The utilization of reconfigurable hardware to implement digital controllers: A review

IEEE International Symposium on Industrial Electronics

Volumn , Issue , 2007, Pages 2380-2385

  Paiz, Carlos ^a   Porrmann, Mario ^a  

^a UNIVERSITY OF PADERBORN   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

DIGITAL ARITHMETIC; ELECTRONICS INDUSTRY; FIELD PROGRAMMABLE GATE ARRAYS (FPGA); GLASS FIBER REINFORCED PLASTICS; INDUSTRIAL ELECTRONICS; TECHNICAL PRESENTATIONS;

DIGITAL CONTROLLERS; FIELD-PROGRAMMABLE GATE ARRAYS; INTERNATIONAL SYMPOSIUM; POTENTIAL BENEFITS; RECONFIGURABLE HARDWARE; RESEARCH TRENDS; RUN-TIME RECONFIGURATION; TECHNOLOGY MIGRATION;

TECHNOLOGY;

EID: 44349175461     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ISIE.2007.4374979     Document Type: Conference Paper

References (52)

1. E. Monmasson and Y. Chapuis, "Contributions of FPGAs to the control of electrical systems, a review," IEEE Industrial Electronics Society Newsletter, vol. 49, no. 4, pp. 8-15, December 2002.
2. C. Juang and C. Hsu, "Temperature control by chip-implemented adaptive recurrent fuzzy controller designed by evolutionary algorithm," in IEEE Transactions On Circuits And Systems, vol. 52, no. 11, November 2005, pp. 2376-2384.
3. T. Nakamura, Y. Awa, H. Shimoji, and H. Karasawa, "Control system of electrostatic levitation furnace," in Acta Astronautica, vol. 50, no. 10, 2002, pp. 609-614.
4. N. Chujo, "Fail-safe ECU system using dynamic reconfiguration of FPGA," in R & D Review of Toyota CRDL, vol. 37, no. 2, April 2002, pp. 54-60.
5. R. Tessier and W. Burleson, "Reconfigurable computing for digital signal processing: A survey," in Journal of VLSI Signal Processing, vol. 28. Elsevier, 2001, pp. 7-27.
6. M. Naouar, L. Charaabi, E. Monmasson, and I. Belkhodja, "Realization of a library of FPGA reconfigurable IP-Core functions for the control of electrical systems," in 11th International Conference on Power Electronics and Motion Control, 2004.
7. Y. Chapuis, J. Blonde, and F. Braun, "FPGA implementation by modular design reuse mode to optimize hardware architecture and performance of AC motor controller algorithm," in 11th International Conference on Power Electronics and Motion Control, 2004.
8. D. Carrica, M. Funes, and S. Gonzalez, "Novel stepper motor controller based on FPGA hardware implementation," in IEEE/ASME Transactions On Mechatronics, vol. 8, no. 1. IEEE/ASME, March 2003, pp. 120-124.
9. P. Zumel, A. de Castro, O. Garca, T. Riesgo, and J. Uceda, "Concurrent and simple digital controller of an AC/DC converter with power factor correction," in IEEE Transactions on Power Electronics, 2003, pp. 334-343.
10. A. Hernandez, J. Urena, J. Garcia, M. Mazo, D. Hernanz, J. Derutin, and J. Serot, "Ultrasonic ranging sensor using simultaneous emissions from different transducers," in IEEE Transactions On Ultrasonics, Ferroelectrics, And Frequency Control, vol. 51, no. 12, December 2004, pp. 1660-1670.
11. M. Adamski, "Reprogrammable application specific logic controllers and SFC based design," in 45th International Scientific Colloquium Ilmenau Technical University, 2000.
12. P. He, M. Jin, L. Yang, R. Wei, Y. Liu, H. Cai, H. Liu, N. Seitz, J. Butterfass, and G. Hirzinger, "High performance DSP/FPGA controller for implementation of HIT/DLR dexterous robot hand," in IEEE International Conference on Robotics and Automation, New Orleans, LA, April 2004, pp. 3397-3402.
13. S. Bolognani, M. Ceschia, M. Tomasini, L. Tubiana, and M. Zigliotto, "FPGA implementation of an iterative algorithm for time optimal control of ac drives," in 11th International Conference on Power Electronics and Motion Control, 2004.
14. R. Cumplido-Parra, S. R. Jones, R. M. Godall, F. Mitchell, and S. Bateman, "High performance control system processor," in System Design Automation: Fundamentals, Principles, Methods, Examples, R. Merker and W. Schwarz, Eds. Kluwer Academic Publishers, March 2001, pp. 140-151.
15. D. Roggen, S. Hofmann, T. Y., and D. Floreano, "Hardware spiking neural network with run-time reconfigurable connectivity in an autonomous robot," in ACM portal, 2003.
