Dental implant induced bone remodeling and associated algorithms

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 2, Issue 5, 2009, Pages 410-432

  Lin, Daniel ^a   Li, Qing ^a   Li, Wei ^a   Swain, Michael ^a  

^a UNIVERSITY OF SYDNEY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

BONE DENSITY; BONE REMODELING; DENTAL IMPLANTATIONS; DENTAL IMPLANTS; HUMAN BONES; IMPLANT DESIGN; LONG BONE; MATERIAL PROPERTY; MAXILLARY BONE; NEW DESIGN; POTENTIAL METHODS; RAPID DEVELOPMENT;

BIOMECHANICS; BONE; DENSITY (SPECIFIC GRAVITY); DESIGN; IMPLANTS (SURGICAL); MECHANICAL PROPERTIES; TRANSPLANTATION (SURGICAL);

DENTAL PROSTHESES;

ALGORITHM; BIOMECHANICS; BONE DENSITY; BONE REMODELING; BONE SCREW; CANCELLOUS BONE; CLINICAL ASSESSMENT; COMPARATIVE STUDY; COMPUTER ASSISTED TOMOGRAPHY; CONTROLLED STUDY; CORTICAL BONE; ENERGY YIELD; FINITE ELEMENT ANALYSIS; FOLLOW UP; GEOMETRY; HUMAN; LAW; LONG BONE; MANDIBLE; MASTICATION; MAXILLA; ORTHOPEDICS; PREDICTION; PRIORITY JOURNAL; REVIEW; STRESS; TOOTH IMPLANTATION; YOUNG MODULUS;

ALGORITHMS; ANIMALS; BONE REMODELING; DENTAL IMPLANTS; FINITE ELEMENT ANALYSIS; HUMANS; KINETICS; MODELS, BIOLOGICAL;

EID: 67349114167     PISSN: 17516161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2008.11.007     Document Type: Review

References (232)

1. AbuHammad O.A., Harrison A., and Watkinson A.C. The effect of properties of bone on the stress levels around a dental implant. An FEA study. Journal of Dental Research 75 5 (1996) 1167
2. Adachi T., Tomita Y., Sakaue H., and Tanaka M. Simulation of trabecular surface remodeling based on local stress nonuniformity. Japan Society Mechanical Engineering International Journal 40C 5 (1997) 782-792
3. Adams D.J., Spirt A.A., Brown T.D., Fritton S.P., Rubin C.T., and Brand R.A. Testing the daily stress stimulus theory of bone adaptation with natural and experimentally controlled strain histories. Journal of Biomechanics 30 7 (1997) 671-678
4. Akca K., and Cehreli M.C. Biomechanical consequences of progressive marginal bone loss around oral implants: A finite element stress analysis. Medical & Biological Engineering & Computing 44 7 (2006) 527-535
5. Al-Sukhun J., Lindqvist C., and Helenius M. Development of a three-dimensional finite element model of a human mandible containing endosseous dental implants. II. Variables affecting the predictive behavior of a finite element model of a human mandible. Journal Of Biomedical Materials Research Part A 80A (2007) 247-256
6. Alberktsson T., and Isidor F. Consensus Report of Session IV (Implant Dentistry) (1994), Quintessence, Chicago
7. Albrektsson T., Branemark P.I., Hansson H.A., and Lindstrom J. Osseointegrated Titanium implants-Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man. Acta Orthopaedica Scandinavica 52 2 (1981) 155-170
8. Alkan I., Sertgoz A., and Ekici E. Influence of occlusal forces on stress distribution in preloaded dental implant screws. Journal of Prosthetic Dentistry 91 4 (2004) 319-325
9. Andresen M., Mackie I., and Worthington H. The Periotest in traumatology. Part I. Does it have the properties necessary for use as a clinical device and can the measurements be interpreted?. Dental Traumatology 19 4 (2003) 214-217
10. Andresen M., Mackie I., and Worthington H. The Periotest in traumatology. Part II. The Periotest as a special test for assessing the periodontal status of teeth in children that have suffered trauma. Dental Traumatology 19 4 (2003) 218-220
11. Aranyarachkul P., Caruso J., Gantes B., Schulz E., Riggs M., Dus I., Yamada J.M., and Crigger M. Bone density assessments of dental implant sites: 2. Quantitative cone-beam computerized tomography. International Journal of Oral & Maxillofacial Implants 20 3 (2005) 416-424
12. Ashman R.B., Cowin S.C., Vanbuskirk W.C., and Rice J.C. A continuous wave technique for the measurement of the elastic properties of cortical bone. Journal of Biomechanics 17 5 (1984) 349-361
13. Ashman R.B., and Van Buskirk W.C. The elastic properties of a human mandible. Advances in Dental Research 1 (1987) 64-67
14. Bagge M. A model of bone adaptation as an optimization process. Journal of Biomechanics 33 11 (2000) 1349-1357
15. Baggi L., Cappelloni I., Maceri F., and Vairo G. Stress-based performance evaluation of osseointegrated dental implants by finite-element simulation. Simulation Modelling Practice and Theory 16 8 (2008) 971-987
16. Bargren J.H., Bassett C.A.L., and Gjelsvik A. Mechanical-properties of hydrated cortical bone. Journal of Biomechanics 7 3 (1974) 239-242
17. Bass S.L., and Triplett R.G. The effects of preoperative resorption and jaw anatomy on implant success. Clinical Oral Implant Research 2 (1991) 193-198
18. Beaupre G.S., Orr T.E., and Carter D.R. An approach for time-dependent bone modeling and remodeling- Theoretical development. Journal of Orthopaedic Research 8 5 (1990) 651-661
19. Bensoussan A., and Friedman A. Support of solution of a system of quasi-variational inequalities. Journal of Mathematical Analysis and Applications 65 3 (1978) 660-674
20. Block M.S., Kent J.N., and Kay J.F. Evaluation of hydroxylapatite-coated titanium dental implants in dogs. International Journal of Oral and Maxillofacial Surgery 45 7 (1987) 601-607
21. Bonfield W., and Grynpas M.D. Anisotropy of Youngs modulus of bone. Nature 270 5636 (1977) 453-454
22. Bourauel C., Vollmer D., and Jager A. Application of bone remodeling theories in the simulation of orthodontic tooth movements. Journal of Orofacial Orthopedics 61 (2000) 266-279
23. Bourrin S., Palle S., Pupier R., Vico L., and Alexandre C. Effects of physical-training on bone adaptation in 3 zones of the rat tibia. Journal of Bone and Mineral Research 10 11 (1995) 1745-1752
