메뉴 건너뛰기




Volumn 185, Issue 1-3, 2007, Pages 46-59

Development of hybrid predictive models and optimization techniques for machining operations

Author keywords

Cutting tools; Finite element model; Machining performance; Modeling; Optimization; Slip line model

Indexed keywords

CUTTING TOOLS; FINITE ELEMENT METHOD; MILLING (MACHINING); OPTIMIZATION; PREDICTIVE CONTROL SYSTEMS;

EID: 33847150015     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2006.03.133     Document Type: Article
Times cited : (50)

References (87)
  • 1
    • 33847118719 scopus 로고    scopus 로고
    • E.J.A. Armarego, I.S. Jawahir, V.A. Ostafiev, Patri K. Venuvinod, Modeling of machining operations, CIRP Working Group Paper, STC-C, Paris, France, 1996.
  • 2
    • 0001467934 scopus 로고
    • Chip formation, friction and high quality machined surfaces
    • Ernst H., and Merchant M.E. Chip formation, friction and high quality machined surfaces. Surf. Treat. Met. (Trans. ASM) 29 (1941) 299-378
    • (1941) Surf. Treat. Met. (Trans. ASM) , vol.29 , pp. 299-378
    • Ernst, H.1    Merchant, M.E.2
  • 3
    • 85014389707 scopus 로고
    • Basic mechanics of the metal cutting process
    • Merchant M.E. Basic mechanics of the metal cutting process. Trans. ASME 66 (1944) A168-A175
    • (1944) Trans. ASME , vol.66
    • Merchant, M.E.1
  • 4
    • 85017174102 scopus 로고
    • The theory of plasticity applied to a problem of machining
    • Lee E.H., and Shaffer B.W. The theory of plasticity applied to a problem of machining. J. Appl. Mech. 18 (1951) 405-413
    • (1951) J. Appl. Mech. , vol.18 , pp. 405-413
    • Lee, E.H.1    Shaffer, B.W.2
  • 5
    • 0000237592 scopus 로고
    • Mechanics of orthogonal machining
    • Palmer W.B., and Oxley P.L.B. Mechanics of orthogonal machining. Proc. Inst. Mech. Eng. 173 24 (1959) 623-638
    • (1959) Proc. Inst. Mech. Eng. , vol.173 , Issue.24 , pp. 623-638
    • Palmer, W.B.1    Oxley, P.L.B.2
  • 6
    • 0003128003 scopus 로고
    • A slip-line field analysis for orthogonal machining based on experimental flow fields
    • Roth R.N., and Oxley P.L.B. A slip-line field analysis for orthogonal machining based on experimental flow fields. J. Mech. Eng. Sci. 14 2 (1972) 85-91
    • (1972) J. Mech. Eng. Sci. , vol.14 , Issue.2 , pp. 85-91
    • Roth, R.N.1    Oxley, P.L.B.2
  • 7
    • 0017957840 scopus 로고
    • On the non-uniqueness of the machining process
    • Dewhurst P. On the non-uniqueness of the machining process. Proc. R. Soc. Lond. A360 (1978) 587-610
    • (1978) Proc. R. Soc. Lond. , vol.A360 , pp. 587-610
    • Dewhurst, P.1
  • 9
    • 0002802092 scopus 로고
    • Progress of 'predictive' theories in metal cutting
    • Usui E. Progress of 'predictive' theories in metal cutting. JSME Int. J. Ser. III 31 2 (1988) 363-369
    • (1988) JSME Int. J. Ser. III , vol.31 , Issue.2 , pp. 363-369
    • Usui, E.1
  • 10
    • 0242674618 scopus 로고
    • Some observations on the past and present of research on machining and grinding
    • Merchant M.E. Some observations on the past and present of research on machining and grinding. Appl. Mech. Rev. 46 3 (1993) 72-73
    • (1993) Appl. Mech. Rev. , vol.46 , Issue.3 , pp. 72-73
    • Merchant, M.E.1
  • 11
    • 33847135846 scopus 로고    scopus 로고
    • E.J.A. Armarego, Predictive modeling of machining operations - a means of bridging the gap between theory and practice, (Keynote Paper), CSME Forum, Hamilton, ON, Canada, 1996, pp. 18-27.
