메뉴 건너뛰기




Volumn 26, Issue 2, 2010, Pages

Direct comparison of the bond strength results of the different test methods: A critical literature review

Author keywords

Adhesion testing; Adhesion to dentin; Microshear; Microtensile; Review; Shear; Tensile

Indexed keywords

ADHESION TESTING; ADHESIVE BOND; ADHESIVE RESINS; BOND STRENGTH; BOND TEST; COEFFICIENT OF VARIATION; COEFFICIENTS OF VARIATIONS; COHESIVE FAILURES; DENTIN BOND STRENGTH; FINITE ELEMENT ANALYSIS; INTERFACIAL FRACTURE MECHANICS; LITERATURE REVIEWS; LITERATURE SEARCH; MATERIAL PROPERTY; MICROBOND TEST; MICROSHEAR; MICROTENSILE; MODES OF FAILURE; MULTI-PURPOSE; NONUNIFORM STRESS DISTRIBUTION; ONE STEP; RESIN COMPOSITES; SINGLE BOND; STEP SYSTEM; TEST METHOD;

EID: 75349099429     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.12.002     Document Type: Review
Times cited : (378)

References (193)
  • 1
  • 2
    • 0026232923 scopus 로고
    • Standardizing laboratory adhesion tests
    • Retief D.H. Standardizing laboratory adhesion tests. Am J Dent 4 (1991) 231-236
    • (1991) Am J Dent , vol.4 , pp. 231-236
    • Retief, D.H.1
  • 3
    • 0027682864 scopus 로고
    • An urgent plea for a standardized bonding (adhesion) test
    • Stanley H.R. An urgent plea for a standardized bonding (adhesion) test. J Dent Res 72 (1993) 1362-1363
    • (1993) J Dent Res , vol.72 , pp. 1362-1363
    • Stanley, H.R.1
  • 5
    • 0026060176 scopus 로고
    • Substrate for adhesion testing to tooth structure-review of the literature
    • Rueggeberg F.A. Substrate for adhesion testing to tooth structure-review of the literature. Dent Mater 7 (1991) 2-10
    • (1991) Dent Mater , vol.7 , pp. 2-10
    • Rueggeberg, F.A.1
  • 7
    • 0026160635 scopus 로고
    • The effect of local interfacial geometry on the measurement of the tensile bond strength to dentin
    • Van Noort R., Cardew G.E., Howard I.C., and Noroozi S. The effect of local interfacial geometry on the measurement of the tensile bond strength to dentin. J Dent Res 70 (1991) 889-893
    • (1991) J Dent Res , vol.70 , pp. 889-893
    • Van Noort, R.1    Cardew, G.E.2    Howard, I.C.3    Noroozi, S.4
  • 8
    • 0028476472 scopus 로고
    • Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test
    • Sano H., Shono T., Sonoda H., Takatsu T., Ciucchi B., Carvalho R., and Pashley D.H. Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test. Dent Mater 10 (1994) 236-240
    • (1994) Dent Mater , vol.10 , pp. 236-240
    • Sano, H.1    Shono, T.2    Sonoda, H.3    Takatsu, T.4    Ciucchi, B.5    Carvalho, R.6    Pashley, D.H.7
  • 10
    • 0029258829 scopus 로고
    • Three-dimensional finite element analysis of the shear bond test
    • DeHoff P.H., Anusavice K.J., and Wang Z. Three-dimensional finite element analysis of the shear bond test. Dent Mater 11 (1995) 126-131
    • (1995) Dent Mater , vol.11 , pp. 126-131
    • DeHoff, P.H.1    Anusavice, K.J.2    Wang, Z.3
  • 12
    • 0031158361 scopus 로고    scopus 로고
    • Why do shear bond tests pull out dentin?
    • Versluis A., Tantbirojn D., and Douglas W.H. Why do shear bond tests pull out dentin?. J Dent Res 76 (1997) 1298-1307
    • (1997) J Dent Res , vol.76 , pp. 1298-1307
    • Versluis, A.1    Tantbirojn, D.2    Douglas, W.H.3
  • 13
    • 38949217996 scopus 로고    scopus 로고
    • Evaluation of sources of uncertainties in microtensile bond strength of dental adhesive system for different specimen geometries
    • Ghassemieh E. Evaluation of sources of uncertainties in microtensile bond strength of dental adhesive system for different specimen geometries. Dent Mater 24 (2008) 536-547
    • (2008) Dent Mater , vol.24 , pp. 536-547
    • Ghassemieh, E.1
  • 14
    • 2342449112 scopus 로고    scopus 로고
    • Microtensile and tensile bond strength of single-bottle adhesives: a new test method
    • Abdalla A.I. Microtensile and tensile bond strength of single-bottle adhesives: a new test method. J Oral Rehabil 31 (2004) 379-384
    • (2004) J Oral Rehabil , vol.31 , pp. 379-384
    • Abdalla, A.I.1
  • 15
    • 0032198224 scopus 로고    scopus 로고
    • Evaluation of micro-tensile, shear and tensile tests determining the bond strength of three adhesive systems
    • Cardoso P.E., Braga R.R., and Carrilho M.R. Evaluation of micro-tensile, shear and tensile tests determining the bond strength of three adhesive systems. Dent Mater 14 (1998) 394-398
    • (1998) Dent Mater , vol.14 , pp. 394-398
    • Cardoso, P.E.1    Braga, R.R.2    Carrilho, M.R.3
  • 17
    • 0032009913 scopus 로고    scopus 로고
    • Effect of cross-sectional surface area on bond strengths between resin and dentin
    • Phrukkanon S., Burrow M.F., and Tyas M.J. Effect of cross-sectional surface area on bond strengths between resin and dentin. Dent Mater 14 (1998) 120-128
    • (1998) Dent Mater , vol.14 , pp. 120-128
    • Phrukkanon, S.1    Burrow, M.F.2    Tyas, M.J.3
  • 18
    • 1942468621 scopus 로고    scopus 로고
    • Analysis of tensile bond strengths using Weibull statistics
    • Burrow M.F., Thomas D., Swain M.V., and Tyas M.J. Analysis of tensile bond strengths using Weibull statistics. Biomaterials 25 (2004) 5031-5035
    • (2004) Biomaterials , vol.25 , pp. 5031-5035
    • Burrow, M.F.1    Thomas, D.2    Swain, M.V.3    Tyas, M.J.4
  • 19
    • 0034783857 scopus 로고    scopus 로고
    • Meta-analytical review of factors involved in dentin adherence
    • Leloup G., D'Hoore W., Bouter D., Degrange M., and Vreven J. Meta-analytical review of factors involved in dentin adherence. J Dent Res 80 (2001) 1605-1614
    • (2001) J Dent Res , vol.80 , pp. 1605-1614
    • Leloup, G.1    D'Hoore, W.2    Bouter, D.3    Degrange, M.4    Vreven, J.5
  • 20
    • 0028185780 scopus 로고
    • Clinical relevance of laboratory studies on dental materials: strength determination-a personal view
    • van Noort R. Clinical relevance of laboratory studies on dental materials: strength determination-a personal view. J Dent 22 Suppl. 1 (1994) S4-S8
    • (1994) J Dent , vol.22 , Issue.SUPPL. 1
    • van Noort, R.1
  • 22
    • 33144458833 scopus 로고    scopus 로고
    • Influence of eugenol-containing temporary cement on bonding of self-etching adhesives to dentin
    • Peutzfeldt A., and Asmussen E. Influence of eugenol-containing temporary cement on bonding of self-etching adhesives to dentin. J Adhes Dent 8 (2006) 31-34
    • (2006) J Adhes Dent , vol.8 , pp. 31-34
    • Peutzfeldt, A.1    Asmussen, E.2
  • 23
    • 0035653675 scopus 로고    scopus 로고
    • Shear bond strength of an autopolymerizing core buildup composite bonded to dentin with 9 dentin adhesive systems
    • Hagge M.S., and Lindemuth J.S. Shear bond strength of an autopolymerizing core buildup composite bonded to dentin with 9 dentin adhesive systems. J Prosthet Dent 86 (2001) 620-623
    • (2001) J Prosthet Dent , vol.86 , pp. 620-623
    • Hagge, M.S.1    Lindemuth, J.S.2
  • 24
    • 16344377053 scopus 로고    scopus 로고
    • Bond strengths of nine current dentine adhesive systems to primary and permanent teeth
    • Courson F., Bouter D., Ruse N.D., and Degrange M. Bond strengths of nine current dentine adhesive systems to primary and permanent teeth. J Oral Rehabil 32 (2005) 296-303
    • (2005) J Oral Rehabil , vol.32 , pp. 296-303
    • Courson, F.1    Bouter, D.2    Ruse, N.D.3    Degrange, M.4
  • 26
  • 28
    • 65449148747 scopus 로고    scopus 로고
    • Comparison of bonding performance of self-etching and etch-and-rinse adhesives on human dentin using reliability analysis
