Numerical predictions of heat transfer and flow characteristics of heat sinks with ribbed and dimpled surfaces in laminar flow

Numerical Heat Transfer; Part A: Applications

Volumn 53, Issue 11, 2008, Pages 1156-1175

  Wee, Hwabok ^a   Zhang, Qiang ^b   Ligrani, Phillip M ^b   Narasimhan, Susheela ^c  

^a University of Utah   (United States)

^b UNIVERSITY OF OXFORD   (United Kingdom)

^c CISCO SYSTEMS   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

HEAT SINKS; LAMINAR FLOW; NUMERICAL METHODS; STEADY FLOW; VELOCITY MEASUREMENT;

FLOW CHARACTERISTICS; NUMERICAL CODES; STATIC PRESSURE; SURFACE NUSSELT NUMBER DISTRIBUTIONS;

HEAT TRANSFER;

EID: 38949125827     PISSN: 10407782     EISSN: 15210634     Source Type: Journal    
DOI: 10.1080/10407780701853371     Document Type: Article

References (31)

1. E. M. Sparrow, B. R. Baliga, and S. V. Patankar, Forced Convection Heat Transfer from a Shrouded Fin Array and without Tip Clearance, Trans. ASME, J. Heat Transfer, vol. 100, pp. 572-579, 1978.
2. D. S. Kadle and E. M. Sparrow, Numerical and Experimental Study on Turbulent Heat Transfer and Fluid Flow in Longitudinal Fin Arrays, Trans. ASME, J. Heat Transfer, vol. 108, pp. 16-23, 1986.
3. E. M. Sparrow and D. S. Kadle, Effect of Tip-to-Shroud Clearance on Turbulent Heat Transfer from a Shroud, Longitudinal Fin Array, Trans. ASME, J. Heat Transfer, vol. 108, pp. 519-524, 1986.
4. K. S. Lau and R. L. Mahajan, Effects of Tip Clearance and Fin Density on the Performance of Heat Sinks for VLSI Packages, IEEE Trans. Components, Hybrids, Mfg. Technol., vol. 12, pp. 757-765, 1989.
5. R. S. Lee, H. C. Huang, and W. Y. Chen, A Thermal Characteristic Study of Extrude-Type Heat Sinks in Considering Air Flow Bypass Phenomenon, Sixth IEEE Semi-Therm Symp., Phoenix, AZ, 1990, pp. 95-102.
6. A. V. Barrett and I. F. Obienlo, Characterization of Longitudinal Fin Heat Sink Thermal Performance and Flow Bypass Effects through CFD Methods, Thirteenth IEEE Semi-Therm Symp., Austin, TX, 1997, pp. 158-164.
7. T. D. Yuan, Computational Modeling of Flow Bypass Effects on Straight Fin Heat Sink in Rectangular Duct, Twelfth IEEE Semi-Therm Symp., Austin, TX, 1996, pp. 164-168.
8. R. W. Knight, J. S. Goodling, and B. E. Gross, Optimal Thermal Design of Air Cooled Forced Convection Finned Heat Sinks-Experimental Verification, IEEE Trans. Components, Hybrids, Mfg. Technol., vol. 15, pp. 754-760, 1992.
9. S. Lee, Optimum Design and Selection of Heat Sinks, IEEE Trans. Components, Hybrids, Mfg. Technol., vol. 18, pp. 812-817, 1995.
10. W. B. Krueger and A. Bar-Cohen, Optimal Numerical Design of Forced Convection Heat Sinks, IEEE Trans. Components, Hybrids, Mfg. Technol., vol. 27, pp. 417-425, 2004.
11. P. Teertstra, M. M. Yovanovich, J. R. Culham, and T. Lemczyk, Analytical Forced Convection Modeling of Plate Fin Heat Sinks, Fifteenth IEEE Semi- Therm Symp., 1997, pp. 34-41.
12. P. Sathyamurthy, P. W. Runstadler, and S. Lee, Numerical and Experimental Evaluation of Planar and Staggered Heat Sinks, Intersociety Conf. on Thermal Phenomena, Orlando, FL, 1996, pp. 132-139.
13. H. Jonsson and B. Palm, Thermal and Hydraulic Behavior of Plate Fin and Strip Fin Heat Sinks under Varying Bypass Conditions, IEEE Trans. Components Pkg. Technol., vol. 23, pp. 47-54, 2000.
14. H. Jonsson and B. Moshfegh, Modeling of the Thermal and Hydraulic Performance of Plate Fin, Strip Fin, and Pin Fin Heat Sinks-Influence of Flow Bypass, IEEE Trans. Components Pkg. Technol., vol. 24, pp. 142-149, 2001.
