALTH CARE; MICROANALYSIS; MICROFABRICATION; MICROFLUIDICS; MICROMACHINING; MICROMECHANICS; MICROOPTICS; NANOLITHOGRAPHY; PHOTONIC CRYSTALS; PHOTONIC DEVICES; PHOTONICS; PHOTONS; PHOTOPOLYMERIZATION; PHOTOPOLYMERS; POLYMERIC GLASS; SCAFFOLDS; STEM CELLS; THREE DIMENSIONAL; ULTRASHORT PULSES; YTTERBIUM;

PULSED LASERS;

EID: 78751631377     PISSN: 16057422     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.854507     Document Type: Conference Paper

References (60)

1. Naulleau, P. P., Anderson, C. N., Chiu, J., Denham, P., George, S., Goldberg, K. A., Goldstein, M., Hoef, B., Hudyma, R., Jones, G., Koh, C., La Fontaine, B., Ma, A., Montgomery, W., Niakoula, D., Park, J.-on, Wallow, T., Wurm, S., "22-nm Half-pitch extreme ultraviolet node development at the SEMATECH Berkeley microfield exposure tool," Microelectron. Eng. 86(4-6), 448 - 455 (2009).
2. Sunne, G. R., [Electron Beam Lithography for Nanofabrication], PhD thesis, University of Barcelona, Barcelona, 17-21 (2008).
3. Di Fabrizio, E., Fillipo, R., Cabrini, S., Kumar, R., Perennes, F., Altissimo, M., Businaro, L., Cojac, D., Vaccari, L., Prasciolu, M. and Candeloro, P., "X-ray lithography for micro- and nano-fabrication at ELETTRA for interdisciplinary applications," J. Phys.: Condens. Matter 16(33), 3517-3535 (2004).
4. Schift, H., "Nanoimprint lithography: An old story in modern times? A review," J. Vac. Sci. Technol. B 26(2), 458- 480, Mar/Apr (2008).
5. Walther, M., Ortner, A., Meier, H., Löffelmann, U., Smith, P. J. and Korvink, J. G., "Terahertz metamaterials fabricated by inkjet printing", Appl. Phys. Lett. 95(25), 251107 (2009).
6. Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S. and Bhaduri, S., "Drop-on-demand printing of cells and materials for designer tissue constructs," Mat. Sci. Eng. C 27(3), 372-376 (2007).
7. Benkreira, H., and Khan, M. I., "Air entrainment in dip coating under reduced air pressures," Chem. Eng. Sci. 63(2), 448-459 (2008).
8. Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S. and Cha, S.W., "Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends," Biomaterials 24(18), 3115-3123 (2003).
9. Maruo, S., Nakamura, O. and Kawata, S., "Three-dimensional microfabrication with two-photon-absorbed photopolymerization," Opt. Lett. 22, 132-134 (1997).
10. Mizeikis, V., Seet, K. K., Juodkazis, S. and Misawa, H., "Three-dimensional woodpile photonic crystal templates for the infrared spectral range," Opt. Lett. 29, 2061-2063 (2004).
11. Deubel, M., von Freymann, G., Wegener, M., Pereira, S., Busch, K., Soukoulis, C. M., "Direct laser writing of three-dimensional photonic-crystal templates for telecommunications," Nat. Mater. 3(7), 444-447 (2004).
12. Serbin, J., Ovsianikov, A. and Chichkov, B., "Fabrication of woodpile structures by two-photon polymerization and investigation of their optical properties," Opt. Express 12, 5221-5228 (2004).
13. Guo, R., Xiao, S., Zhai, X., Li, J., Xia, A. and Huang, W., "Micro lens fabrication by means of femtosecond two photon photopolymerization," Opt. Express 14, 810-816 (2006).
14. Malinauskas, M., Gilbergs, H., Žukauskas, A., Purlys, V., Paipulas, D. and Gadonas, R., "A femtosecond laserinduced two-photon photopolymerization technique for structuring microlenses," J. Opt. 12(3), 035204 (2010).