  • 12
    • 0022277726 scopus 로고
    • Modeling machining processes with a view to their optimization and to the adaptive control of metal cutting tools
    • Oxley P.L.B. Modeling machining processes with a view to their optimization and to the adaptive control of metal cutting tools. Robotics Comput. Integr. Manuf. 4 1-2 (1988) 103-119
    • (1988) Robotics Comput. Integr. Manuf. , vol.4 , Issue.1-2 , pp. 103-119
    • Oxley, P.L.B.1
  • 13
    • 0034479951 scopus 로고    scopus 로고
    • Predictive modeling and optimization of turning operations with complex grooved cutting tools for curled chip formation and chip breaking
    • Jawahir I.S., and Balaji A.K. Predictive modeling and optimization of turning operations with complex grooved cutting tools for curled chip formation and chip breaking. J. Mach. Sci. Technol. 4 3 (2000) 399-443
    • (2000) J. Mach. Sci. Technol. , vol.4 , Issue.3 , pp. 399-443
    • Jawahir, I.S.1    Balaji, A.K.2
  • 14
    • 33847161397 scopus 로고    scopus 로고
    • I.S. Jawahir, A.K. Balaji, R. Stevenson, C.A. van Luttervelt, Towards predictive modeling and optimization of machining operations (Keynote Paper), Symposium on Predictable Modeling in Metal Cutting as Means of Bridging Gap Between Theory and Practice, Manufacturing Science and Engineering, ASME IMECE, Dallas, TX, USA, MED-6-2, 1997, pp. 3-12.
  • 15
    • 0032311787 scopus 로고    scopus 로고
    • C.A. van Luttervelt, T. Childs, I.S. Jawahir, F. Klocke, Present situation and future trends in modeling of machining operations (Keynote Paper), Ann. CIRP 47(2) (1998) 587-626.
  • 16
    • 0345829165 scopus 로고    scopus 로고
    • G. Byrne, D. Dornfeld, B. Denkena, Advancing cutting technology (Keynote Paper), Ann. CIRP 52(2) (2003) 483-507.
  • 17
    • 33847165467 scopus 로고    scopus 로고
    • I.S. Jawahir, A.K. Balaji, R. Stevenson (Eds.), Proceedings of the 1st CIRP International Workshop on Modeling of Machining Operations, Atlanta, GA, USA, May 1998, University of Kentucky Publishing Services, Lexington, KY, USA, ISBN 0-9666706-0-4.
  • 21
    • 33847154341 scopus 로고    scopus 로고
    • R. Stevenson, I.S. Jawahir (Eds.), Proceedings of the 5th CIRP International Workshop on Modeling of Machining Operations, West Lafayette, IN, USA, May 2002, Center for Robotics and Manufacturing Systems, University of Kentucky, Lexington, KY, USA, ISBN 0-9666706-1-2.
  • 23
    • 33847109106 scopus 로고    scopus 로고
    • A CIRP survey on the available predictive performance models of machining operations
    • Armarego E.J.A., Aresecularatne J.A., Mathew P., and Verezub S. A CIRP survey on the available predictive performance models of machining operations. Ann. CIRP 51 3 (2002)
    • (2002) Ann. CIRP , vol.51 , Issue.3
    • Armarego, E.J.A.1    Aresecularatne, J.A.2    Mathew, P.3    Verezub, S.4
  • 24
    • 0004147285 scopus 로고
    • Economics of machining, machining theory and practice
    • Gilbert W. Economics of machining, machining theory and practice. Am. Soc. Met. (1950) 465-485
    • (1950) Am. Soc. Met. , pp. 465-485
    • Gilbert, W.1
  • 25
    • 0002277115 scopus 로고
    • A study of economical machining: an analysis of the maximum - profit cutting speed
    • Okushima K., and Hitomi K. A study of economical machining: an analysis of the maximum - profit cutting speed. Int. J. Prod. Res. 3 (1964) 73
    • (1964) Int. J. Prod. Res. , vol.3 , pp. 73
    • Okushima, K.1    Hitomi, K.2
