An engineering model for propagation of small cracks in fatigue

Engineering Fracture Mechanics

Volumn 56, Issue 3, 1997, Pages 357-377

  Mcdowell, D L ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; CRACK INITIATION; CRACK PROPAGATION; FATIGUE OF MATERIALS; LOADS (FORCES); MATHEMATICAL MODELS; MICROCRACKS; MICROSTRUCTURE; PLASTICITY; STRAIN;

ELASTIC PLASTIC FRACTURE MECHANICS (EPFM); J INTEGRAL APPROACH; LINEAR ELASTIC FRACTURE MECHANICS (LEFM); PLASTICITY INDUCED CLOSURES;

FRACTURE MECHANICS;

CRACK PROPAGATION; FATIGUE; MODELS;

EID: 0031079571     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0013-7944(96)00057-4     Document Type: Article

References (53)

1. McDowell, D. L. and Berard, J.-Y., A ΔJ-based approach to biaxial low-cycle fatigue of shear damaged materials. In Fatigue Under Biaxial and Multiaxial Loading, ESIS10, ed. K. Kussmaul, D. McDiarmid and D. Socie. Mechanical Engineering Publications, London, 1984, pp. 413-431.
2. McDowell, D. L. and Berard, J.-Y., A ΔJ-based approach to biaxial fatigue. Fatigue Fracture Engineering & Material Structure, 1992, 15(8), 719-741.
3. McDowell, D. L. and Poindexter, V., Multiaxial fatigue modelling based on microcrack propagation: stress state and amplitude effects. In Proceedings of the Fourth International Conference on Biaxial/Multiaxial Fatigue, St Germain en Laye, France, 1994, pp. 115-130.
4. Socie, D. F., Estimating fatigue crack initiation and propagation lives in notched plates under variable loading histories. T.& A.M. Report no. 417, University of Illinois, 1977.
5. Newman, J. C. Jr, A review of modelling small-crack behavior and fatigue-life predictions for aluminum alloys. Fatigue Fracture Engineering & Material Structure, 1994, 17(4), 429-439.
6. McClung, R. C., Chan, K. S., Hudak, S. J., Jr and Davidson, D. L., Analysis of small crack behavior for airframe applications. In FAA/NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance, Part 11, Hampton, VA, NASA CP 3274, 1994, pp. 463-479.
7. Manson, S. S. and Halford, G. R., Re-examination of cumulative fatigue damage analysis - an engineering perspective. Engng Fracture Mech., 1986, 25(5-6), 539-571.
8. Tanaka, K., Akiniwa, Y., Nakai, Y. and Wei, R. P., Modelling of small fatigue crack growth interacting with grain boundary. Engng Fracture Mech., 1986, 24(6), 803-819.
9. Tanaka, K., Short-crack fracture mechanics in fatigue conditions. In Current Research on Fatigue Cracks, Current Japanese Materials Research, Vol. 1, ed. T. Tanaka, M. Jono and K. Komai. Elsevier, Amsterdam, 1987, pp. 93-117.
10. Navarro, A. and De Los Rios, E. R., A model for short fatigue crack propagation with an interpretation of the short-long crack transition. Fatigue Fracture Engineering & Material Structure, 1987, 10, 169-186.
11. Miller, K. J., The two thresholds of fatigue behaviour. Fatigue Fracture Engineering & Material Structure, 1993, 16(9), 931-939.
12. Miller, K. J., Materials science perspective of metal fatigue resistance. Mater. Sci. Technol., 1993, 9, 453-462.
13. Socie, D., Multiaxial fatigue damage models. ASME J. Engng Mater. Technol., 1987, 109, 293-298.
14. Socie, D. F., Critical plane approaches for multiaxial fatigue damage assessment. In Advances in Multiaxial Fatigue, ASTM STP 1191, ed. D.L. McDowell and R. Ellis. ASTM, Philadelphia, 1983, pp. 7-36.
15. Nisitani, H., Behavior of small cracks in fatigue and relating phenomena. In Current Research on Fatigue Cracks Current Japanese Materials Research, Vol. 1, ed. T. Tanaka, M. Jono and K. Komai. Elsevier, Amsterdam, 1987, pp. 1-26.