15. Maruo, S., Takaura, A. and Saito, Y., "Optically driven micropump with a twin spiral microrotor," Opt. Express 17, 18525-18532 (2009).
16. Wu, D., Chen, Q. D., Niu, L. G., Wang, J. N., Wang, J., Wang, R., Xia, H., Sun, H. B., "Femtosecond laser rapid prototyping of nanoshells and suspending components towards microfluidic devices," Lab. Chip. 9(16), 2391-2394 (2009).
17. Narayan, R. J., Jin, C., Doraiswamy, A., Mihailescu, I. N., Jelinek, M., Ovsianikov, A., Chichkov, B. N., Chrisey, D. B., "Laser processing of advanced bioceramics," Adv. Eng. Mater. 7(12), 1083-1098 (2005).
18. Ovsianikov, A., Chichkov, B., Adunka, O., Pillsbury, H., Doraiswamy, A. and R. J. Narayan, "Rapid prototyping of ossicular replacement prostheses," Appl. Surf. Sci. 253(15), 6603-6607 (2007).
19. Ovsianikov, A., Schlie, S., Ngezahayo, A., Haverich, A. and Chichkov, B. N., "Two-photon polymerization technique for microfabrication of CAD-designed 3D scaffolds from commercially available photosensitive materials," J. Tissue. Eng. Regen. Med. 1, 443-449 (2007).
20. Claeyssens, F., Hasan, E. A., Gaidukevičiūtė, A., Achilleos, D. S., Ranella, A., Reinhardt, C., Ovsianikov, A., Shizhou, X., Fotakis, C., Vamvakaki, M., Chichkov, B. N. and Farsari, M., "Three-Dimensional Biodegradable Structures Fabricated by Two-Photon Polymerization," Langmuir 25(5), 3219-3223 (2009).
21. Ha, Y. M., Choi, J. W., Lee, S. H., "Mass production of 3-D microstructures using projection microstereolithography," J. Mec. Sci. and Technol. 22(3), 5154-521 (2008).
22. Park, I. B., Ha, Y. M. and Lee, S. H., "Cross-section segmentation for improving the shape accuracy of microstructure array in projection microstereolithography," Int. J. Adv. Manuf. Technol. 46, 151-161(2010).
23. Yang, D. Y., Park, S. H., Lim, T. W., Kong, H. J., Yi, S. W., Yang, H. K. and Lee, K. S., "Ultraprecise microreproduction of a three-dimensional artistic sculpture by multipath scanning method in two-photon photopolymerization", Appl. Phys. Lett. 90(1), 013113 (2007).
24. Malinauskas, M., Gilbergs, H., Purlys, V., Žukauskas, A., Rutkauskas, M., Gadonas, R., "Femtosecond laserinduced two-photon photopolymerization for structuring of micro-optical and photonic devices," Proc. SPIE 7366, 736622 (2009).
25. Gonsalves, K. E., Merhari, L, Wu, H., Hu, Y., "Organic-Inorganic Nanocomposites: Unique Resists for Nanolithography," Adv. Mater. 13(10), 703 - 714, (2001).
26. Sakellari, I., Gaidukevičiūtė, A., Giakoumaki, A., Gray, D., Fotakis, C., Vamvakaki, M., Farsari, M., Reinhardt, C., Ovsianikov, A., Chichkov, B. N., "Direct laser writing of photonic nanostructures, " Proc. SPIE 7392, 73920Y (2009).
27. Tanaka, T., Ishikawa, A. and Kawata, S., "Two-photon-induced reduction of metal ions for fabricating threedimensional electrically conductive metallic microstructure," Appl. Phys. Lett. 88(8), 081107 (2006).
28. Mizeikis, V., Juodkazis, S., Tarozaite, R., Juodkazytė, J., Juodkazis, K. and Misawa, H., "Fabrication and properties of metalo-dielectric photonic crystal structures for infrared spectral region," Opt. Express 15, 8454-8464 (2007).
