Size effects in materials due to microstructural and dimensional constraints: A comparative review

Acta Materialia

Volumn 46, Issue 16, 1998, Pages 5611-5626

  Arzt, E ^a  

^a MAX PLANCK INSTITUTE FOR INTELLIGENT SYSTEMS   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CREEP; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; MAGNETISM; MICROSTRUCTURE; MULTILAYERS; PARTICLES (PARTICULATE MATTER); PLASTICITY; STRESS ANALYSIS; THIN FILMS;

DIMENSIONAL CONSTRAINTS; MICROSTRUCTURAL CONSTRAINTS;

MATERIALS SCIENCE;

EID: 0032500424     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-6454(98)00231-6     Document Type: Review

References (62)

1. Underwood, E. E., Quantitative Stereology. Addison Wesley, Reading, Massachusetts, 1970.
2. Orowan, E., Symposium on Internal Stresses. Institute of Metals, London, 1947, p. 451.
3. Kocks, U. F., Can. J. Phys., 1967, 45, 737.
4. Labusch, R., J. appl. Phys., 1977, 48, 4550.
5. Ashby, M. F., Acta metall., 1966, 14, 679.
6. Brown, L. M. and Ham, R. K., in Strengthening Methods in Crystals, ed. A. Kelly and R. B. Nicholson. Elsevier, Amsterdam, 1971, p. 9.
7. Schröder, J. and Arzt, E., Scripta metall., 1985, 19, 1129.
8. Pollock, T. M. and Argon, A. S., Acta mater., 1992, 40, 1.
9. Nardone, V. C. and Tien, J. K., Scripta metall., 1983, 17, 467.
10. Srolovitz, D. J., Luton, M. J., Petkovic-Luton, R., Barnett, D. M. and Nix, W. D., Acta metall., 1984, 32, 1079.
11. Arzt, E. and Wilkinson, D. S., Acta metall., 1986, 34, 1893.
12. Rösler, J. and Arzt, E., Acta metall., 1990, 38, 671.
13. Behr, R., Mayer, J. and Arzt, E., Scripta mater., 1997, 36, 341.
14. Arzt, E. and Göhring, E., Scripta metall., 1993, 28, 843.
15. Arzt, E., Behr, R., Göhring, E., Grahle, P. and Mason, R. P., Mater. Sci. Engng, 1997, A234-236, 22.
16. Göhring, E., Ph.D. dissertation, Universität Stuttgart, 1997.
17. Arzt, E. and Göhring, Acta mater, in press.
18. Behr, R., Mayer, J. and Arzt, E., Intermetallics, in press.
19. Hall, E. O., Proc. R. Soc. Lond., 1951, B64, 474.
20. Petch, N. J., J. Iron Steel Inst., 1953, 174, 25.
21. Meyers, M. A. and Chawla, K. K., Mechanical Metallurgy. Prentice-Hall, Englewood Cliffs, New Jersey, 1984, p. 494.
22. Scattergood, R. O. and Koch, C. C., Scripta metall., 1992, 27, 1195.
23. Chokshi, A. H., Rosen, A., Karch, J. and Gleiter, H., Scripta metall., 1989, 23, 1679.
24. Nieh, T. G. and Wadsworth, J., Scripta metall., 1991, 25, 955.
25. Weertman, J. R., Mater. Sci. Engng, 1993, A166, 161.
26. Fougere, G. E., Weertman, J. R. and Siegel, R. W., Nanostruct. Mater., 1993, 3, 379.
27. Volpp, T., Göhring, E., Kuschke, W.-M. and Arzt, E., Nanostruct. Mater., 1998, 7, 855.
28. Karch, J., Birringer, R. and Gleiter, H., Nature, 1987, 330, 556.
29. Li, J. C. M., Trans. Am. Inst. Min. Engrs, 1963, 227, 239.
30. Nabarro, F. R. N., Bristol Conf. on Strength of Solids, 1948, p. 75.
31. Herring, C., J. appl. Phys., 1950, 21, 437.
32. Coble, R. L., J. appl. Phys., 1963, 34, 1679.
33. Wang, N., Wang, Z., Aust, K. T. and Erb, V., Acta mater., 1995, 43, 519.
34. Ashby, M. F., Scripta metall., 1969, 3, 837.
35. Arzt, E., Ashby, M. F. and Verall, R. A., Acta metall., 1983, 31, 1977.
36. Haasen, P., Mater. Sci. Engng, 1972, 9, 191.
37. Haasen, P., Contemp. Phys., 1977, 18, 373.
38. Kersten, M., Z. Phys., 1943, 44, 63.
39. Träuble, H., in Moderne Probleme der Metallphysik, Vol. II, ed. A. Seeger. Springer, Berlin, 1966, p. 157.
40. Adler, E. and Pfeiffer, H., I.E.E.E. Trans. Magn., 1974, 10, 172.
41. Herzer, G., Physica Scripta, 1993, T49, 307.
42. Alben, R., Becker, J. J. and Chi, M. C., J. appl. Phys., 1978, 49(3), 1653.
43. Herzer, G., I.E.E.E. Trans. Magn., 1990, 26, 1397.
44. Yoshizawa, Y., Oguma, S. and Yamauchi, K., J. appl. Phys., 1988, 64(10), 6044.
45. Mullins, W. W., Acta metall., 1958, 6, 414.
46. Thompson, C. V., A. Rev. Mater. Sci., 1990, 20, 245.
47. Nix, W. D., Metall. Trans., 1989, 20A, 2217.
48. Murakami, M., Kuan, T.-S. and Blech, I. A., Treatise on Materials Science and Technology, Vol. 24. Academic Press, New York, 1982, p. 164.
49. Freund, L. B., J. appl. Mech., 1987, 54, 553.
50. Venkatraman, R. and Bravman, J. C., J. Mater. Res., 1992, 7, 2040.
51. Thompson, C. V., J. Mater. Res., 1993, 8, 237.
52. Keller, R.-M., Baker, S. P. and Arzt, E., J. Mater. Res., 1998, 13, 1307.
53. Daniels, B. J., Ph.D. thesis, Stanford University, Department of Materials Science and Engineering, 1995.
54. Koehler, J. S., Phys. Rev. B, 1970, 2, 547.
55. Lehoczky, S. L., J. appl. Phys., 1978, 49, 5479.
56. Doerner, M. F., Ph.D. thesis, Stanford University, Department of Materials Science and Engineering, 1987.
57. Shinn, M., Hultman, L. and Barnett, S. A., J. Mater. Res., 1992, 7, 901.
58. Övecoglu, M. L., Doerner, M. F. and Nix, W. D., Acta metall., 1987, 35, 2947.
59. Hofbeck, R., Hausmann, K., Ilschner, B. and Künzi, H. U., Scripta metall., 1986, 20, 1601.
60. Judelewicz, M., Künzi, H. U., Merk, N. and Ilschner, B., Mater. Sci. Engng, 1994, A186, 135.
61. Petersen, K. E., Proc. IEEE, 1982, 70, 420.
62. Lin, H., Am. J. Phys., 1982, 50(1), 72.