Stress-based performance evaluation of osseointegrated dental implants by finite-element simulation

Simulation Modelling Practice and Theory

Volumn 16, Issue 8, 2008, Pages 971-987

  Baggi, Luigi ^a   Cappelloni, Ilaria ^a   Maceri, Franco ^a   Vairo, Giuseppe ^a  

^a UNIVERSITY OF ROME TOR VERGATA   (Italy)

Author keywords

3D finite element simulation; Dental biomechanics; Osseointegrated dental implants; Platform switching influence; Trabecular bone quality influence

Indexed keywords

BIOMECHANICS; BONE; CONVERGENCE OF NUMERICAL METHODS; DIAGNOSTIC RADIOGRAPHY; FINITE ELEMENT METHOD; IMAGING TECHNIQUES; MECHANICAL PROPERTIES; MEDICAL IMAGING; NUMERICAL METHODS; PARAMETRIC DEVICES; REPAIR; RESTORATION; RISK ASSESSMENT; STRESS CONCENTRATION; STRESSES; THREE DIMENSIONAL; THREE DIMENSIONAL COMPUTER GRAPHICS; TOMOGRAPHY;

3D FINITE-ELEMENT SIMULATION; BONE LOSS; COMPUTER TOMOGRAPHY IMAGES; CONVERGENCE ANALYSIS; DENTAL BIOMECHANICS; ENDOSSEOUS IMPLANTS; FINITE ELEMENTS; FINITE-ELEMENT SIMULATIONS; GEOMETRICAL PARAMETERS; IMPLANT DEVICES; NUMERICAL MODELLING; OPTIMAL CHOICE; OSSEOINTEGRATED DENTAL IMPLANTS; PARAMETRIC ALGORITHMS; PERFORMANCE EVALUATION; PLATFORM SWITCHING INFLUENCE; REAL DEVICES; RISK INDICATORS; SHAPE PARAMETERS; STRESS DISTRIBUTIONS; TRABECULAR BONE QUALITY INFLUENCE;

DENTAL PROSTHESES;

EID: 49549102188     PISSN: 1569190X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.simpat.2008.05.009     Document Type: Article

References (59)