  • 26
    • 0039527317 scopus 로고
    • Maximum profit rate as a criterion for the selection of machining conditions
    • Armarego E.J.A., and Russell J.K. Maximum profit rate as a criterion for the selection of machining conditions. Int. J. Mach. Tool Des. Res. 6 (1966) 1
    • (1966) Int. J. Mach. Tool Des. Res. , vol.6 , pp. 1
    • Armarego, E.J.A.1    Russell, J.K.2
  • 27
    • 0019679158 scopus 로고
    • A comprehensive machining cost model and optimization technique
    • Zdebrick W.J., and De Vor R.E. A comprehensive machining cost model and optimization technique. Ann. CIRP 30 1 (1981) 405
    • (1981) Ann. CIRP , vol.30 , Issue.1 , pp. 405
    • Zdebrick, W.J.1    De Vor, R.E.2
  • 28
    • 0019634309 scopus 로고
    • Optimization of multi-pass turning with constraints
    • Ermer D.S., and Kromodihardjo S. Optimization of multi-pass turning with constraints. Trans. ASME 103 (1981) 462-468
    • (1981) Trans. ASME , vol.103 , pp. 462-468
    • Ermer, D.S.1    Kromodihardjo, S.2
  • 29
    • 0001310525 scopus 로고
    • Development of computer-aided machining optimization for multi-pass rough turning operations
    • Kee P.K. Development of computer-aided machining optimization for multi-pass rough turning operations. Int. J. Prod. Econ. 37 (1994) 215-227
    • (1994) Int. J. Prod. Econ. , vol.37 , pp. 215-227
    • Kee, P.K.1
  • 30
    • 0029208436 scopus 로고
    • Computer-aided selection of optimum machining parameters in multi-pass turning
    • Mesquita R., Krastera E., and Doytchinov S. Computer-aided selection of optimum machining parameters in multi-pass turning. Int. J. Adv. Manuf. Technol. 10 (1995) 19-26
    • (1995) Int. J. Adv. Manuf. Technol. , vol.10 , pp. 19-26
    • Mesquita, R.1    Krastera, E.2    Doytchinov, S.3
  • 31
    • 0002191935 scopus 로고    scopus 로고
    • Multi-pass machining optimization by using fuzzy possibilistic programming and genetic algorithms
    • Alberti N., and Perrone G. Multi-pass machining optimization by using fuzzy possibilistic programming and genetic algorithms. Proc. Inst. Mech. Eng. 213B (1999) 261-273
    • (1999) Proc. Inst. Mech. Eng. , vol.213 B , pp. 261-273
    • Alberti, N.1    Perrone, G.2
  • 32
    • 0031186426 scopus 로고    scopus 로고
    • Machining condition optimization by genetic algorithms and simulated annealing
    • Khan Z., Prasad B., and Singh T. Machining condition optimization by genetic algorithms and simulated annealing. Comput. Ops. Res. 24 7 (1997) 647-657
    • (1997) Comput. Ops. Res. , vol.24 , Issue.7 , pp. 647-657
    • Khan, Z.1    Prasad, B.2    Singh, T.3
  • 33
    • 0029706779 scopus 로고    scopus 로고
    • An analytical model for cyclic chip formation in 2D machining with chip breaking
    • Fang X.D., and Jawahir I.S. An analytical model for cyclic chip formation in 2D machining with chip breaking. Ann. CIRP 45 1 (1996) 53-58
    • (1996) Ann. CIRP , vol.45 , Issue.1 , pp. 53-58
    • Fang, X.D.1    Jawahir, I.S.2
  • 34
    • 0035255893 scopus 로고    scopus 로고
    • A universal slip-line model with non-unique solutions for machining with curled chip formation and a restricted contact tool
    • Fang N., Jawahir I.S., and Oxley P.L.B. A universal slip-line model with non-unique solutions for machining with curled chip formation and a restricted contact tool. Int. J. Mech. Sci. 43 (2001) 557-580
    • (2001) Int. J. Mech. Sci. , vol.43 , pp. 557-580
