Effect of two self-adhesive cements on marginal adaptation and strength of esthetic ceramic CAD/CAM molar crowns

Journal of Prosthodontics

Volumn 18, Issue 5, 2009, Pages 403-410

  Mörmann, Werner ^a   Wolf, Daniel ^a   Ender, Andreas ^a   Bindl, Andreas ^a   Göhring, Till ^a   Attin, Thomas ^a  

^a UNIVERSITY OF ZURICH   (Switzerland)

Author keywords

CAD CAM molar crowns; Crown strength; Dentinal fluid pressure; Esthetic ceramic; Marginal adaptation; Self adhesive cements; Thermo mechanical fatigue

Indexed keywords

DENTIN BONDING AGENT; KETAC CEM; KETAC-CEM; MAGNESIUM OXIDE; MULTILINK ADHESIVE SYSTEM; POLYCARBOXYLATE CEMENT; RELY X; RELY-X; RESIN CEMENT; VARIOLINK; ZINC OXIDE;

ARTICLE; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; ENDODONTICS; HUMAN; MECHANICAL STRESS; METHODOLOGY; TOOTH CROWN; TOOTH PROSTHESIS;

CROWNS; DENTAL BONDING; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTIN-BONDING AGENTS; HUMANS; MAGNESIUM OXIDE; MARGINAL ADAPTATION (DENTISTRY); POLYCARBOXYLATE CEMENT; RESIN CEMENTS; STRESS, MECHANICAL; ZINC OXIDE;

EID: 67651085489     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2009.00461.x     Document Type: Article

References (48)

