Polycrystal orientation effects on microslip and mixed-mode behavior of microstructurally small cracks

ASTM Special Technical Publication

Volumn , Issue 1359, 1999, Pages 203-228

  Bennett, Valerie ^a   McDowell, David L ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; CRACK PROPAGATION; CRYSTAL MICROSTRUCTURE; CRYSTAL ORIENTATION; FATIGUE OF MATERIALS; GRAIN BOUNDARIES; PLASTICITY; POLYCRYSTALLINE MATERIALS; STRESS ANALYSIS; TENSILE STRESS;

CRYSTAL PLASTICITY; CYCLIC SLIP; MIXED MODE FRACTURE;

FRACTURE MECHANICS;

EID: 0032623693     PISSN: 10403094     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp14251s     Document Type: Article

References (42)

1. Tanaka, K., "Mechanics and Micromechanics of Fatigue Crack Propagation," In Fracture Mechanics: Perspectives and Directions (20th Symposium), ASTM STP 1020, R. P. Wei and R. P. Gangloff, Eds., American Society for Testing and Materials, Philadelphia, 1989, pp. 151-183.
2. Morris, W., Metallurgical Transactions, Vol. 11A, 1980, pp. 1117-1123.
3. Morris, W., James, M., and Zurek, A., "Extent of Crack Tip Plasticity for Short Fatigue Cracks," Scripta Metallurgica, Vol. 19, 1985, pp. 149-153.
4. Akinawa, Y., Tanaka, K., and Matsui, E., "Statistical Characteristics of Propagation of Small Fatigue Cracks in Smooth Specimens of Aluminum Alloy 2024-T3," Materials Science and Engineering, Vol. A104, 1988, pp. 105-115.
5. Lankford, J., "Influence of Microstructure on the Growth of Small Fatigue Cracks," Fatigue and Fracture of Engineering Materials and Structures, Vol. 8, 1985, pp. 161-175.
6. Hayashi, I., Suzuki, T., Ishii, H., and Oiyama, M., "Crystallographic Orientation Dependence of Fatigue Crack Propagation in Extremely Low Carbon Steel," Proceedings 27th Japan Congress on Materials Research, 1984, pp. 93-98.
7. Suzuki, T., Shigemoto, H., Tsuchiya, H., and Hayashi, I., "Crystallographic Orientation Dependence of Fatigue Crack Propagation in Low Carbon Steel," Proceedings 28th Japan Congress on Materials Research, 1985, pp. 65-71.
8. Tanaka, K., Nakai, Y., and Matsui, E., Materials Science and Engineering, Vol. 17, 1981, pp. 519-533.
9. de los Rios, E. R., Mohamed, H. J., and Miller K. J., Fatigue and Fracture of Engineering Materials and Structures, Vol. 8, 1985, pp. 49-63.
10. Tanaka, K., Akinawa, Y., Nakaki, Y., and Wei, R. P., "Modeling of Small Fatigue Crack Growth Interacting with Grain Boundary," Engineering Fracture Mechanics, Vol. 24, 1986, pp. 803-819.
11. Li, C., "Vector CTD Analysis for Crystallographic Crack Growth," Acta Metallurgica et Materialia, Vol. 38, No. 11, 1990, pp. 2129-2134.
12. Weertman, J., "Fatigue Crack Propagation Theories," Fatigue and Microstructure, American Society For Metals, Metals Park, Ohio, 1979, pp. 279-306.
13. Wang, C. H. and Miller, K. J., "The Effects of Mean and Alternating Shear Stresses on Short Fatigue Crack Growth Rates," Fatigue and Fracture of Engineering Materials and Structures, Vol. 15, No. 12, 1992, pp. 1223-1236.
14. Lankford, J. and Leverant, G. R., "Experimental Characterization of Fatigue Crack Tip Processes," Journal of Metals, 1985, pp. 54-57.
15. Li, C., "On the Interaction Among Stage I Short Crack, Slip Band and Grain Boundary: A FEM Analysis," International Journal of Fracture, Vol. 43, 1990, pp. 227-239.
16. Koss, D. A. and Chan, K. S., Acta Metallica, Vol. 28, 1980, p. 1295.
17. th International Conference on Biaxial/Multiaxial Fatigue and Fracture, Cracow, Poland, 1997, pp. 325-348.
18. McDowell, D. L. and Berard, J.-Y., "A ΔJ-Based Approach to Biaxial Fatigue," Fatigue and Fracture of Engineering Materials and Structures, Vol. 15, No. 8, 1992, pp. 719-741.
19. Fatemi, A. and Socie, D. F., "A Critical Plane Approach to Multiaxial Fatigue Damage Including Out-of-Phase Loading," Fatigue and Fracture of Engineering Materials and Structures, Vol. 11, No. 3, 1988, pp. 149-165.
20. Kurath, P. and Fatemi, A., "Cracking Mechanisms for Mean Stress/Strain Low-Cycle Multiaxial Fatigue Loading," in Quantitative Methods in Fractography, ASTM STP 1085, B. M. Strauss and S. K. Putatunda, Eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 123-143.
