Water sorption and solubility of four self-etching, self-adhesive resin luting agents

Journal of Adhesive Dentistry

Volumn 12, Issue 1, 2010, Pages 39-43

  Vrochari, Areti D ^a   Eliades, George ^a   Hellwig, Elmar ^b   Wrbas, Karl T ^b  

^a UNIVERSITY OF ATHENS   (Greece)

^b UNIVERSITY OF FREIBURG   (Germany)

Author keywords

Dual set materials; Resin luting agents; Self adhesive resin luting agents; Self etching; Water solubility; Water sorption

Indexed keywords

RESIN CEMENT; WATER;

ABSORPTION; ANALYSIS OF VARIANCE; ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTAL ACID ETCHING; MATERIALS TESTING; METHODOLOGY; NONPARAMETRIC TEST; SOLUBILITY;

ABSORPTION; ACID ETCHING, DENTAL; ANALYSIS OF VARIANCE; MATERIALS TESTING; RESIN CEMENTS; SOLUBILITY; STATISTICS, NONPARAMETRIC; WATER;

EID: 77951233172     PISSN: 14615185     EISSN: 17579988     Source Type: Journal    
DOI: 10.3290/j.jad.a17539     Document Type: Article

References (45)

1. Biscem Product Profile. Bisco, Inc., 2003.
2. Cox CF, Keall CL, Keall HJ, Ostro E, Bergenholtz G. Biocompatibility of surface- sealed dental materials against exposed pulps. J Prosthet Dent 1987;57: 1-8.
3. Darr AH, Jacobsen PH. Conversion of dual cure luting cements. J Oral Rehabil 1995;22: 43-47.
4. Diaz-Arnold AM, Arnold MA, Williams VD. Measurement of water sorption by resin composite adhesives with Near-Infrared Spectroscopy. J Dent Res 1992;71(3): 438-442.
5. de Mendonca AAM, Souza PPC, Hebling J, de Souza Costa CA. Cytotoxic effects of hard-setting cements applies on the odontoblast cell line MDPC-23. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2007;104: e102-e108.
6. Escribano N, de la Macorra JC. Microtensile bond strength of self-adhesive luting cements to ceramic. J Adhes Dent 2006;8: 337-341.
7. Feilzer AJ, Kakaboura AL, de Gee AJ, Davidson CL. The influence of water sorption on the development of setting shrinkage stress in traditional and resin-modified glass ionomer cements. Dent Mater 1995;11: 186-190.
8. Going RE, Sawinski VJ. Microleakage of a new restorative material. J Am Dent Assoc 1966;73: 107-115.
9. Hansel C, Leyhausen G, Mai UEH, Geurtsen W. Effects of various resin composite (co)monomers and extracts on two caries-associated micro-organisms in vitro. Dent Mater 1998;77: 60-67.
10. Hansen EK, Asmussen E. Visible-light curing units: correlation between depth of cure and distance between exit window and resin surface. Acta Odontol Scand 1997;55: 162-166.
11. Huang C, Tay FR, Cheung GSP, Kei LH, Wei SHY, Pashley DH. Hygroscopic expansion of a compomer and a composite on artificial gap reduction. J Dent 2002;30: 11-19.
12. International Organization for Standardization. ISO 4049, 2000.
13. Ito S, Hashimoto M, Wadgaonkar B, Svizero N, Carvalho RM, Yiu C, Rueggeberg FA, Foulger S, Saito T, Nishitani Y, Yoshiyama M, Tay FR, Pashley DH. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomater 2005;26: 6449-6459.
14. Iwami Y, Yamamoto H, Sato W, Kawai K, Torii M, Ebisu S. Weight change of various light-cured restorative materials after water immersion. Oper Dent 1998;23: 132-137.
15. Johnston JF, Phillips RW, Dykema RW. In: Modern practice in crown and bridge prosthodontics, ed 3. Philadelphia: WB Saunders, 1971: 363.
16. Mac Dougall M, Selden JK, Nydegger JR, Carnes DL. Immortalized mouse odontoblast cell line M06-G3 application for in vitro biocompatibility testing. Am J Dent 1997;11: 11-16.
17. Mak YF, Lai SC, Cheung GS, Chan AW, Tay FR, Pashley DH. Micro-tensile bond testing of resin cements to dentin and an indirect resin composite. Dent Mater 2002;18: 609-621.
18. Martin N, Jedynakiewicz N. Measurement of water sorption in dental composites. Biomater 1998;19: 77-83.