16. S. Poussier, R. H., and S. Weber, "Adaptable thermal compensation system for strain gage sensors based on programmable chip," in Sensors And Actuators A: Physical, vol. 199, no. 2. Elsevier, April 2004, pp. 412-417.
17. Y. Kung and G. Shu, "Design and implementation of a control IC for vertical articulated robot arm using SOPC technology," in Proceedings of the IEEE International Conference on Mechatronics, Taipei, Taiwan, July 2005, pp. 532-536.
18. K. Tazi, E. Monmasson, and J. P. Louis, "Description of an entirely reconfigurable architecture dedicated to the current vector control of a set of ac machines," in IEEE International Conference on Industrial Electronics, Control, and Instrumentation, vol. 3, Novembre 1999, pp. 1415-1420.
19. J. A. Boluda and J. Domingo, "On the advantages of combining differential algorithms and log polar vision for detection of self motion from a mobile robot," in Robotics and Autonomous Systems, vol. 37. Elsevier, 2001, pp. 283-296.
20. R. Ruelland, G. Gateau, T. Meynard, and J. Hapiot, "Design of FPGA-based emulator for series multicell converters using co-simulation tools," in IEEE Transactions On Power Electronics, vol. 18, no. 1, January 2003, pp. 244-252.
21. T. S. Li, S. Chang, and Y. Chen, "Implementation of human-like driving skills by autonomous fuzzy behavior control on an FPGA-based car-like mobile robot," in IEEE Transactions On Industrial Electronics, vol. 50, no. 5, October 2003, pp. 867-880.
22. E. Koutroulis, A. Dollas, and K. Kalaitzakis, "High-frequency pulse width modulation implementation using FPGA and CPLD ICs," in Journal of Systems Architecture, 2005.
23. A. Chohra and P. Schll, "Neural networks (NN) based learning of elementary behaviors and their integration in FPGA architectures for a fast moving robot team (robocup)," in Proceedings of the Workshop on Autonomous Artificial Systems Exploring Hostile Environments, 2001, pp. 65 - 71.
24. Y. Yin and R. Zane, "Digital phase control for resonant inverters," in IEEE Power Electronics Letters, vol. 2, no. 2, June 2004, pp. 51-54.
25. F. Ricci and H. Le-Huy, "Modeling and simulation of FPGA-based variable-speed drives using simulink," in Mathematics and Computers in Simulation, vol. 63, 2003, pp. 183-195.
26. Z. Fang, J. Carletta, and R. Veillette, "A methodology for FPGA-Based control implementation," in IEEE Transactions On Control Systems Technology, vol. 13, no. 6, November 2005, pp. 977-987.
27. M. Deppe, M. Zanella, M. Robrecht, and W. Hardt, "Rapid prototyping of real-time control laws for complex mechatronic systems a case study," in The Journal of Systems and Software, vol. 70, 2004, pp. 263-274.
28. P. S. B. Nascimento, P. R. M. Pand Maciel, M. E. Lima, R. E. Sant'ana, and A. G. S. Filho, "A partial reconfigurable architecture for controllers based on petri nets," in SBCCI '04: Proceedings of the 17th symposium on Integrated circuits and system design. New York, NY, USA: ACM Press, 2004, pp. 16-21.
29. A. Cabrera, S. Sanchez-Solano, P. Brox, A. Barriga, and R. Senhadj, "Hardware software codesign of configurable fuzzy control systems," in Applied Soft Computing, vol. 4. Elsevier Science, 2004, pp. 271-285.
30. C. Paiz, T. Chinapirom, U. Witkowski, and M. Porrmann, "Dynamically reconfigurable hardware for autonomous mini-robots," in 32nd Annual Conference of the IEEE Industrial Electronics Society IECON 06, Paris, France, November 2006.
31. M. Tombs, M. Henry, and C. Peter, "From research to product using a common development platform," in Control Engineering Practice, vol. 12. Elsevier, 2004, pp. 503-510.
32. L. Reyneri and F. Renga, "Speeding-up the design of HW/SW implementations of neuro-fuzzy systems using the codesimulink environment," in Applied Soft Computing, vol. 4, 2004, pp. 227-240.
33. M. Murshidul-Islam, D. R. Allee, S. Konasani, and A. A. Rodriguez, "A low-cost digital controller for a switching DC converter with improved voltage regulation," in POWER ELECTRONICS LETTERS, vol. 2, no. 4. IEEE, December 2004, pp. 121-124.
