FPGA-based servo control and three-dimensional dynamic interpolation

IEEE/ASME Transactions on Mechatronics

Volumn 10, Issue 1, 2005, Pages 98-110

  Oldknow, Kevin D ^a   Yellowley, Ian ^a  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

Field programmable gate arrays (FPGAs); Intelligent control; Machine tool control; Machining; Motion control; Process monitoring

Indexed keywords

CONTROL SYSTEM SYNTHESIS; INTELLIGENT CONTROL; INTERPOLATION; MACHINE TOOLS; MACHINING; MONITORING; MOTION CONTROL; SERVOMECHANISMS;

DYNAMIC INTERPOLATION; MACHINE TOOL CONTROL; PROCESS MONITORING;

FIELD PROGRAMMABLE GATE ARRAYS;

EID: 14644388175     PISSN: 10834435     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMECH.2004.842217     Document Type: Article

References (39)

1. I. Yellowley and E. A. Gunn, "The optimal subdivision of cut in multi-pass machining operations," Int. J. Prod. Res., vol. 17, no. 9, pp. 1573-1588, 1989.
2. K. Erkorkmaz, "High speed contouring control for machine tool drives," M.A.Sc, Univ. of British Columbia, Vancouver, 1999.
3. W. S. Yun, J. H. Ko, H. U. Lee, D. W. Cho, and K. F. Ehmann, "Development of a virtual machining system, Part 3: Cutting process simulation in transient cuts," Int. J. Mach. Tools Manuf., vol. 42, pp. 1617-1626, 2002.
4. T. Dow, E. Miller, A. Sohn, and K. Gerrard, "Compensation of tool forces in small diameter end mills," in Proc. ASPE Annu. Meet., vol. 20, Monterey, CA, Oct. 1999, pp. 546-550.
5. J. H. Ko, W. S. Yun, and D. W. Cho, "Off-line feed rate scheduling using virtual CNC based on an evaluation of cutting performance," Comput.-Aided Des., vol. 35, no. 4, pp. 383-393, 2003.
6. T. S. Ong and B. K. Hinds, '"The application of tool deflection knowledge in process planning to meet geometric tolerances," Int. J. Mach. Tools Manuf., vol. 43, pp. 731-737, 2003.
7. Y. Koren, Computer Control of Manufacturing Systems. New York: McGraw-Hill, 1983.
8. Th. Lundholm, "A flexible real-time adaptive control system for turning," Ann. CIRP, vol. 40, no. 1, pp. 441-444, 1991.
9. I. Yellowley and P. R. Pottier, "The integration of process and geometry within an open architecture machine tool controller," Int. J. Mach. Tools Manuf., vol. 34, no. 2, pp. 277-293, 1994.
10. S. Schofield and P. Wright, "Open architecture controllers for machine tools. Part 1: Design principles," ASME J. Manuf. Sci. Eng., vol. 12, pp. 417-424, 1998.
11. T. Watanabi and S. Iwai, "A control system to improve the accuracy of finished surfaces in milling," ASME J. Dynam. Syst., Meets. Contr. vol. 105, pp. 192-199, 1983.
12. M. Y. Yang and J. G. Choi, "A tool deflection compensation system for end milling accuracy improvement," ASME J. Manuf. Sci. Eng., vol. 120, no. 2, pp. 222-229, 1998.
13. I. Yellowley and P. Pottier, "A note on a simple method for the improvement of interpolation accuracy in a general purpose, multiprocessor based motion controller," Int. J. Mach. Tools Manuf. vol. 29, no. 2, pp. 287-292, 1989.
14. I. Yellowley and D. Adey, "A new approach to the real time optimization of turning operations," Int. J. Mach. Tools Manuf., vol. 32, no. 3, pp. 453-466, 1992.
15. R. Ardekani and I. Yellowley, "The control of multiple constraints within an open architecture machine tool controller," ASME J. Manuf. Sci. Eng., vol. 118, pp. 388-393, 1996.
16. R. Seethaler and I. Yellowley, "The regulation of position error in contouring systems," Int J. Mach. Tools Manuf., vol. 36, no. 6, pp. 713-728, 1996.