1. Mörmann WH : The evolution of the Cerec system. J Am Dent Assoc 2006 137 : 7S 13S
2. Kelly JR : Machinable ceramics. In Mörmann WH (ed State of the Art of CAD/CAM Restorations, 20 Years of Cerec. Berlin, Quintessence, 2006, pp. 29 38
3. Bindl A, Lüthy H, Mörmann WH : Fracture load of CAD/CAM-generated slot-inlay FPDs. Int J Prosthodont 2003 16 : 653 660
4. Yoshida K, Meng X, Kamada K, et al : Influence of surface characteristics of four silica-based machinable ceramics on flexural strength and bond strength of a dual curing resin luting agent. J Adhes Dent 2007 9 : 407 413
5. Jung YG, Peterson IM, Kim DK, et al : Lifetime-limiting strength degradation from contact fatigue in dental ceramics. J Dent Res 2000 79 : 722 731
6. Mehl A, Blanz V : Biogeneric tooth reconstruction - a new fundamental method to describe and reconstruct the occlusal morphology of molars. In Mörmann WH (ed State of the Art of CAD/CAM Restorations, 20 Years of Cerec. Berlin, Quintessence, 2006, pp. 113 121
7. Culp L : Computerized occlusion in the laboratory. In Mörmann WH (ed State of the Art of CAD/CAM Restorations, 20 Years of Cerec. Berlin, Quintessence, 2006, pp. 203 210
8. Ender A, Mörmann WH : Cerec 3D Design: All-Ceramic CAD/CAM Inlays, Partial Crowns, Full Crowns and Veneers, Construction and Fabrication by Computer. Zurich, Foundation for the Advancement of Computerized Dentistry, 2005, pp. 207 215 (in German)
9. Mörmann WH, Bindl A, Lüthy H, et al : Effects of preparation and luting system on all-ceramic computer-generated crowns. Int J Prosthodont 1998 11 : 333 339
10. Bindl A, Lüthy H, Mörmann WH : Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns. Dent Mater 2006 22 : 29 36
11. Attia A, Abdelaziz KM, Freitag S, et al : Fracture load of composite resin and feldspathic all-ceramic CAD/CAM crowns. J Prosthet Dent 2006 95 : 117 123
12. Addison O, Marquis PM, Fleming GJP : Resin elasticity and the strengthening of all-ceramic restorations. J Dent Res 2007 86 : 519 523
13. Lee JJ, Wang Y, Lloyd IK, et al : Joining veneers to ceramic cores and dentition with adhesive layers. J Dent Res 2007 86 : 745 748
14. Blatz MB : Long-term clinical success of all-ceramic posterior restorations. Quintessence Int 2002 33 : 415 426
15. Bindl A, Richter B, Mörmann WH : Survival of ceramic computer-aided design/manufacturing crowns bonded to preparations with reduced macroretention geometry. Int J Prosthodont 2005 18 : 219 224
16. Hickel R, Manhart J : Longevity of restorations in posterior molars and reasons for failure. J Adhes Dent 2001 3 : 45 64
17. Arnetzl G : Different ceramic technologies in a clinical long-tem comparison. In Mörmann WH (ed State of the Art of CAD/CAM Restorations, 20 Years of Cerec. Berlin, Quintessence, 2006, pp. 65 72
18. Reiss B : Eighteen year clinical study in a dental practice. In Mörmann WH (ed State of the Art of CAD/CAM Restorations, 20 Years of Cerec. Berlin, Quintessence, 2006, pp. 57 64
19. Toman M, Toksavul S, Artunç C, et al : Influence of luting agent on the microleakage of all-ceramic crowns. J Adhes Dent 2007 9 : 39 47
20. Piwowarczyk A, Bender R, Ottl P, et al : Long-term bond between dual-polymerizing cementing agents and human hard dental tissue. Dent Mater 2007 23 : 211 217
21. Peumans M, Kanumilli P, De Munck J, et al : Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Mater 2005 21 : 864 881
22. Groten M, Pröbster L : The influence of different cementation modes on the fracture resistance of feldspathic ceramic crowns. Int J Prosthodont 1997 10 : 169 177
23. Behr M, Rosentritt M, Regnet T, et al : Marginal adaptation in dentin of a self-adhesive universal resin cement compared with well-tried systems. Dent Mater 2004 20 : 191 197
24. Komine F, Tomic M, Gerds T, et al : Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns. J Prosthet Dent 2004 92 359 364
25. Burke FJT, Fleming GJP, Abbas G, et al : Effectiveness of a self-adhesive resin luting system on fracture resistance of molars restored with dentin-bonded crowns. Eur J Prosthodont Rest Dent 2006 14 : 185 188
26. Driessens FCM, Verbeeck RMH : Biominerals. Boca Raton, FL, CRC Press, 1990, p. 164.
27. Craig RG, Powers JM, Wataha JC : Dental Materials, Properties and Manipulation (ed 8). St. Louis, MO, Mosby, 2004, pp. 23, 26
28. Piwowarczyk A, Ottl P, Lauer HC : Laboratory strength of glass ionomer and zinc phosphate cements. J Prosthodont 2001 10 : 140 147
29. Tam LE, Pulver E, McComb D, et al : Physical properties of calcium hydroxide and glass ionomer base and lining materials. Dent Mater 1989 5 : 145 149
30. Seto B, Cragun J, White SN : Elastic moduli of adhesive luting cements (Abstract no. 2626). J Dent Res 2007 86 (Special Issue A)
31. Datzmann G : Cerec Vitablocs Mark II machinable ceramic. In Mörmann WH (ed CAD/CIM in Aesthetic Dentistry. Cerec 10-Year Anniversary Symposium. Chicago, Quintessence, 1996, pp. 205 215
32. Windisch S, Hollis RA, Mörmann WH, et al : Physical properties of Cerec CAD/CIM crown materials (Abstract no. 907). J Dent Res 1999 78 : 219
33. Toparli M, Gokay N, Aksoy T : An investigation of temperature and stress distribution on a restored maxillary second premolar tooth using a three-dimensional finite element method. J Oral Rehabil 2000 27 : 1077 1081
34. Rekow ED, Harsono M, Janal M, et al : Factorial analysis of variables influencing stress in all-ceramic crowns. Dent Mater 2006 22 : 125 132
35. Stricker EJ, Göhring TN : Influence of different posts and cores on marginal adaptation, fracture resistance, and fracture mode of composite resin crowns on human mandibular premolars. An in vitro study. J Dent 2006 34 : 326 335
36. Krejci I, Kuster M, Lutz F : Influence of dentinal fluid and stress on marginal adaptation of resin composites. J Dent Res 1993 72 : 490 494
37. Mörmann WH, Bindl A : The bonding area of intra- and extra-coronal tooth preparation. Am J Dent 2006 19 : 201 205
38. De Nisco S, Mörmann WH : Occlusal morphology of Cerec 2 inlays and overlays. In Mörmann WH (ed CAD/CAM in Aesthetic Dentistry: Cerec 10-Year Anniversary Symposium. Chicago, Quintessence, 1996, pp. 369 389
39. Krejci I, Reich T, Lutz F, et al : In-vitro-test procedure for the evaluation of dental restoration systems. Schweiz Monatsschr Zahnmed 1990 100 : 953 960 (in German)
40. Altman DG : Practical Statistics for Medical Research (ed 2). London, Chapman & Hall, 1999, p. 259
41. Abo-Hamar SE, Hiller KA, Jung H, et al : Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel. Clin Oral Invest 2005 9 : 161 167
42. Goracci G, Bazzucchi M, Mori G, et al : In vivo and in vitro analysis of a bonding agent. Quintessence Int 1994 25 : 627 635
43. Sauro S, Pashley DH, Montanari M, et al : Effect of simulated pulpal pressure on dentin permeability and adhesion of self-etch adhesives. Dent Mater 2007 23 : 705 713
44. De Munck J, Vargas M, Van Landuyt K, et al : Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater 2004 20 : 963 971
45. Piwowarczyk A, Lauer HC, Sorensen JA : Microleakage of various cementing agents for full cast crowns. Dent Mater 2005 21 : 445 453
46. Chen JH, Matsumura H, Atsuta M : Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain. J Dent 1998 26 : 53 58 (Pubitemid 128394265)
47. Bona AD, Anusavice KJ, Mecholsky JJ Jr. : Failure analysis of resin composite bonded to ceramic. Dent Mater 2003 19 : 693 699
48. Kelly JR : Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 1999 81 : 652 661