29. Rill, M. S., Plet, C., Thiel, M., Staude, I., von Freymann, G., Linden, S. and Wegener, M., "Photonic metamaterials by direct laser writing and silver chemical vapour deposition," Nat. Mater. 7, 543 - 546 (2008).
30. Vurth, L., Baldeck, P., Stephan, O. and Vitrant, G, "Two-photon induced fabrication of gold microstructures in polystyrene sulfonate thin films using a ruthenium(II) dye as photoinitiator," Appl. Phys. Lett. 92(17), 171103 (2008).
31. Park, S. H., Lim, T. W., Yang, D. Y., Kim, R. H. and Lee, K. S., "Improvement of Spatial Resolution in Nano-Stereolithography Using Radical Quencher," Macromol. Res. 14(5), 559-564 (2006).
32. Haske, W., Chen, V. W., Hales, J. M., Dong, W., Barlow, S., Marder, S. R. and Perry, J. W., "65 nm feature sizes using visible wavelength 3-D multiphoton lithography", Opt. Express 15(6), 3426-3436 (2007).
33. Dong, X.-Z., Zhao, Z.-S. and Duan, X. M., "Improving spatial resolution and reducing aspect ratio in multiphoton polymerization nanofabrication," Appl. Phys. Lett. 92(9), 091113 (2008).
34. http://www.nanoscribe.de/.
35. http://www.lzh.de/sites/default/files/brochures/ machinesfor2and3dmicroandnanotechnology.pdf.
36. http://www.newport.com/file-store/Optics-and-Mechanics/AppsNote37.pdf.
37. http://www.teemphotonics.com/products/microfab.html.
38. Passinger, S., Ovsianikov, A., Kiyan, R., Reinhardt, C., Ostendorf, A. and Chichkov, B. N., "Two-Photon Polymerization for industrial applications," Proc. of LPM2007-the 8th International Symposium on Laser Precision Microfabrication, (2007).
39. Malinauskas, M., Purlys, V., Rutkauskas, M., and Gadonas, R., "Two-photon polymerization for fabrication of three-dimensional micro- and nanostructures over a large area," Proc. SPIE 7204, 72040C (2009).
40. Stampfl, J., Inführ, R., Stadlmann, K., Pucher, N., Schmidt, V. and Liska, R., "Materials for the fabrication of optical waveguides with two photon photopolymerization," Proc. of the Fifth International WLT-Conference on Lasers in Manufacturing, Munich, (2009).
41. Malinauskas, M., Purlys, V., Rutkauskas, M., Gaidukevičiūte, A. and Gadonas, R., "Femtosecond Visible Light Induced Two-Photon Photopolymerization for 3D Micro/Nanostructuring in Photoresists and Photopolymers," Lithuanian J. Phys., to be printed (2010).
42. Malinauskas, M., Danilevičius, P., Baltriukiene, D., Rutkauskas, M., Žukauskas, A., Kairyte, Ž., Bičkauskaite, G., Purlys, V., Paipulas, D., Bukelskiene, V. and Gadonas, R., "3D artificial polymeric scaffolds for stem cell growth fabricated by femtosecond laser," Proc. of Northern Optics 2009 conference to be printed in special issue Lithuanian J. Phys., (2010).
43. Malinauskas, M., Purlys, V., Žukauskas, A., Rutkauskas, M., Danilevičius, P., Paipulas, D., Bičkauskaite, G., Bukelskis, L., Baltriukiene, D., Širmenis, R., Gaidukevičiūte, A., Bukelskiene, V., Gadonas, R., Sirvydis, V. and Piskarskas, A., "Large Scale Laser Two-Photon Polymerization Structuring for Fabrication of Artificial Polymeric Scaffolds for Regenerative Medicine," Proc. of ICO-Photonics: Emerging Trends & Novel Materials in Photonics 2009, to be printed (2010).
