Numerical study of thermal and hydraulic performance of compound heat sink

Numerical Heat Transfer; Part A: Applications

Volumn 55, Issue 5, 2009, Pages 432-447

  Yang, Yue Tzu ^a   Peng, Huan Sen ^a  

^a NATIONAL CHENG KUNG UNIVERSITY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

FINS (HEAT EXCHANGE); FLOW SIMULATION; TURBULENCE; TURBULENCE MODELS;

FINITE-DIFFERENCE METHODS; FLOW AND HEAT TRANSFERS; GOVERNING EQUATIONS; HYDRAULIC PERFORMANCE; MOMENTUM EQUATIONS; NON-UNIFORM; NUMERICAL SIMULATIONS; NUMERICAL STUDIES; PLATE FINS; PLATE-FIN HEAT SINKS; POWER LAWS; SIMPLEC ALGORITHMS; STAGGERED GRIDS; TURBULENT STRUCTURES;

PLATES (STRUCTURAL COMPONENTS);

EID: 62349122123     PISSN: 10407782     EISSN: 15210634     Source Type: Journal    
DOI: 10.1080/10407780902776405     Document Type: Article

References (44)

1. Y. M. Chung and K. H. Luo, Unsteady Heat Transfer Analysis of an Impinging Jet, J. Heat Transfer, vol. 124, pp. 1039-1048, 2002.
2. K. Nishino, M. Samada, K. Kasuya, and K. Torii, Turbulence Statistics in the Stagnation Region of an Axisymmetric Impinging Jet Flow, Int. J. Heat Fluid Flow, vol. 17, pp. 193-201, 1996.
3. K. S. Kim, M. H. Won, J. W. Kim, and B. J. Back, Heat Pipe Cooling Technology for Desktop PC CPU, Appl. Therm. Eng., vol. 23, pp. 1137-1144, 2003.
4. Y. Wang and K. Vafai, An Experimental Investigation of the Thermal Performance of an Asymmetrical Flat Plate Heat Pipe, Int. J. Heat Mass Transfer, vol. 43, pp. 2657-2668, 2000.
5. Z. Zhao and C. T. Avedisian, Enhancing Forced Air Convection Heat Transfer from an Array of Parallel Plate Fins Using a Heat Pipe, Int. J. Heat Mass Transfer, vol. 40, no. 13, pp. 3135-3147, 1997.
6. D. Niculin, M. Strelets, A. Dvinsky, and A. Bar-Cohen, Navier-Stokes Study of Natural Convection and Heat Transfer in Vertical Symmetrically Heated Plate-Fin Heat Sinks, Numer. Heat Transfer A, vol. 30, no. 7, pp. 703-720, 1996.
7. G. Ledezma, A. M. Morega, and A. Bejan, Optimal Spacing between Pin Fins with Impinging Flow, J. of Heat Transfer, vol. 118, pp. 570-577, 1996.
8. L. A. Brignoni and S. V. Garimella, Experimental Optimization of Confined Air Jet Impingement on a Pin Fin Heat Sink, IEEE Trans. Compon. Packaging Technol., vol. 22, no. 3, pp. 399-404, 1999.
9. J. G. Maveety and J. F. Hendricks, A Heat Sink Performance Study Considering Material, Geometry, Reynolds Number with Air Impingement, J. Electron. Packag., vol. 121, pp. 156-161, 1999.
10. J. G. Maveety and H. H. Jung, Design of an Optimal Pin-Fin Heat Sink with Air Impingement Cooling, Int. Commun. Heat Mass Transfer, vol. 27, no. 2, pp. 229-240, 2000.
11. H. Jonsson and B. Palm, Thermal and Hydraulic Behavior of Plate Fin and Strip Fin Heat Sinks under Varying Bypass Conditions, IEEE Trans. Compon. Packaging Technol., vol. 23, no. 1, pp. 47-54, 2000.
12. H. Jonsson and B. Moshfegh, Modeling of the Thermal and Hydraulic Performance of Plate Fin, Strip Fin, and Pin Fin Heat Sinks-Influence of Flow Bypass, IEEE Trans. Compon. Packaging Technol., vol. 24, no. 2, pp. 142-149, 2001.