    • Bradna P., Vrbova R., Dudek M., Roubickova A., and Housova D. Comparison of bonding performance of self-etching and etch-and-rinse adhesives on human dentin using reliability analysis. J Adhes Dent 10 (2008) 423-429
    • (2008) J Adhes Dent , vol.10 , pp. 423-429
    • Bradna, P.1    Vrbova, R.2    Dudek, M.3    Roubickova, A.4    Housova, D.5
  • 29
    • 0242690917 scopus 로고    scopus 로고
    • Effect of fluorosis on dentine shear bond strength of a self-etching bonding system
    • Ermis R.B., and Gokay N. Effect of fluorosis on dentine shear bond strength of a self-etching bonding system. J Oral Rehabil 30 (2003) 1090-1094
    • (2003) J Oral Rehabil , vol.30 , pp. 1090-1094
    • Ermis, R.B.1    Gokay, N.2
  • 30
    • 0035754119 scopus 로고    scopus 로고
    • Influence of a simulated oral environment on dentin bond strength of two adhesive systems
    • Besnault C., and Attal J.P. Influence of a simulated oral environment on dentin bond strength of two adhesive systems. Am J Dent 14 (2001) 367-372
    • (2001) Am J Dent , vol.14 , pp. 367-372
    • Besnault, C.1    Attal, J.P.2
  • 31
    • 16244376454 scopus 로고    scopus 로고
    • Bond strength of composite to dentin using self-etching adhesive systems
    • Naughton W.T., and Latta M.A. Bond strength of composite to dentin using self-etching adhesive systems. Quintessence Int 36 (2005) 259-262
    • (2005) Quintessence Int , vol.36 , pp. 259-262
    • Naughton, W.T.1    Latta, M.A.2
  • 32
    • 0141993615 scopus 로고    scopus 로고
    • Effect of application technique and dentin bonding agent interaction on shear bond strength
    • Bonilla E.D., Stevenson III R.G., Yashar M., and Caputo A.A. Effect of application technique and dentin bonding agent interaction on shear bond strength. Oper Dent 28 (2003) 568-573
    • (2003) Oper Dent , vol.28 , pp. 568-573
    • Bonilla, E.D.1    Stevenson III, R.G.2    Yashar, M.3    Caputo, A.A.4
  • 33
    • 0036675956 scopus 로고    scopus 로고
    • Bond strength of five current adhesives to caries-affected dentin
    • Sengun A., Unlu N., Ozer F., and OztUrk B. Bond strength of five current adhesives to caries-affected dentin. J Oral Rehabil 29 (2002) 777-781
    • (2002) J Oral Rehabil , vol.29 , pp. 777-781
    • Sengun, A.1    Unlu, N.2    Ozer, F.3    OztUrk, B.4
  • 34
    • 33745225871 scopus 로고    scopus 로고
    • Shear bond strengths of self-etching adhesives to caries-affected dentin on the gingival wall
    • Koyuturk A.E., Sengun A., Ozer F., Sener Y., and Gokalp A. Shear bond strengths of self-etching adhesives to caries-affected dentin on the gingival wall. Dent Mater J 25 (2006) 59-65
    • (2006) Dent Mater J , vol.25 , pp. 59-65
    • Koyuturk, A.E.1    Sengun, A.2    Ozer, F.3    Sener, Y.4    Gokalp, A.5
  • 35
    • 34249741702 scopus 로고    scopus 로고
    • Resin composites: strength of the bond to dentin versus mechanical properties
    • Thomsen K.B., and Peutzfeldt A. Resin composites: strength of the bond to dentin versus mechanical properties. Clin Oral Investig 11 (2007) 45-49
    • (2007) Clin Oral Investig , vol.11 , pp. 45-49
    • Thomsen, K.B.1    Peutzfeldt, A.2
  • 37
    • 45849117632 scopus 로고    scopus 로고
    • Bonding of one-step and two-step self-etching primer adhesives to dentin with different tubule orientations
    • Adebayo O.A., Francis Burrow M., and John Tyas M. Bonding of one-step and two-step self-etching primer adhesives to dentin with different tubule orientations. Acta Odontol Scand 66 (2008) 159-168
    • (2008) Acta Odontol Scand , vol.66 , pp. 159-168
    • Adebayo, O.A.1    Francis Burrow, M.2    John Tyas, M.3
  • 38
    • 34249079093 scopus 로고    scopus 로고
    • Effect of ZOE temporary restoration on resin-dentin bond strength using different adhesive strategies
    • [discussion 153]
    • Carvalho C.N., de Oliveira Bauer J.R., Loguercio A.D., and Reis A. Effect of ZOE temporary restoration on resin-dentin bond strength using different adhesive strategies. J Esthet Restor Dent 19 (2007) 144-152 [discussion 153]
    • (2007) J Esthet Restor Dent , vol.19 , pp. 144-152
    • Carvalho, C.N.1    de Oliveira Bauer, J.R.2    Loguercio, A.D.3    Reis, A.4
  • 39
    • 34547414873 scopus 로고    scopus 로고
    • Bond strengths of two adhesive systems to dentin contaminated with a hemostatic agent
    • Kuphasuk W., Harnirattisai C., Senawongse P., and Tagami J. Bond strengths of two adhesive systems to dentin contaminated with a hemostatic agent. Oper Dent 32 (2007) 399-405
    • (2007) Oper Dent , vol.32 , pp. 399-405
    • Kuphasuk, W.1    Harnirattisai, C.2    Senawongse, P.3    Tagami, J.4
  • 40
    • 1942471891 scopus 로고    scopus 로고
    • Effective bond strength of current adhesive systems on deciduous and permanent dentin
    • Senawongse P., Harnirattisai C., Shimada Y., and Tagami J. Effective bond strength of current adhesive systems on deciduous and permanent dentin. Oper Dent 29 (2004) 196-202
    • (2004) Oper Dent , vol.29 , pp. 196-202
    • Senawongse, P.1    Harnirattisai, C.2    Shimada, Y.3    Tagami, J.4
  • 41
    • 1542703825 scopus 로고    scopus 로고
    • Micro-shear bond strengths of adhesive resins to coronal dentin versus the floor of the pulp chamber
    • Toba S., Veerapravati W., Shimada Y., Nikaido T., and Tagami J. Micro-shear bond strengths of adhesive resins to coronal dentin versus the floor of the pulp chamber. Am J Dent 16 Spec. No. (2003) 51A-56A
    • (2003) Am J Dent , vol.16 , Issue.Spec
    • Toba, S.1    Veerapravati, W.2    Shimada, Y.3    Nikaido, T.4    Tagami, J.5
  • 42
    • 34447633340 scopus 로고    scopus 로고
    • Effects of solvent drying time on micro-shear bond strength and mechanical properties of two self-etching adhesive systems
    • Sadr A., Shimada Y., and Tagami J. Effects of solvent drying time on micro-shear bond strength and mechanical properties of two self-etching adhesive systems. Dent Mater 23 (2007) 1114-1119
    • (2007) Dent Mater , vol.23 , pp. 1114-1119
    • Sadr, A.1    Shimada, Y.2    Tagami, J.3
  • 44
    • 65449153303 scopus 로고    scopus 로고
    • Effect of caries-affected dentin hardness on the shear bond strength of current adhesives
    • Wei S., Sadr A., Shimada Y., and Tagami J. Effect of caries-affected dentin hardness on the shear bond strength of current adhesives. J Adhes Dent 10 (2008) 431-440
    • (2008) J Adhes Dent , vol.10 , pp. 431-440
    • Wei, S.1    Sadr, A.2    Shimada, Y.3    Tagami, J.4
  • 46
    • 34547356439 scopus 로고    scopus 로고
    • Micro-tensile and micro-shear bond strengths of current self-etch adhesives to enamel and dentin
    • Ishikawa A., Shimada Y., Foxton R.M., and Tagami J. Micro-tensile and micro-shear bond strengths of current self-etch adhesives to enamel and dentin. Am J Dent 20 (2007) 161-166
    • (2007) Am J Dent , vol.20 , pp. 161-166
    • Ishikawa, A.1    Shimada, Y.2    Foxton, R.M.3    Tagami, J.4
  • 47
    • 0042994081 scopus 로고    scopus 로고
    • Effect of artificial saliva contamination on pH value change and dentin bond strength
    • Hiraishi N., Kitasako Y., Nikaido T., Nomura S., Burrow M.F., and Tagami J. Effect of artificial saliva contamination on pH value change and dentin bond strength. Dent Mater 19 (2003) 429-434
    • (2003) Dent Mater , vol.19 , pp. 429-434
    • Hiraishi, N.1    Kitasako, Y.2    Nikaido, T.3    Nomura, S.4    Burrow, M.F.5    Tagami, J.6
  • 48
    • 2942521492 scopus 로고    scopus 로고
    • The bond of resin to different dentin surface characteristics
    • Sattabanasuk V., Shimada Y., and Tagami J. The bond of resin to different dentin surface characteristics. Oper Dent 29 (2004) 333-341