24. Bozkaya D., and Muftu S. Mechanics of the tapered interference fit in dental implants. Journal of Biomechanics 36 11 (2003) 1649-1658
25. Bozkaya D., Muftu S., and Muftu A. Evaluation of load transfer characteristics of five different implants in compact bone at different load levels by finite elements analysis. Journal of Prosthetic Dentistry 92 (2004) 523-530
26. Branemark P.I. An introduction to osseointegraion. Branemark (1985), Quintessence, Chicago
27. Branemark P.I. Osseointegration and its experimental background. Journal of Prosthetic Dentistry 50 3 (1983) 399-410
28. Burr D.B., Forwood M.R., Fyhrie D.P., Martin B., Schaffler M.B., and Turner C.H. Bone microdamage acid skeletal fragility in osteoporotic and stress fractures. Journal of Bone and Mineral Research 12 1 (1997) 6-15
29. Callan D.P., O'Mahony A., and Cobb C.M. Loss of crestal bone around dental implants: A retrospective study. Implant Dentisitry 7 (1998) 258-265
30. Carlsson G.E., and Harldsson T. Functional response. Branemark P-I (1985), Quintessence, Chicago
31. Carter D.R., Fyhrie D.P., and Whalen R.T. Trabecular bone-density and loading history-Regulation of connective-tissue biology by mechanical energy. Journal of Biomechanics 20 8 (1987) 785-&
32. Carter D.R., and Hayes W.C. The compressive behavior of bone as a two-phase porous structure. Journal of Bone and Joint Surgery 59 (1997) 954-962
33. Cattaneo P.M., Dalstra M., and Melsen B. The finite element method: a tool to study orthodontic tooth movement. Journal of Dental Research 84 5 (2005) 428-433
34. Cattaneo P.M., Dalstra M., and abd Melsen B. Analysis of stress and strain around orthodontically loaded implants: An animal study. International Journal of Oral & Maxillofacial Implants 22 2 (2007) 213-225
35. Chiapasco M. Early and immediate restorations and loading of implants in completely endentulous patients. Journal of Oral and Maxillofacial Implants 19 (2004) 76-91
36. Choi A.H., Conway R.C., and Ben-Nissan B. Finite element analysis of ceramic dental implants incorporated into the human mandible. Bioceramics 16 254-2 (2004) 707-710
37. Chou H.Y., Jagodnik J.J., and Muftu S. Predictions of bone remodeling around dental implant systems. Journal of Biomechanics 41 6 (2008) 1365-1373
38. Chun H.J., Cheong S.Y., Han J.H., Heo S.J., Chung J.P., Rhyu I.C., Choi Y.C., Baik H.K., Ku Y., and Kim M.H. Evaluation of design parameters of osseointegrated dental implants using finite element analysis. Journal of Oral Rehabilitation 29 6 (2002) 565-574
39. Cook S.D., Weinstein A.M., and Klawitter J.J. A 3-dimensional finite-element analysis of a porous rooted Co-Cr-Mo alloy dental implant. Journal of Dental Research 61 1 (1982) 25-29
40. Cordebois J., and Sidoroff F. Anisotropic damage in elasticity and plasticity. Journal De Mecanique Theorique Et Appliquee (1982) 45-60
41. Corn H., and Marks M.H. Basic Biological Concepts Associated with Adult Orthodontics (1989), Lea & Febiger, Philadelphia
42. Courteneyharris R.G., Kayser M.V., and Downes S. Comparison of the early production of extracellular-matrix on dense hydroxyapatite and hydroxyapatite-coated titanium in cell and organ-culture. Biomaterials 16 6 (1995) 489-495
43. Cowin S.C., and Hegedus D.H. Bone remodeling.1. theory of adaptive elasticity. Journal of Elasticity 6 3 (1976) 313-326
44. Crolet J.M., Aoubiza B., and Meunier A. Compact-bone-Numerical-simulation of mechanical characteristics. Journal of Biomechanics 26 6 (1993) 677-687
45. Crupi V., Guglielmino E., Rosa G.L., Sloten J.V., and Oosterwyck H.V. Numerical analysis of bone adaptation around an oral implant due to overload stress. Proceedings Institution of Mechanical Engineers Part H: Journal of Engineering Medicine (2004)
46. Cunningham W.P., Felton D.A., Bayne S.C., Kanoy B.E., and Miller C.T. Finite-element analysis comparing imz dental implant to mandibular cuspid. Journal of Dental Research 69 (1990) 116
47. Cuppone M., Seedhom B.B., Berry E., and Ostell A.E. The longitudinal Young's modulus of cortical bone in the midshaft of human femur and its correlation with CT scanning data. Calcified Tissue International 74 3 (2004) 302-309
48. Daculsi G., Legeros R.Z., and Deudon C. scanning and transmission electron-microscopy, and electron-probe analysis of the interface between implants and host bone -Osseo-coalescence versus osseointegration. Scanning Microscopy 4 2 (1990) 309-314
49. Davidson P.L., Milburn P.D., and Wilson B.D. Biological adaptive control model: A mechanical analogue of multi-factorial bone density adaptation. Journal of Theoretical Biology 227 2 (2004) 187-195
50. de Groot K., Geesink R., Klein C.P.A.T., and Serakian P. Plasma-sprayed coatings of hydroxyapatite. Journal of Biomedical Material Research 21 (1987) 1375-1381
51. Debruijn J.D., Flach J.S., Degroot K., Vanblitterswijk C.A., Davies J.E., Jones D.B., Doty S.B., Daculsi G., and Mckee M.D. Analysis of the bony interface with various types of hydroxyapatite in-vitro. Cells and Materials 3 2 (1993) 115-127
52. Dechow P.C., Nail G.A., Schwartzdabney C.L., and Ashman R.B. Elastic properties of human supraorbital and mandibular bone. American Journal of Physical Anthropology 90 3 (1993) 291-306
53. Degidi M., and Piattelli A. 7-year follow-up of 93 immediately loaded titanium dental implants. Journal of Oral Implantology 31 (2005) 25-31
54. delValle V., Faulkner G., Wolfaardt J., and Dent M. Craniofacial osseointegrated implant-induced strain distribution: A numerical study. International Journal of Oral & Maxillofacial Implants 12 2 (1997) 200-210
55. Dempster W.T., and Liddicoat R.T. Compact bone as a non-isotropic material. American Journal of Anatomy 91 3 (1952) 331-362
