Modelling metal cutting using modern ductile fracture mechanics: Quantitative explanations for some longstanding problems

International Journal of Mechanical Sciences

Volumn 45, Issue 2, 2003, Pages 373-396

  Atkins, A G ^a  

^a UNIVERSITY OF READING   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; DUCTILITY; FINITE ELEMENT METHOD; FRACTURE MECHANICS; FRACTURE TOUGHNESS; FRICTION; HARDNESS; MACHINING; SHEAR STRESS; THERMOMECHANICAL TREATMENT;

DUCTILE METALS;

METAL CUTTING;

EID: 0038176862     PISSN: 00207403     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0020-7403(03)00040-7     Document Type: Article

References (60)

1. Astakhov V.P. Metal cutting mechanics. 1999;CRC Press, Boca Raton, FL.
2. Shaw M.C. Metal cutting principles. 3rd ed. 1954;MIT Press, Cambridge, MA.
3. van Luttervelt C.A., Childs T.H.C., Jawahir I.S., Flocke F., Venuvinod P.K. Progress report of the CIRP working group 'Modelling of Machining Operations'. Annals CIRP. 47:1998;587-626.
4. Camatini E. A systematic research on the cold work produced on carbon steels by machining on a lathe. Proceedings of the Eighth MTDR Conference, UMIST Part 1. 1967. p. 565-90.
5. Yang X., Liu C.R. A new stress-based model of friction behaviour in machining and its significant impact on residual stresses computed by finite element method. International Journal of Mechanical Sciences. 44:2002;703-723.
6. Lin CR, Guo YB. Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer. International Journal of Mechanical Sciences 2000;42:1069-86.
7. Strenkowski J.S., Carroll III J.T. A finite element model of orthogonal metal cutting. ASME Journal of Engineering for Industry. 107:1985;349-354.
8. Carroll III J.T., Strenkowski J.S. Finite element models of orthogonal cutting with application to single point diamond turning. International Journal of Mechanical Sciences. 30:1988;899-920.
9. Lin Z.-.C., Lo S.-.P. A study of deformation of the machined workpiece and tool under different low cutting velocities with an elastic cutting tool. International Journal of Mechanical Sciences. 40:1998;663-681.
10. Komvopoulos K., Erpenbeck S.A. Finite element modeling of orthogonal metal cutting. ASME Journal of Engineering for Industry. 113:1991;253-267.
11. Shih A.J. Finite element simulation of orthogonal metal cutting. ASME Journal of Engineering for Industry. 117:1995;84-91.
12. Usui E, Shirakashi T. Mechanics of machining - from 'Descriptive' to 'Predictive' theory. On the Art of Cutting Metals - 75 Years Later, ASME PED-vol. 7, 1982. p. 13-5.
13. Zhang B., Bagchi A. Finite element simulation of chip formation and comparison with machining experiment. ASME Journal of Engineering for Industry. 116:1994;289-297.
14. Marusich T.D., Ortiz M. Modelling and simulation of high speed machining. International Journal for Numerical Methods in Engineering. 38:1995;3675-3694.
15. Huang J.M., Black J.T. An evaluation of chip separation criteria for the FEM simulation of machining. Transactions of the ASME Journal of Manufacturing Science and Engineering. 118:1996;545-553.
16. Felbeck D.K., Atkins A.G. Strength and fracture of engineering solids. 1996;Prentice-Hall, Upper Saddle River, NJ.
17. Griffith A.A. The phenomena of rupture and flow in solids. Philosophical Transactions of the Royal Society. A221:1921;163-198.
18. Griffith AA. The theory of rupture. Proceedings of the First International Conference on Applied Mechanics, Delft, 1924. p. 55-63.
19. Obreimoff J.W. Proceedings of the Royal Society. A127:1930;290.
20. Knott J.F. Fundamentals of fracture mechanics. 1973;Butterworth & Co. London.
21. Latzko DGH. Turner CE, editors. Post yield fracture mechanics, 2nd ed. Barking: Applied Science Publishers, 1984.
22. McClintock F.A. Transactions of the ASME Journal of Applied Mechanics. 35:1968;363.
23. Rice J.R., Tracey D.M. Journal of the Mechanics and Physics of Solids. 17:1969;201.
24. Miller KJ, Structural Integrity - whose responsibility?' The 36th John Player Lecture. ProcIMechE London: I MechE, 2001.
25. Kendall K. Molecular adhesion and its applications. 2001;Kluwer Academic/Plenum Publishers, New York.
26. Bikerman J.J. Physics Status Solidi. 10:1965;3-26.
27. Atkins A.G. Ductile shear fracture mechanics. Key Engineering Materials. 177-180:2000;59-68.
