A three-dimensional crystal plasticity model for duplex Ti-6Al-4V

International Journal of Plasticity

Volumn 23, Issue 9, 2007, Pages 1457-1485

  Mayeur, J R ^a   McDowell, D L ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

A. Microstructures; Anisotropic material; B. Crystal plasticity; C. Finite elements; Polycrystalline material

Indexed keywords

CRYSTALLOGRAPHY; DISLOCATIONS (CRYSTALS); LATHES; MATHEMATICAL MODELS; MICROSTRUCTURE; POLYCRYSTALLINE MATERIALS; TITANIUM ALLOYS;

CRYSTAL PLASTICITY MODELS; DUAL PHASE ALLOYS; DUPLEX MICROSTRUCTURE; FINITE ELEMENT CODES;

PLASTICITY;

EID: 34248655158     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2006.11.006     Document Type: Article

References (67)

1. ABAQUS, 2005. Ver 6.5, Hibbitt, Karlsson, and Sorensen, Inc., Pawtucket, RI.
2. Ambard A., Guetaz L., Louchet F., and Guichard D. Role of interphases in the deformation mechanisms of an α/β titanium alloy at 20 K. Mater. Sci. Eng. A 319-321 (2001) 404-408
3. Ankem S., and Margolin H. The role of elastic interaction stresses on the onset of plastic flow for oriented two ductile phase structures. Metall. Trans. A 11 (1980) 963-972
4. Ankem S., and Margolin H. Alpha-beta interface sliding in Ti-Mn alloys. Metall. Trans. A 14 (1983) 500-503
5. Asaro R.J. Micromechanics of crystals and polycrystals. Adv. Appl. Mech. 23 (1983) 1-115
6. Barton N.R., and Dawson P.R. On the spatial arrangement of lattice orientations in hot-rolled multiphase titanium. Modell. Simul. Mater. Sci. Eng. 9 (2001) 433-463
7. Bacon D.J., and Martin J.W. The atomic structure of dislocations in HCP metals. II. Behaviour of the core under an applied stress. Phil. Mag. A 43 (1981) 901-909
8. Barton N., Dawson P., and Miller M. Yield strength asymmetry predictions from polycrystal elastoplasticity. J. Eng. Mater. Technol.-Trans. ASME 121 (1999) 230-239
9. Bassani J.L., Ito K., and Vitek V. Complex macroscopic plastic flow arising from non-planar dislocation core structures. Mater. Sci. Eng. A 319-321 (2001) 97-101
10. Bhattacharyya D., Viswanathan G.B., Denkenberger R., Furrer D., and Fraser H. The role of crystallographic and geometrical relationships between α and β phases in an α/β titanium alloy. Acta Mater. 51 (2003) 4679-4691
11. Brockman R. Analysis of elastic-plastic deformation in TiAl polycrystals. Int. J. Plasticity 19 (2003) 1749-1772
12. Chan K.S., Wojcik C.C., and Koss D.A. Deformation of an alloy with a lamellar microstructure: experimental behavior of individual Widmanstatten colonies of an alpha-beta titanium alloy. Metall. Trans. A 12 (1981) 1899-1907
13. Churchman A.T. The slip modes of titanium and the effect of purity on their occurrence during tensile deformation of single crystals. Proc. R. Soc. London, Series A 226 (1954) 216-226
14. Collings E.W. The physical metallurgy of titanium alloys (1984), American Society for Metals, Metals Park, OH
15. Cuitino A.M., and Ortiz M. Computational modeling of single-crystals. Modell. Simul. Mater. Sci. Eng. 1 (1993) 225-263
16. Duesbery M.S. The dislocation core and plasticity. In: Nabarro F.R.N. (Ed). Dislocations in Solids vol. 8 (1989), North-Holland Pub. Co., Amsterdam, New York 67-173
17. Dunst D., and Mecking H. Analysis of experimental and theoretical rolling textures of two-phase titanium alloys. Z. Metallk. 87 (1996) 498-507
18. Feaugas X., and Clavel M. Cyclic deformation behaviour of an alpha/beta titanium alloy. I. Micromechanisms of plasticity under various loading paths. Acta Mater. 45 (1997) 2685-2701
19. Fundenberger J.J., Philippe M.J., Wagner F., and Esling C. Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys). Acta Mater. 45 (1997) 4041-4055