56. Deporter D.A., Watson P.A., Pilliar R.M., Melcher A.H., Winslow J., Howley T.P., Hansel P., Maniatopoulos C., Rodriguez A., Abdulla D., Parisien K., and Smith D.C. A histological assessment of the initial healing response adjacent to porous-surfaced, titanium-alloy dental implants in dogs. Journal of Dental Research 65 8 (1986) 1064-1070
57. Dincer B., Sinan M., and Ali M. Evaluation of load trqansfer characteristics of five different implants in compact bone at different load levels by finite element analysis. Journal of Prosthetic Dentistry 92 (2004) 523-530
58. Doblare M., Garcia J.M., and Cegonino J. Development of an internal bone remodeling theory and applications to some problems in orthopaedic biomechanics. Meccanica 37 4-5 (2002) 365-374
59. Eymard R., and Gallouet T. H-convergence and numerical schemes for elliptic problems. SIAM Journal on Numerical Analysis 41 2 (2003) 539-562
60. Field M., Q L., W L., and Swain M.V. Influence of tooth removal on mandibular bone response to mastication. Archives of Oral Biology 2104 (2008) 9
61. Fini M., Giavaresi G., Torricelli P., Borsari V., Giardino R., Nicolini A., and Carpi A. Osteoporosis and biomaterial osteointegration. Biomedicine & Pharmacotherapy 58 9 (2004) 487-493
62. Franchi M., Fini M., Giavaresi G., and Ottani V. Peri-implant osteogenesis in health and osteoporosis. Micron 36 (2005) 630-644
63. Frost H.M. Dynamics in Bone Remodeling in Bone Dynamics (1964), Little and Brown, Boston
64. Frost H.M. A determinant of bone architecture-The minimum effective strain. Clinical Orthopaedics and Related Research 175 (1983) 286-292
65. Frost H.M. Bone mass and the mechanostat-A proposal. Anatomical Record 219 1 (1987) 1-9
66. Frost H.M. Vital biomechanics-Proposed general concepts for skeletal adaptations to mechanical usage. Calcified Tissue International 42 3 (1988) 145-156
67. Frost H.M. Wolff law and bones structural adaptations to mechanical usage -An overview for clinician. Angle Orthodontist 64 3 (1994) 175-188
68. Frost H.M. Bone's mechanostat: A 2003 update. Anatomical Record Part a-Discoveries in Molecular Cellular and Evolutionary Biology 275A 2 (2003) 1081-1101
69. Froum S.J., Tarnow D.P., and Wallace S.S. Sinus floor elevation using anorganic bovine bone matrix (OsteoGraf/N) with and without autogenous bone: A clinical, histologic, radiographic and histomorphometric analysis-Part 2 of an ongoing study. International Journal of Periodontics and Restorative Dentistry. 18 (1998) 528
70. Fyhrie D.P., and Carter D.R. A unifying principle relating stress to trabecular bone morphology. Journal of Orthopaedic Research 4 3 (1986) 304-317
71. Fyhrie D.P., Carter D.R., and Schurman D.J. Effects of ingrowth, geometry, and material on stress transfer under porous-coated hip surface replacements. Journal of Orthopaedic Research 6 3 (1988) 425-433
72. Fyhrie D.P., and Schaffler M.B. The adaptation of bone apparent density to applied load. Journal of Biomechanics 28 2 (1995) 135-146
73. Gan L., and Pilliar R. Calcium phosphate sol-gel-derived thin films on porous-surfaced implants for enhanced osteoconductivity. Part I: Synthesis and characterization. Biomaterials 25 22 (2004) 5303-5312
74. Geng J.P., Tan K.B.C., and Liu G.R. Application of finite element analysis in implant dentistry: A review of the literature. Journal of Prosthetic Dentistry 85 6 (2001) 585-598
75. Genna F. On the effects of cyclic transversal forces on osseointegrated dental implants: Experimental and finite element shakedown analyses. Computer Methods in Biomechanics and Biomedical Engineering 6 2 (2003) 141-152
76. Gibson L.J., Ashby M.F., Schajer G.S., and Robertson C.I. The mechanics of two-dimensional cellular materials. Proceedings of the Royal Society of London Series a-Mathematical Physical and Engineering Sciences 382 1782 (1982) 25-42
77. Glauser R., Zembic A., Ruhstaller P., and Windisch S. Five-year results of implants with an oxidized surface placed predominantly in soft quality bone and subjected to immediate occlusal loading. Journal of Prosthetic Dentistry 97 6 (2007) S59-S68
78. Gotfredsen K., Berglundh T., and Lindhe F. Bone reactions adjacent to titanium implants subjected to static load of different duration. A study in the dog (III). Clinical Oral Implants Research 12 6 (2001) 552-558
79. Gotfredsen K., Berglundh T., and Lindhe J. Bone reactions adjacent to titanium implants subjected to static load-A study in the dog (I). Clinical Oral Implants Research 12 1 (2001) 1-8
80. Gotfredsen K., Berglundh T., and Lindhe J. Bone reactions adjacent to titanium implants subjected to static load. A study in the dog (I). Clin Oral implants Res. 12 (2001) 1-8
81. Gotfredsen K., Berglundh T., and Lindhe J. Bone reactions adjacent to titanium implants with different surface characteristics subjected to static load. A study in the dog (II). Clinical Oral Implants Research 12 3 (2001) 196-201
82. Goulet R.W., Goldstein S.A., Ciarelli M.J., Kuhn J.L., Brown M.B., and Feldkamp L.A. The relationship between the structural and orthogonal compressive properties of trabecular bone. Journal of Biomechanics 27 4 (1994) 375-389
83. Hansson S. A conical implant-abutment interface at the level of the marginal bone improves the distribution of stresses in the supporting bone: An axisymmetric finite element analysis. Clinical Oral Implant Research 14 (2003) 286-293
84. Hansson S., and Ekestubbe A. Area moments of inertia as a measure of the mandible stiffness of the implant patient. Clinical Oral Implants Research 15 4 (2004) 450-458
85. Hansson T., and Roos B. Microcalluses of the trabeculae in lumbar vertebrae and their relation to the bone-mineral content. Spine 6 4 (1981) 375-380
86. Harrigan T.P., and Hamilton J.J. An analytical and numerical study of the stability of bone remodeling theories-Dependence on microstructural stimulus. Journal of Biomechanics 25 5 (1992) 477-488