15. C. L. Chapman, S. Lee, and W. L. Schmidt, Thermal Performance of an Elliptical Pin Fin Heat Sink, Tenth IEEE Semi-Therm Symp., San Jose, CA, 1994, pp. 24-31.
16. K. Sikka, K. E. Torrance, C. U. Scholler, and P. I. Salanova, Heat Sinks with Fluted and Wavy Plate Fins in Natural and Low-Velocity Forced Convection, IEEE Trans. Components Pkg., vol. 25, pp. 283-292, 2002.
17. P. M. Ligrani and G. I. Mahmood, Spatially-Resolved Heat Transfer and Friction Factors in a Rectangular Channel with 45-Deg Angled Crossed-Rib Turbulators, Trans. ASME, J. Turbomachinery, vol. 125, pp. 676-684, 2003.
18. S. Y. Won, N. K. Burgess, S. Peddicord, and P. M. Ligrani, Spatially-Resolved Surface Heat Transfer for Parallel Rib Turbulators with 45 Deg Orientations including Test Surface Conduction Analysis, Trans. ASME, J. Heat Transfer, vol. 126, pp. 193-201, 2004.
19. G. I. Mahmood, P. M. Ligrani, and K. Chen, Variable Property and Temperature Ratio Effects on Nusselt Numbers in a Rectangular Channel with 45 Deg Angled Rib Turbulators, ASME, Trans. J. Heat Transfer, vol. 125, pp. 769-778, 2003.
20. Y.-J. Jang, H.-C. Chen, and J.-C. Han, Computation of Flow and Heat Transfer in Two-Pass Channels With 60 Deg Ribs, Trans. ASME, J. Heat Transfer, vol. 123, pp. 563-575, 2001.
21. A. Murata and S. Mochizuki, Large Eddy Simulation of Turbulent Heat Transfer in an Orthogonally Rotating Square Duct with Angled Rib Turbulators, Trans. ASME, J. Heat Transfer, vol. 123, pp. 868-887, 2001.
22. R. Kiml, S. Mochizuki, and A. Murata, Effects of Rib Arrangements on Heat Transfer and Flow Behavior in a Rectangular Rib-Roughened Passage: Application to Cooling of Gas Turbine Blade Trailing Edge, Trans. ASME, J. of Heat Transfer, vol. 123, pp. 675-681, 2001.
23. N. K. Burgess, M. M. Oliveira, and P. M. Ligrani, Nusselt Number Behavior on Deep Dimpled Surfaces within a Channel, Trans. ASME, J. Heat Transfer, vol. 125, pp. 11-18, 2003.
24. G. I. Mahmood and P. M. Ligrani, Heat Transfer in a Dimpled Channel: Combined Influences of Aspect Ratio, Temperature Ratio, Reynolds Number, and Flow Structure, Int. J. Heat Mass Transfer, vol. 45, pp. 2011-2020, 2002.
25. M. Y. Belen'kiy, M. A. Gotovskiy, B. M. Lekakh, B. S. Fokin, and K. S. Dolgushin, Heat Transfer Augmentation Using Surfaces Formed by a System of Spherical Cavities, Heat Transfer Res., vol. 25, pp. 196-203, 1994.
26. P. M. Ligrani, G. I. Mahmood, J. L. Harrison, C. M. Clayton, and D. L. Nelson, Flow Structure and Local Nusselt Number Variations in a Channel with Dimples and Protrusions on Opposite Walls, Int. J. Heat Mass Transfer, vol. 44, pp. 4413-4425, 2001.
27. P. M. Ligrani, J. L. Harrison, G. I. Mahmood, and M. L. Hill, Flow Structure due to Dimple Depressions on a Channel Surface, Phys. of Fluids, vol. 13, pp. 3442-3451, 2001.
28. C. W. Leung, S. Chan, and T. L. Chan, Numerical Simulation of Laminar Forced Convection in an Air-Cooled Horizontal Printed Circuit Board Assembly, Numer. Heat transfer A, vol. 37, pp. 373-393, 2000.
29. D. D. Luo, C. W. Leung, T. L. Chan, and W. O. Wong, Flow and Forced Convection Characteristics of Turbulent Flow through Parallel Plates with Periodic Transverse Ribs, Numer. Heat Transfer A, vol. 48, pp. 43-58, 2005.
30. D. D. Luo, C. W. Leung, T. L. Chan, and W. O. Wong, Simulation of Turbulent Flow and Forced Convection in a Triangular Duct with Internal Ribbed Surfaces, Numer. Heat Transfer A, vol. 48, pp. 447-459, 2005.
31. Fluent 6.1 User's Guide, Fluent, Inc., 2003.