    • (2004) Oper Dent , vol.29 , pp. 333-341
    • Sattabanasuk, V.1    Shimada, Y.2    Tagami, J.3
  • 49
    • 34047262527 scopus 로고    scopus 로고
    • Effect of a desensitizing agent containing glutaraldehyde and HEMA on bond strength to Er:YAG laser-irradiated dentine
    • Omae M., Inoue M., Itota T., Finger W.J., Tanaka K., Yamamoto K., and Yoshiyama M. Effect of a desensitizing agent containing glutaraldehyde and HEMA on bond strength to Er:YAG laser-irradiated dentine. J Dent 35 (2007) 398-402
    • (2007) J Dent , vol.35 , pp. 398-402
    • Omae, M.1    Inoue, M.2    Itota, T.3    Finger, W.J.4    Tanaka, K.5    Yamamoto, K.6    Yoshiyama, M.7
  • 50
    • 48249138150 scopus 로고    scopus 로고
    • Influence of intrapulpal pressure simulation on the bond strength of adhesive systems to dentin
    • Cardoso M.V., Moretto S.G., de Carvalho R.C., and Russo E.M. Influence of intrapulpal pressure simulation on the bond strength of adhesive systems to dentin. Braz Oral Res 22 (2008) 170-175
    • (2008) Braz Oral Res , vol.22 , pp. 170-175
    • Cardoso, M.V.1    Moretto, S.G.2    de Carvalho, R.C.3    Russo, E.M.4
  • 51
    • 13944273789 scopus 로고    scopus 로고
    • Bonding of self-etching and total-etch systems to Er:YAG laser-irradiated dentin. Tensile bond strength and scanning electron microscopy
    • Ramos R.P., Chinelatti M.A., Chimello D.T., Borsatto M.C., Pecora J.D., and Palma-Dibb R.G. Bonding of self-etching and total-etch systems to Er:YAG laser-irradiated dentin. Tensile bond strength and scanning electron microscopy. Braz Dent J 15 Spec. No. (2004) SI9-S20
    • (2004) Braz Dent J , vol.15 , Issue.Spec
    • Ramos, R.P.1    Chinelatti, M.A.2    Chimello, D.T.3    Borsatto, M.C.4    Pecora, J.D.5    Palma-Dibb, R.G.6
  • 52
    • 34648817329 scopus 로고    scopus 로고
    • Dentin bonding of light- and self-curing resin composites using simplified total- and self-etch adhesives
    • Moll K., Schuster B., and Haller B. Dentin bonding of light- and self-curing resin composites using simplified total- and self-etch adhesives. Quintessence Int 38 (2007) e27-e35
    • (2007) Quintessence Int , vol.38
    • Moll, K.1    Schuster, B.2    Haller, B.3
  • 53
    • 53249123420 scopus 로고    scopus 로고
    • Effect of double-application or the application of a hydrophobic layer for improved efficacy of one-step self-etch systems in enamel and dentin
    • Albuquerque M., Pegoraro M., Mattei G., Reis A., and Loguercio A.D. Effect of double-application or the application of a hydrophobic layer for improved efficacy of one-step self-etch systems in enamel and dentin. Oper Dent 33 (2008) 564-570
    • (2008) Oper Dent , vol.33 , pp. 564-570
    • Albuquerque, M.1    Pegoraro, M.2    Mattei, G.3    Reis, A.4    Loguercio, A.D.5
  • 55
    • 35548930327 scopus 로고    scopus 로고
    • Adhesive performance of dentin bonding agents applied in vivo and in vitro. Effect of intrapulpal pressure and dentin depth
    • Hebling J., Castro F.L., and Costa C.A. Adhesive performance of dentin bonding agents applied in vivo and in vitro. Effect of intrapulpal pressure and dentin depth. J Biomed Mater Res B Appl Biomater 83 (2007) 295-303
    • (2007) J Biomed Mater Res B Appl Biomater , vol.83 , pp. 295-303
    • Hebling, J.1    Castro, F.L.2    Costa, C.A.3
  • 56
    • 33846673624 scopus 로고    scopus 로고
    • Microtensile bond strength of resin composite bonded to caries-affected dentin with three adhesives
    • Omar H., El-Badrawy W., El-Mowafy O., Atta O., and Saleem B. Microtensile bond strength of resin composite bonded to caries-affected dentin with three adhesives. Oper Dent 32 (2007) 24-30
    • (2007) Oper Dent , vol.32 , pp. 24-30
    • Omar, H.1    El-Badrawy, W.2    El-Mowafy, O.3    Atta, O.4    Saleem, B.5
  • 57
    • 33749526150 scopus 로고    scopus 로고
    • Influence of additional adhesive application on the microtensile bond strength of adhesive systems
    • de Silva A.L., Lima D.A., de Souza G.M., dos Santos C.T., and Paulillo L.A. Influence of additional adhesive application on the microtensile bond strength of adhesive systems. Oper Dent 31 (2006) 562-568
    • (2006) Oper Dent , vol.31 , pp. 562-568
    • de Silva, A.L.1    Lima, D.A.2    de Souza, G.M.3    dos Santos, C.T.4    Paulillo, L.A.5
  • 60
    • 33747043061 scopus 로고    scopus 로고
    • Influence of light-activated and auto- and dual-polymerizing adhesive systems on bond strength of indirect composite resin to dentin
    • de Menezes M.J., Arrais C.A., and Giannini M. Influence of light-activated and auto- and dual-polymerizing adhesive systems on bond strength of indirect composite resin to dentin. J Prosthet Dent 96 (2006) 115-121
    • (2006) J Prosthet Dent , vol.96 , pp. 115-121
    • de Menezes, M.J.1    Arrais, C.A.2    Giannini, M.3
  • 62
    • 33744821685 scopus 로고    scopus 로고
    • Effect of dentinal surface preparation on bond strength of self-etching adhesive systems
    • Rocha P.I., Borges A.B., Rodrigues J.R., Arrais C.A., and Giannini M. Effect of dentinal surface preparation on bond strength of self-etching adhesive systems. Braz Oral Res 20 (2006) 52-58
    • (2006) Braz Oral Res , vol.20 , pp. 52-58
    • Rocha, P.I.1    Borges, A.B.2    Rodrigues, J.R.3    Arrais, C.A.4    Giannini, M.5
  • 63
    • 0348147427 scopus 로고    scopus 로고
    • Microtensile bond strengths to caries-affected dentine treated with Carisolv
    • Burrow M.F., Bokas J., Tanumiharja M., and Tyas M.J. Microtensile bond strengths to caries-affected dentine treated with Carisolv. Aust Dent J 48 (2003) 110-114
    • (2003) Aust Dent J , vol.48 , pp. 110-114
    • Burrow, M.F.1    Bokas, J.2    Tanumiharja, M.3    Tyas, M.J.4
  • 64
    • 34248665291 scopus 로고    scopus 로고
    • Influence of air abrasion and long-term storage on the bond strength of self-etching adhesives to dentin
    • Franca F.M., dos Santos A.J., and Lovadino J.R. Influence of air abrasion and long-term storage on the bond strength of self-etching adhesives to dentin. Oper Dent 32 (2007) 217-224
    • (2007) Oper Dent , vol.32 , pp. 217-224
    • Franca, F.M.1    dos Santos, A.J.2    Lovadino, J.R.3
  • 65
    • 12344324673 scopus 로고    scopus 로고
    • Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system
    • Jacques P., and Hebling J. Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system. Dent Mater 21 (2005) 103-109
    • (2005) Dent Mater , vol.21 , pp. 103-109
    • Jacques, P.1    Hebling, J.2
  • 66
    • 61449522624 scopus 로고    scopus 로고
    • Microtensile bond strength of adhesive systems to dentin with or without application of an intermediate flowable resin layer
    • De Goes M.F., Giannini M., Di Hipolito V., Carrilho M.R., Daronch M., and Rueggeberg F.A. Microtensile bond strength of adhesive systems to dentin with or without application of an intermediate flowable resin layer. Braz Dent J 19 (2008) 51-56
    • (2008) Braz Dent J , vol.19 , pp. 51-56
    • De Goes, M.F.1    Giannini, M.2    Di Hipolito, V.3    Carrilho, M.R.4    Daronch, M.5    Rueggeberg, F.A.6
  • 67
    • 1942535973 scopus 로고    scopus 로고
    • Bond strength of a self-etching adhesive system to caries-affected dentin
    • Yazici A.R., Akca T., Ozgunaltay G., and Dayangac B. Bond strength of a self-etching adhesive system to caries-affected dentin. Oper Dent 29 (2004) 176-181
    • (2004) Oper Dent , vol.29 , pp. 176-181
    • Yazici, A.R.1    Akca, T.2    Ozgunaltay, G.3    Dayangac, B.4
  • 69
    • 26444508314 scopus 로고    scopus 로고
    • Ultrastructural correlates of in vivo/in vitro bond degradation in self-etch adhesives