19. Maxcem Technical Bulletin: Kerr Corporation, 2006.
20. Mesu FP. Degradation of luting cements measured in vitro. J Dent Res 1982;61: 665-672.
21. Milleding P, Örtengren U, Karlsson S. Ceramic inlay systems: Some clinical aspects. J Oral Rehabil 1995;22: 571-580.
22. Mjör IA, Moorhead JE, Dahl JE. Reasons for replacement of restorations in permanent teeth in general dental practice. Int Dent J 2000;50: 362-366.
23. Mortier E, Gerdolle DA, Jacquot B, Panighi MM. Importance of water sorption and solubility studies for couple bonding agent-resin-based filling material. Oper Dent 2004;29: 669-676.
24. Multilink Sprint Scientifique Documentation: Ivoclar Vivadent AG, 2006.
25. Munksgaard EC, Freund M. Enzymatic hydrolysis of (di)methacrylates and their polymers. Scand J Dent Res 1990;98: 261-267.
26. Örtengren U, Wellendorf H, Karlsson S, Ruyter IE. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment. J Oral Rehabil 2001;28: 1106-1115.
27. Oysaed H, Ruyter IE. Water sorption and filler characteristics of composites for use in posterior teeth. J Dent Res 1986a;65: 1315-1318.
28. Oysaed H, Ruyter IE. Composites for use in posterior teeth. Mechanical properties tested under dry and wet conditions. J Biomed Mater Res 1986b;20: 261-271.
29. Oysaed H, Ruyter IE, Sjovic Kleven IJ. Release of formaldehyde from dental composites. J Dent Res 1988;67: 1289-1294.
30. Palmer G, Anstice HM, Pearson GJ. The effect of curing regime on the release of hydroxyethyl methacrylate (HEMA)from resin-modified glassionomer cements. J Dent 1999;27: 303-311.
31. Pearson GJ, Longman CM. Water sorption and solubility of resin-based materials following inadequate polymerization by a visible-light curing system. J Oral Rehabil 1989;16: 57-61.
32. Rasetto FH, Driscoll CF, von Fraunhofer JA. Effect of light source and time on the polymerization of resin cement through ceramic veneers. J Prosthodont 2001;10: 133-139.
33. Rathbun MA, Craig RG, Hanks CT, Filisko FE. Cytotoxicity of a bis-GMA dental composite before and after leaching in organic solvents. J Biomed Mater Res 1991;25: 443-457.
34. RelyX Unicem Technical Data Sheet: 3M ESPE AG, Seefeld Germany, 2002.
35. Ruyter IE. Physical and chemical aspects related to substances released from polymer materials in an aqueous environment. Adv Dent Res 1995; 9: 344-347.
36. Scarret DC, Söderholm KJ, Ybatich CD. Water and abrasive effects on three-body wear of composites. J Dent Res 1991;70: 1074-1081.
37. Segura A, Donly KJ. In vitro posterior composite polymerization recovery following hygroscopic expansion. J Oral Rehabil 1993;20: 495-499.
38. Söderholm KJ. Filler leachability during water storage of six composite materials. J Dent Res 1990;98: 82-88.
39. Söderholm KJ. Degradation of glass filler in experimental composites. J Dent Res 1981;60: 1867-1875.
40. Söderholm KJ, Zigan M, Ragan M, Fischlschweiger W, Bergman M. Hydrolytic degradation of dental composites. J Dent Res 1984;63: 1248-1254.
41. Söderholm KJ, Mariotti A. Bis-GMA based resins in dentistry. Are they safe? J Am Dent Assoc 1999;130: 201-209.
42. Söderholm KJ, Roberts MJ. Influence of water exposure on the tensile strength of composites. J Dent Res 1990;69: 1812-1816.
43. Sundfeld RH, Valentino TA, de Alexandre RS, Briso ALF, Sundefeld MLMM. Hybrid layer thickness and resin tag length of a self etching adhesive bonded to sound dentin. J Dent 2005;33: 675-681.
44. Vrochari AD. Water sorption, water solubility and curing efficiency of four new, self-etching self-adhesive resin cements. Dr Thesis, Freiburg, Germany, 2008.
45. Yoshida K, Tanagawa M, Atsuta M. In-vitro solubility of three types of resin and conventional luting cements. J Oral Rehabil 1998;25: 285-291.