44. Takada, K., Sun, H. B. and Kawata, S., "The study on spatial resolution in two-photon induced polymerization," Proc. SPIE 6110, 61100A (2006).
45. Li, Y., Cui, H., Qi, F., Yang, H. and Gong, Q., "Uniform suspended nanorods fabricated by bidirectional scanning via two-photon photopolymerization," Nanotechnology 19, 375304 (2008).
46. Park, S. H., Kim, K. H., Lim, T. W., Yang, D. Y. and Lee, K. S., "Investigation of three-dimensional pattern collapse owing to surface tension using an imperfection finite element model," Microelectron. Eng. 85(2), 432 - 439 (2008).
47. Sun, Q., Juodkazis, S., Murazawa, N., Mizeikis, V. and Misawa, H., "Freestanding and movable photonic microstructures fabricated by photopolymerization with femtosecond laser pulses" J. Micromech. Microeng. 20, 035004 (2010).
48. Malinauskas, M., Bičkauskaite, G., Rutkauskas, M., Paipulas, D., Purlys, V. and Gadonas, R., "Self-Polymerization of Nano-Fibers and Nano-Membranes Induced by Two-Photon Absorption," Proc. of Northern Optics 2009 conference to be printed in special issue Lithuanian J. Phys., (2010).
49. http://www.altechna.com/.
50. Charruyer, A. and Ghadially, R., "Stem cells and tissue-engineered skin," Skin Pharmacol. Physiol. 22(2), 55-62 (2009).
51. Zimmermann, W. H., Melnychenko, I. and Eschenhagen, T., "Engineered heart tissue for regeneration of diseased hearts," Biomaterials 25(9), 1639-1647 (2004).
52. Mantesso, A. and Sharpe, P., "Dental stem cells for tooth regeneration and repair," Expert Opin. Biol. Ther. 9(9), 1143-1154 (2009).
53. Subramanian, A., Krishnan, U. M. and Sethuraman, S., "Development of biomaterial scaffold for nerve tissue engineering: Biomaterial mediated neural regeneration," J. Biomed. Sci. 16, 108 (2009).
54. Atala, A., "Tissue engineering, stem cells, and cloning for the regeneration of urologic organs," Clin. Plast. Surg. 30(4), 649-667 (2002).
55. Ringe, J., Kaps, C., Burmester, G. R. and Sittinger, M., "Stem cells for regenerative medicine: advances in the engineering of tissues and organs," Naturwissenschaften 89, 338-351 (2002).
56. Sittinger, M., Bujia, J., Rotter, N., Reitzel, D., Minuth, W. W. and Burmester, G. R., "Tissue engineering and autologous transplant formation: practical approaches with resorbable and new cell culture techniques," Biomaterials 17, 237-242 (1996).
57. Hodgkinson, T., Yuan, X. F. and Bayat, A., "Adult stem cells in tissue engineering" Expert Rev. Med. Devices, 6(6), 621-640 (2009).
58. Ovsianikov, A., Viertl, J., Chichkov, B., Oubaha, M., MacCraith, B., Sakellari, I., Giakoumaki, A., Gray, D., Vamvakaki, M., Farsari, M. and Fotakis, C., "Ultra-Low Shrinkage Hybrid Photosensitive Material for Two-Photon Polymerization Microfabrication," ACS Nano 2(11), 2257-2262 (2008).
59. Ovsianikov, A., Chichkov, B. N., Malinauskas, M., Schlie, S., Ngezahayo, A., Gittard, S., Narayan, R., "Twophoton polymerization of poly(ethylene glycol) materials for biomedical applications," (submited).
60. Žukauskas, A., Malinauskas, M., Kontenis, L., Purlys, V., Paipulas, D., Vengris, M. and Gadonas, R., "Organic Dyes Doped Microstructures for Optically Active Functional Devices Fabricated via Two-Photon Polymerization Technique," Proc. of Northern Optics 2009 conference to be printed in special issue Lithuanian J. Phys., (2010).