Design, implementation, and testing of miniaturized electromagnetic bandgap structures for broadband switching noise mitigation in high-speed PCBs

IEEE Transactions on Advanced Packaging

Volumn 30, Issue 2, 2007, Pages 171-179

  Shahparnia, Shahrooz ^a   Ramahi, Omar M ^b  

^a UNIVERSITY OF MARYLAND   (United States)

^b UNIVERSITY OF WATERLOO   (Canada)

Author keywords

Electromagnetic bandgap structures; Electromagnetic noise; Electronic packages; High impedance surfaces; Printed circuit boards (PCBs); Switching noise

Indexed keywords

CMOS INTEGRATED CIRCUITS; ELECTRIC NETWORK TOPOLOGY; ELECTROMAGNETS; POWER SUPPLY CIRCUITS; PRINTED CIRCUIT BOARDS; SEMICONDUCTOR DEVICE STRUCTURES; THRESHOLD VOLTAGE;

ELECTROMAGNETIC BANDGAP STRUCTURES; ELECTROMAGNETIC NOISE; EMBEDDING ELECTROMAGNETIC BANDGAP (EBG); HIGH IMPEDANCE SURFACE; POWER DISTRIBUTION NETWORKS; SWITCHING NOISE;

ENERGY GAP;

EID: 34249811500     PISSN: 15213323     EISSN: None     Source Type: Journal    
DOI: 10.1109/TADVP.2007.895612     Document Type: Conference Paper

References (40)