20. Girshick A., Pettifor D.G., and Vitek V. Atomistic simulation of titanium. II. Structure of 1/3〈1 2 1 0〉 screw dislocations and slip systems in titanium. Phil. Mag. A 77 (1998) 999-1012
21. Goh C.-H., Wallace J.M., Neu R.W., and McDowell D.L. Polycrystal plasticity simulations of fretting fatigue. Int. J. Fatigue 23 (2001) S423-S435
22. Goh C.-H., Neu R.W., and McDowell D.L. Crystallographic plasticity in fretting of Ti-6AL-4V. Int. J. Plasticity 19 (2003) 1627-1650
23. 3Al single crystals. J. Mat. Sci. 36 (2001) 2851-2863
24. Hasija V., Ghosh S., Mills M.J., and Joseph D.S. Deformation and creep modeling in polycrystalline Ti-6Al alloys. Acta Mater. 51 (2003) 4533-4549
25. Kalidindi S.R. Incorporation of deformation twinning in crystal plasticity models. J. Mech. Phys. Solids 46 (1998) 267-290
26. Kalidindi S.R., Salem A.A., and Doherty R.D. Role of deformation twinning on strain hardening in cubic and hexagonal polycrystalline metals. Adv. Eng. Mater. 5 (2003) 229-232
27. Kurath, P., 1999. Final Report: Biaxial fatigue of Ti-6-4 at 20 °C. UIUC #1-5-521170.
28. Lebensohn R.A., and Canova G.R. A self-consistent approach for modelling texture development of two-phase polycrystals: Application to titanium alloys. Acta Mater. 45 (1997) 3687-3694
29. Legrand B. Relation between the electronic structure and ease of gliding in hexagonal close-packed metals. Phil. Mag. B 49 (1984) 171-184
30. Legrand B. Dislocation 1984 (1984), CNRS, Paris pp. 73-92
31. Legrand B. Core structure of the screw dislocations 1/3〈1 1 2 0〉 in titanium. Phil. Mag. A 52 (1985) 83-97
32. Liang M.H., and Bacon D.J. Computer simulation of dislocation cores in HCP metals. II. Core structure in unstressed crystals. Phil. Mag. A 53 (1986) 181-204
33. Lutjering G., and Williams J.C. Titanium (2003), Springer, New York
34. Martin, J.W., Bacon, D.J., 1976. In: Proceedings of the 1976 International Conference on Computer Simulation for Materials Applications. Nat. Bur. Standards, Washington, DC, pp. 298-309.
35. Mayeur, J.R., 2004. Three-dimensional modeling of titanium-aluminum alloys with application to attachment fatigue. M.S. Thesis, Georgia Institute of Technology, Atlanta, GA, USA.
36. McGinty, R.D., 2001. Multiscale representation of polycrystalline inelasticity. Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, GA.
37. McGinty R.D., and McDowell D.L. Multiscale polycrystal plasticity. J. Eng. Mater. Technol. 121 (1999) 203-209
38. Medina Perilla J.A., and Gil Sevillano J. Two-dimensional sections of the yield locus of Ti-6%Al-4%V alloy with a strong transverse-type crystallographic α-texture. Mater. Sci. Eng. A 201 (1995) 103-110
39. Morrissey, R.J., 2001. Strain accumulation and shakedown in fatigue of Ti-6Al-4V. Ph.D. Thesis, Georgia Institute of Technology, Atlanta, GA.
40. Morrissey R.J., Goh C.-H., and McDowell D.L. Microstructure-scale modeling of HCF deformation. Mech. Mater. 35 (2003) 295-311
41. Naka S., and Lasalmonie A. Cross-slip on the first order pyramidal plane (10-11) of 〈a〉-type dislocations [1-2 1 0] in the plastic deformation of α-titanium single crystals. J. Mater. Sci. 18 (1983) 2613-2617
42. Naka S., Lasalmonie A., Costa P., and Kubin L.P. The low-temperature plastic deformation of α-titanium and the core structure of 〈a〉-type screw dislocations. Phil. Mag. A 57 (1988) 717-740
43. Neeraj T., and Mills M.J. Short-range order (SRO) and its effect on the primary creep behavior of a Ti-6wt.%Al alloy. Mater. Sci. Eng. A 319-321 (2001) 415-419
44. Neeraj T., Hou D.H., Daehn G.S., and Mills M.J. Phenomenological and microstructural analysis of room temperature creep in titanium alloys. Acta Mater. 48 (2000) 1225-1238