13. H. Wee, Q. Zhang, P. M. Ligrani, and S. Narasimhan, Numerical Predictions of Heat Transfer and Flow Characteristics of Heat Sinks with Ribbed and Dimpled Surfaces in Laminar Flow, Numer. Heat Transfer A, vol. 53, no. 11, pp. 1156-1175, 2008.
14. J. J. Hwang and C. C. Lui, Detailed Heat Transfer Characteristic Comparison in Straight and 90° Turned Trapezoidal Ducts with Pin-Fin Arrays, Int. J. Heat Mass Transfer, vol. 42, pp. 4005-4016, 1999.
15. J. J. Hwang and C. C. Lui, Measurement of End Wall Heat Transfer and Pressure Drop in a Pin-Fin Wedge Duct, Int. J. Heat Mass Transfer, vol. 45, pp. 877-889, 2002.
16. A. Horvat and I. Catton, Application of Galerkin Method to Conjugate Heat Transfer Calculation, Numer. Heat Transfer B, vol. 44, no. 6, pp. 509-531, 2003.
17. K. Park, D.-H. Choi, and K.-S. Lee, Numerical Shape Optimization for High Performance of a Heat Sink with Pin-Fins, Numer. Heat Transfer A, vol. 46, no. 9, pp. 909-927, 2004.
18. E. Sansoucy, P. H. Oosthuizen, and G. R. Ahmed, An Experimental Study of the Enhancement of Air-Cooling Limits for Telecom=Datacom Heat Sink Applications Using an Impinging Air Jet, J. Electron. Packag., vol. 128, pp. 166-171, 2006.
19. K. T. Chiang and F. P. Chang, Application of Response Surface Methodology in the Parametric Optimization of a Pin-Fin Type Heat Sink, Int. Commun. Heat Mass Transfer, vol. 33, pp. 836-845, 2006.
20. K. T. Chiang, F. P. Chang, and T. C. Tsai, Optimum Design Parameters of Pin-Fin Heat Sink Using the Grey-Fuzzy Logic Based on the Orthogonal Arrays, Int. Commun. Heat Mass Transfer, vol. 33, pp. 744-752, 2006.
21. H. Y. Li, S. M Chao, and G. L. Tsai, Thermal Performance Measurement of Heat Sinks with Confined Impinging Jet by Infrared Thermography, Int. J. Heat Mass Transfer, vol. 48, pp. 5386-5394, 2005.
22. H. Y. Li and K. Y. Chen, Thermal Performance of Plate-Fin Heat Sinks under Confined Impinging Jet Conditions, Int. J. Heat Mass Transfer, vol. 50, pp. 1963-1970, 2007.
23. K. K. Ambatipudi and M. M. Rahman, Analysis of Conjugate Heat Transfer in Micro-channel Heat Sinks, Numer. Heat Transfer A, vol. 37, no. 7, pp. 711-731, 2000.
24. E. Y. K. Ng and S. T. Poh, CFD Analysis of Double-Layer Microchannel Conjugate Parallel Liquid Flows with Electric Double-Layer Effects, Numer. Heat Transfer A, vol. 40, no. 7, pp. 735-749, 2001.
25. C. J. Kobus and T. Oshio, Development of a Theoretical Model for Predicting the Thermal Performance Characteristics of a Vertical Pin-fin Array Heat Sink under Combined Forced and Natural Convection, Int. J. Heat Mass Transfer, vol. 48, pp. 1053-1063, 2005.
26. P. Payvar, Free Convection in a Vertical Duct of Square Cross Section with Variable Viscosity, Numer. Heat Transfer A, vol. 23, no. 2, pp. 247-258, 1993.
27. C. J. Kobus and T. Oshio, Predicting the Thermal Performance Characteristics of Staggered Vertical Pin Fin Array Heat Sinks under Combined Mode Radiation and Mixed Convection with Impinging Flow, Int. J. Heat Mass Transfer, vol. 48, pp. 2684-2696, 2005.
28. G. P. Peterson and C. S. Chang, Heat Transfer Analysis and Evaluation for Two-Phase Flow in Porous-Channel Heat Sinks, Numer. Heat Transfer A, vol. 31, no. 2, pp. 113-130, 1997.