    • Donmez N., Belli S., Pashley D.H., and Tay F.R. Ultrastructural correlates of in vivo/in vitro bond degradation in self-etch adhesives. J Dent Res 84 (2005) 355-359
    • (2005) J Dent Res , vol.84 , pp. 355-359
    • Donmez, N.1    Belli, S.2    Pashley, D.H.3    Tay, F.R.4
  • 71
    • 0035453223 scopus 로고    scopus 로고
    • Adhesion of resin composite core materials to dentin
    • O'Keefe K.L., and Powers J.M. Adhesion of resin composite core materials to dentin. Int J Prosthodont 14 (2001) 451-456
    • (2001) Int J Prosthodont , vol.14 , pp. 451-456
    • O'Keefe, K.L.1    Powers, J.M.2
  • 72
    • 0141923914 scopus 로고    scopus 로고
    • Relationship between nanoleakage and microtensile bond strength at the resin-dentin interface
    • Guzman-Armstrong S., Armstrong S.R., and Qian F. Relationship between nanoleakage and microtensile bond strength at the resin-dentin interface. Oper Dent 28 (2003) 60-66
    • (2003) Oper Dent , vol.28 , pp. 60-66
    • Guzman-Armstrong, S.1    Armstrong, S.R.2    Qian, F.3
  • 73
    • 52049103830 scopus 로고    scopus 로고
    • Effect of hydrostatic pulpal water pressure on microtensile bond strength of self-etch adhesives to dentin
    • Abdalla A.I., Elsayed H.Y., and Garcia-Godoy F. Effect of hydrostatic pulpal water pressure on microtensile bond strength of self-etch adhesives to dentin. Am J Dent 21 (2008) 233-238
    • (2008) Am J Dent , vol.21 , pp. 233-238
    • Abdalla, A.I.1    Elsayed, H.Y.2    Garcia-Godoy, F.3
  • 77
    • 39149142521 scopus 로고    scopus 로고
    • Bond strength and ultimate tensile strength of resin composite filled into dentine cavity; effect of bulk and incremental filling technique
    • Nayif M.M., Nakajima M., Foxton R.M., and Tagami J. Bond strength and ultimate tensile strength of resin composite filled into dentine cavity; effect of bulk and incremental filling technique. J Dent 36 (2008) 228-234
    • (2008) J Dent , vol.36 , pp. 228-234
    • Nayif, M.M.1    Nakajima, M.2    Foxton, R.M.3    Tagami, J.4
  • 81
    • 67650155391 scopus 로고    scopus 로고
    • Influence of Nd:YAG laser irradiation on microtensile bond strength of adhesive systems to sound or carious dentin
    • Paranhos M.P., Spohr A.M., Marcondes M., Oshima H.M., Mota E.G., and Burnett Jr. L.H. Influence of Nd:YAG laser irradiation on microtensile bond strength of adhesive systems to sound or carious dentin. Quintessence Int 40 (2009) 145-153
    • (2009) Quintessence Int , vol.40 , pp. 145-153
    • Paranhos, M.P.1    Spohr, A.M.2    Marcondes, M.3    Oshima, H.M.4    Mota, E.G.5    Burnett Jr., L.H.6
  • 82
    • 20944451075 scopus 로고    scopus 로고
    • Effect of smear layer thickness and pH of self-etching adhesive systems on the bond strength and gap formation to dentin
    • Kenshima S., Reis A., Uceda-Gomez N., Tancredo Lde L., Filho L.E., Nogueira F.N., and Loguercio A.D. Effect of smear layer thickness and pH of self-etching adhesive systems on the bond strength and gap formation to dentin. J Adhes Dent 7 (2005) 117-126
    • (2005) J Adhes Dent , vol.7 , pp. 117-126
    • Kenshima, S.1    Reis, A.2    Uceda-Gomez, N.3    Tancredo Lde, L.4    Filho, L.E.5    Nogueira, F.N.6    Loguercio, A.D.7
  • 84
    • 46649086090 scopus 로고    scopus 로고
    • Four-year water degradation of a total-etch and two self-etching adhesives bonded to dentin
    • Abdalla A.I., and Feilzer A.J. Four-year water degradation of a total-etch and two self-etching adhesives bonded to dentin. J Dent 36 (2008) 611-617
    • (2008) J Dent , vol.36 , pp. 611-617
    • Abdalla, A.I.1    Feilzer, A.J.2
  • 85
    • 28744441724 scopus 로고    scopus 로고
    • Effect of simulated pulpal pressure on dentin bond strength of self-etching bonding systems
    • Moll K., Park H.J., and Haller B. Effect of simulated pulpal pressure on dentin bond strength of self-etching bonding systems. Am J Dent 18 (2005) 335-339
    • (2005) Am J Dent , vol.18 , pp. 335-339
    • Moll, K.1    Park, H.J.2    Haller, B.3
  • 86
    • 7244219852 scopus 로고    scopus 로고
    • Micro-tensile bond strength of self-etching primer adhesive systems to human coronal carious dentin
    • Doi J., Itota T., Torii Y., Nakabo S., and Yoshiyama M. Micro-tensile bond strength of self-etching primer adhesive systems to human coronal carious dentin. J Oral Rehabil 31 (2004) 1023-1028
    • (2004) J Oral Rehabil , vol.31 , pp. 1023-1028
    • Doi, J.1    Itota, T.2    Torii, Y.3    Nakabo, S.4    Yoshiyama, M.5
  • 89
    • 75349088582 scopus 로고    scopus 로고
    • Influence of diamond sono-abrasion, air-abrasion and Er:YAG laser irradiation on bonding of different adhesive systems to dentin
    • de Oliveira M.T., de Freitas P.M., de Paula Eduardo C., Ambrosano G.M., and Giannini M. Influence of diamond sono-abrasion, air-abrasion and Er:YAG laser irradiation on bonding of different adhesive systems to dentin. Eur J Dent 1 (2007) 158-166
    • (2007) Eur J Dent , vol.1 , pp. 158-166
    • de Oliveira, M.T.1    de Freitas, P.M.2    de Paula Eduardo, C.3    Ambrosano, G.M.4    Giannini, M.5
  • 90
    • 7644219797 scopus 로고    scopus 로고
    • Effects of additional and extended acid etching on bonding to caries-affected dentine
    • Arrais C.A., Giannini M., Nakajima M., and Tagami J. Effects of additional and extended acid etching on bonding to caries-affected dentine. Eur J Oral Sci 112 (2004) 458-464
    • (2004) Eur J Oral Sci , vol.112 , pp. 458-464
    • Arrais, C.A.1    Giannini, M.2    Nakajima, M.3    Tagami, J.4
  • 92
    • 0344957842 scopus 로고    scopus 로고
    • Efficacy of a resin coating on bond strengths of resin cement to dentin
    • [discussion 113]
    • Jayasooriya P.R., Pereira P.N., Nikaido T., and Tagami J. Efficacy of a resin coating on bond strengths of resin cement to dentin. J Esthet Restor Dent 15 (2003) 105-113 [discussion 113]
    • (2003) J Esthet Restor Dent , vol.15 , pp. 105-113
    • Jayasooriya, P.R.1    Pereira, P.N.2    Nikaido, T.3    Tagami, J.4
  • 95
    • 20644449670 scopus 로고    scopus 로고
    • Effect of air-powder polishing on dentin adhesion of a self-etching primer bonding system
    • Nishimura K., Nikaido T., Foxton R.M., and Tagami J. Effect of air-powder polishing on dentin adhesion of a self-etching primer bonding system. Dent Mater J 24 (2005) 59-65
    • (2005) Dent Mater J , vol.24 , pp. 59-65
    • Nishimura, K.1    Nikaido, T.2    Foxton, R.M.3    Tagami, J.4
  • 96
    • 34247578611 scopus 로고    scopus 로고
    • Resin-dentin bond strength as related to different surface preparation methods
    • Sattabanasuk V., Vachiramon V., Qian F., and Armstrong S.R. Resin-dentin bond strength as related to different surface preparation methods. J Dent 35 (2007) 467-475
    • (2007) J Dent , vol.35 , pp. 467-475
    • Sattabanasuk, V.1    Vachiramon, V.2    Qian, F.3    Armstrong, S.R.4
  • 98
    • 35348987159 scopus 로고    scopus 로고
    • Microtensile bond strength of self-etching adhesive systems to differently prepared dentin
    • Pangsrisomboon B., Harnirattisai C., Nilsri K., and Burrow M.F. Microtensile bond strength of self-etching adhesive systems to differently prepared dentin. Am J Dent 20 (2007) 259-262
    • (2007) Am J Dent , vol.20 , pp. 259-262
    • Pangsrisomboon, B.1    Harnirattisai, C.2    Nilsri, K.3    Burrow, M.F.4
  • 100
    • 41549101062 scopus 로고    scopus 로고
    • Influence of dentin acid-etching and NaOCl-treatment on bond strengths of self-etch adhesives
    • Erhardt M.C., Osorio E., Aguilera F.S., Proenca J.P., Osorio R., and Toledano M. Influence of dentin acid-etching and NaOCl-treatment on bond strengths of self-etch adhesives. Am J Dent 21 (2008) 44-48
