Push-out bond strength of CAD/CAM-ceramic luted to dentin with self-adhesive resin cements

Dental Materials

Volumn 26, Issue 9, 2010, Pages 855-863

  Flury, Simon ^a   Lussi, Adrian ^a   Peutzfeldt, Anne ^a   Zimmerli, Brigitte ^a  

^a UNIVERSITY OF BERN   (Switzerland)

Author keywords

Ceramic restoration; Computer aided design manufacturing; Luting agents; Storage; Thermocycling

Indexed keywords

ADHESIVE FAILURE; ARTIFICIAL AGEING; BOND STRENGTH; CAD/CAMS; CERAMIC RESTORATION; CERAMIC RESTORATIONS; CLASS I; COHESIVE FAILURES; FRACTURE PATTERN; HUMAN MOLARS; PUSH-OUT; RESIN CEMENT; SELF-ADHESIVE; STATISTICAL ANALYSIS; STORAGE CONDITION; THERMAL CYCLE; THERMOCYCLING; WATER STORAGE; WILCOXON RANK-SUM TESTS;

BOND STRENGTH (MATERIALS); CERAMIC MATERIALS; FAILURE ANALYSIS; FRACTURE; RESINS; RESTORATION; SCANNING ELECTRON MICROSCOPY; STATISTICAL TESTS; THERMAL CYCLING;

CEMENTS;

DENTIN BONDING AGENT; RESIN CEMENT;

ARTICLE; COMPUTER AIDED DESIGN; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; EVALUATION; HUMAN; MATERIALS TESTING; METHODOLOGY; NONPARAMETRIC TEST; SCANNING ELECTRON MICROSCOPY; TOOTH PROSTHESIS;

COMPUTER-AIDED DESIGN; DENTAL BONDING; DENTAL CAVITY PREPARATION; DENTAL PORCELAIN; DENTAL RESTORATION, PERMANENT; DENTAL STRESS ANALYSIS; DENTIN-BONDING AGENTS; HUMANS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; RESIN CEMENTS; SMEAR LAYER; STATISTICS, NONPARAMETRIC;

EID: 77955498498     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2010.05.001     Document Type: Article

References (40)

