Energy criteria and cumulative damage during fatigue crack growth

International Journal of Fatigue

Volumn 20, Issue 9, 1998, Pages 641-649

  Skelton, R P ^a   Vilhelmsen, T ^b   Webster, G A ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

^b DONG Energy AS   (Denmark)

Author keywords

Cyclic plastic zone; Damage accumulation; Failure energy; Process zone

Indexed keywords

CRACK PROPAGATION; ELASTICITY; PLASTICITY; STRAIN RATE;

CYCLIC PLASTIC ZONE; NONLINEAR PLASTIC THEORY;

FATIGUE OF MATERIALS;

EID: 0032188027     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0142-1123(98)00027-9     Document Type: Article

References (56)

1. Paris, P. C. and Erdogan, F., J. Basic Eng., Trans ASME, 1963, 85, 528-534.
2. Hoeppner, D. W. and Krupp, W. E., Eng. Fract Mech., 1974, 6, 47-70.
3. Schwalbe, K.-H., Eng. Fract. Mech., 1974, 6, 325-421.
4. Irving, P. E. and McCartney, L. N., Metal Sci., 1977, 11, 351-361.
5. Baïlon, J.-P. and Antolovich, S. D. In Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage, eds J. Lankford et al., ASTM STP 811, Philadelphia, 1983, pp. 313-349.
6. Webster, G. A. and Ainsworth, R. A., High Temperature Component Life Assessment, Chapman and Hall, London, 1994.
7. Vilhelmsen, T. and Webster, G. A., Service Experience and Reliability Improvement: Nuclear, Fossil and Petroleum Plants, PVP-Vol. 288, ed. W. H. Bamford, ASME, New York, 1994, pp. 291-295.
8. Glinka, G., Int. J. Fatigue, 1982, 4, 59-67.
9. Glinka, G., Robin, C., Pluvinage, G. and Chehimi, C., Int. J. Fatigue, 1984, 4, 37-47.
10. Lloyd, G. J. In Fatigue at High Temperature, ed. R. P. Skelton, Applied Science Publishers, London, 1983, pp. 187-258.
11. Weertman, J., Int. J. Fract. Mech., 1966, 2, 460-467.
12. Fine, M. E. and Davidson, D. L. In Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage, ed. J. Lankford et al., ASTM STP 811, Philadelphia, 1983, pp. 350-370.
13. Majumdar, S. and Morrow, J., Fracture Toughness and Slow-Stable Cracking. ASTM STP 559, Philadelphia, 1974, pp. 159-182.
14. Chakrabortty, S. B., Fatigue Eng. Mater. Struct., 1979, 2, 331-344.
15. Antolovich, S. D., Saxena, A. and Chanani, G. R., Eng. Fract. Mech., 1974, 7, 649-652.
16. Glinka, G., Eng. Fract. Mech., 1985, 21, 245-262.
17. Glinka, G., Low Cycle Fatigue, ASTM STP 942, ed. H. Solomon et al., Philadelphia, 1988, pp. 1022-1047.
18. Knott, J. F., Fundamentals of Fracture Mechanics, Butterworth, London, 1973.
19. Hutchinson, J. W., J. Mech. Phys. Solids, 1968, 16, 13-31.
20. Hutchinson, J. W., J. Mech. Phys. Solids, 1968, 16, 337-347.
21. Rice, J. R. and Rosengren, G. F., J. Mech. Phys. Solids, 1968, 16, 1-12.
22. Riedel, H., Fracture at High Temperatures, Springer-Verlag, Berlin, 1987, p. 37.
23. Skelton, R. P., Mater. Sci. Technol., 1991, 7, 427-439.
24. Skelton, R. P., Rees, C. J. and Webster, G. A., Fatigue Fract. Eng. Mater. Struct., 1996, 19, 287-297.
25. Kliman, V. and Bily, M., Mater. Sci. Eng., 1984, 68, 11-18.
26. Skelton, R. P., Mater. Sci. Eng., 1994, 9, 1001-1008.
27. Tanaka, K. and Matsuoka, S., Int. J. Fract., 1977, 13, 563-583.
28. Tanaka, K., Int. J. Fract., 1979, 15, 57-68.
29. LeFebvre, D. and Ellyin, F., Int. J. Fatigue, 1984, 6, 9-15.
30. Fournier, D. and Pineau, A., Metall. Trans., 1977, 8A, 1095-1105.