    • (2008) Am J Dent , vol.21 , pp. 44-48
    • Erhardt, M.C.1    Osorio, E.2    Aguilera, F.S.3    Proenca, J.P.4    Osorio, R.5    Toledano, M.6
  • 101
    • 14644410097 scopus 로고    scopus 로고
    • Effect of the hydration status of the smear layer on the wettability and bond strength of a self-etching primer to dentin
    • Toledano M., Osorio R., Moreira M.A., Cabrerizo-Vilchez M.A., Gea P., Tay F.R., and Pashley D.H. Effect of the hydration status of the smear layer on the wettability and bond strength of a self-etching primer to dentin. Am J Dent 17 (2004) 310-314
    • (2004) Am J Dent , vol.17 , pp. 310-314
    • Toledano, M.1    Osorio, R.2    Moreira, M.A.3    Cabrerizo-Vilchez, M.A.4    Gea, P.5    Tay, F.R.6    Pashley, D.H.7
  • 104
    • 33646438819 scopus 로고    scopus 로고
    • Bond strength of total-etch and self-etch dentin adhesive systems on peripheral and central dentinal tissue: a microtensile bond strength test
    • Yesilyurt C., and Bulucu B. Bond strength of total-etch and self-etch dentin adhesive systems on peripheral and central dentinal tissue: a microtensile bond strength test. J Contemp Dent Pract 7 (2006) 26-36
    • (2006) J Contemp Dent Pract , vol.7 , pp. 26-36
    • Yesilyurt, C.1    Bulucu, B.2
  • 106
    • 33645924040 scopus 로고    scopus 로고
    • Differential effect of in vitro degradation on resin-dentin bonds produced by self-etch versus total-etch adhesives
    • Toledano M., Osorio R., Albaladejo A., Aguilera F.S., and Osorio E. Differential effect of in vitro degradation on resin-dentin bonds produced by self-etch versus total-etch adhesives. J Biomed Mater Res A 77 (2006) 128-135
    • (2006) J Biomed Mater Res A , vol.77 , pp. 128-135
    • Toledano, M.1    Osorio, R.2    Albaladejo, A.3    Aguilera, F.S.4    Osorio, E.5
  • 107
    • 0141924427 scopus 로고    scopus 로고
    • Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment
    • Van Meerbeek B., De Munck J., Mattar D., Van Landuyt K., and Lambrechts P. Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Oper Dent 28 (2003) 647-660
    • (2003) Oper Dent , vol.28 , pp. 647-660
    • Van Meerbeek, B.1    De Munck, J.2    Mattar, D.3    Van Landuyt, K.4    Lambrechts, P.5
  • 108
    • 14644398596 scopus 로고    scopus 로고
    • Effect of load cycling and in vitro degradation on resin-dentin bonds using a self-etching primer
    • Osorio R., Toledano M., Osorio E., Aguilera F.S., and Tay F.R. Effect of load cycling and in vitro degradation on resin-dentin bonds using a self-etching primer. J Biomed Mater Res A 72 (2005) 399-408
    • (2005) J Biomed Mater Res A , vol.72 , pp. 399-408
    • Osorio, R.1    Toledano, M.2    Osorio, E.3    Aguilera, F.S.4    Tay, F.R.5
  • 109
    • 36048961167 scopus 로고    scopus 로고
    • Bonding of acid-etch and self-etch adhesives to human fluorosed dentine
    • Waidyasekera P.G., Nikaido T., Weerasinghe D.D., and Tagami J. Bonding of acid-etch and self-etch adhesives to human fluorosed dentine. J Dent 35 (2007) 915-922
    • (2007) J Dent , vol.35 , pp. 915-922
    • Waidyasekera, P.G.1    Nikaido, T.2    Weerasinghe, D.D.3    Tagami, J.4
  • 110
    • 33644770129 scopus 로고    scopus 로고
    • Effect of cyclic loading on the microtensile bond strengths of total-etch and self-etch adhesives
    • Toledano M., Osorio R., Albaladejo A., Aguilera F.S., Tay F.R., and Ferrari M. Effect of cyclic loading on the microtensile bond strengths of total-etch and self-etch adhesives. Oper Dent 31 (2006) 25-32
    • (2006) Oper Dent , vol.31 , pp. 25-32
    • Toledano, M.1    Osorio, R.2    Albaladejo, A.3    Aguilera, F.S.4    Tay, F.R.5    Ferrari, M.6
  • 111
    • 0036580064 scopus 로고    scopus 로고
    • Effects of mechanical properties of adhesive resins on bond strength to dentin
    • Takahashi A., Sato Y., Uno S., Pereira P.N., and Sano H. Effects of mechanical properties of adhesive resins on bond strength to dentin. Dent Mater 18 (2002) 263-268
    • (2002) Dent Mater , vol.18 , pp. 263-268
    • Takahashi, A.1    Sato, Y.2    Uno, S.3    Pereira, P.N.4    Sano, H.5
  • 113
    • 0035405652 scopus 로고    scopus 로고
    • Effects of different burs on dentin bond strengths of self-etching primer bonding systems
    • Ogata M., Harada N., Yamaguchi S., Nakajima M., Pereira P.N., and Tagami J. Effects of different burs on dentin bond strengths of self-etching primer bonding systems. Oper Dent 26 (2001) 375-382
    • (2001) Oper Dent , vol.26 , pp. 375-382
    • Ogata, M.1    Harada, N.2    Yamaguchi, S.3    Nakajima, M.4    Pereira, P.N.5    Tagami, J.6
  • 114
    • 33746816062 scopus 로고    scopus 로고
    • Bonding durability of a self-etching primer system to normal and caries-affected dentin under hydrostatic pulpal pressure in vitro
    • Nakajima M., Hosaka K., Yamauti M., Foxton R.M., and Tagami J. Bonding durability of a self-etching primer system to normal and caries-affected dentin under hydrostatic pulpal pressure in vitro. Am J Dent 19 (2006) 147-150
    • (2006) Am J Dent , vol.19 , pp. 147-150
    • Nakajima, M.1    Hosaka, K.2    Yamauti, M.3    Foxton, R.M.4    Tagami, J.5
  • 115
    • 46049111485 scopus 로고    scopus 로고
    • Effect of dentinal surface preparation on bond strength of self-etching adhesives
    • Yiu C.K., Hiraishi N., King N.M., and Tay F.R. Effect of dentinal surface preparation on bond strength of self-etching adhesives. J Adhes Dent 10 (2008) 173-182
    • (2008) J Adhes Dent , vol.10 , pp. 173-182
    • Yiu, C.K.1    Hiraishi, N.2    King, N.M.3    Tay, F.R.4
  • 116
    • 59849095543 scopus 로고    scopus 로고
    • Adhesion after erbium, chromium:yttrium-scandium-gallium-garnet laser application at three different irradiation conditions
    • Botta S.B., da Ana P.A., Zezell D.M., Powers J.M., and Matos A.B. Adhesion after erbium, chromium:yttrium-scandium-gallium-garnet laser application at three different irradiation conditions. Lasers Med Sci 24 (2009) 67-73
    • (2009) Lasers Med Sci , vol.24 , pp. 67-73
    • Botta, S.B.1    da Ana, P.A.2    Zezell, D.M.3    Powers, J.M.4    Matos, A.B.5
  • 119
    • 33845419026 scopus 로고    scopus 로고
    • Evaluation of antibacterial and fluoride-releasing adhesive system on dentin--microtensile bond strength and acid-base challenge
    • Shinohara M.S., Yamauti M., Inoue G., Nikaido T., Tagami J., Giannini M., and de Goes M.F. Evaluation of antibacterial and fluoride-releasing adhesive system on dentin--microtensile bond strength and acid-base challenge. Dent Mater J 25 (2006) 545-552
    • (2006) Dent Mater J , vol.25 , pp. 545-552
    • Shinohara, M.S.1    Yamauti, M.2    Inoue, G.3    Nikaido, T.4    Tagami, J.5    Giannini, M.6    de Goes, M.F.7
  • 120
    • 41549164829 scopus 로고    scopus 로고
    • Early and 24-hour bond strength and degree of conversion of etch-and-rinse and self-etch adhesives
    • Sadek F.T., Calheiros F.C., Cardoso P.E., Kawano Y., Tay F., and Ferrari M. Early and 24-hour bond strength and degree of conversion of etch-and-rinse and self-etch adhesives. Am J Dent 21 (2008) 30-34
    • (2008) Am J Dent , vol.21 , pp. 30-34
    • Sadek, F.T.1    Calheiros, F.C.2    Cardoso, P.E.3    Kawano, Y.4    Tay, F.5    Ferrari, M.6
  • 121
    • 0345447129 scopus 로고    scopus 로고
    • Incompatibility of self-etch adhesives with chemical/dual-cured composites: two-step vs one-step systems
    • Cheong C., King N.M., Pashley D.H., Ferrari M., Toledano M., and Tay F.R. Incompatibility of self-etch adhesives with chemical/dual-cured composites: two-step vs one-step systems. Oper Dent 28 (2003) 747-755
