Effect of dental finishing instruments on the surface roughness of composite resins as elucidated by atomic force microscopy

Microscopy and Microanalysis

Volumn 14, Issue 5, 2008, Pages 380-386

  Botta, Ana Carolina ^a   Duarte Jr , Sillas ^b   Filho, Pedro Iris Paulin ^c   Gheno, Simoni Maria ^c  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b CASE WESTERN RESERVE UNIVERSITY   (United States)

^c FEDERAL UNIVERSITY OF SÃO CARLOS   (Brazil)

Author keywords

Atomic force microscopy; Carbide bur; Diamond bur; Finishing techniques; Microhybrid composite resin; Nanofiller composite resin; Surface roughness

Indexed keywords

ACRYLIC ACID RESIN; COMPOSITE DENTAL RESIN; POLYURETHAN; RESIN;

ARTICLE; ATOMIC FORCE MICROSCOPY; DENTAL SURGERY; INSTRUMENTATION; SURFACE PROPERTY; TOOTH BRUSHING;

ACRYLIC RESINS; COMPOSITE RESINS; DENTAL POLISHING; DENTAL RESTORATION, PERMANENT; MICROSCOPY, ATOMIC FORCE; POLYURETHANES; SURFACE PROPERTIES;

EID: 52149094301     PISSN: 14319276     EISSN: 14358115     Source Type: Journal    
DOI: 10.1017/S1431927608080768     Document Type: Article

References (40)