    • Fang, N.1    Jawahir, I.S.2    Oxley, P.L.B.3
  • 35
    • 0027657574 scopus 로고
    • Modeling chip formation with grooved tools
    • Shi T., and Ramalingam S. Modeling chip formation with grooved tools. Int. J. Mech. Sci. 35 9 (1993) 741-756
    • (1993) Int. J. Mech. Sci. , vol.35 , Issue.9 , pp. 741-756
    • Shi, T.1    Ramalingam, S.2
  • 36
    • 0002965083 scopus 로고
    • Some new slip-line solutions for two-dimensional steady-state machining
    • Kudo H. Some new slip-line solutions for two-dimensional steady-state machining. Int. J. Mech. Sci. 7 (1965) 43-55
    • (1965) Int. J. Mech. Sci. , vol.7 , pp. 43-55
    • Kudo, H.1
  • 37
    • 85010253386 scopus 로고
    • Some slip-line fields for swaging or expanding indenting, extruding and machining for tools with curved dies
    • Johnson W. Some slip-line fields for swaging or expanding indenting, extruding and machining for tools with curved dies. Int. J. Mech. Sci. 4 (1962) 323-347
    • (1962) Int. J. Mech. Sci. , vol.4 , pp. 323-347
    • Johnson, W.1
  • 38
    • 0003048177 scopus 로고
    • Slip-line fields in metal machining which involve centered fans
    • Usui E., and Hoshi K. Slip-line fields in metal machining which involve centered fans. Int. Res. Prod. Eng. ASME 61 (1963) 61-67
    • (1963) Int. Res. Prod. Eng. ASME , vol.61 , pp. 61-67
    • Usui, E.1    Hoshi, K.2
  • 39
    • 0012442168 scopus 로고    scopus 로고
    • An analytical predictive model and experimental validation for machining with grooved tools incorporating the effects of strains, strain-rates, and temperatures
    • Fang N., and Jawahir I.S. An analytical predictive model and experimental validation for machining with grooved tools incorporating the effects of strains, strain-rates, and temperatures. Ann. CIRP 51 1 (2002) 83-86
    • (2002) Ann. CIRP , vol.51 , Issue.1 , pp. 83-86
    • Fang, N.1    Jawahir, I.S.2
  • 40
    • 18844465980 scopus 로고    scopus 로고
    • Prediction of tool-chip interface friction and chip-groove effects in machining with restricted contact grooved tools using the universal slip-line model
    • Wang X., and Jawahir I.S. Prediction of tool-chip interface friction and chip-groove effects in machining with restricted contact grooved tools using the universal slip-line model. Key Eng. Mater. 233 (2003) 469-476
    • (2003) Key Eng. Mater. , vol.233 , pp. 469-476
    • Wang, X.1    Jawahir, I.S.2
  • 41
    • 85024578285 scopus 로고
    • Finite element predictions of chip geometry and tool/workpiece temperature distributions in orthogonal metal cutting
    • Strenskowski J.S., and Moon K.J. Finite element predictions of chip geometry and tool/workpiece temperature distributions in orthogonal metal cutting. ASME J. Eng. Ind. 112 (1990) 313-318
    • (1990) ASME J. Eng. Ind. , vol.112 , pp. 313-318
    • Strenskowski, J.S.1    Moon, K.J.2
  • 42
    • 33847148999 scopus 로고    scopus 로고
    • J.-S.Wu, O.W. Dillon Jr., W-Y. Lu, Thermo-viscoplastic modeling of machining process using a mixed finite element method, In: Computational Methods in Materials Processing, MD-vol. 39/PED-vol. 61, ASME, 1992, pp. 113-128.
  • 43
    • 33847138321 scopus 로고    scopus 로고
    • S. Kumar, P. Fallböhmer, T. Altan, Computer simulation of orthogonal metal cutting processes: determination of material properties and effects of tool geometry on chip flow, Technical Papers of NAMRI/SME XXV/177 (1997) 1-6.