    • (2003) Oper Dent , vol.28 , pp. 747-755
    • Cheong, C.1    King, N.M.2    Pashley, D.H.3    Ferrari, M.4    Toledano, M.5    Tay, F.R.6
  • 122
    • 7044226331 scopus 로고    scopus 로고
    • Effect of bur type on microtensile bond strengths of self-etching systems to human dentin
    • Dias W.R., Pereira P.N., and Swift Jr. E.J. Effect of bur type on microtensile bond strengths of self-etching systems to human dentin. J Adhes Dent 6 (2004) 195-203
    • (2004) J Adhes Dent , vol.6 , pp. 195-203
    • Dias, W.R.1    Pereira, P.N.2    Swift Jr., E.J.3
  • 125
  • 126
    • 33845964519 scopus 로고    scopus 로고
    • In vitro bonding performance of all-in-one adhesives. Part I. Microtensile bond strengths
    • Perdigao J., Gomes G., Gondo R., and Fundingsland J.W. In vitro bonding performance of all-in-one adhesives. Part I. Microtensile bond strengths. J Adhes Dent 8 (2006) 367-373
    • (2006) J Adhes Dent , vol.8 , pp. 367-373
    • Perdigao, J.1    Gomes, G.2    Gondo, R.3    Fundingsland, J.W.4
  • 127
  • 128
    • 39449131490 scopus 로고    scopus 로고
    • Influence of time on bond strength after bleaching with 35% hydrogen peroxide
    • Barbosa C.M., Sasaki R.T., Florio F.M., and Basting R.T. Influence of time on bond strength after bleaching with 35% hydrogen peroxide. J Contemp Dent Pract 9 (2008) 81-88
    • (2008) J Contemp Dent Pract , vol.9 , pp. 81-88
    • Barbosa, C.M.1    Sasaki, R.T.2    Florio, F.M.3    Basting, R.T.4
  • 129
    • 24944555021 scopus 로고    scopus 로고
    • Shear bond strengths of two composite core materials after using all-in-one and single-bottle dentin adhesives
    • Sen D., and Akgungor G. Shear bond strengths of two composite core materials after using all-in-one and single-bottle dentin adhesives. J Prosthodont 14 (2005) 97-103
    • (2005) J Prosthodont , vol.14 , pp. 97-103
    • Sen, D.1    Akgungor, G.2
  • 130
    • 0033187009 scopus 로고    scopus 로고
    • Effect of removal of surface collagen fibrils on resin-dentin bonding
    • Prati C., Chersoni S., and Pashley D.H. Effect of removal of surface collagen fibrils on resin-dentin bonding. Dent Mater 15 (1999) 323-331
    • (1999) Dent Mater , vol.15 , pp. 323-331
    • Prati, C.1    Chersoni, S.2    Pashley, D.H.3
  • 131
    • 16644369144 scopus 로고    scopus 로고
    • Shear bond strength after dentin bleaching with 10% carbamide peroxide agents
    • Basting R.T., Freitas P.M., Pimenta L.A., and Serra M.C. Shear bond strength after dentin bleaching with 10% carbamide peroxide agents. Braz Oral Res 18 (2004) 162-167
    • (2004) Braz Oral Res , vol.18 , pp. 162-167
    • Basting, R.T.1    Freitas, P.M.2    Pimenta, L.A.3    Serra, M.C.4
  • 132
    • 36148933786 scopus 로고    scopus 로고
    • Shear bond strength of resin composite to enamel and dentin submitted to a carbamide peroxide dentifrice
    • da Silva B.M., Florio F.M., and Basting R.T. Shear bond strength of resin composite to enamel and dentin submitted to a carbamide peroxide dentifrice. Am J Dent 20 (2007) 319-323
    • (2007) Am J Dent , vol.20 , pp. 319-323
    • da Silva, B.M.1    Florio, F.M.2    Basting, R.T.3
  • 133
    • 0038654174 scopus 로고    scopus 로고
    • Six-month storage-time evaluation of one-bottle adhesive systems to dentin
    • [discussion 49]
    • Giannini M., Seixas C.A., Reis A.F., and Pimenta L.A. Six-month storage-time evaluation of one-bottle adhesive systems to dentin. J Esthet Restor Dent 15 (2003) 43-48 [discussion 49]
    • (2003) J Esthet Restor Dent , vol.15 , pp. 43-48
    • Giannini, M.1    Seixas, C.A.2    Reis, A.F.3    Pimenta, L.A.4
  • 134
    • 0036833754 scopus 로고    scopus 로고
    • Comparison of shear bond strength relative to two testing devices
    • Pecora N., Yaman P., Dennison J., and Herrero A. Comparison of shear bond strength relative to two testing devices. J Prosthet Dent 88 (2002) 511-515
    • (2002) J Prosthet Dent , vol.88 , pp. 511-515
    • Pecora, N.1    Yaman, P.2    Dennison, J.3    Herrero, A.4
  • 135
    • 33749179524 scopus 로고    scopus 로고
    • Adhesion of composite to enamel and dentin surfaces irradiated by IR laser pulses of 0.5-35 micros duration
    • Staninec M., Gardner A.K., Le C.Q., Sarma A.V., and Fried D. Adhesion of composite to enamel and dentin surfaces irradiated by IR laser pulses of 0.5-35 micros duration. J Biomed Mater Res B Appl Biomater 79 (2006) 193-201
    • (2006) J Biomed Mater Res B Appl Biomater , vol.79 , pp. 193-201
    • Staninec, M.1    Gardner, A.K.2    Le, C.Q.3    Sarma, A.V.4    Fried, D.5
  • 136
    • 0033129016 scopus 로고    scopus 로고
    • The effect of dentine location and tubule orientation on the bond strengths between resin and dentine
    • Phrukkanon S., Burrow M.F., and Tyas M.J. The effect of dentine location and tubule orientation on the bond strengths between resin and dentine. J Dent 27 (1999) 265-274
    • (1999) J Dent , vol.27 , pp. 265-274
    • Phrukkanon, S.1    Burrow, M.F.2    Tyas, M.J.3
  • 137
    • 0036582511 scopus 로고    scopus 로고
    • A comparison of microtensile bond strengths of several dentin bonding systems to primary and permanent dentin
    • Burrow M.F., Nopnakeepong U., and Phrukkanon S. A comparison of microtensile bond strengths of several dentin bonding systems to primary and permanent dentin. Dent Mater 18 (2002) 239-245
    • (2002) Dent Mater , vol.18 , pp. 239-245
    • Burrow, M.F.1    Nopnakeepong, U.2    Phrukkanon, S.3
  • 139
    • 31644441430 scopus 로고    scopus 로고
    • Durability of resin-dentin bonds related to water and oil storage
    • Carrilho M.R., Carvalho R.M., Tay F.R., Yiu C., and Pashley D.H. Durability of resin-dentin bonds related to water and oil storage. Am J Dent 18 (2005) 315-319
    • (2005) Am J Dent , vol.18 , pp. 315-319
    • Carrilho, M.R.1    Carvalho, R.M.2    Tay, F.R.3    Yiu, C.4    Pashley, D.H.5
  • 140
    • 33845362572 scopus 로고    scopus 로고
    • Bond strengths of a 1-step self-etching system to caries-affected and normal dentin
    • Pereira P.N., Nunes M.F., Miguez P.A., and Swift Jr. E.J. Bond strengths of a 1-step self-etching system to caries-affected and normal dentin. Oper Dent 31 (2006) 677-681
    • (2006) Oper Dent , vol.31 , pp. 677-681
    • Pereira, P.N.1    Nunes, M.F.2    Miguez, P.A.3    Swift Jr., E.J.4
  • 143
    • 0036580873 scopus 로고    scopus 로고
    • Effect of caries disclosing agents on bond strengths of total-etch and self-etching primer dentin bonding systems to resin composite
    • Kazemi R.B., Meiers J.C., and Peppers K. Effect of caries disclosing agents on bond strengths of total-etch and self-etching primer dentin bonding systems to resin composite. Oper Dent 27 (2002) 238-242
    • (2002) Oper Dent , vol.27 , pp. 238-242
    • Kazemi, R.B.1    Meiers, J.C.2    Peppers, K.3
  • 144
    • 33746980752 scopus 로고    scopus 로고
    • Er:YAG laser cavity preparation and composite resin bonding with a single-component adhesive system: relationship between shear bond strength and microleakage
    • Bertrand M.F., Semez G., Leforestier E., Muller-Bolla M., Nammour S., and Rocca J.P. Er:YAG laser cavity preparation and composite resin bonding with a single-component adhesive system: relationship between shear bond strength and microleakage. Lasers Surg Med 38 (2006) 615-623
    • (2006) Lasers Surg Med , vol.38 , pp. 615-623
    • Bertrand, M.F.1    Semez, G.2    Leforestier, E.3    Muller-Bolla, M.4    Nammour, S.5    Rocca, J.P.6
  • 145
    • 33846937867 scopus 로고    scopus 로고