1. M. Hayashi, Y. Tsuchitani, M. Miura, F. Takeshige, and S. Ebisu 6-Year clinical evaluation of fired ceramic inlays Oper Dent 23 1998 318 326
2. M. Hayashi, Y. Tsuchitani, Y. Kawamura, M. Miura, F. Takeshige, and S. Ebisu Eight-year clinical evaluation of fired ceramic inlays Oper Dent 25 2000 473 481
3. M.K. Molin, and S.L. Karlsson A randomized 5-year clinical evaluation of 3 ceramic inlay systems Int J Prosthodont 13 2000 194 200
4. R. Frankenberger, M. Taschner, F. Garcia-Godoy, A. Petschelt, and N. Krämer Leucite-reinforced glass ceramic inlays and onlays after 12 years J Adhes Dent 10 2008 393 398
5. A.K. Hulterström, and M. Bergman Polishing systems for dental ceramics Acta Odontol Scand 51 1993 229 234
6. D.J. Fasbinder Clinical performance of chairside CAD/CAM restorations J Am Dent Assoc 137 Suppl. 2006 22S 31S
7. J.G. Wittneben, R.F. Wright, H.P. Weber, and G.O. Gallucci A systematic review of the clinical performance of CAD/CAM single-tooth restorations Int J Prosthodont 22 2009 466 471
8. A. Bindl, B. Richter, and W.H. Mörmann Survival of ceramic computer-aided design/manufacturing crowns bonded to preparations with reduced macroretention geometry Int J Prosthodont 18 2005 219 224
9. J.W. Van Dijken, C. Höglund-Aberg, and A.L. Olofsson Fired ceramic inlays: a 6-year follow up J Dent 26 1998 219 225
10. J.W. Van Dijken Resin-modified glass ionomer cement and self-cured resin composite luted ceramic inlays. A 5-year clinical evaluation Dent Mater 19 2003 670 674
11. N. Escribano, and J.C. De La Macorra Microtensile bond strength of self-adhesive luting cements to ceramic J Adhes Dent 8 2006 337 341
12. J. Manhart, H. Chen, G. Hamm, and R. Hickel Buonocore Memorial Lecture. Review of the clinical survival of direct and indirect restorations in posterior teeth of the permanent dentition Oper Dent 29 2004 481 508
13. I. Radovic, F. Monticelli, C. Goracci, Z.R. Vulicevic, and M. Ferrari Self-adhesive resin cements: a literature review J Adhes Dent 10 2008 251 258
14. M. Sarr, A. Mine, J. De Munck, M.V. Cardoso, A.W. Kane, and J. Vreven Immediate bonding effectiveness of contemporary composite cements to dentin Clin Oral Invest 2009 [Epub ahead of print]
15. Y. Kitasako, M.F. Burrow, N. Kathahira, T. Nikaido, and J. Tagami Shear bond strengths of three resin cements to dentine over 3 years in vitro J Dent 29 2001 139 144
16. A.A. El Zohairy, A.J. De Gee, M.M. Mohsen, and A.J. Feilzer Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks Dent Mater 19 2003 575 583
17. A. Piwowarczyk, R. Bender, P. Ottl, and H.C. Lauer Long-term bond between dual-polymerizing cementing agents and human hard dental tissue Dent Mater 23 2007 211 217
18. A. Cantoro, C. Goracci, F. Papacchini, C. Mazztelli, G.M. Fadda, and M. Ferrari Effect of pre-cure temperature on the bonding potential of self-etch and self-adhesive resin cements Dent Mater 24 2008 577 583
19. C. D'Arcangelo, F. De Angelis, M. D'Amario, S. Zazzeroni, C. Ciampoli, and S. Caputi The influence of luting systems on the microtensile bond strength of dentin to indirect resin-based composite and ceramic restorations Oper Dent 34 2009 328 336
20. R.G. Viotti, A. Kasaz, C.E. Pena, R.S. Alexandre, C.A. Arrais, and A.F. Reis Microtensile bond strength of new self-adhesive luting agents and conventional multistep systems J Prosthet Dent 102 2009 306 312
21. S. Scherrer, P.F. Cesar, and M.V. Swain Direct comparison of the bond strength results of the different test methods: a critical literature review Dent Mater 26 2010 e78 93
22. R. Frankenberger, J. Sindel, N. Krämer, and A. Petschelt Dentin bond strength and marginal adaptation: direct composite resins vs ceramic inlays Oper Dent 24 1999 147 155
23. P. Kienanen, P. Alander, L.V. Lassila, and P.K. Vallittu Bonding of ceramic insert to a laboratory particle filler composite Acta Odontol Scand 63 2005 272 277
24. I. Cekic, G. Ergun, S. Uctasli, and L.V.J. Lasilla In vitro evaluation of push-out bond strength of direct ceramic inlays to tooth surface with fibre reinforced composite at the interface J Prosthet Dent 97 2007 271 278
25. E. Brunner, and Munzel U Nichtparametrische Datenanalyse (in German) 2002 Springer Heidelberg 3-540-43375-9
26. N. Moszner, U. Salz, and J. Zimmermann Chemical aspects of self-etching enamel-dentin adhesives: a systematic review Dent Mater 21 2005 895 910
27. C. Mazzitelli, F. Monticelli, R. Osorio, A. Casucci, M. Toledano, and M. Ferrari Effect of simulated pulpal pressure on self-adhesive cements bonding to dentin Dent Mater 24 2008 1156 1163
28. J. De Munck, M. Vargas, K. Van Landuyt, K. Hikita, P. Lambrechts, and B. Van Meerbeek Bonding of an auto-adhesive luting material to enamel and dentin Dent Mater 20 2004 963 971
29. F. Monticelli, R. Osorio, C. Mazzitelli, M. Ferrari, and M. Toledano Limited decalcification/diffusion of self-adhesive cements into dentin J Dent Res 87 2008 974 979
30. W. Mörmann, D. Wolf, A. Ender, A. Bindl, T. Göhring, and T. Attin Effect of two self-adhesive cements on marginal adaptation and strength of esthetic ceramic CAD/CAM molar crowns J Prosthodont 18 2009 403 410
31. M. Behr, M. Hansmann, M. Rosentritt, and G. Handel Marginal adaptation of three self-adhesive resin cements vs. a well-tried adhesive luting agent Clin Oral Invest 13 2009 459 464
32. A.D. Vrochari, G. Eliades, E. hellwig, and K.T. Wrbas Water sorption and solubility of four self-adhesive resin luting agents J Adhes Dent 2010 [Epub ahead of print]
33. S. Brunzel, B. Yang, S. Wolfart, and M. Kern Tensile bond strength of a so-called self-adhesive luting resin cement to dentin J Adhes Dent 2009 [Epub ahead of print]
34. C. Holderegger, I. Sailer, C. Schuhmacher, R. Schläpfer, C. Hämmerle, and J. Fischer Shear bond strength of resin cements to human dentin Dent Mater 24 2008 944 950
35. A.K. Lührs, S. Guhr, H. Günay, and W. Geurtsen Shear bond strength of self-adhesive resins compared to resin cements with etch and rinse adhesives to enamel and dentin in vitro Clin Oral Invest 14 2010 193 199
36. K. Hikita, B. Van Meerbeek, J. De Munck, T. Ikeda, K. Van Landuyt, and T. Maida Bonding effectiveness of adhesive luting agents to enamel and dentin Dent Mater 23 2007 71 80
37. K. Bitter, S. Paris, C. Pfuertner, K. Neumann, and A.M. Kielbassa Morphological and bond strength evaluation of different resin cements to root dentin Eur J Oral Sci 117 2009 326 333
38. S.E. Abo-Hamar, K.A. Hiller, H. Jung, M. Federlin, K.H. Friedl, and G. Schmalz Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel Clin Oral Invest 9 2005 161 167
39. R. Frankenberger, U. Lohbauer, R.B. Schaible, S.A. Nikolaenko, and M. Naumann Luting of ceramic inlays in vitro: marginal quality of self-etch and etch-and-rinse adhesives versus self-etch cements Dent Mater 24 2008 185 191
40. M. Peumans, J. De Munck, K. Van Landuyt, A. Poitevin, A. Lambrechts, and B. Van Meerbeek Two-year clinical evaluation of a self-adhesive luting agent for ceramic inlays J Adhes Dent 2009 [Epub ahead of print]