  • 45
    • 0036910178 scopus 로고    scopus 로고
    • Estimation of tool wear of carbide tool in orthogonal cutting using FEM simulation
    • Yen Y.-C., Söhner J., Weule H., Schmidt J., and Altan T. Estimation of tool wear of carbide tool in orthogonal cutting using FEM simulation. Mach. Sci. Technol. 6 3 (2002) 467-486
    • (2002) Mach. Sci. Technol. , vol.6 , Issue.3 , pp. 467-486
    • Yen, Y.-C.1    Söhner, J.2    Weule, H.3    Schmidt, J.4    Altan, T.5
  • 46
    • 0038298375 scopus 로고    scopus 로고
    • A finite element analysis of 2D machining with a grooved tool
    • Zhang H., Dillon Jr. O.W., and Jawahir I.S. A finite element analysis of 2D machining with a grooved tool. Trans. NAMRI XXIX (2001) 327-334
    • (2001) Trans. NAMRI , vol.XXIX , pp. 327-334
    • Zhang, H.1    Dillon Jr., O.W.2    Jawahir, I.S.3
  • 50
    • 32844460060 scopus 로고    scopus 로고
    • Variable tool-chip contact and chip morphology in machining with grooved tools: a tribological perspective
    • Bournemouth, United Kingdom
    • Balaji A.K., and Jawahir I.S. Variable tool-chip contact and chip morphology in machining with grooved tools: a tribological perspective. Proceedings of the Tribology in Environmental Design (TED 2003). Bournemouth, United Kingdom (2003) 311-323
    • (2003) Proceedings of the Tribology in Environmental Design (TED 2003) , pp. 311-323
    • Balaji, A.K.1    Jawahir, I.S.2
  • 51
    • 0028407979 scopus 로고
    • Predicting total machining performance in finish turning using integrated fuzzy-set models of the machinability parameters
    • Fang X.D., and Jawahir I.S. Predicting total machining performance in finish turning using integrated fuzzy-set models of the machinability parameters. Int. J. Prod. Res. 2 4 (1994) 833-849
    • (1994) Int. J. Prod. Res. , vol.2 , Issue.4 , pp. 833-849
    • Fang, X.D.1    Jawahir, I.S.2
  • 52
    • 0026929754 scopus 로고
    • On the interrelationships of some machinability parameters in finish turning with cermet chip forming tool insert
    • Jawahir I.S., Qureshi N.U., and Arsecularate J.A. On the interrelationships of some machinability parameters in finish turning with cermet chip forming tool insert. Int. J. Mach. Tools Manuf. 32 5 (1992) 709-723
    • (1992) Int. J. Mach. Tools Manuf. , vol.32 , Issue.5 , pp. 709-723
    • Jawahir, I.S.1    Qureshi, N.U.2    Arsecularate, J.A.3
  • 53
    • 0029425523 scopus 로고    scopus 로고
    • Z.J. Da, J.P. Sadler, X.D. Fang, I.S. Jawahir, Optimum machining performance in finish turning with complex grooved tools, Manuf. Sci. Eng., MED-vol. 2-1/MH-vol. 3-1, ASME, 1995, pp. 703-714.
  • 55
    • 0015563634 scopus 로고
    • Tool wear and tool life
    • Cook N.H. Tool wear and tool life. J. Eng. Ind. Trans. ASME 93 (1973) 931-938
    • (1973) J. Eng. Ind. Trans. ASME , vol.93 , pp. 931-938
    • Cook, N.H.1
  • 56
    • 0019172072 scopus 로고
    • A discussion on tool life criteria and total failure causes
    • Venkatesh V.C., and Satchithanandam M. A discussion on tool life criteria and total failure causes. Ann. CIRP 29 1 (1980) 19-22
    • (1980) Ann. CIRP , vol.29 , Issue.1 , pp. 19-22
    • Venkatesh, V.C.1    Satchithanandam, M.2
  • 57
    • 0029237422 scopus 로고
    • A New parametric approach for the assessment of comprehensive tool wear in coated grooved tools
    • Jawahir I.S., Li P.X., Ghosh R., and Exner E.L. A New parametric approach for the assessment of comprehensive tool wear in coated grooved tools. Ann. CIRP 44 1 (1995) 49-54
    • (1995) Ann. CIRP , vol.44 , Issue.1 , pp. 49-54
    • Jawahir, I.S.1    Li, P.X.2    Ghosh, R.3    Exner, E.L.4
  • 58
    • 33847150989 scopus 로고    scopus 로고
    • I.S. Jawahir, X.D. Fang, P.X. Li, R. Ghosh, Method of assessing tool-life in grooved tools, U.S. Patent No. 5,689,062, November 18, 1997.