87. Hazelwood S.J., Martin R.B., Rashid M.M., and Rodrigo J.J. A mechanistic model for internal bone remodeling exhibits different dynamic responses in disuse and overload. Journal of Biomechanics 34 3 (2001) 299-308
88. Helgason B., Perilli E., Schileo E., Taddei F., Brynjolfsson S., and Viceconti M. Mathematical relationships between bone density and mechanical properties: A literature review. Clinical Biomechanics 23 2 (2008) 135-146
89. Helgason B., Viceconti M., Runarsson T.P., and Brynjolfsson S. On the mechanical stability of porous coated press fit titanium implants: A finite element study of a pushout test. Journal of Biomechanics 41 8 (2008) 1675-1681
90. Holmgren E.P., Seckinger R.J., and Kilgren L.M. Evaluating parameters of osseointegrated dental implants using finite element analysis. Journal of Dental Research 77 (1998) 245
91. Homolka P., Beer A., Birkfellner W., Nowotny R., Gahleitner A., Tschabitscher M., and Bergmann H. Bone mineral density measurement with dental quantitative CT prior to dental implant placement in cadaver mandibles: Pilot study. Radiology 224 1 (2002) 247-252
92. Hoshaw S.J., Brunski J.B., and Cochran G.V.B. Mechanical loading of Branemark implants affects interfacial bone modeling and remodeling. International Journal of Oral and Maxillofacial Implants 9 (1994) 345-360
93. Howard C.J., Hunter B.A., and Kim D.J. Oxygen position and bond lengths from lattice parameters in tetragonal zirconias. Journal of the American Ceramic Society 81 1 (1998) 241-243
94. Huang H.L., Chang C.H., Hsu J.T., and Fallgatter A.M. Comparison of implant body designs and threaded designs of dental implants: A 3-dimensional finite element analysis. International Journal Of Oral & Maxillofacial Implants 22 (2008) 551-562
95. Huang H.L., Chang C.H., Hsu J.T., Fallgatter A.M., and Ko C.C. Comparison of implant body designs and threaded designs of dental implants: A 3-dimensional finite element analysis. International Journal of Oral & Maxillofacial Implants 22 4 (2007) 551-562
96. Huang H.L., Hsu J.T., Fuh L.J., Tu M.G., Ko C.C., and Shen Y.W. Bone stress and interfacial sliding analysis of implant designs on an immediately loaded maxillary implant: A non-linear finite element study. Journal of Dentistry 36 6 (2008) 409-417
97. Huang H.M., Lee S.Y., Yeh C.Y., and Lin C.T. Resonance frequency assessment of dental implant stability with various bone qualities: A numerical approach. Clinical Oral Implants Research 13 1 (2002) 65-74
98. Huiskes R., Weinans H., Grootenboer H.J., Dalstra M., Fudala B., and Slooff T.J. Adaptive bone-remodeling theory applied to prosthetic-design analysis. Journal of Biomechanics 20 11-12 (1987) 1135-1150
99. Hurzeler M., Fickl S., Zuhr O., and Wachtel H.C. Peri-implant bone level around implants with platform-switched abutments: Preliminary data from a prospective study. Journal of Oral and Maxillofacial Surgery 65 7 (2007) 33-39
100. Huwiler M.A., Pjetursson B.E., Bosshardt D.D., Salvi G.E., and Lang N.P. Resonance frequency analysis in relation to jawbone characteristics and during early healing of implant installation. Clinical Oral Implants Research 18 3 (2007) 275-280
101. Hvid I., Bentzen S.M., Linde F., Mosekilde L., and Pongsoipetch B. X-ray Quantitative computed tomography: The relations to physical properties of proximal tibial trabecular bone specimens. Journal of Biomechanics 22 (1989) 837-844
102. Ichim I., Li Q., Li W., Kieser J., and Swain M. Modelling of Fracture Behaviour in Biomaterials, a leading opinion article. Biomaterials 28 (2007) 1317-1326
103. Isidor F. Influence of forces on peri-implant bone. Clinical Oral Implants Research 17 (2006) 8-18
104. Jacobs C.R., Simo J.C., Beaupre G.S., and Carter D.R. Adaptive bone remodeling incorporating simultaneous density and anisotropy considerations. Journal of Biomechanics 30 6 (1997) 603-613
105. Jaffin R.A., and Berman C.L. The excessive loss of branemark fixtures in type-iv bone-A 5-year analysis. Journal of Periodontology 62 1 (1991) 2-4
106. Jansen J.A., Vercaigne S., Hulshoff A.G., Corten F.G.A., ter Brugge P.J., and ~ N.I. The Effect of Surface Roughness and Calcium Phosphate Coating on Bone-Regenerative Implant Surfaces (2000), em squared Inc, Toronto, Canada
107. Jaquiery C., Rohner D., Kunz C., Bucher P., Peters F., Schenk R.K., and Hammer B. Reconstruction of maxillary and mandibular defects using prefabricated microvascular fibular grafts and osseointegrated dental implants-A prospective study. Clinical Oral Implants Research 15 5 (2004) 598-606
108. Jaworski Z.F.G., Liskovakiar M., and Uhthoff H.K. Effect of long-term immobilization on the pattern of bone loss in older dogs. Journal of Bone and Joint Surgery-British Volume 62 1 (1980) 104-110
109. Jones S., Faulkner G., Raboud D., Fyfe K., and Wolfaardt J. Simulation of impact test for determining health of percutaneous bone anchored implants. Journal of Biomechanical Engineering-Transactions of the Asme 128 5 (2006) 647-653
110. Kachanov L.M. Time of the rupture process under creep conditions. IVZAkad. Nauk S.S.R. Otd Tech Nauk 8 (1958) 26-31
111. Kaneps A.J., Stover S.M., and Lane N.E. Changes in canine cortical and cancellous bone mechanical properties following immobilization and remobilization with exercise. Bone 21 5 (1997) 419-423
112. Kanis J.A. Osteoporosis (1997), Blackwell Healthcare Communications Ltd, London
113. Kao H.C., Gung Y.W., Chung T.F., and Hsu M.L. The influence of abutment angulation on micromotion level for immediately loaded dental implants: A 3-D finite element analysis. International Journal of Oral & Maxillofacial Implants 23 4 (2008) 623-630