29. M. Tye-Gingras and L. Gosselin, Thermal Resistance Minimization of a Fin-and-Porous-Medium Heat Sink with Evolutionary Algorithms, Numer. Heat Transfer A, vol. 54, no. 4, pp. 349-366, 2008.
30. W.-L. Chen and Y.-C. Yang, Estimation of the Transient Heat Transfer Rate at the Boundary of an Electronic Chip Packaging, Numer. Heat Transfer A, vol. 54, no. 10, pp. 945-961, 2008.
31. S. Y. Kim, J.-M. Koo, and A. V. Kuznetsov, Effect of Anisotropy in Permeability and Effective Thermal Conductivity on Thermal Performance of an Aluminum Foam Heat Sink, Numer. Heat Transfer A, vol. 40, no. 1, pp. 21-36, 2001.
32. S. Y. Kim and A. V. Kuznetsov, Optimization of Pin-Fin Heat Sinks Using Anisotropic Local Thermal Nonequilibrium Porous Model in a Jet Impinging Channel, Numer. Heat Transfer A, vol. 44, no. 8, pp. 771-787, 2003.
33. G. Lorenzini and S. Moretti, Numerical Analysis on Heat Removal from Y-shaped Fins: Efficiency and Volume Occupied for a New Approach to Performance Optimisation, Int. J. Therm. Sci., vol. 46, pp. 573-579, 2007.
34. G. Ledezma and A. Bejan, Heat Sinks with Sloped Plate Fins in Natural and Forced Convection, Int. J. Heat Mass Transfer, vol. 39, no. 9, pp. 1773-1783, 1996.
35. S. B. Sathe and B. G. Sammakia, An Analytical Study of the Optimized Performance of an Impingement Heat Sink, J. Electron. Packag., vol. 126, pp. 528-534, 2004.
36. A. Shah, B. G. Sammakia, H. Srihari, and K. Ramakrishna, A Numerical Study of the Thermal Performance of an Impingement Heat Sink-Fin Shape Optimization, IEEE Trans. Compon. Packaging Technol., vol. 27, no. 4, pp. 710-717, 2004.
37. A. Shah, B. G. Sammakia, K. Srihari, and K. Ramakrishna, Optimization Study for a Parallel Plate Impingement Heat Sink, J. Electron. Packag., vol. 128, pp. 311-318, 2006.
38. X. L. Yu, Q. K. Feng, and Q. P. Liu, Research on the Heat Transfer and Flow Performance of a Composite Heat Sink, Journal of Xi'an Jiaotong University, vol. 37, no. 4, pp. 670-673 (in Chinese), 2003.
39. X. L. Yu, Q. K. Feng, and J. M. Feng, Research on Thermal Performance of Plate-Pin Fin Heat Sink, Journal of Xi'an Jiaotong University, vol. 38, no. 11, pp. 1114-1118 (in Chinese), 2004.
40. X. L. Yu, J. M. Feng, Q. K. Feng, and Q. W. Wang, Development of a Plate-Pin Fin Heat Sink and Its Performance Comparisons with a Plate Fin Heat Sink, Appl. Therm. Eng., vol. 25, pp. 173-182, 2005.
41. Y. H. Zhao, C. X. Chai, and Z. M. Luo, Numerical Simulation Study on Heat Transfer Characteristics of Plate-Pin Fin Oil Cooler, Design & Manufacture of Diesel Engine, vol. 14, no. 4, pp. 13-15 (in Chinese), 2005.
42. E. M. Sparrow, J. W. Ramsey, and C. A. C. Altemani, Experiments on In-line Pin Fin Arrays and Performance Comparisons with Staggered Arrays, J. Heat Transfer, vol. 102, pp. 44-50, 1980.
43. J. P. Van Doormaal and F. D. Raithby, Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows, Numer. Heat Transfer A, vol. 7, pp. 147-163, 1984.
44. S. V. Patankar, Numerical Heat Transfer and Fluid Flow, McGraw-Hill, New York, 1980.