16. Hoshide, T. and Socie, D., Mechanics of mixed mode small fatigue crack growth. Engng Fracture Mech., 1987, 26(6), 842-850.
17. Ogata, T., Nitta, A. and Blass, J. J., Propagation behavior of small cracks in 304 stainless steel under biaxial low-cycle fatigue at elevated temperature. In Advances in Multiaxial Fatigue, ASTM STP 1191, ed. D. L. McDowell and R. Ellis. ASTM, Philadelphia, 1993, pp. 313-325.
18. Harada, S., Murakami, Y., Fukushima, Y. and Endo, T., Reconsideration of macroscopic low cycle fatigue laws through observation of microscopic fatigue process on a medium carbon steel. In Low Cycle Fatigue, ASTM STP 942, ed. H.D. Solomon et al. ASTM, Philadelphia, 1988, pp. 1181-1198.
19. Socie, D. F., Hua, C. T. and Worthem, D. W., Mixed mode small crack growth. Fatigue Fracture Engineering & Material Structure, 1987, 10(1), 1-16.
20. Berard, J.-Y., McDowell, D. L. and Antolovich, S. D., Damage observations of a low-carbon steel under tension-torsion low-cycle fatigue. In Advances in Multiaxial Fatigue, ASTM STP 1191, ed. D.L. McDowell and R. Ellis, ASTM, Philadelphia, 1993, pp. 326-344.
21. Brown, M. and Miller, K. J., A theory for fatigue failure under multiaxial stress-strain conditions. Proc. Institute of Mechanical Engineering, London, 1973, 187(65), 745-755.
22. Brown, M. and Miller, K. J., Two decades of progress in the assessment of multiaxial low-cycle fatigue life. In Low Cycle Fatigue and Life Prediction, ASTM STP 770, ed. C. Amzallag et al. ASTM, Philadelphia, 1982, pp. 482-499.
23. Dowling, N. E., Fatigue at notches and the local strain and fracture mechanics approaches. In Fracture Mechanics, ASTM STP 677, ed. C.W. Smith. ASTM, Philadelphia, 1979, pp. 247-273.
24. McClung, R. C. and Sehitoglu, H., Closure and growth of fatigue cracks at notches. ASME J. Engng Mater. Technol., 1992, 114, 1-7.
25. Lankford, J. and Davidson, D. L., The micromechanisms of small fatigue crack growth and the influence of metallurgical factors. In Small Fatigue Cracks. TMS, 1985, pp. 51-71.
26. Sarfarazi, M. and Ghosh, S., Microfracture in polycrystalline solids. Engng Fracture Mech., 1987, 27(3), 257-267.
27. Venkataraman, G., Chung, T., Nakasone, Y. and Mura, T., Free-energy formulation of fatigue crack initiation along persistent slip bands: calculation of S-N curves and crack depths. Acta Metall. Mater., 1990, 38(1), 31-40.
28. Venkataraman, G., Chung, Y. and Mura, T., Application of minimum energy formalism in a multiple slip band model for fatigue. Acta Metall. Mater., 1991, 39(11), 2621-2683.
29. 3Al + B single crystals. Acta Metall. Mater., 1990, 38(6), 1191-1200.
30. Tanaka, K. and Akiniwa, Y., Propagation and non-propagation of small fatigue cracks. In Proceedings of ICF7, Houston, TX, 1989, pp. 869-887.
31. Dang-Van, K., Macro-micro approach in high-cycle multiaxial fatigue. In Advances in Multiaxial Fatigue, ASTM STP 1191, ed. D.L. McDowell and R. Ellis. ASTM, Philadelphia, 1993, pp. 120-130.
32. Hoshide, T., Miyahara, M. and Inoue, T., Elastic-plastic behavior of short fatigue cracks in smooth specimens. In Basic Questions in Fatigue: Volume I, ASTM STP 924, ed. J.T. Fong and R.J. Fields. ASTM, Philadelphia, 1988, pp. 312-322.
33. Chan, K., Lankford, J. and Davidson, D., A comparison of crack-tip field parameters for large and small fatigue cracks. ASME J. Engng Mater. Technol., 1986, 108, 206-213.
34. McDowell, D. L., Stahl, D. R., Stock, S. R. and Antolovich, S. D., Biaxial path dependence of dislocation substructure of type 304 stainless steel. Metall. Trans., 1988, 19A, 1277-1293.