114. Kasemo B., and Lusmaa U. The Biomaterial-tissue Interface and its Analogues in Surface Science and Technology (1991), University of Toronto Press, Toronto, Buffalo
115. Katsamanis F., and Raftopoulos D.D. Determination of mechanical-properties of human femoral cortical bone by the hopkinson bar stress technique. Journal of Biomechanics 23 11 (1990) 1173-1184
116. Keaveny T.M., Wachtel E.F., Guo X.E., and Hayes W.C. Mechanical-behavior of damaged trabecular bone. Journal of Biomechanics 27 11 (1994) 1309-1318
117. Keaveny T.M., Wachtel E.F., and Kopperdahl D.L. Mechanical behavior of human trabecular bone after overloading. Journal of Orthopaedic Research 17 3 (1999) 346-353
118. Keller J.C., Young F.A., and Natiella J.R. Quantitative bone remodeling resulting from the use of porous dental implants. Journal of Biomedical Materials Research 21 3 (1987) 305-319
119. Keyak J.H., Lee I.Y., and Skinner H.B. Correlations between orthogonal mechanical-properties and density of trabecular bone-Use of different densitometric measures. Journal of Biomedical Materials Research 28 11 (1994) 1329-1336
120. Khraisat A., Hashimoto A., Nomura S., and Miyakawa O. Effect of lateral cyclic loading on abutment screw loosening of an external hexagon implant system. Journal of Prosthetic Dentistry 91 4 (2004) 326-334
121. Kitagawa T., Tanimoto Y., Odaki M., Nemoto K., and Aida M. Influence of implant/abutment joint designs on abutment screw loosening in a dental implant system. Journal of Biomedical Materials Research Part B-Applied Biomaterials 75B 2 (2005) 457-463
122. Kitamura E., Stegaroiu R., Nomura S., and Miyakawa O. Biomechanical aspects of marginal bone resorption around osseointegrated implants: Considerations based on a three-dimensional finite element analysis. Clinical Oral Implants Research 15 4 (2004) 401-412
123. Kitamura E., Stegaroiu R., Nomura S., and Miyakawa O. Influence of marginal bone resorption on stress around an implant-A three-dimensional finite element analysis. Journal of Oral Rehabilitation 32 4 (2005) 279-286
124. Kiuchi A., Arai Y., and Katsuta S. Detraining effects on bone mass in young male rats. International Journal of Sports Medicine 19 4 (1998) 245-249
125. Kopperdahl D.L., Pearlman J.L., and Keaveny T.M. Biomechanical consequences of an isolated overload on the human vertebral body. Journal of Orthopaedic Research 18 5 (2000) 685-690
126. Kozlovsky A., Tal H., Laufer B.Z., Leshem R., Rohrer M.D., Weinreb M., and Artzi Z. Impact of implant overloading on the peri-implant bone in inflamed and non-inflamed peri-implant mucosa. Clinical Oral Implants Research 18 5 (2007) 601-610
127. Krauthammer T. Accuracy of the finite-element method near a curved boundary. Computers & Structures 10 6 (1979) 921-929
128. Lagravere M.O., Fang Y., Toogood R.W., Packota G.V., and Major P.W. Density conversion factor determined using a cone-beam computed tomography unit NewTom QR-DVT 9000. Dentomaxillofacial Radiology 35 (2006) 407-409
129. Lee J.H., Frias V., Lee K.W., and Wright R.F. Effect of implant size and shape on implant success rates: A literature review. Journal of Prosthetic Dentistry 94 4 (2005) 377-381
130. Lee S.Y., Gantes B., Riggs M., and Crigger M. Bone density assessments of dental implant sites: 3. Bone quality evaluation during osteotomy and implant placement. International Journal of Oral & Maxillofacial Implants 22 (2008) 208-212
131. LeGeros R.Z. Biodegradation and bioresorption of calcium phosphate ceramics. Clinical Materials 14 (1993) 65-88
132. Lekholm U., and Zarb G.A. Tissue-integrated prostheses. Branemark PI (1985), Quintessence, Chicago
133. Lemaitre J. A continuous damage mechanics model for ductile fracture. Journal of Engineering Materials and Technology-Transactions of the Asme 107 1 (1985) 83-89
134. Lettry S., Seedhom B.B., Berry E., and Cuppone M. Quality assessment of the cortical bone of the human mandible. Bone 32 1 (2003) 35-44
135. Lezzi G., Degidi M., Scarano A., Petrone G., and Piattelli A. Anorganic bone matrix retrieved 14 years after a sinus augmentation procedure: A historic and histomorphometic evaluation. Journal of Periodontology 78 10 (2007) 2057-2061
136. Li I., Li H., Shi L., Fok A.S.L., Ucer C., Deulin H., Horner K., and Silikas N. A mathematical model for simulating the bone remodeling process under mechanical stimulus. Dental Materials 23 9 (2007) 1073-1078
137. Li W., Li Q., Loughran J., Swain M., Ichim I., and Fujisawa N. Contact-driven crack formation in dental ceramic materials. Key Engineering Materials 324-325 (2006) 1257-1260
138. Li W., Swain M.V., Li Q., Ironside J., and Steven G.P. Fibre reinforced composite dental bridge. Part II: Numerical investigation. Biomaterials 25 20 (2004) 4995-5001
139. Li W., Swain M.V., Li Q., and Steven G.P. Towards automated 3D finite element modeling of direct fiber reinforced composite dental bridge. Journal of Biomedical Materials Research Part B-Applied Biomaterials 74B 1 (2005) 520-528
140. Li X.J., Jee W.S.S., Chow S.Y., and Woodbury D.M. Adaptation of cancellous bone to aging and immobilization in the rat-A single photon-absorptiometry and histomorphometry study. Anatomical Record 227 1 (1990) 12-24
141. Liao S.H., Tong R.F., and Dong J.X. Influence of anisotropy on peri-implant stress and strain in complete mandible model from CT. Computerized Medical Imaging and Graphics 32 1 (2008) 53-60
142. Lin, D., Li, Qi, Li, W., Ichim, I., Swain, M., 2007. Evaluation of dental implant induced bone remodeling by using a 2D finite element model. In: Proceedings of 5th Australasian Congress on Applied Mechanics, Brisbane, Australia
143. Lindquist L.W., Rockler B., and Carlsson G.E. Bone-resorption around fixtures in edentulous patients treated with mandibular fixed tissue-integrated prostheses. Journal of Prosthetic Dentistry 59 1 (1988) 59-63