1. E. J. Nowak, "Maintaining the benefits of CMOS scaling when scaling bogs down," IBM J. Res. Develop., vol. 46, no. 2/3, pp. 169-180, 2002.
2. D. J. Frank, "Power-constrained CMOS scaling limits," IBM J. Res. Develop., vol. 46, no. 2/3, pp. 235-244, 2002.
3. S. H. Hall, G. W. Hall, and J. A. McCall, High-Speed Digital System Design: A Handbook of Interconnect Theory and Design Practices, 1st ed. Piscataway, NJ: IEEE, Jan. 2000.
4. R. Senthinatan and J. Price, Simultaneous Switching Noise of CMOS Devices and Systems. Boston, MA: Kluwer, 1994.
5. M. Leone, "The radiation of a rectangular power bus structure at multiple cavity-mode resonances," IEEE Trans. Electromagn. Compat. vol. 45, no. 3, pp. 486-492, Aug. 2003.
6. V. Ricchiuti, "Power-supply decoupling on fully populated high-speed digital PCBs," IEEE Trans. Electromagn. Compat., vol. 43, no. 4, pp. 671-676, Nov. 2001.
7. S. Radu, R. E. DuBroff, J. L. Drewniak, T. H. Hubing, and T. P. VanDoren, "Designing power bus decoupling for CMOS devices," in Proc. IEEE Int. Symp. Electromagn. Compat., Denver, CO, Aug. 23-28, 1998, vol. 1, pp. 375-380.
8. V. Ricchiuti, "Power bus signal integrity improvement and EMI mitigation on multilayer high-speed digital PCBs with embedded capacitance," IEEE Trans. Mobile Comput., vol. 2, no. 4, pp. 314-321, Oct.-Dec. 2003.
9. M. Xu, T. H. Hubing, J. Drewniak, T. VanDoren, and R. E. DuBroff, "Modeling printed circuit boards with embedded decoupling capacitance, in Proc. IEEE Int. Symp. Electromagn. Compat., Montreal, ON, Canada, Aug. 13-17, 2001, pp. 515-520.
10. I. Novak, "Reducing simultaneous switching noise and EMI on ground/ power planes by dissipative edge termination," IEEE Trans. Adv. Packag., vol. 22, no. 3, pp. 274-283, Aug. 1999.
11. T. M. Zeeff and T. H. Hubing, "Reducing power bus impedance at resonance with lossy components," IEEE Trans. Adv. Packag., vol. 25, no. 2, pp. 30-310, May 2002.
12. T. Hubing, J. Chen, J. Drewniak, T. Van Doren, Y. Ren, J. Fan, and R. E. DuBroff, "Power bus noise reduction using power islands in printed circuit board designs," in Proc. Int. Symp. Electromagn. Compat., Seattle, WA, Aug. 2-6, 1999, pp. 1-4.
13. X. Ye, D. M. Hockanson, M. Li, Y. Ren, W. Cui, J. L. Drewniak, and R. E. DuBroff, "EMI mitigation with multilayer power bus stacks and via stitching of reference planes," IEEE Trans. Electromagn. Compat., vol. 43, no. 4, pp. 538-548, Nov. 2001.
14. T. Kamgaing and O. M. Ramahi, "High-impedance electromagnetic structures for parallel-plate mode suppression in high-speed digital systems," in Proc. 11th Topical Meeting Electrical Performance Electronic Packag., Oct. 21-23, 2002, pp. 279-282.
15. R. Abhari and G. V. Eleftheriades, "Suppression of the parallel-plate noise in high-speed circtuits using metallic electromagnetic band-gap structures," in IEEE MTT-S Int. Microw. Symp. Dig., Seattle, WA, Jun. 2-7, 2002, pp. 493-496.
16. T. Kamgaing and O. M. Ramahi, "A novel power plane with integrated simultaneous switching noise mitigation capability using high impedance surface," IEEE Microw. Wireless Compon. Lett., vol. 13, no. 1, pp. 21-23, Jan. 2003.
17. R. Abhari and G. V. Eleftheriades, "Metallo-dielectric electromagnetic bandgap structures for suppression and isolation of the parallel-plate noise in high-speed circuits," IEEE Trans. Microw. Theory Tech., vol. 51, no. 6, pp. 1629-1639, Jun. 2003.
18. S. Shahparnia and O. M. Ramahi, "Electromagnetic interference (EMI) reduction from printed circuit boards (PCB) using electromagnetic bandgap structures," IEEE Trans. Electromagn. Compat., vol. 46, no. 4, pp. 580-587, Nov. 2004.
19. S. Van den Berghe, F. Olyslager, D. De Zutter, J. De Moerloose, and W. Temmerman, "Study of the ground bounce caused by power plane resonances," IEEE Trans. Electromagn. Compat., vol. 40, no. 2, pp. 111-119, May 1998.
20. S. Chun, M. Swaminathan, L. D. Smith, J. Srinivasan, Z. Jin, and M. K. Iyer, "Modeling of simultaneous switching noise in high speed systems," IEEE Trans. Adv. Packag., vol. 24, no. 2, pp. 132-142, May 2001.
21. S. Chun, M. Swaminathan, L. D. Smith, J. Srinivasan, Z. Jin, and M. K. Iyer, "Physics based modeling of simultaneous switching noise in high speed systems," in Proc. 50th Electronic Components Technol. Conf. Las Vegas, NV, May 21-24, 2000, pp. 760-768.
22. D. K. Cheng, Field and Wave Electromagnetics, 2nd ed. Englewood Cliffs, NJ: Prentice Hall, 1989.
23. D. A. Frickey, "Conversion between S, Z, Y, h, ABCD, and T parameters which are valid for complex source and load impedance," IEEE Trans. Microw. Theory Tech., vol. 42, no. 2, pp. 205-211, Feb. 1994.
24. D. Sievenpiper, L. Zhang, R. F. J. Broas, N. G. Alexopolous, and E. Yablonovitch, "High-impedance electromagnetic surfaces with a forbidden frequency band," IEEE Trans. Microw. Theory Tech., vol. 47, no. 11, pp. 2059-2074, Nov. 1999.
25. S. Shaliparnia and O. M. Ramahi, "Simultaneous switching noise mitigation in high-speed printed circuit boards using cascaded high-impedance surfaces," presented at the 46th IEEE Midwest Symp. Circuits Syst., Cairo, Egypt, Dec. 28-30, 2003.
26. S. Shahparnia, B. Mohajer-Iravani, and O. M. Ramahi, "Electromagnetic noise mitigation in high-speed printed circuit boards and packaging using electromagnetic bandgap structures," in Proc. 54th Electron. Compon. Technol. Conf., Las Vegas, NV, Jun. 1-4, 2004.
27. S. Shahparnia and O. M. Ramahi, "Miniaturized electromagnetic bandgap structures for ultra-wide band switching noise mitigation in high-speed printed circuit boards and packages," presented at the 13th Topical Meeting Elect. Perform. Electron. Packag., Portland, OR, Oct. 25-27, 2004.
28. O. M. Ramahi, V. Subramanian, and B. Archambeault, "Simple and efficient finite-difference frequency-domain algorithm for study and analysis of power plane resonance and simultaneous switching noise in printed circuit boards and chip packages," IEEE Trans. Adv. Packag. vol. 26, no. 2, pp. 191-198, May 2003.
29. High Frequency Structure Simulator (HESS). ver. 9.0, Ansoft, Pittsburgh, PA.
30. R. T. Remski, "Analysis of Photonic bandgap surfaces using Ansoft HFSS," Microw. J., vol. 43, no. 9, pp. 190-198, Sep. 2000.
31. L. Brillouin, Wave Propagation in Periodic Structures, Electric Filters and Crystal Lattices. New York: McGraw-Hill, 1946.
32. T. Kamgaing and O. M. Ramahi, "Design and modeling of high-impedance electromagnetic surfaces for switching noise suppression in power planes," IEEE Trans. Electromagn. Compat., vol. 47, no. 3, pp. 479-489, Aug. 2005.
33. S. Shahparnia and O. M. Ramahi, "Simple and accurate circuit models for high-impedance surfaces embedded in printed circuit boards, presented at the IEEE Antennas Propag. Soc. Int. Symp., Monterey, CA, Jun. 20-26, 2004.
34. M. Rahman and M. A. Stuchly, "Transmission line-periodic circuit representation of planar microwave photonic bandgap structures," Microw. Opt. Technol. Lett., vol. 30, no. 1, pp. 15-19, Jul. 5, 2001.
35. R. E. Collin, Foundations for Microwave Engineering, 2nd ed. New York: Wiley, 1992.
36. S. Clavijo, R. E. Diaz, and W. E. McKinzie, III, "Design methodology for Sievenpiper high-impedance surfaces: An artificial magnetic conductor for positive gain electrically small antennas," IEEE Trans. Antennas Propag., vol. 51, no. 10, pp. 2678-2690, Oct. 2003.
37. D. M. Pozar, Microwave Engineering, 2nd ed. Boston, MA: Addison Wesley, 1998.
38. S. Shahparnia and O. M. Ramahi, "A simple and effective model for electromagnetic bandgap structures embedded in printed circuit boards," IEEE Microw. Wireless Compon. Lett., vol. 15, no. 10, pp. 621-623, Oct. 2005.
39. S. D. Rogers, "Electromagnetic-bandgap layers for broad-band suppression of TEM modes in power planes," IEEE Trans. Microw. Theory Tech., vol. 53, no. 8, pp. 2495-2505, Aug. 2005.
40. S. Shahparnia and O. M. Ramahi, "Simultaneous switching noise mitigation in printed circuit boards using cascaded high-impedance surfaces," Electron. Lett., vol. 40, no. 2, pp. 98-99, Jan. 22, 2004.