  • 59
    • 0003167570 scopus 로고    scopus 로고
    • Chip-groove effects on multiple tool wear parameters in machining
    • Li P.X., Jawahir I.S., Fang X.D., and Exner E.L. Chip-groove effects on multiple tool wear parameters in machining. Trans. NAMRI 24 (1996) 33-38
    • (1996) Trans. NAMRI , vol.24 , pp. 33-38
    • Li, P.X.1    Jawahir, I.S.2    Fang, X.D.3    Exner, E.L.4
  • 60
    • 85127068762 scopus 로고    scopus 로고
    • Engaged cutting edge effects on tool-wear and tool-life in turning operations using grooved cutting tools
    • Dallas, TX
    • Li P.X., Stein D., Ghosh R., and Jawahir I.S. Engaged cutting edge effects on tool-wear and tool-life in turning operations using grooved cutting tools. Proceedings of the ASME-IMECE '97, MED-vol. 6-2. Dallas, TX (1997) 277-284
    • (1997) Proceedings of the ASME-IMECE '97, MED-vol. 6-2 , pp. 277-284
    • Li, P.X.1    Stein, D.2    Ghosh, R.3    Jawahir, I.S.4
  • 61
    • 0017969361 scopus 로고
    • Analytical prediction of three-dimensional cutting process. Part II. Chip Formation and cutting force with conventional single point tool
    • Usui E., and Hirota A. Analytical prediction of three-dimensional cutting process. Part II. Chip Formation and cutting force with conventional single point tool. J. Eng. Ind. 100 (1978) 229
    • (1978) J. Eng. Ind. , vol.100 , pp. 229
    • Usui, E.1    Hirota, A.2
  • 62
    • 0029209871 scopus 로고
    • Prediction of the chip flow direction and cutting forces in oblique machining with nose radius tools
    • Arsecularatne J.A., Mathew P., and Oxley P.L.B. Prediction of the chip flow direction and cutting forces in oblique machining with nose radius tools. Proc. Inst. Mech. Eng. 209 (1995) 305
    • (1995) Proc. Inst. Mech. Eng. , vol.209 , pp. 305
    • Arsecularatne, J.A.1    Mathew, P.2    Oxley, P.L.B.3
  • 63
    • 0033361504 scopus 로고    scopus 로고
    • Technological performance prediction models for turning with rounded corner plane faced lathe tools
    • Armarego E.J.A., and Samaranayake P. Technological performance prediction models for turning with rounded corner plane faced lathe tools. Mach. Sci. Technol. 3 2 (1999) 143-172
    • (1999) Mach. Sci. Technol. , vol.3 , Issue.2 , pp. 143-172
    • Armarego, E.J.A.1    Samaranayake, P.2
  • 64
    • 0003035130 scopus 로고    scopus 로고
    • Predicting optimum cutting conditions for turning operations at varying tool-wear states
    • Da Z.J., Sadler J.P., and Jawahir I.S. Predicting optimum cutting conditions for turning operations at varying tool-wear states. Trans. NAMRI/SME XXV (1997) 75-80
    • (1997) Trans. NAMRI/SME , vol.XXV , pp. 75-80
    • Da, Z.J.1    Sadler, J.P.2    Jawahir, I.S.3
  • 66
    • 0042063791 scopus 로고    scopus 로고
    • Progressive tool-wear mechanisms and their effects on chip curl/chip-form in machining with grooved tools: An extended application of the equivalent toolface (ET) model
    • Ee K.C., Balaji A.K., and Jawahir I.S. Progressive tool-wear mechanisms and their effects on chip curl/chip-form in machining with grooved tools: An extended application of the equivalent toolface (ET) model. Wear 255 7-12 (2003) 1404-1413
    • (2003) Wear , vol.255 , Issue.7-12 , pp. 1404-1413
    • Ee, K.C.1    Balaji, A.K.2    Jawahir, I.S.3
  • 68
    • 0026953263 scopus 로고
    • The optimization of machining operations based on a combined criterion. Part 1. The use of combined objectives in single-pass operations and Part 2. Multi-pass operations
    • Agapiou J.S. The optimization of machining operations based on a combined criterion. Part 1. The use of combined objectives in single-pass operations and Part 2. Multi-pass operations. ASME J. Eng. Ind. 114 (1992) 500-513
    • (1992) ASME J. Eng. Ind. , vol.114 , pp. 500-513
    • Agapiou, J.S.1
  • 69
    • 33847161396 scopus 로고    scopus 로고
    • J.P. Sadler, I.S. Jawahir, Z.J. Da, S.S. Lee, Method of predicting optimum machining conditions, United States Patent No. 5,801,963, 1998.