1. Arkça K., and İplikçioǧlu H. Comparative evaluation of the effect of diameter, length and number of implants supporting three-unit fixed partial prostheses on stress distribution in bone. J. Dent. 30 (2002) 40-46
2. Asmussen E., Peutzfeldt A., and Sahafi A. Finite element analysis of stresses in endodontically treated, dowel-restored teeth. J. Prosthet. Dent. 94 (2005) 321-329
3. Ausiello P., Apicella A., and Davidson C.L. Effect of adhesive layer properties on stress distribution in composite restorations: a 3D finite element analysis. Dent. Mater. 18 (2002) 295-303
4. Becker C.M., and Kaiser D.A. Implant-retained cantilever fixed prosthesis: where and when. J. Prosthet. Dent. 84 (2000) 432-435
5. Bozkaya D., Muftu S., and Muftu A. Evaluation of load transfer characteristics of five different implants in compact bone at different load levels by finite elements analysis. J. Prosthet. Dent. 92 (2004) 523-530
6. Brunski J.B. Biomechanics of dental implants. In: Block M., Kent J.N., and Guerra L.R. (Eds). Implants in Dentistry (1997), W.B. Saunders, Philadelphia 63-71
7. Callan D.P., O' Mahony A., and Cobb C.M. Loss of crestal bone around dental implants: a retrospective study. Implant Dent. 7 (1998) 258-266
8. Carter D.R., Van Der Meulen M.C., and Beaupre G.S. Mechanical factors in bone growth and development. Bone 18 (1996) S5-S10
9. Chen F., Terada K., Hanada K., and Saito I. Anchorage effects of a palatal osseointegrated implant with different fixation: a finite element study. Angle Orthod. 75 (2005) 593-601
10. Chun H.J., Cheong S.Y., Han J.H., Heo S.J., Chung J.P., Rhyu I.C., et al. Evaluation of design parameters of osseointegrated dental implants using finite element analysis. J. Oral Rehabil. 29 (2002) 565-574
11. Chun H.J., Park D.N., Han C.H., Heo S.J., Heo M.S., and Koak J.Y. Stress distributions in maxillary bone surrounding dental implants with different overdenture attachments. J. Oral Rehabil. 32 (2005) 193-205
12. Chun H.J., Shin H.S., Han C.H., and Lee S.H. Influence of implant abutment type on stress distribution in bone under various loading conditions using finite element analysis. Int. J. Oral Maxillofac. Implants 21 (2006) 195-202
13. Chun-Li L., Yu-Chan K., and Ting-Sheng L. Effects of dental implant length and bone quality on biomechanical responses in bone around implants: a 3D non-linear finite element analysis. Biomed. Eng. Appl. Basis Comm. 17 (2005) 44-49
14. Cochran D.L. A comparison of endosseous dental implant surfaces. J. Periodontol. 70 (1999) 1523-1539
15. Cowin S.C. Bone Mechanics Handbook (2001), CRC Press, Boca Raton
16. Dalstra M., Cattaneo P.M., and Melsen B. Load transfer of miniscrews for orthodontic anchorage. Orthodontics 1 (2004) 53-62
17. Drago C.J. Rates of osseointegration of dental implants with regard to anatomic locations. J. Prosthodont. 1 (1992) 29-31
18. Eckert S.E., and Wollan P.C. Retrospective review of 1170 endosseous implants placed in partially edentulous jaws. J. Prosthet. Dent. 79 (1998) 415-421
19. Gardner D.M. Platform switching as a means to achieving implant aesthetics. N.Y. State Dent. J. 71 (2005) 34-37
20. Geng I.P., Tan K.B., and Liu G.R. Application of finite element analysis in implant dentistry: a review of the literature. J. Prosthet. Dent. 85 (2001) 585-598
21. Hermann F., Lerner H., and Palti A. Factors influencing the preservation of the periimplant marginal bone. Implant Dent. 16 (2007) 165-175
22. Hermann J.S., Schoolfield J.D., Schenk R.K., Buser D., and Cochran D.L. Influence of the size of the microgap on crestal bone changes around titanium implants. A histometric evaluation of unloaded non-submerged implants in the canine mandible. J. Periodontol. 72 (2001) 1372-1383
23. Himmlová L., Dostálová T., Kácovský A., and Konvičková S. Influence of implant length and diameter on stress distribution: a finite element analysis. J. Prosthet. Dent. 91 (2004) 20-25
24. Holmgren E.P., Seckinger R.J., Kilgren L.M., and Mante F. Evaluating parameters of osseointegrated dental implants using finite element analysis - a two dimensional comparative study examining the effects of implant diameter, implant shape, and load direction. J. Oral. Implantol. 24 (1998) 80-88
25. Huang H.L., Huang J.S., Ko C.C., Hsu J.T., Chang C.H., and Chen M.Y.C. Effect of splinted prosthesis supported a wide implant or two implants: a three-dimensional finite element analysis. Clin. Oral Implants Res. 16 (2005) 466-472
26. Ibrahim A., Atilla S., and Ḃlent E. Influence of occlusal forces on stress distribution in preloaded dental implant screws. J. Prosthet. Dent. 91 (2004) 319-325
27. Irving J.T. Factors concerning bone loss associated with periodontal disease. J. Dent. Res. 49 (1970) 262-267
28. Jemt T., Chai J., Harnett J., Heath M.R., Hutton J.E., Johns R.B., et al. A 5-year prospective multicenter follow-up report on overdentures supported by osseointegrated implants. Int. J. Oral Maxillofac. Implants 11 (1996) 291-298
29. Joshi S., Mukherjee A., Kheur M., and Metha A. Mechanical performance of endodontically treated teeth. Finite Elem. Anal. Des. 37 (2001) 587-601