35. Cailletaud, G., Doquet, V. and Pineau, A., Cyclic multiaxial behaviour of an austenitic stainless steel: microstructural observations and micromechanical modelling. In Fatigue Under Biaxial and Multiaxial Loading, ESIS10, ed. K. Kussmaul et al. Mechanical Engineering Publications, London, 1991, pp. 131-149.
36. Morrow, J., Fatigue Design Handbook, Advances in Engineering, Vol. 4. Society of Automotive Engineers, Warrendale, PA, 1968, pp. 21-29.
37. Wang, C. H. and Miller, K. J., The effects of mean and alternating shear stresses on short fatigue crack growth rates. Fatigue Fracture Engineering & Material Structure, 1992, 15(12), 1223-1236.
38. Murakami, Y., Correlation between strain singularity at crack tip under overall plastic deformation and the exponent of the Coffin-Manson law. In Low Cycle Fatigue, ASTM STP 942, ed. H.D. Solomon et al. ASTM, Philadelphia, 1988, pp. 1048-1065.
39. Lamba, H. S., The J-integral applied to cyclic loading. Engng Fracture Mech., 1975, 7, 693.
40. Dowling, N. E. and Begley, J. A., in Mechanics of Crack Growth, ASTM STP 590. ASTM, Philadelphia, 1976, pp. 82-103.
41. Tanaka, K., The cyclic J-integral as a criterion for fatigue crack growth. Int. J. Fracture, 1983, 22, 91-104.
42. Dowling, N. E., Crack growth during low-cycle fatigue of smooth axial specimens. In Cyclic Stress-Strain and Plastic Deformation Aspects of Fatigue Crack Growth, ASTM STP 637. ASTM, Philadelphia, 1977, pp. 97-121.
43. Waill, L. E., Crack observations in biaxial fatigue. Design and Materials Division, report no. 108, UILU-ENG 83-4001, Department of Mechanics and Industrial Engineering, University of Illinois at Urbana-Champaign, 1983.
44. Socie, D. F., Dowling, N. E. and Kurath, P., Fatigue life estimation of notched members. In Fracture Mechanics, ASTM STP 833, ed. R.J. Sanford. ASTM, Philadelphia, 1984, pp. 284-299.
45. Dowling, N. E., Fatigue at notches and the local strain and fracture mechanics approaches. In Fracture Mechanics, ASTM STP 677, ed. C.W. Smith. ASTM, Philadelphia, 1979, pp. 247-273.
46. McClung, R. C. and Sehitoglu, H., Closure behavior of small cracks under high strain fatigue histories. In Mechanics of Fatigue Crack Closure, ASTM STP 982. ASTM, Philadelphia, 1988, pp. 279-299.
47. Elber, W., The significance of fatigue crack closure. In Damage Tolerance in Aircraft Structures, ASTM STP 486. ASTM, Philadelphia, 1971, pp. 230-242.
48. Suresh, S., Fatigue of Materials. Cambridge Solid State Science Series, 1st edn. Cambridge University Press, Cambridge, 1991.
49. Hua, C. T. and Socie, D. F., Fatigue damage in 1045 steel under variable amplitude biaxial loading. Fatigue Fracture & Engineering Material Structure, 1985, 8(2), 101-114.
50. Robillard, M. and Cailletaud, G., Directionally defined damage in multiaxial low-cycle fatigue: experimental evidence and tentative modelling. In Fatigue Under Biaxial and Multiaxial Loading, ESIS10, ed. K. Kussmaul, D. McDiarmid and D. Socie. Mechanical Engineering Publications, London, 1991, pp. 103-130.
51. Weiss, J. and Pineau, A., Continuous and sequential multiaxial low-cycle fatigue damage in 316 stainless steel. In Advances in Multiaxial Fatigue, ASTM STP 1191, ed. D.L. McDowell and R. Ellis. ASTM, Philadelphia, 1993, pp. 183-203.
52. Chaboche, J. L. and Lesne, P. M., A non-linear continuous fatigue damage model. Fatigue Fracture & Engineering Material Structure, 1988, 11(1), 1-17.
53. McDowell, D. L., Multiaxial fatigue modelling based on microcrack propagation. In Symposium on Material Durability/Life Prediction Modeling, ASME PVP Vol. 290. ASME Winter Annual Meeting, Chicago, IL, 1994, pp. 69-83.