  • 70
    • 33847097566 scopus 로고    scopus 로고
    • J.P. Sadler, I.S. Jawahir, Z.J. Da, S.S. Lee, Optimization of machining with progressively worn cutting tools, United States Patent No. 5,903,474, 1999.
  • 71
    • 0000361460 scopus 로고    scopus 로고
    • A new performance-based criterion for optimum cutting conditions and cutting tool selection in finish turning
    • Da Z.J., Sadler J.P., and Jawahir I.S. A new performance-based criterion for optimum cutting conditions and cutting tool selection in finish turning. Trans. NAMRI/SME XXVI (1998) 129-134
    • (1998) Trans. NAMRI/SME , vol.XXVI , pp. 129-134
    • Da, Z.J.1    Sadler, J.P.2    Jawahir, I.S.3
  • 72
    • 0035792696 scopus 로고    scopus 로고
    • Optimization of multi-pass turning operations using Genetic Algorithms for the selection of cutting conditions and cutting tools with tool-wear effect
    • Vancouver, Canada
    • Wang X., and Jawahir I.S. Optimization of multi-pass turning operations using Genetic Algorithms for the selection of cutting conditions and cutting tools with tool-wear effect. Proceedings of the 9th IFSA World Congress and 20th NAFIPS International Conference. Vancouver, Canada (2001) 3093-3100
    • (2001) Proceedings of the 9th IFSA World Congress and 20th NAFIPS International Conference , pp. 3093-3100
    • Wang, X.1    Jawahir, I.S.2
  • 73
    • 0037097719 scopus 로고    scopus 로고
    • Performance-based optimal selection of cutting conditions and cutting tools in multi-pass turning operations using Genetic Algorithms
    • Wang X., Da Z.J., Balaji A.K., and Jawahir I.S. Performance-based optimal selection of cutting conditions and cutting tools in multi-pass turning operations using Genetic Algorithms. Int. J. Prod. Res. 40 9 (2002) 2053-2065
    • (2002) Int. J. Prod. Res. , vol.40 , Issue.9 , pp. 2053-2065
    • Wang, X.1    Da, Z.J.2    Balaji, A.K.3    Jawahir, I.S.4
  • 74
    • 0004496413 scopus 로고
    • Calculation by convex mathematical programming of the optimum cutting condition when cylindrical milling
    • Draghici G., and Paltinea C. Calculation by convex mathematical programming of the optimum cutting condition when cylindrical milling. Int. J. Mach. Tool Design Res. 14 (1974) 143
    • (1974) Int. J. Mach. Tool Design Res. , vol.14 , pp. 143
    • Draghici, G.1    Paltinea, C.2
  • 75
    • 0018106735 scopus 로고
    • Optimization of face milling
    • Kruglov E.I., and Darymov O.I. Optimization of face milling. Mach. Tool. 49 3 (1978) 35-37
    • (1978) Mach. Tool. , vol.49 , Issue.3 , pp. 35-37
    • Kruglov, E.I.1    Darymov, O.I.2
  • 76
    • 0021621681 scopus 로고
    • Integrated end milling optimization development
    • Ostafiev V.A., Globa A.V., and Globa L. Integrated end milling optimization development. Ann. CIRP 33 1 (1984) 29-32
    • (1984) Ann. CIRP , vol.33 , Issue.1 , pp. 29-32
    • Ostafiev, V.A.1    Globa, A.V.2    Globa, L.3
  • 77
    • 33847101140 scopus 로고    scopus 로고
    • R. Enparantza, Tool Selection and Cutting Conditions Optimization in Milling, Ph.D. Thesis, University of Manchester, United Kingdom, 1991.