28. Shaw M.C. A new mechanism of plastic flow. International Journal of Mechanical Sciences. 22:1980;673-686.
29. Kobayashi S., Thomsen E.G. Some observations on the shearing process in metal cutting. Journal of Engineering for Industry. 81:1959;251-262.
30. McClintock FA. Slip line field fracture mechanics; a new regime of fracture mechanics. In: Reuter WG, Piascik RS, editors. Fatigue and fracture mechanics: 33rd vol. ASTM STP, 1417. Philadelphia; ASTM, 2002.
31. Piispanen V. Eripaines Teknilliseslä Aikakauslehdeslä 27:1937;315. (see Piispanen V, Journal of Applied Physics 1948;19:876.).
32. Mallock A. The action of cutting tools. Proceedings of the Royal Society. XXXIII:1881;127-139.
33. Cook N.H., Finnie I., Shaw M.C. Discontinuous chip formation. Transactions of the ASME. 76:1954;153-162.
34. Boothroyd G. Fundamentals of metal machining and machine tools. 1975;Scripta Book Co. McGraw-Hill, NY.
35. Merchant M.E. Basic mechanics of the metal cutting process. Journal of Applied Mechanics. 11:1944;A168-A175.
36. Merchant M.E. Mechanics of the metal cutting process. II. Plasticity conditions in orthogonal cutting. Journal of Applied Physics. 16:1945;318-324.
37. Sata T. Recent developments concerning cutting mechanics. Proceedings of the International Production Engineering Research Conference, Pittsburgh, Penna. New York: ASME, 1963. p. 18-25.
38. Pugh HLlD. Mechanics of the cutting process. Proceedings of the Institute of Mechanical Engineering Conference on Manufacturing, Paper 53, 1958. p. 237-54.
39. Hill R. The mechanics of machining. a new approach Journal of Mechanics and Physics of Solids. 3:1954;47-53.
40. Childs THC. Private communication, 2001.
41. Stephenson D.A., Agapiou J.S. Metal cutting theory and practice. 1997;Marcel Dekker, New York.
42. Oxley P.L.B. Mechanics of machining: an analytical approach to assessing machinability. 1989;Ellis Horwood, Chichester, UK.
43. Brown R.H., Amarego E.J.A. Oblique machining with a single cutting edge. International Journal of Machine and Tool Design Research. 14:1964;9-25.
44. Atkins AG, Mai Y-W. Elastic and plastic fracture. Chichester, UK: Ellis Horwood, 1985 and 1988.
45. Okoshi M. Researches on the cutting force. Proceedings of the World Engineering Congress, Tokyo, Japan, Paper 634, 1929. p. 179-205.
46. Eggleston D.M., Herzog R., Thomsen E.G. Observations on the angle relationships in metal cutting. ASME Journal of Engineering for Industry. 81:1959;263-279.
47. Finnie I. A comparison of stress strain behaviour in cutting with that in other material tests. Proceedings International Production Engineering Research Conference, Pittsburgh, Penna. New York: ASME, 1963. p. 76-82.
48. Atkins A.G. Fracture toughness and cutting. International Journal of Production Research. 12:1974;263-274.
49. Kopalinsky EM, Oxley PLB. Size effects in metal removal processes. Institute of Physics Conference Series No 70, Third Conference on Mechanics Props at High Rates of Strain, Oxford, 1984. p. 389-96.
50. Atkins A.G. Scaling in combined plastic flow and fracture. International Journal of Mechanical Sciences. 30:1988;173-191.
51. Atkins AG. A dimensional analysis for machining to include fracture toughness. Proceedings of 2nd North American Metalworking Research Conference, Madison, Wis. Dearborn: Society of Manufacturing Engineers, 398-407, 1974.
52. ASME Research Committee on Metal Cutting: Data and Bibliography. Manual on cutting of metals. New York: ASME, 1952.
53. Shaw M.C., Oxford C.J. Transactions of the ASME. 79:1957;139-149.
54. Childs THC, MacKawa K, Obikawa T, Yamane Y. Metal cutting. London: Arnold, 2000.
55. Kopalinsky E.M., Oxley P.L.B. Predicting the effects of cold working on the machining characteristics of low carbon steels. ASME Journal of Engineering for Industry. 109:1987;257-264.
56. Trent E.M. Metal cutting. 3rd ed. 1991;Butterworth-Heinemann, Stoneham, MA.
57. Shaw M.C. Metal cutting principles. 1984;Oxford University Press, Oxford.
58. Thomsen E.G., Yang C.T., Kobayashi S. Mechanics of plastic deformation in metal processing. 1965;Macmillan, New York.
59. Zorev N.N. Metal cutting mechanics (translated JSJ Massey). 1966;Pergamon, Oxford.
60. Atkins AG. Fracture mechanics and metalforming: damage mechanics and the local approach of yesterday and today. In: Rossmanith HP editor, Fracture research in retrospect. Rotterdam; FL: Balkema, 1998.