30. Kitagawa T., Tanimoto Y., Nemoto K., and Aida M. Influence of cortical bone quality on stress distribution in bone around dental implant. Dent. Mater. J. 24 (2005) 219-224
31. Kyung H.M., Park H.S., Bae S.M., Sung J.H., and Kim I.B. Development of orthodontic micro-implants for intraoral anchorage. J. Clin. Orthod. 37 (2003) 321-328
32. Lazzara R.J., and Porter S.S. Platform switching: a new concept in implant dentistry for controlling postrestorative crestal bone levels. Int. J. Periodontics Restorative Dent. 26 (2006) 9-17
33. Lekholm U., Gunne J., Henry P., Higuchi K., Linden U., Bergstrom C., et al. Survival of the Branemark implant in partially edentulous jaws: a 10-year prospective multicenter study. Int. J. Oral Maxillofac. Implants 14 (1999) 639-645
34. Lekholm U., and Zarb G.A. Patient selection and preparation. In: Branemark P.I., Zarb G.A., and Albrektsson T. (Eds). Tissue-Integrated Prostheses: Osseointegration in Clinical Dentistry (1985), Quintessence, Chicago 199-209
35. Lemon J.E., and Dietsh-Misch F. Biomaterials for dental implants. In: Misch C.E. (Ed). Contemporary Implant Dentistry. second ed. (1999), Mosby, St. Louis 271-302
36. Maceri F., Martignoni M., and Vairo G. Mechanical behaviour of endodontic restorations with multiple prefabricated posts: a finite element approach. J. Biomech. 40 (2007) 2386-2398
37. Maeda Y., Miura J., Taki I., and Sogo M. Biomechanical analysis on platform switching: is there any biomechanical rationale?. Clin. Oral Implants Res. 18 (2007) 581-584
38. Mah J., and Bergstrand F. Temporary anchorage devices: a status report. J. Clin. Orthod. 39 (2005) 132-136
39. Martin R.B., Burr D.B., and Sharkey N.A. Skeletal Tissue Mechanics (1998), Springer, New York
40. Misch C.E., and Bidez M.W. A scientific rationale for dental implant design. In: Misch C.E. (Ed). Contemporary Implant Dentistry. second ed. (1999), Mosby, St. Louis 329-343
41. Natali A.N., Hart R.T., Pavan P.G., and Knets I. Mechanics of bone tissue. In: Natali A.N. (Ed). Dental Biomechanics (2003), Taylor & Francis, London 1-19
42. Natali A.N., and Pavan P.G. Numerical approach to dental biomechanics. In: Natali A.N. (Ed). Dental Biomechanics (2003), Taylor & Francis, London 211-239
43. Natali A.N., and Pavan P.G. A comparative analysis based on different strength criteria for evaluation of risk factor for dental implants. Comput. Methods Biomech. Biomed. Eng. 5 (2002) 511-523
44. Natali A.N., Pavan P.G., and Ruggero A.L. Evaluation of stress induced in peri-implant bone tissue by misfit in multi-implant prosthesis. Dent. Mater. 22 (2006) 388-395
45. Papadopoulos M.A., and Tarawneh F. The use of miniscrew implants for temporary skeletal anchorage in orthodontics: a comprehensive review. Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 103 (2007) e6-e15
46. Petrie C.S., and Williams J.L. Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest. A three-dimensional finite-element analysis. Clin. Oral Implants Res. 16 (2005) 486-494
47. Piattelli A., Scarano A., and Piattelli M. Microscopical aspects of failure in osseointegrated dental implants: a report of five cases. Biomaterials 17 (1996) 1235-1241
48. Rho J.Y., Ashman R.B., and Turner C.H. Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. J. Biomech. 26 (1993) 111-119
49. Roos-Jansåker A.M., Lindahl C., Renvert H., and Renvert S. Nine- to fourteen-year follow-up of implant treatment. Part I: implant loss and associations to various factors. J. Clin. Periodontol. 33 (2006) 283-289
50. Saab X.E., Griggs J.A., Powers J.M., and Engelmeier R.L. Effect of abutment angulation on the strain on the bone around an implant in the anterior maxilla: a finite element study. J. Prosthet. Dent. 97 (2007) 85-92
51. Sawako Y., Noriyuki W., Makoto S., and Takashi O. The influence of implant location and length on stress distribution for three-unit implant-supported posterior cantilever fixed partial dentures. J. Prosthet. Dent. 91 (2004) 234-240
52. Shin Y.K., Han C.H., Heo S.J., Kim S., and Chun H.J. Radiographic evaluation of marginal bone level around implants with different neck designs after 1 year. Int. J. Oral Maxillofac. Implants 21 (2006) 789-794
53. Tonetti M.S. Determination of the success and failure of root-form osseointegrated dental implants. Adv. Dent. Res. 13 (1999) 173-180
54. Truesdell C., and Toupin R.A. The classical field theories. In: Flügge S. (Ed). Handbuch der physik vol. III/1 (1960), Springer, Berlin
55. G. Vairo, Modellazione geometrica di interventi odontoiatrici per la simulazione del comportamento meccanico di denti curati (in Italian), in: Proc. ISCS National Meeting 2003, Cuen, Napoli, 2005, pp. 177-186.
56. Van Staden R.C., Guan H., and Loo Y.C. Application of the finite element method in dental implant research. Comput. Methods Biomech. Biomed. Eng. 9 (2006) 257-270
57. Weyant R.J. Short-term clinical success of root-form titanium implant systems. J. Evid. Based Dent. Pract. 3 (2003) 127-130
58. Zienkiewicz O.C., and Taylor R.L. The Finite Element Method. fourth ed. (1998), McGraw-Hill, New York
59. Zienkiewicz O.C., and Zhu J.Z. A simple error estimator and adaptive procedure for practical engineering analysis. Int. J. Numer. Method Eng. 24 (1987) 337-357