144. Linkow L.I., Rinaldi A.W., Weiss W.W., and Smith G.H. Factors influencing long-term implant success. Journal of Prosthetic Dentistry 63 1 (1990) 64-73
145. Liu X., and Niebur G.L. Bone ingrowth into a porous coated implant predicted by a mechano-regulatory tissue differentiation algorithm. Biomech Model Mechanobiol 7 (2008) 335-344
146. Lopes C.D., and Junior B.K. Histological findings of bone remodeling around smooth dental titanium implants inserted in rabbit's tibias. Annals of Anatomy-Anatomischer Anzeiger 184 4 (2002) 359-362
147. Lowet G., Dayuan X., and Van der Perre G. Study of the vibrational behaviors of a healing tibia using finite element modeling. Journal of Biomechanics 29 (1996) 1003-1010
148. Lowet G., Van Audekercke R., Van der Perre G., Geusens P., Dequeker J., and Lammens J. The relation between resonant frequencies and torsional stiffness of long bones in in vitro validation of a simple beam model. Journal of Biomechanics 26 (1993) 689-696
149. Machado G., and Trabucho L. Some results in topology optimization applied to biomechanics. Computers & Structures 82 17-19 (2004) 1389-1397
150. Maeda H., Kimmel D.B., Raab D.M., and Lane N.E. Musculoskeletal recovery following hindlimb immobilization in adult female rats. Bone 14 2 (1993) 153-159
151. Malvern L.E. Introduction to the Mechanics of a Continuous Medium (1969), Prentice-Hall, Englewood Cliffs, NJ
152. Martens M., Vanaudekercke R., Demeester P., and Mulier J.C. The geometrical properties of human femur and tibia and their importance for the mechanical-behavior of these bone structures. Archives of Orthopaedic and Trauma Surgery 98 2 (1981) 113-120
153. McLean, F.C., Urist, M.R., 1968. Bone. Chicago, Univ. Chicago
154. McNamara B.P., Taylor D., and Prendergast P.J. Computer prediction of adaptive bone remodeling around noncemented femoral prostheses: The relationship between damage-based and strain-based algorithms. Medical Engineering & Physics 19 5 (1997) 454-463
155. Mellal A., Wiskott H.W.A., Botsis J., Scherrer S.S., and Belser U.C. Stimulating effect of implant loading on surrounding bone-Comparison of three numerical models and validation by in vivo data. Clinical Oral Implants Research 15 2 (2004) 239-248
156. Menicucci G., Lorenzetti M., Pera P., and Preti G. Mandibular implant-retained overdenture: Finite element analysis of two anchorage systems. International Journal of Oral & Maxillofacial Implants 13 3 (1998) 369-376
157. Meredith N., Alleyne D., and Cawley P. Quantitative determination of the stability of the implant-tissue interface using resonance frequency analysis. Clinical Oral Implants Research 7 3 (1996) 261-267
158. Meredith N., Book K., Friberg B., Jemt T., and Sennerby L. Resonance frequency measurements of implant stability in vivo-A cross-sectional and longitudinal study of resonance frequency measurements on implants in the edentulous and partially dentate maxilla. Clinical Oral Implants Research 8 3 (1997) 226-233
159. Meyer U., Joos U., Mythili J., Stamm T., Hohoff A., Fillies T., Stratmann U., and Wiesmann H.P. Ultrastructural characterization of the implant/bone interface of immediately loaded dental implants. Biomaterials 25 10 (2004) 1959-1967
160. Mori S., and Burr D.B. Increased intracortical remodeling following fatigue damage. Bone 14 2 (1993) 103-109
161. Nagaraja S., Couse T.L., and Guldberg R.E. Trabecular bone microdamage and microstructural stresses under uniaxial compression. Journal of Biomechanics 38 4 (2005) 707-716
162. Natali A.N., Pavan P.G., Schileo E., and Williams K.R. A numerical approach to resonance frequency analysis for the investigation of oral implant osseointegration. Journal of Oral Rehabilitation 33 9 (2006) 674-681
163. Nowzari H., Chee W., Yi K., Pak M., Chung W.H., and Rich S. Scalloped dental implants: A retrospective analysis of radiographic and clinical outcomes of 17 NobelPerfect (TM) implants in 6 patients. Clinical Implant Dentistry and Related Research 8 1 (2006) 1-10
164. O'Mahony A.M., Williams J.L., Katz J.O., and Spencer P. Anisotropic elastic properties of cancellous bone from a human edentulous mandible. Clinical Oral Implants Research 11 5 (2000) 415-421
165. O'Mahony A.M., Williams J.L., and Spencer P. Anisotropic elasticity of cortical and cancellous bone in the posterior mandible increases peri-implant stress and strain under oblique loading. Clinical Oral Implants Research 12 6 (2001) 648-657
166. Ogiso M., Tabata T., Ichijo T., and Borgese D. Bone calcification on the hydroxyapatite dental implant and the bone-hydroxyapatite interface. Journal of Long-Term Effects of Medical Implants 2 2-3 (1992) 137-148
167. Orr T.E., Beaupre G.S., Carter D.R., and Schurman D.J. Computer predictions of bone remodeling around porous coated implants. Journal of Anthroplasty 5 (1990) 191-200
168. Park H.S., Lee Y.J., Jeong S.H., and Kwon T.G. Density of the alveolar and basal bones of the maxilla and the mandible. American Journal of Orthodontics and Dentofacial Orthopedics 133 1 (2008) 30-37
169. Perez M.A., Moreo P., Garcia-Aznar J.M., and Doblare M. Computational simulation of dental implant osseointegration through resonance frequency analysis. Journal of Biomechanics 41 2 (2008) 316-325
170. Petrie C.S., and Williams J.L. Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest-A three-dimensional finite-element analysis. Clinical Oral Implants Research 16 4 (2005) 486-494
171. Piattelli A. A histologic and histomorphometric study of bone reactions to unloaded and loaded non-submerged single implants in monkeys: A pilot study. Journal of Oral Implantology 19 (1993) 314-320
172. Pillar R.M. Porous surfaced metallic implants for orthopaedic applications. Journal of Biomedical Material Research: Applied Biomaterials 21 (1987) 1-33