  • 78
    • 33847162251 scopus 로고    scopus 로고
    • J. Wang, Constrainted Optimization of Rough Milling Operations, Ph.D. Thesis, The University of Melbourne, Australia, 1993.
  • 79
    • 0029287848 scopus 로고
    • Adaptive control optimization in end milling using neural networks
    • Chiang S.T., Liu D.I., Lee A.C., and Chieng W.H. Adaptive control optimization in end milling using neural networks. Int. J. Mach. Tools Manuf. 34 5 (1995) 637-660
    • (1995) Int. J. Mach. Tools Manuf. , vol.34 , Issue.5 , pp. 637-660
    • Chiang, S.T.1    Liu, D.I.2    Lee, A.C.3    Chieng, W.H.4
  • 80
    • 0030737081 scopus 로고    scopus 로고
    • On the optimization of machining parameters for milling operations
    • Tolouei-rad M., and Bidhendi I.M. On the optimization of machining parameters for milling operations. Int. J. Mach. Tools Manuf. 37 1 (1997) 1-16
    • (1997) Int. J. Mach. Tools Manuf. , vol.37 , Issue.1 , pp. 1-16
    • Tolouei-rad, M.1    Bidhendi, I.M.2
  • 81
    • 0033078455 scopus 로고    scopus 로고
    • Dynamic optimization of multi-pass milling operations via geometric programming
    • Sonmez A.I., Baykasoglu A., Dereli T., and Filiz I.H. Dynamic optimization of multi-pass milling operations via geometric programming. Int. J. Mach. Tools Manuf. 39 (1999) 297-320
    • (1999) Int. J. Mach. Tools Manuf. , vol.39 , pp. 297-320
    • Sonmez, A.I.1    Baykasoglu, A.2    Dereli, T.3    Filiz, I.H.4
  • 82
    • 0034668375 scopus 로고    scopus 로고
    • Optimization of machining conditions for multi-tool milling operations
    • Cakir M.C., and Gurarda A. Optimization of machining conditions for multi-tool milling operations. Int. J. Prod. Res. 38 15 (2000) 3537-3552
    • (2000) Int. J. Prod. Res. , vol.38 , Issue.15 , pp. 3537-3552
    • Cakir, M.C.1    Gurarda, A.2
  • 83
    • 0032074006 scopus 로고    scopus 로고
    • Computer-aided economic optimization of end-milling operations
    • Wang J. Computer-aided economic optimization of end-milling operations. Int. J. Prod. Econ. 54 (1998) 307-320
    • (1998) Int. J. Prod. Econ. , vol.54 , pp. 307-320
    • Wang, J.1
  • 84
    • 0034925852 scopus 로고    scopus 로고
    • Computer-aided optimization of multiple constraint single-pass face milling operations
    • Wang J., and Armarego E.J.A. Computer-aided optimization of multiple constraint single-pass face milling operations. Mach. Sci. Technol. 5 1 (2001) 77-99
    • (2001) Mach. Sci. Technol. , vol.5 , Issue.1 , pp. 77-99
    • Wang, J.1    Armarego, E.J.A.2
  • 85
    • 33847138320 scopus 로고    scopus 로고
    • X. Wang, A. Kardekar, I.S. Jawahir, Performance-based optimization of multi-pass face milling operations using genetic algorithms, Proceedings of the Seminar on Intell. Computations in Manufacturing Engineering, Naples, Italy, to be presented in June 2004.
  • 87
    • 0037773082 scopus 로고    scopus 로고
    • Towards integration of hybrid models for optimized machining performance in intelligent machining systems
    • Jawahir I.S., Balaji A.K., Rouch K.E., and Baker J.E. Towards integration of hybrid models for optimized machining performance in intelligent machining systems. J. Mater. Process. Technol. 139 1-3 (2003) 488-498
    • (2003) J. Mater. Process. Technol. , vol.139 , Issue.1-3 , pp. 488-498
    • Jawahir, I.S.1    Balaji, A.K.2    Rouch, K.E.3    Baker, J.E.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.