34. G. Benedetti, M.and Uicich, "New high-performance thyristor gate control set for line-commutated converters," in IEEE Transactions On Industrial Electronics, vol. 46, no. 5, October 1999, pp. 972-977.
35. S. Donecker, T. Lasky, and B. Ravani, "A mechatronic sensing system for vehicle guidance and control," in IEEE/ASME Transactions On Mechatronics, vol. 8, no. 4, December 2003, pp. 500-510.
36. N. Acosta and M. Tosini, "Custom architectures for fuzzy and neural networks controllers," in Journal of Computer Science and Technology, R. Jordan, Ed., vol. 2, 2002, pp. 9-15.
37. T. Reinemann and R. Kasper, "High speed implementation of controllers and filters for mechatronic systems," in TechOnline, 2003.
38. P. Mattavelli, G. Spiazzi, and P. Tenti, "Predictive digital control of power factor preregulators with input voltage estimation using disturbance observers," in IEEE Transactions On Power Electronics, vol. 20, no. 1, January 2005, pp. 140-147.
39. C. Paiz, B. Kettelhoit, A. Klassen, and M. Porrmann, "Dynamically reconfigurable hardware for digital controllers in mechatronic systems," in IEEE International Conference on Mechatronics (ICM2005), Taipei, Taiwan, July 2005.
40. L. Charaabi, E. Monmasson, M.-A. Nassani, and I. Slama-Belkhodja, "FPGA-based implementation of DTSFC and DTRFC algorithms," in Annual Conference of the IEEE Industrial Electronics Society, 2005.
41. K. D. Oldknow and I. Yellowley, "FPGA-Based servo control and three-dimensional dynamic interpolation," in IEEE/ASME Transactions On Mechatronics, vol. 10, no. 1, February 2005, pp. 98-110.
42. Y. C. Ho, K. F. Man, K. S. Tang, and S. Kwong, "A codesign approach to real-time high precision control," Real-Time Systems, vol. 19, no. 1, pp. 41-60, 2000.
43. D. Kim, "An implementation of fuzzy logic controller on the reconfigurable FPGA system," in IEEE Transactions On Industrial Electronics, vol. 47, no. 3. IEEE, June 2000, pp. 703-715.
44. R. Isermann, J. Schaffnit, and J. Sinsel, "Hardware-in-the-loop simulation for the design and testing of engine-control systems," in Control Engineering Practice, vol. 7, no. 5. Elsevier, May 1999, pp. 643-653.
45. C. Paiz, C. Pohl, and M. Porrmann, "Reconfigurable hardware in-the-loop simulations for digital control design," in 3rd International Conference on Informatics in Control, Automation and Robotics (ICINCO 2006), Setubal, Portugal, August 2006.
46. R. Romero-Troncoso, G. Herrera-Ruiz, I. Terol-Villalobos, and J.-C. J. C., "FPGA based on-line tool breakage detection system for CNC milling machines," in Mechatronics, vol. 14, 2004, pp. 439-454.
47. J. S. Kelly, V. S. Rao, H. J. Pottinger, and H. C. Bowman, "Design and implementation of digital controllers for smart structures using field programmable gate arrays," in Smart Materials and Structures, vol. 6, no. 5, October 1997, pp. 559-572.
48. K. Oldknow and I. Yellowley, "Design implementation and validation of a system for the dynamic reconfiguration of open architecture machine tool controls," in International Journal of Machine Tools and Manufacture, vol. 41, 2001, pp. 795-808.
49. R. Scrofano, S. Choi, and V. Prasanna, "Energy efficiency of FPGAs and programmable processors for matrix multiplication," in The First IEEE International Conference on Field Programmable Technology (FPT), December 2002.
50. J. Vasarhelyi, I. M., C. Szabo, I. Incze, and T. Adam, "FPGA implementations of the reconfigurable system for ac drives," in 11th International Conference on Power Electronics and Motion Control, 2004.
51. K. Danne, C. Bobda, and H. Kalte, "Run-time exchange of mechatronic controllers using partial hardware reconfiguration," in International Conference on Field Programmable Logic and Applications, September 2003.
52. S. Toscher, R. Kasper, and T. Reinemann, "Dynamic reconfiguration of mechatronic real-time systems based on configuration state machines." in 19th International Parallel and Distributed Processing Symposium, 2005.