17. R. Seethaler, "Integrated Planning and Control in Milling," Ph.D. dissertation, Univ. of British Columbia, Vancouver, 1997.
18. L. Yang and I. Yellowley, "High-speed contouring using a novel dynamic interpolation mechanism," Int J. Mach. Tools Manuf., vol. 41, pp. 773-794, 2001.
19. K. D. Oldknow and I. Yellowley, 'Three-dimensional dynamic interpolation using stateline based control architectures," Int J. Mach. Tools Manuf., vol. 42, pp. 1627-1641, 2002.
20. K. D. Oldknow, and I. Yellowley, "Implementation and validation of 3-dimensional dynamic interpolation using an FPGA based controller," Int J. Mach. Tools Manuf., vol. 43, pp. 937-945, 2003.
21. Y. Koren and C. C. Lo, "Variable-gain cross-coupling controller for contouring," Ann. CIRP, vol. 40, no. 1, pp. 371-374, 1991.
22. Y. Koren, and C. C. Lo, "Advanced controllers for feed drives," Ann. CIRP, vol. 41, no. 2, pp. 689-698, 1992.
23. C. C. Lo, "An improved algorithm for cross-coupling control of multi-axis machine tools," ASME J. Manuf. Sci. Eng., vol. 121, pp. 537-540, 1999.
24. S. S. Yeh and P. L. Hsu, "Theory and applications of the robust cross-coupled control design," ASME J. Dynam. Syst., Mea. Contr., vol. 121, no. 3, pp. 524-530, 1999.
25. Y. T. Shih, C. S. Chen, and A. C. Lee, "A novel cross-coupling control design for bi-axis motion," Int J. Mach. Tools Manuf., vol. 42, pp. 1539-1548, 2002.
26. XESS Corporation, XSV Board V1.0 Manual,, X Engineering Software Systems Corp., Apex; NC, 2001.
27. A. K. Sharma, Programmable Logic Handbook - PLD's, CPLD's & FPGAs. New York: McGraw-Hill, 1998.
28. W. D. Peterson, WISHBONE System-On-Chip (SoC) Interconnection Architecture for Portable IP Cores. Corcoran, MI: Silicore Corp., 2001.
29. I. Yellowley, R. Ardekani, L. Yang, and R. Seethaler, "Development of robust extensible architectures for machine tool control." Proc. SPIE, vol. 2912, pp. 72-81, 1996.
30. T. Fung, "Quadrature Encoder Interface using FPGA,", Internal UBC Rep., 1997.
31. Xilinx Corporation, using the Virtex Block SelectRam+ Features (App Note XAPP130), Xilinx Corp., San Jose, CA, 2000.
32. K. D. Oldknow and I. Yellowley, "Design, implementation and validation of a system for the dynamic reconfiguration of open architecture machine tool controls." Int J. Mach. Tools Manuf., vol. 41, pp. 795-808, 2001.
33. Forth Inc, SwiftForth Development System for Windows - Reference Manual, 3rd ed., Forth Inc., Manhattan Beach, CA, 1999.
34. A. P. Xu, Y. X. Qu, D. W. Zhang, and T. Huang, "Simulation and experimental investigation of the end milling process considering the cutter flexibility," Int J. Mach. Tools Manuf., vol. 43, pp. 283-292, 2002.
35. M. Y. Yang and C. G. Sim, "Reduction of machining errors by adjustment of feedrates in the ball-end milling process." Int. J. Prod. Res. vol. 31, no. 3, pp. 665-689, 1993.
36. I. Yellowley, "A note on the significance of the quasimean resultant force and the modeling of instantaneous torque and forces in peripheral milling operations." ASME J. Eng. Industry, vol. 110, pp. 300-303, 1988.
37. A. D. Fisher, "The development of a generative computer-aided process planning package for the peripheral milling process," M.Eng. thesis, McMaster Univ., Hamilton, ON, Canada, 1988.
38. I. Yellowley, "Observations on the mean values of forces, torques and specific power in the peripheral milling process," Int. J. Mach. Tool Des. Res., vol. 25, no. 4, pp. 337-346, 1985.
39. Y. Altintas, "Process monitoring and tool breakage recognition in milling," Ph.D. dissertation, McMaster Univ., Hamilton, ON, Canada, 1986.