    • The effect of thermocycling on the adhesion of self-etching adhesives on dental enamel and dentin
    • El-Araby A.M., and Talic Y.F. The effect of thermocycling on the adhesion of self-etching adhesives on dental enamel and dentin. J Contemp Dent Pract 8 (2007) 17-24
    • (2007) J Contemp Dent Pract , vol.8 , pp. 17-24
    • El-Araby, A.M.1    Talic, Y.F.2
  • 146
    • 0035462366 scopus 로고    scopus 로고
    • "No-bottle" vs "multi-bottle" dentin adhesives-a microtensile bond strength and morphological study
    • Frankenberger R., Perdigao J., Rosa B.T., and Lopes M. "No-bottle" vs "multi-bottle" dentin adhesives-a microtensile bond strength and morphological study. Dent Mater 17 (2001) 373-380
    • (2001) Dent Mater , vol.17 , pp. 373-380
    • Frankenberger, R.1    Perdigao, J.2    Rosa, B.T.3    Lopes, M.4
  • 147
    • 0034188507 scopus 로고    scopus 로고
    • Microtensile bond strengths of seven dentin adhesive systems
    • Tanumiharja M., Burrow M.F., and Tyas M.J. Microtensile bond strengths of seven dentin adhesive systems. Dent Mater 16 (2000) 180-187
    • (2000) Dent Mater , vol.16 , pp. 180-187
    • Tanumiharja, M.1    Burrow, M.F.2    Tyas, M.J.3
  • 150
    • 33144480156 scopus 로고    scopus 로고
    • Tensile and shear bond strength evaluation of a total-etch three-step and two self-etching one-step dentin bonding systems
    • Maurin J.C., Lagneau C., Durand M., Lissac M., and Seux D. Tensile and shear bond strength evaluation of a total-etch three-step and two self-etching one-step dentin bonding systems. J Adhes Dent 8 (2006) 27-30
    • (2006) J Adhes Dent , vol.8 , pp. 27-30
    • Maurin, J.C.1    Lagneau, C.2    Durand, M.3    Lissac, M.4    Seux, D.5
  • 151
    • 0035754647 scopus 로고    scopus 로고
    • Tensile bond strengths of fourth- and fifth-generation dentin adhesives with packable resin composites
    • Koh S.H., Powers J.M., Bebermeyer R.D., and Li D. Tensile bond strengths of fourth- and fifth-generation dentin adhesives with packable resin composites. J Esthet Restor Dent 13 (2001) 379-386
    • (2001) J Esthet Restor Dent , vol.13 , pp. 379-386
    • Koh, S.H.1    Powers, J.M.2    Bebermeyer, R.D.3    Li, D.4
  • 152
    • 43049098948 scopus 로고    scopus 로고
    • Comparison between regional micropush-out and microtensile bond strength of resin composite to dentin
    • Cekic-Nagas I., Ergun G., Nagas E., Tezvergil A., Vallittu P.K., and Lassila L.V. Comparison between regional micropush-out and microtensile bond strength of resin composite to dentin. Acta Odontol Scand 66 (2008) 73-81
    • (2008) Acta Odontol Scand , vol.66 , pp. 73-81
    • Cekic-Nagas, I.1    Ergun, G.2    Nagas, E.3    Tezvergil, A.4    Vallittu, P.K.5    Lassila, L.V.6
  • 153
    • 26944434783 scopus 로고    scopus 로고
    • Resin composites: strength of the bond to dentin versus surface energy parameters
    • Asmussen E., and Peutzfeldt A. Resin composites: strength of the bond to dentin versus surface energy parameters. Dent Mater 21 (2005) 1039-1043
    • (2005) Dent Mater , vol.21 , pp. 1039-1043
    • Asmussen, E.1    Peutzfeldt, A.2
  • 154
    • 4944240874 scopus 로고    scopus 로고
    • In vitro comparison of dentin bonding systems: effect of testing method and operator
    • Moll K., Fritzenschaft A., and Haller B. In vitro comparison of dentin bonding systems: effect of testing method and operator. Quintessence Int 35 (2004) 845-852
    • (2004) Quintessence Int , vol.35 , pp. 845-852
    • Moll, K.1    Fritzenschaft, A.2    Haller, B.3
  • 156
    • 0031598471 scopus 로고    scopus 로고
    • Microtensile bond strength testing and failure analysis of two dentin adhesives
    • Armstrong S.R., Boyer D.B., and Keller J.C. Microtensile bond strength testing and failure analysis of two dentin adhesives. Dent Mater 14 (1998) 44-50
    • (1998) Dent Mater , vol.14 , pp. 44-50
    • Armstrong, S.R.1    Boyer, D.B.2    Keller, J.C.3
  • 159
    • 41649106704 scopus 로고    scopus 로고
    • Direct dentin bonding technique sensitivity when using air/suction drying steps
    • [discussion 139-140]
    • Magne P., Mahallati R., Bazos P., and So W.S. Direct dentin bonding technique sensitivity when using air/suction drying steps. J Esthet Restor Dent 20 (2008) 130-138 [discussion 139-140]
    • (2008) J Esthet Restor Dent , vol.20 , pp. 130-138
    • Magne, P.1    Mahallati, R.2    Bazos, P.3    So, W.S.4
  • 160
    • 12344331831 scopus 로고    scopus 로고
    • Microtensile bond strength of self-etching adhesives to enamel and dentin
    • Goracci C., Sadek F.T., Monticelli F., Cardoso P.E., and Ferrari M. Microtensile bond strength of self-etching adhesives to enamel and dentin. J Adhes Dent 6 (2004) 313-318
    • (2004) J Adhes Dent , vol.6 , pp. 313-318
    • Goracci, C.1    Sadek, F.T.2    Monticelli, F.3    Cardoso, P.E.4    Ferrari, M.5
  • 163
    • 56849083858 scopus 로고    scopus 로고
    • Long-term durability of one-step adhesive-composite systems to enamel and dentin
    • Foxton R.M., Melo L., Stone D.G., Pilecki P., Sherriff M., and Watson T.F. Long-term durability of one-step adhesive-composite systems to enamel and dentin. Oper Dent 33 (2008) 651-657
    • (2008) Oper Dent , vol.33 , pp. 651-657
    • Foxton, R.M.1    Melo, L.2    Stone, D.G.3    Pilecki, P.4    Sherriff, M.5    Watson, T.F.6
  • 164
    • 0036615480 scopus 로고    scopus 로고
    • Relationship of dentin shear bond strengths to different laboratory test designs
    • Dickens S.H., and Milos M.F. Relationship of dentin shear bond strengths to different laboratory test designs. Am J Dent 15 (2002) 185-192
    • (2002) Am J Dent , vol.15 , pp. 185-192
    • Dickens, S.H.1    Milos, M.F.2
  • 165
    • 0346910233 scopus 로고    scopus 로고
    • Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength
    • Cho B.H., and Dickens S.H. Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength. Dent Mater 20 (2004) 107-115
    • (2004) Dent Mater , vol.20 , pp. 107-115
    • Cho, B.H.1    Dickens, S.H.2
  • 166
    • 27744596032 scopus 로고    scopus 로고
    • The influence of the cutting speed on bond strength and integrity of microtensile specimens
    • Sadek F.T., Cury A.H., Monticelli F., Ferrari M., and Cardoso P.E. The influence of the cutting speed on bond strength and integrity of microtensile specimens. Dent Mater 21 (2005) 1144-1149
    • (2005) Dent Mater , vol.21 , pp. 1144-1149
    • Sadek, F.T.1    Cury, A.H.2    Monticelli, F.3    Ferrari, M.4    Cardoso, P.E.5
  • 168
    • 0033084173 scopus 로고    scopus 로고
    • Do dentin bond strength tests serve a useful purpose?
    • Sudsangiam S., and van Noort R. Do dentin bond strength tests serve a useful purpose?. J Adhes Dent 1 (1999) 57-67
    • (1999) J Adhes Dent , vol.1 , pp. 57-67
    • Sudsangiam, S.1    van Noort, R.2
  • 169
    • 0022764778 scopus 로고
    • A statistical approach to the mechanical testing of dental materials
    • McCabe J.F., and Carrick T.E. A statistical approach to the mechanical testing of dental materials. Dent Mater 2 (1986) 139-142
    • (1986) Dent Mater , vol.2 , pp. 139-142
    • McCabe, J.F.1    Carrick, T.E.2
  • 170
    • 0022764710 scopus 로고
    • The treatment of results for tensile bond strength testing
    • McCabe J.F., and Walls A.W. The treatment of results for tensile bond strength testing. J Dent 14 (1986) 165-168
    • (1986) J Dent , vol.14 , pp. 165-168
    • McCabe, J.F.1    Walls, A.W.2
  • 171
    • 75349090263 scopus 로고    scopus 로고
    • TS-11405. Testing of adhesion to tooth structure
    • ISO
    • ISO-TS-11405. Testing of adhesion to tooth structure; 2003.