31. Corwin, W. R., Booker, M. K., Booker, B. L. P. and Brinkman, C. R., ORNL Report No. 5355, 1978.
32. Saxena, A., Gieseke, B., Yoon, K. B., Norris, R. H. and Banerji, K., Elevated Temperature Crack Growth, Vol. 18, Materials Division, ASME, New York, 1990, pp. 113-121.
33. Pedron, J. P. and Pineau, A., Mater. Sci Eng., 1982, 56, 143-156.
34. Cowles, B. A., Sims, D. L., Warren, J. R. and Miner, R. V., J. Eng. Mater. Technol. (Trans ASME), 1980, 102, 356-363.
35. Huang, J. S. and Pelloux, R. M., Metall. Trans, 1980, 11A, 899-904.
36. Jaske, C. E., Frey, N. D. and Utah, D. A. In Application of Materials for Pressure Vessels and Piping, ed. G. V. Smith, MPC-10, ASME, New York, 1979, pp. 175-210.
37. Conway, J. B., Stentz, R. H. and Berling, J. T., Fatigue, Tensile and Relaxation Behaviour of Stainless Steels, TID-26135, US Atomic Energy Commission, 1975.
38. Clavel, M., Levaillant, C. and Pineau, A. In Creep-Fatigue Environment Interactions, eds R. M. Pelloux and N. S. Stoloff, Proc. TMS-AIME Symp. Fall Meeting, Milwaukee, 1980, pp. 24-45.
39. Bressers, J. and Verhegghe, B., Project CCR-2, COST 50, P/COST/11/2.1, 1980.
40. Bressers, J., Roth, M., Tambuyser, P. and Fenske, E., Final Report, Project CCR-2, COST 50, Round II, Report EUR 8162, 1982.
41. Castelli, M. G., Miner, R. V. and Robinson, D. N. In Thermomechanical Fatigue Behaviour of Materials, ed. H. Sehitoglu, ASTM STP 1186, Philadelphia, 1993, pp. 106-125.
42. Skelton, R. P. and Webster, G. A., Mater. Sci. Engng., 1996, A216, 139-154.
43. Li, S. X., High temperature creep-fatigue and crack growth behaviour of a single crystal nickel base superalloy, Ph.D. Thesis, University of Bristol, 1993.
44. Affeldt, E. E., Timm, J. and Bennett, A. In Fatigue under Thermal and Mechanical Loading, eds J. Bressers et al., Kluwer Academic Publishers, Dordrecht, 1996, pp. 159-168.
45. Miller, M. S. and Gallagher, J. P. in Fatigue Crack Growth Measurement and Data Analysis, eds S. J. Hudak et al., ASTM STP 738, Philadelphia, 1981, pp. 205-251.
46. Skelton, R. P., Beech, S. M., Holdsworth, S. R., Neate, G. J., Miller, D. A. and Priest, R. H. In Behaviour of Defects at High Temperatures, ESIS 15, eds R. A. Ainsworth and R. P. Skelton, MEP, London, 1993, pp. 299-325.
47. Skelton, R. P. In Behaviour of Defects at High Temperatures, ESIS 15, eds R. A. Ainsworth and R. P. Skelton, MEP, London, 1993, pp. 191-218.
48. James, L. A., Stress Analysis and Growth of Cracks, ASTM STP 513, Philadelphia, 1972, pp. 218-229.
49. Ohtani, R., Kitamura, T., Nitta, A. and Kuwabara, K. In Low Cycle Fatigue, eds H. Solomon et al., ASTM STP 942, Philadelphia, 1988, pp. 1163-1180.
50. Gayda, J., Gabb, T. P. and Miner, R. V. In Low Cycle Fatigue, eds H. Solomon et al., ASTM STP 942, Philadelphia, 1988, pp. 293-309.
51. Shahinian, P. and Sadananda, K., Proc. ASME-MPC-3 Symposium Creep-Fatigue Interaction, ASME, New York, 1976, pp. 365-390.
52. Tsuzaki, K., Hori, T., Maki, T. and Tamura, I., Mater. Sci. Eng., 1983, 61, 247-260.
53. Reger, M. and Rémy, L., Mater. Sci Eng. A, 1988, 101, 47-54.
54. Antolovich, S. D., Liu, S. and Baur, R., Metall. Trans., 1981, 12A, 473-481.
55. Wells, C. H. and Sullivan, C. P., Trans. ASM, 1967, 60, 217-222.
56. Wells, C. H. and Sullivan, C. P., Trans. ASM, 1968, 61, 149-155.