1. ATTAR, N. (2007). The effect of finishing and polishing procedures on the surface roughness of composite resin materials. J Contemp Dent Pract 8, 27-35.
2. BADRA, V.V., FARAONI, J.J., RAMOS, R.P. & PALMA-DIBB, R.G. (2005). Influence of different beverages on the microhardness and surface roughness of resin composites. Oper Dent 30, 213-219.
3. BAGHERI, R., BURROW, M.F. & TYAS, M. (2005). Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 33, 389-398.
4. BERASTEGUI, E., CANALDA, C., BRAU, E. & MIGUEL, C. (1992). Surface roughness of finished composite resins. J Prosthet Dent 68, 742-749.
5. BOGHOSIAN, A.A., RANDOLPH, R.G. & JEKKALS, V.J. (1987). Rotatory instrument finishing of microfilled and small-particle hybrid composite resins. J Am Dent Assoc 115, 299-301.
6. CHUNG, K. (1994). Effects of finishing and polishing procedures on the surface texture of resin composites. Dent Mater 10, 325-330.
7. FERRACANE, J.L., CONDON, J.R. & MITCHEM, J.C. (1992). Evaluation of subsurface defects created during the finishing of composites. J Dent Res 71, 1628-1632.
8. GREEN, J.B.D., IDOWU, A. & CHAN, S.S.F. (2003). Modified tips: Molecules to cells. Materials Today 6, 22-29.
9. GULER, A.U., KURT, S. & KULUNK, T. (2005). Effects of various finishing procedures on the staining of provisional restorative materials. J Prosthet Dent 93, 453-458.
10. HABELITZ, S., MARSHALL, S.J., MARSHALL, G.W., JR. & BALOOCH, M. (2001). Mechanical properties of human dental enamel on the nanometre scale. Arch Oral Biol 46, 173-183.
11. HEATH, J.R., JORDAN, J.H. & WATTS, D.C. (1993). The effect of time of trimming on the surface finish of anterior composite resins. J Oral Rehabil 20, 45-52.
12. HEINTZE, S.D., FORJANIC, M. & ROUSSON, V. (2006). Surface roughness and gloss of dental materials as function of force and polishing time in vitro. Dent Mater 22, 146-165.
13. JONIOT, S.B., GRÉGOIRE, G.L., AUTHER, A.M. & ROQUES, Y.M. (2000). Three-dimensional optical profilometry analysis of surface states obtained after finishing sequences for three composite resins. Oper Dent 25, 311-315.
14. JUNG, M., BAUMSTIEGER, M. & KLIMEK, J. (1997). Effectiveness of diamond-impregnated felt wheels for polishing a hybrid composite. Clin Oral Invest 1, 71-76.
15. KAKABOURA, A., FRAGOULI, M., RAHIOTS, C. & SILIKAS, N. (2007). Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter. J Mater Sci Mater Med 18, 155-163.
16. LOPES, G.C., FRANKE, M.F. & MAIA, H.P. (2002). Effect of finishing time and techniques on marginal sealing ability of two composite restorative materials. J Prosthet Dent 88, 32-36.
17. LUTZ, F., SETCOS, J.C. & PHILLIPS, R.W. (1983). New finishing instruments for composite resins. J Am Dent Assoc 107, 575-580.
18. MILES, M., ANTOGNOZZI, M., HASCHKE, H., HOBBS, J., HUMPHRIS, A. & MCMASTER, T. (2003). Tour de force microscopy. Materials Today 6, 30-37.
19. NAGEM FILHO, H., D'AZEVEDO, M.T.F.S., NAGEM, H.D. & MARSOLA, F.P. (2003). Surface roughness of composite resins after finishing and polishing. Braz Dent J 14, 37-41.
20. OZGUNALTAY, G., YAZIGI, A.R. & GORUCU, J. (2003). Effect of finishing and polishing procedures on the surface roughness of new tooth-coloured restoratives. J Oral Rehabil 30, 218-224.
21. PARAVINA, R.D., ROEDER, L., LU, H., VOGEL, K. & POWERS, J.M. (2004). Effect of finishing and polishing procedures on surface roughness, gloss and color of resin composites. Am J Dent 17, 262-266.
22. PATEL, S.B., GORDAN, V.V., BARRETT, A.A. & SHEN, C. (2004). The effect of surface finishing and storage solutions on the color stability of resin-based composites. J Am Dent Assoc 135, 587-594.
23. REIS, A.F., GIANNINI, M., LOVADINO, J.R. & AMBROSANO, G.M. (2003). Effects of various finishing systems on the surface roughness and staining susceptibility of packable composite resins. Dent Mater 19, 12-18.
24. REIS, A.F., GIANNINI, M., LOVADINO, J.R. & DIAS, C.T.S. (2002). The effect of six polishing systems on the surface roughness of two packable resin-based composites. Am J Dent 15, 193-197.
25. ROEDER, L.B. & POWERS, J.M. (2004). Surface roughness of resin composite prepared by single-use and multi-use diamonds. Am J Dent 17, 109-112.
26. SEITAVUOPIO, P., RANTANEN, J. & YLIRUUSI, J. (2003). Tablet surface characterization by various imaging techniques. Int J Pharm 254, 281-286.
27. SILIKAS, N., KAVVADIA, K., ELIADES, G. & WATTS, D. (2005). Surface characterization of modern resin composites: A multi-technique approach. Am J Dent 18, 95-100.
28. SILIKAS, N., WATTS, D.C., ENGLAND, K.E.R. & JANDT, K.D. (1999). Surface fine structure of treated dentine investigated with tapping mode atomic force microscopy (TMAFM). J Dent 27, 137-144.
29. TURKUN, L.S. & TURKUN, M. (2004). The effect of one-step polishing system on the surface roughness of three esthetic resin composite materials. Oper Dent 29, 203-211.
30. TURSSI, C.P., FERRACANE, J.L. & SERRA, M. (2005). Abrasive wear of resin composites as related to finishing and polishing procedures. Dent Mater 21, 641-648.
31. TURSSI, C.A., SAAD, J.R.C., DUARTE, S.L.L., JR. & RODRIGUES, A.L., JR. (2000). Composite surfaces alter finishing and polishing techniques. Am J Dent 13, 136-138.
32. UCTASLY, M.B., ARISU, H.D., OMÜRLÜ, H., ELIGÜZELOGLU, E., OZCAN, S. & ERGUN, G. (2007). The effect of different finishing and polishing systems on the surface roughness of different composite restorative materials. J Contemp Dent Pract 8, 89-96.
33. VAN DIJKEN, J.W.V., MEURMAN, J.H. & JARVINEN, J. (1980). Effect of finishing procedures on surface textures of some resin restoratives. Acta Odontol Scand 38, 293-301.
34. WANG, Y. & CHEN, X. (2007). Carbon nanotubes: A promising standard for quantitative evaluation of AFM tip apex geometry. Ultramicroscopy 107, 293-298.
35. WENNERBERG, A., OHLSSON, R., ROSÉN, B.G. & ANDERSSON, B. (1996). Characterizing three-dimensional topography of engineering and biomaterial surfaces by confocal laser scanning and stylus techniques. Med Eng Phys 18, 548-556.
36. WILDER, A.D., JR., SWIFT, E.J., JR., MAY, K.N., JR., THOMPSON, J.Y. & MCDOUGAL, R.A. (2000). Effect of finishing technique on the microleakage and surface texture of resin-modified glass ionomer restorative materials. J Dent 28, 367-373.
37. YANNIKAKIS, A.S., ZISSIS, A.J., POLYZOIS, G.L. & CARONI, C. (1998). Color stability of provisional resin restorative materials. J Prosthet Dent 80, 33-539.
38. YAP, A.U., LOW, J.S. & ONG, L.F. (2000). Effect of food-simulating liquids on surface characteristics of composite and polyacid-modified composite restoratives. Oper Dent 25, 170-176.
39. YAP, A.U.J., SAU, C.W. & LYE, K.W. (1998). Effects of finishing/ polishing time on surface characteristics of tooth-coloured restoratives. J Oral Rehabil 25, 456-461.
40. YAZICI, A.R., MÜFTÜ, A. & KUGEL, G. (2007). Three-dimensional surface profile analysis of different types of flowable restorative resins following different finishing protocols. J Contemp Dent Pract 8, 9-17.