    • (2003)
  • 172
    • 0035350653 scopus 로고    scopus 로고
    • The influence of water storage and C-factor on the dentin-resin composite microtensile bond strength and debond pathway utilizing a filled and unfilled adhesive resin
    • Armstrong S.R., Keller J.C., and Boyer D.B. The influence of water storage and C-factor on the dentin-resin composite microtensile bond strength and debond pathway utilizing a filled and unfilled adhesive resin. Dent Mater 17 (2001) 268-276
    • (2001) Dent Mater , vol.17 , pp. 268-276
    • Armstrong, S.R.1    Keller, J.C.2    Boyer, D.B.3
  • 173
    • 12344299287 scopus 로고    scopus 로고
    • Resin-dentin interfacial ultrastructure and microtensile dentin bond strength after five-year water storage
    • Armstrong S.R., Vargas M.A., Chung I., Pashley D.H., Campbell J.A., Laffoon J.E., and Qian F. Resin-dentin interfacial ultrastructure and microtensile dentin bond strength after five-year water storage. Oper Dent 29 (2004) 705-712
    • (2004) Oper Dent , vol.29 , pp. 705-712
    • Armstrong, S.R.1    Vargas, M.A.2    Chung, I.3    Pashley, D.H.4    Campbell, J.A.5    Laffoon, J.E.6    Qian, F.7
  • 174
    • 0042809966 scopus 로고    scopus 로고
    • Microtensile bond strength of a total-etch 3-step, total-etch 2-step, self-etch 2-step, and a self-etch 1-step dentin bonding system through 15-month water storage
    • Armstrong S.R., Vargas M.A., Fang Q., and Laffoon J.E. Microtensile bond strength of a total-etch 3-step, total-etch 2-step, self-etch 2-step, and a self-etch 1-step dentin bonding system through 15-month water storage. J Adhes Dent 5 (2003) 47-56
    • (2003) J Adhes Dent , vol.5 , pp. 47-56
    • Armstrong, S.R.1    Vargas, M.A.2    Fang, Q.3    Laffoon, J.E.4
  • 175
    • 0034173027 scopus 로고    scopus 로고
    • Tensile bond strength of filled and unfilled adhesives to dentin
    • Braga R.R., Cesar P.F., and Gonzaga C.C. Tensile bond strength of filled and unfilled adhesives to dentin. Am J Dent 13 (2000) 73-76
    • (2000) Am J Dent , vol.13 , pp. 73-76
    • Braga, R.R.1    Cesar, P.F.2    Gonzaga, C.C.3
  • 177
    • 0242573335 scopus 로고    scopus 로고
    • Effect of bleaching on fracture toughness of composite-dentin bonds
    • Far C., and Ruse N.D. Effect of bleaching on fracture toughness of composite-dentin bonds. J Adhes Dent 5 (2003) 175-182
    • (2003) J Adhes Dent , vol.5 , pp. 175-182
    • Far, C.1    Ruse, N.D.2
  • 178
    • 0035290210 scopus 로고    scopus 로고
    • Fracture resistance of dentin-composite interfaces using different adhesive resin layers
    • Tam L.E., Khoshand S., and Pilliar R.M. Fracture resistance of dentin-composite interfaces using different adhesive resin layers. J Dent 29 (2001) 217-225
    • (2001) J Dent , vol.29 , pp. 217-225
    • Tam, L.E.1    Khoshand, S.2    Pilliar, R.M.3
  • 179
    • 0027603779 scopus 로고
    • Fracture toughness of dentin/resin-composite adhesive interfaces
    • Tam L.E., and Pilliar R.M. Fracture toughness of dentin/resin-composite adhesive interfaces. J Dent Res 72 (1993) 953-959
    • (1993) J Dent Res , vol.72 , pp. 953-959
    • Tam, L.E.1    Pilliar, R.M.2
  • 180
    • 0032106876 scopus 로고    scopus 로고
    • Fracture toughness determination of composite resin and dentin/composite resin adhesive interfaces by laboratory testing and finite element models
    • Toparli M., and Aksoy T. Fracture toughness determination of composite resin and dentin/composite resin adhesive interfaces by laboratory testing and finite element models. Dent Mater 14 (1998) 287-293
    • (1998) Dent Mater , vol.14 , pp. 287-293
    • Toparli, M.1    Aksoy, T.2
  • 181
    • 0032009984 scopus 로고    scopus 로고
    • Effect of hybrid layer on fracture toughness of adhesively bonded dentin-resin composite joint
    • Armstrong S.R., Boyer D.B., Keller J.C., and Park J.B. Effect of hybrid layer on fracture toughness of adhesively bonded dentin-resin composite joint. Dent Mater 14 (1998) 91-98
    • (1998) Dent Mater , vol.14 , pp. 91-98
    • Armstrong, S.R.1    Boyer, D.B.2    Keller, J.C.3    Park, J.B.4
  • 182
    • 0028488959 scopus 로고
    • Failure mechanisms at the human dentin-resin interface: a fracture mechanics approach
    • Lin C.P., and Douglas W.H. Failure mechanisms at the human dentin-resin interface: a fracture mechanics approach. J Biomech 27 (1994) 1037-1047
    • (1994) J Biomech , vol.27 , pp. 1037-1047
    • Lin, C.P.1    Douglas, W.H.2
  • 183
    • 0034439090 scopus 로고    scopus 로고
    • Nominal shear or fracture mechanics in the assessment of composite-dentin adhesion?
    • Tantbirojn D., Cheng Y.S., Versluis A., Hodges J.S., and Douglas W.H. Nominal shear or fracture mechanics in the assessment of composite-dentin adhesion?. J Dent Res 79 (2000) 41-48
    • (2000) J Dent Res , vol.79 , pp. 41-48
    • Tantbirojn, D.1    Cheng, Y.S.2    Versluis, A.3    Hodges, J.S.4    Douglas, W.H.5
  • 184
    • 0030222067 scopus 로고    scopus 로고
    • Novel fracture toughness test using a notchless triangular prism (NTP) specimen
    • Ruse N.D., Troczynski T., MacEntee M.I., and Feduik D. Novel fracture toughness test using a notchless triangular prism (NTP) specimen. J Biomed Mater Res 31 (1996) 457-463
    • (1996) J Biomed Mater Res , vol.31 , pp. 457-463
    • Ruse, N.D.1    Troczynski, T.2    MacEntee, M.I.3    Feduik, D.4
  • 186
    • 33746308453 scopus 로고    scopus 로고
    • Influence of water, loading rate and bonder on the adhesion of porcelain to titanium
    • Homann F., Waddell J.N., and Swain M.V. Influence of water, loading rate and bonder on the adhesion of porcelain to titanium. J Dent 34 (2006) 485-490
    • (2006) J Dent , vol.34 , pp. 485-490
    • Homann, F.1    Waddell, J.N.2    Swain, M.V.3
  • 187
    • 0033222608 scopus 로고    scopus 로고
    • New approach for evaluating metal-porcelain interfacial bonding
    • Suansuwan N., and Swain M.V. New approach for evaluating metal-porcelain interfacial bonding. Int J Prosthodont 12 (1999) 547-552
    • (1999) Int J Prosthodont , vol.12 , pp. 547-552
    • Suansuwan, N.1    Swain, M.V.2
  • 188
    • 34248343497 scopus 로고    scopus 로고
    • Influence of the bonder on the adhesion of porcelain to machined titanium as determined by the strain energy release rate
    • Tholey M.J., Waddell J.N., and Swain M.V. Influence of the bonder on the adhesion of porcelain to machined titanium as determined by the strain energy release rate. Dent Mater 23 (2007) 822-828
    • (2007) Dent Mater , vol.23 , pp. 822-828
    • Tholey, M.J.1    Waddell, J.N.2    Swain, M.V.3
  • 189
    • 14844355576 scopus 로고    scopus 로고
    • The influence of Goldbonder and pre-heat treatment on the adhesion of titanium alloy and porcelain
    • Yamada K., Onizuka T., Endo K., Ohno H., and Swain M.V. The influence of Goldbonder and pre-heat treatment on the adhesion of titanium alloy and porcelain. J Oral Rehabil 32 (2005) 213-220
    • (2005) J Oral Rehabil , vol.32 , pp. 213-220
    • Yamada, K.1    Onizuka, T.2    Endo, K.3    Ohno, H.4    Swain, M.V.5
  • 191
    • 0034242898 scopus 로고    scopus 로고
    • Characterisation of tribochemically assisted bonding of composite resin to porcelain and metal
    • Sun R., Suansuwan N., Kilpatrick N., and Swain M. Characterisation of tribochemically assisted bonding of composite resin to porcelain and metal. J Dent 28 (2000) 441-445
    • (2000) J Dent , vol.28 , pp. 441-445
    • Sun, R.1    Suansuwan, N.2    Kilpatrick, N.3    Swain, M.4
  • 192
    • 0027650875 scopus 로고
    • Adherence of resin-based luting agents assessed by the energy of fracture
    • Asmussen E., Attal J.P., and Degrange M. Adherence of resin-based luting agents assessed by the energy of fracture. Acta Odontol Scand 51 (1993) 235-240
    • (1993) Acta Odontol Scand , vol.51 , pp. 235-240
    • Asmussen, E.1    Attal, J.P.2    Degrange, M.3
  • 193
    • 0033125435 scopus 로고    scopus 로고
    • Influence of surface treatment on adherence energy of alloys used in bonded prosthetics
    • Moulin P., Degrange M., and Picard B. Influence of surface treatment on adherence energy of alloys used in bonded prosthetics. J Oral Rehabil 26 (1999) 413-421
    • (1999) J Oral Rehabil , vol.26 , pp. 413-421
    • Moulin, P.1    Degrange, M.2    Picard, B.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.