45. Neeraj T., Savage M.F., Tatalovich J., Kovarik L., Hayes R.W., and Mills M.J. Observation of tension-compression asymmetry in α and α-β titanium alloys. Phil. Mag. A 85 (2005) 279-295
46. Paton N.E., Williams J.C., and Rauscher G.P. The deformation of α-phase titanium. Titanium Science and Technology (1973), Plenum, Oxford 1049-1069
47. Peters M., Gysler A., and Lutjering G. Influence of texture on fatigue properties of Ti-6AL-4V. Metall. Trans. A 15 (1984) 1597-1605
48. Philippe M.J., Bouzy E., and Fundenberger J.J. Textures and anisotropy of titanium alloys. Mater. Sci. Forum 273-275 (1998) 511-522
49. Picu R.C., and Majorell A. Mechanical behavior of Ti-6Al-4V at high and moderate temperatures. II. Constitutive modeling. Mater. Sci. Eng. A 326 (2002) 306-316
50. Regnier P., and Dupouy J.M. Prismatic slip in beryllium and the relative ease of glide in H.C.P. metals. Phys. Stat. Solidi 39 (1970) 79-93
51. Savage M.F., Tatalovich J., Zupan M., Hemker K.J., and Mills M.J. Deformation mechanisms and microtensile behavior of single colony Ti-6242Si. Mater. Sci. Eng. A 319-321 (2001) 398-403
52. Savage M.F., Neeraj T., and Mills M.J. Observations of room-temperature creep recovery in titanium alloys. Metall. Mater. Trans. A 33 (2002) 891-898
53. Savage M.F., Tatalovich J., and Mills M.J. Anisotropy in the room-temperature deformation of α-β colonies in titanium alloys: role of the α-β interface. Phil. Mag. A 84 (2004) 1127-1154
54. Schoenfeld S.E., and Kad B. Texture effects on shear response in Ti-6Al-4V plates. Int. J. Plasticity 18 (2002) 461-486
55. Semiatin S.L., and Bieler T.R. Effect of texture and slip mode on the anisotropy of plastic flow and flow softening during hot working of Ti-6Al-4V. Metall. Mater. Trans. A 32 (2001) 1787-1799
56. Simmons G., and Wang H. Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook (1971), The MIT Press, Cambridge, MA
57. Sob M., Kratochvil M.J., and Kroupa F. Theory of strengthening of alpha titanium by interstitial solutes. Czech. J. Phys., Section B B25 (1975) 872-890
58. Staroselsky A., and Anand L. A constitutive model for hcp materials deforming by slip and twinning: application to magnesium alloy AZ31B. Int. J. Plasticity 19 (2003) 1843-1864
59. Suri G.G., Viswanathan G.B., Neeraj T., Hou D.-H., and Mills M.J. Room temperature deformation and mechanisms of slip transmission in oriented single-colony crystals of an α/β titanium alloy. Acta Mater. 47 (1999) 1019-1034
60. Swalla, D.R., 2003. Microstructural characterization of titanium alloys with fretting damage. Ph.D. Thesis, Georgia Institute of Technology, Atlanta, GA.
61. Swalla D.R., Neu R.W., and McDowell D.L. Microstructural characterization of Ti-6Al-4V subjected to fretting. J. Tribology 126 (2004) 809-816
62. Tyson W. Basal and prismatic slip in h.c.p. crystals. Acta Metall. 15 (1967) 574-577
63. Uchic M.D., and Dimiduk D.M. A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing. Mater. Sci. Eng. A 400-401 (2005) 268-278
64. van der Sluis O., Schreurs P.J.G., Brekelmans W.A.M., and Meijer H.E.H. Overall behaviour of heterogeneous elastoviscoplastic materials: effect of microstructural modelling. Mech. Mater. 32 (2000) 449-462
65. Vitek V. Structure of dislocation cores in metallic materials and its impact on their plastic behavior. Prog. Mater. Sci. 36 (1992) 1-27
66. Vitek V., and Igarashi M. Core structure of 1/3〈1120〉 screw dislocations on basal and prismatic planes in HCP metals: an atomistic study. Phil. Mag. A 63 (1991) 1059-1075
67. Williams J.C., Baggerly R.G., and Paton N.E. Deformation behavior of HCP Ti-Al alloy single crystals. Metall. Mater. Trans. A 33 (2002) 837-850