173. Prendergast P.J., and Huiskes R. Microdamage and osteocyte-lacuna strain in bone: A microstructural finite element analysis. Journal of Biomechanical Engineering-Transactions of the Asme 118 2 (1996) 240-246
174. Prendergast P.J., and Taylor D. Prediction of bone adaptation using damage accumulation. Journal of Biomechanics 27 8 (1994) 1067-1076
175. Qin Y.X., Rubin C.T., and McLeod K.J. Nonlinear dependence of loading intensity and cycle number in the maintenance of bone mass and morphology. Journal of Orthopaedic Research 16 4 (1998) 482-489
176. Rangert B., Gunne J., and Sullivan D.Y. Mechanical aspect of Branemark implant connected to a natural tooth: An in vitro study. International Journal of Oral & Maxillofacial Implants 6 (1991) 177-186
177. Rapoff A.J., Rinaldi R.G., Hotzman J.L., and Daegling D.J. Elastic modulus variation in mandibular bone: A microindentation study of Macaca fascicularis. American Journal of Physical Anthropology 135 1 (2008) 100-109
178. Reina J.M., Garcia-Aznar J.M., Dominguez J., and Doblare M. Numerical estimation of bone density and elastic constants distribution in a human mandible. Journal of Biomechanics 40 4 (2007) 828-836
179. Rho J.Y., Hobatho M.C., and Ashman R.B. Relations of mechanical-properties to density and ct numbers in human bone. Medical Engineering & Physics 17 5 (1995) 347-355
180. Rice J.C., Cowin S.C., and Bowman J.A. On the dependence of the elasticity and strength of cancellous bone on apparent density. Journal of Biomechanics 21 2 (1988) 155-168
181. Robert G., and Marcus L. Restorative Dental Materials (1997), Mosby-Year Book inc
182. Roberts W.E., Simmons K.E., Garetto L.P., and DeCastro R.A. Bone physiology and metabolism in dental implantology: Risk factors for osteoporosis and other metabolic bone diseases. Implant Dentistry 1 (1992) 11-21
183. Romanos G.E. Present status of immediate loading of oral implants. Journal of Oral Implantology 30 (2004) 189-197
184. Sakaguchi R.L., and Borgersen S.E. Nonlinear contact analysis of preload in dental implant screws. International Journal of Oral & Maxillofacial Implants 10 (1995) 295-302
185. Senneby L., Ericson L.E., Thomsen P., Lekholm U., and Astrand P. Structure of the bone-titanium interface in retrieved clinical oral implants. Clinical Oral Implants Research 2 (1991) 103-111
186. Sennerby L., and Meredith N. Resonance frequency analysis: Measuring implant stability and osseointegration. Compendium 19 (1998) 493-502
187. Sennerby L., Thomsen P., and Ericson L.E. Early tissue-response to titanium implants inserted in rabbit cortical bone.1. light-microscopic observations. Journal of Materials Science-Materials in Medicine 4 3 (1993) 240-250
188. Shahlaie M., Gantes B., Schulz E., Riggs M., and Crigger M. Bone density assessments of dental implant sites: 1. Quantitative computed tomography. International Journal of Oral & Maxillofacial Implants 18 2 (2003) 224-231
189. Simmons C.A., Valiquette N., and Pillar R.M. Osseointegration of sintered porous-surfaced and plasma spray-coated implants: An animal model study of early postimplantation healing response and mechanical stability. The Journal of Biomedical Material Research 47 (1999) 122-138
190. Simunek A., Vokurkova J., Kopecka D., Celko M., Mounajjed R., Krulichova I., and Skrabkova Z. Evaluation of stability of titanium and hydroxyapatite-coated osseointegrated dental implants: A pilot study. Clinical Oral Implants Research 13 1 (2002) 75-79
191. Soballe K., Hansen E.S., Brockstedt-Rasmussen H., and Bunger C. The Effects of Osteoporosis, Bone Deficiency, Bone Grafting and Micromotion on Fixation of Porous-Coated Hydroxyapatite-Coated Implants (1993), Raven Press, New York
192. Stanford C.M., and Brand R.A. Toward an understanding of implant occlusion and strain adaptive bone modeling and remodeling. Journal of Prosthetic Dentistry 81 5 (1999) 553-561
193. Steflik D.E., Hanes P.J., Sisk A.L., Parr G.R., Song M.J., Lake F.T., and Mckinney R.V. Transmission electron-microscopic and high-voltage electron-microscopic observations of the bone and osteocyte activity adjacent to unloaded dental implants placed in dogs. Journal of Periodontology 63 5 (1992) 443-452
194. Stoppie N., Pattijn V., Van Cleynenbreugel T., Wevers M., Vander Sloten J., and Naert I. Structural and radiological parameters for the characterization of jawbone. Clinical Oral Implants Research 17 2 (2006) 124-133
195. Strid K.G. Radiographic results. Branemark (1985), Quintessence, Chicago
196. Szmuckler-Moncher S., Slama S., Reingewirtz Y., and Dubrille J. Timing of loading and effect of micro-motion on bone-implant interface: A review of experimental literature. The Journal of Biomedical Material Research 43 (1998) 193-203
197. Taber L.A. Biomechanics of growth, remodeling, and morphogenesis. Applied Mechanics Reviews 48 (1995) 487-545
198. Tabor Z. Estimating structural properties of trabecular bone from gray-level low-resolution images. Medical Engineering & Physics 29 1 (2007) 110-119
199. Taylor W.R., Roland E., Ploeg H., Hertig D., Klabunde R., Warner M.D., Hobatho M.C., Rakotomanana L., and Clift S.E. Determination of orthotropic bone elastic constants using FEA and modal analysis. Journal of Biomechanics 35 6 (2002) 767-773
200. Teixeira E.R., Sato Y., Akagawa Y., and Shindoi N. A comparative evaluation of mandibular finite element models with different lengths and elements for implant biomechanics. Journal of Oral Rehabilitation 25 4 (1998) 299-303
201. Tracy B.M., and Doremus R.H. Direct electron-microscopy studies of the bone-hydroxylapatite interface. Journal of Biomedical Materials Research 18 7 (1984) 719-726