21. Brown, M. and Miller, K. J., "A Theory for Fatigue Failure Under Multiaxial Stress-Strain Conditions," Proceedings Institution for Mechanical Engineers, London, Vol. 187, No. 65, 1973. pp. 745-755.
22. McDowell, D. L., "Multiaxial Fatigue Strength," ASM Handbook on Fatigue and Fracture, Vol. 19, 1996, pp. 263-273.
23. Dang-Van, K., "Macro-Micro Approach in High Cycle Multiaxial Fatigue," in Advances in Multiaxial Fatigue, ASTM STP 1191, D. L. McDowell and R. Ellis, Eds., American Society of Testing and Materials, Philadelphia, 1993, pp. 120-130.
24. Papadopoulos, I. Y., "High Cycle Fatigue Criterion Applied in Biaxial and Triaxial Out-of-Phase Stress Conditions," Fatigue and Fracture of Engineering Materials and Structures, Vol. 18, No. 1, 1995, pp. 79-91.
25. Crisfield, M. A., "Plasticity Computations Using the Mohr-Coulomb Yield Criterion," Engineering Computations, Vol. 4, 1987, pp. 300-308.
26. Socie, D. F., "Critical Plane Approaches for Multiaxial Fatigue Damage Assessment," in Advances in Multiaxial Fatigue, ASTM STP 1191, D. L. McDowell and R. Ellis, Eds., American Society of Testing and Materials, Philadelphia, 1993, pp. 7-36.
27. Rashid, M. M. and Nemat-Nasser, S., "A Constitutive Algorithm for Rate-Dependent Crystal Plasticity," Computer Methods in Applied Mechanics and Engineering, Vol. 94, 1992, pp. 201-228.
28. Rashid, M. M., "Texture Evolution and Plastic Response of Two-Dimensional Polycrystals," Journal of the Mechanics and Physics and Solids, Vol. 40, No. 5, 1992, pp. 1009-1029.
29. ABAQUS, Ver. 5.7, Hibbitt, Karlsson & Sorensen, Inc., Pawtucket, RI, 1998.
30. Cailletaud, G., Doquet, V., and Pineau, A., "Cyclic Multiaxial Behavior of an Austenitic Stainless Steel: Microstructural Observations and Micromechanical Modeling," in Fatigue Under Biaxial and Multiaxial Loading, ESIS 10, K. Kussmaul, S. McDiarmid, and D. Socie, Eds., Mechanical Engineering Publications, London, 1991, pp. 131-149.
31. Jordan, E. H. and Walker, K. P., "A Viscoplastic Model for Single Crystals," ASME Journal of Engineering Materials and Technology, Vol. 114, 1992, pp. 19-26.
32. Cuitiño, A. M. and Ortiz, M., "Computational Modeling of Single Crystals," Modeling and Simulation in Materials Science and Engineering, Vol. 1, 1992, pp. 225-263.
33. Roven, H. J. and Nes, E., "Cyclic Deformation of Ferritic Steel-I. Stress-Strain Response and Structure Evolution," Acta Metallurgica et Materialia, Vol. 39, No. 8, 1991, pp. 1719-1733.
34. Hoshide, T. and Socie, D. F., "Crack Nucleation and Growth Modeling in Biaxial Fatigue," Engineering Fracture Mechanics, Vol. 29, No. 3, 1988, pp. 287-299.
35. Navarro, A. and de los Rios, E. R., "A Model for Short Fatigue Crack Propagation with an Interpretation of the Short-Long Crack Transition," Fatigue and Fracture of Engineering Materials and Structures. Vol. 10, No. 2, 1987, pp. 169-186.
36. Tanaka, K., "Short-Crack Fracture Mechanics in Fatigue Conditions," Current Research on Fatigue Cracks, T. Tanaka, M. Jono, and K. Komai, Eds., Current Japanese Materials Research, Elsevier, 1, 1987, pp. 93-117.
37. Li, C., "A Three-Dimensional Finite Element Analysis for of Crystallographic Crack Near the Interface of an Incompatible Bicrystal," Fatigue and Fracture of Engineering Materials and Structures, Vol. 16, No. 1, 1992, pp. 21-35.
38. Venkataraman, G., Chung, Y. W., and Mura, T., "Application of Minimum Energy Formalism in a Multiple Slip Band Model for Fatigue-I. Calculation of Slip Band Spacings," Acta Metallurgica Materialia, Vol. 39, No. 11, 1991, pp. 2621-2629.
39. Nisitani, H., "Behavior of Small Cracks in Fatigue and Relating Phenomena," in Current Research on Fatigue Cracks, T. Tanaka, M. Jono, and K. Komai, Eds., Current Japanese Materials Research, Vol. 1, Elsevier, 1987, pp. 1-26.
40. Repetto, E. A. and Ortiz, M., "A Micromechanical Model of Cyclic Deformation and FatigueCrack Nucleation in f.c.c. Single Crystals," Acta Materialia, Vol. 45, No. 6, 1997, pp. 2577-2595.
41. Gall, K., Sehitoglu, H., and Kadioglu, Y., "FEM Study of Fatigue Crack Closure Under Double Slip," Acta Materialia, Vol. 44, No. 10, 1996, pp. 3955-3965.
42. Lawson, L., Chen, E. Y., and Meshii, M., "Microstructural Fracture in Metal Fatigue," International Journal of Fatigue, Vol. 19, Supp. No. 1, 1997, pp. S61-S67.