202. Turkyilmaz I., and McGlumphy E.A. Is there a lower threshold value of bone density for early loading protocols of dental implants?. Journal of Oral Rehabilitation 35 10 (2008) 775-781
203. Turner C.H. Three rules for bone adaptation to mechanical stimuli. Bone 23 5 (1998) 399-407
204. Turner C.H., Anne V., and Pidaparti R.M.V. A uniform strain criterion for trabecular bone adaptation: Do continuum-level strain gradients drive adaptation?. Journal of Biomechanics 30 6 (1997) 555-563
205. Ulm C.W., Kneissel M., Hahn M., Solar P., Matejka M., and Donath K. Characteristics of the cancellous bone of edentulous mandibles. Clinical Oral Implants Research 8 2 (1997) 125-130
206. Vaillancourt H., Pilliar R.M., and Mccammond D. Finite-element analysis of crestal bone loss around porous-coated dental implants. Journal of Applied Biomaterials 6 4 (1995) 267-282
207. Valderrama P., Oates T.W., Jones A.A., Simpson J., Schoolfield J.D., and Cochran D.L. Evaluation of two different resonance frequency devices to detect implant stability: A clinical trial. Journal of Periodontology 78 2 (2007) 262-272
208. van Blitterswijk C.A., Brink V.D., Bovell Y.P., Leenders H., Flach J.S., DeBruijn J.D., and Radder A.M. In vitro assessment of bone/HA interactions: Effect of crystallinity. Transactions of the Society for Biomaterials 17 (1994) 432
209. Van Oosterwyck H., Duyck J., Vander Sloten J., Van der Perre G., De Cooman M., Lievens S., Puers R., and Naert I. The influence of bone mechanical properties and implant fixation upon bone loading around oral implants. Clinical Oral Implants Research 9 6 (1998) 407-418
210. Van Oosterwyck H., Vander Sloten J., Puers R., and Naert I. Finite element studies on the role of mechanical loading in bone response around oral implants. Meccanica 37 (2002) 441-451
211. Van Rietbergen B., Weinans H., Polman B.J., and Huiskes R. Computational strategies for iterative solution of large FEM applications employing voxel data. International Journal of Numerical Methods in Engineering 39 (1996) 2743-2767
212. van Staden R.C., Guan H., Johnson N.W., and Loo Y.C. Step-wise analysis of the dental implant insertion process using the finite element technique. Clinical Oral IMplant Research 19 (2008) 303-313
213. Vanrietbergen B., Huiskes R., Weinans H., Sumner D.R., Turner T.M., and Galante J.O. The mechanism of bone remodeling and resorption around press-fitted tha stems. Journal of Biomechanics 26 4-5 (1993) 369-382
214. Verna C., Melsen B., and Melsen F. Differences in static cortical bone remodeling parameters in human mandible and iliac crest. Bone 25 5 (1999) 577-583
215. Vico L., Lafage-Proust M.H., and Alexandre C. Effects of gravitational changes on the bone system in vitro and in vivo. Bone 22 5 (1998) 95s-100s
216. Wadamoto M., Akagawa Y., Sato Y., and Kubo T. The three-dimensional bone interface of an osseointegrated implant.1. A morphometric evaluation in initial healing. Journal of Prosthetic Dentistry 76 2 (1996) 170-175
217. Wang Z.L., Teo J.C.M., Chui C.K., Ong S.H., Yan C.H., Wang S.C., Wong H.K., and Teoh S.H. Computational biomechanical modeling of the lumbar spine using marching-cubes surface smoothened finite element voxel meshing. Computer Methods and Programs in Biomedicine 80 1 (2005) 25-35
218. Wehrbein H., and Diedrich P. Endosseous titanium implant during and after orthodontic load-and experimental study in the dog. Clinical Oral Implant Research 4 (1993) 76-82
219. Weinans H., Huiskes R., and Grootenboer H.J. Numerical comparisons of strain-adaptive bone-remodeling theories. Abstracts of the First World Congress of Biomechanics (1990)
220. Weinans H., Huiskes R., and Grootenboer H.J. The behavior of adaptive bone-remodeling simulation-models. Journal of Biomechanics 25 12 (1992) 1425-1441
221. Weinans H., Huiskes R., and Grootenboer H.J. Effects of material properties of femoral hip components on bone remodeling. Journal of Orthopaedic Research 10 6 (1992) 845-853
222. Weinlaender M., Kenney E.B., Lekovic V., Beumer J.r., Moy P.K., and Lewis S. Histomorphometry of bone apposition around three types of endosseous dental implants. International Journal of Oral & Maxillofacial Implants 7 (1992) 491-496
223. Wetzel A.C., Stich H., and Caffesse R.G. Bone apposition onto oral implants in the sinus area filled with different grafting materials - a histological study in beagle dogs. Clinical Oral Implants Research 6 3 (1995) 155-163
224. Whalen R.T., Carter D.R., and Steele C.R. Influence of physical-activity on the regulation of bone-density. Journal of Biomechanics 21 10 (1988) 825-837
225. Winter W., Heckmann S.M., and Weber H.P. A time-dependent healing function for immediate loaded implants. Journal of Biomechanics 37 12 (2004) 1861-1867
226. Wolff J. The Law of Bone Remodeling (1892), Verlag von August Hirchwald, Berlin
227. Wong F.Y., Pal S., and Saha S. The assessment of invivo bone condition in humans by impact response measurement. Journal of Biomechanics 16 10 (1983) 849-856
228. Wovern N.V., and Stolze K. Sex and age differences in bone morphology of mandibles. Scandinavian Journal of Dental Research 86 (1978) 478-485
229. Young F.A., Williams K.R., Draughn R., and Strohaver R. Design of prosthetic cantilever bridgework supported by osseointegrated implants using the finite element method. Dental Materials 14 1 (1998) 37-43
230. Zard G.A., and Schmitt A. Implant prosthodontic treatment options for the endentulous patient. Journal of Oral Rehabilitation 22 (1995) 661-671
231. Zhou X., Zhao Z., Zhao M., and Fan Y. The boundary design of mandibular model by means of the three-dimensional finite element method. West China J Stomatol 17 (1999) 1-6
232. Zysset P.K., and Curnier A. A 3D damage model for trabecular bone based on fabric tensors. Journal of Biomechanics 29 12 (1996) 1549-1558