Reviews on drying: 1982-2006

Drying Technology

Volumn 25, Issue 1, 2007, Pages 19-28

  Hall, Carl ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 33847636723     PISSN: 07373937     EISSN: 15322300     Source Type: Journal    
DOI: 10.1080/07373930601152616     Document Type: Review

References (435)

1. Sharp, J. R. (1982) A review of low-temperature drying simulation models. Journal of Agricultural Engineering Research, 27:3, pp. 169-190.
2. Garcia, C. E. and Morari, M. (1982) Internal model control (of dryer). 1. A unifying review and some new results. Industrial and Engineering Chemistry Process Design and Development, 21, pp. 308-323.
3. Mujumdar, A. S. (1982) Recent developments in paper drying. Appita Journal, 19:1, pp. 72-76.
4. Sharp, J. R. (1982) A review of low temperature drying simulation models. Journal of Agricultural Engineering Research, 27:3, pp. 169-190.
5. Potthast, K. (1982) Physical and chemical processes in the drying of meat products. Fleischwirtschaft, 62:1, pp. 30-34.
6. Li, R. (1982) Microencapsulation by the spray-drying process. Zhongcaotao, 13:1, pp. 16-20.
7. Menon, A. and Mujumdar, A. S. (1982) Energy savings in the drying of solids. Indian Chemical Engineer, 24:2, pp. 8-13.
8. Mann, E. W. (1982) Possible use of heat pumps in drying and evaporative concentration. Elektrowaerme International, Edition B, 40:3, p. l77.
9. Chirife, J. (1982) Fundamental aspects of osmotic drying of fruits. Anales de la Asociacion Quimica Argentina, 70:5, pp. 913-932.
10. Iglesias, H. A. and Chirife, J. (1982) Handbook of Food Isotherms, pp. 262-335. Academic Press, New York
11. Yanai, T. (1983) Recovery and concentration of aroma constituents in evaporation and drying of food. Nippon Shokuhin Kogyo Gakkaishi, 26:6, pp. 26-29.
12. Yamada, K. and Hamand, S. (1982) Adsorbents for moisture removing. Kagaku Sochi, 24:8, pp. 34-39.
13. Chatterjee, A. and Nichat, B. M. (1982) Drying in fluidized bed - A review of recent developments. Chemical Age of India, 33:9, pp. 483-486.
14. Kawashima, Y. (1982) Preparation of microcapsules by spray drying method. Shikizai Kyokaishi, 55:9, pp. 657-666.
15. Saida, T. and Michiki, H. (1982) Unit operations (drying). Kagaku Gijutsushi Mol, 20:11, pp. 57-63.
16. Trisvyatskii, L. A. and Zakladno, G. L. (1982) Reduction in loss of grain. Zashch Rast (Moscow), 6, pp. 20-22.
17. Stanmore, B., Baria, D. and Paulson, L. E. (1982) Steam Drying of Lignite: A Review & Processes and Performance, Grand Forks Energy Technology Center (DOE) Report
18. Petersohn, G. (1982) Remaflam, the possibility of using alternative energy. TPI, Text Praxis International, 37:10, pp. 1062-1070.
19. Yamaguchi, H. (1982) Dry grinding of coal. Funtai to Kogyo, 14:11, pp. 29-39.
20. Slobodkin, L. S. (1982) Thermophysics of thermal-convection curing of filled polymer systems on substrates. Metody Rascheta Issled Tepla-Massoperenosa Sush.-Term. Protsessakh (USSR), pp. 33-44.
21. Rouette, H. K. and Kittan, G. (1982) Guide to the textile production of wool fabrics at the finishing stage. TPI, Text Praxis International, 37:11, pp. 1174-1176.
22. McGinnis, N., Scheppan, J., Popovich, G. and Rightmire, C. (1982) Proceedings-Intersociety Energy Conversion Engineering Conference, pp. 1049-1054.
23. Yoshimori, T. (1982) Drying and weighing of primary standard reagents for titrimetric analysis. Bunseki Kagaku, 31:11
24. Ikumi, T. (1982) Use of low rank coal. Funtai to Kogyo, 14:11, pp. 75-84.
25. Hirosue, H. and Shinohara, H. (1982) Drying '82, pp. 36-41. McGraw-Hill Hemisphere, New York
26. Leszcynski, Z. (1982) Basic research woi1s and practical achievements in specialized areas of chemical engineering and equipment. Przem. Chem., 61:8, pp. 228-232.
27. Chatterji, S. (1982) Probable mechanisms of crack formations at early ages of concretes: A literature survey. Cement and Concrete Research, 12:3, pp. 371-376.
28. Satas, D. (1982) Handbook of Pressure - Sensitive Adhesives Technology, pp. 533-557. Van Nostrand Reinhold, New York
29. Perkin, R. M. (1983) The drying of porous materials with electromagnetic energy generated at radio and microwave frequencies. Prog. Filtr. Sep., 3, pp. 205-266.
30. Reed, A. R. and Duffell, C. H. (1983) A review of hopper discharge aids. Bulk Solids Handing, 3:1, pp. 149-156.
31. Narayanan, P. V. (1983) Corrosion prevention in packaging (including drying). Corros Maint., 6:1, pp. 29-39.
32. Choi, Y. and Okos, M. R. (1983) Thermal Properties of Liquid Food - Review
33. Karel, M. and Fink, J. M. (1983) Advances in Drying, Vol. 2, pp. 103-153. Hemisphere, New York
34. Gupta, R. and Mujumdar, A. S. (1983) Advances in Drying, Vol. 2, pp. 155-192. Hemisphere
35. Strumillo, C. and Markowski, A. (1983) Advances in Drying, Vol. 2, pp. 193-232. Hemisphere, New York
36. (1983) Control Techniques for Organic Emissions from Plywood Veneer Changes
37. Grafton, R. W. (1983) Ignition/explosion risks in fluidized dryers-Avoidance and containment (Practical aspects - A user's viewpoint). Inst. Chem. Eng. Symp. Ser., 82:3, pp. E44-E52.
38. Przesmyecki, Z. and Strumillo, C. (1983) Mechanism of moisture migration in drying capillary-porous materials. Inz. Chem. Proc., 4:2, pp. 365-370.
39. Tutova, E. G. (1983) Use of a fluidized bed for the dehydration of labile heterogeneous systems. Prom. Teplotekh, 5:6, pp. 38-44.
40. O'Neill, K. (1983) The physics and mathematical frost heave models: A review. Cold Regions Science and Technology, 6, pp. 275-291.
41. Mujumdar, A. S. (1983) Aerodynamics, heat transfer and drying in vibrated fluidized beds. Rev. Latinoam. Transferencia Calor Mater, 7:1, pp. 99-110.
42. Barratt, J. C. (1983) Bactericides for pro-treatment in suspension drying of hides and skins - A review. Journal of the Society of Leather Technologies and Chemists, 67:2, pp. 31-40.
43. Hallstrom, A. (1983) Drying - An energy-consuming operation. Kem. Tidikr, 95:2, pp. 30-34.
44. Gorski, W. and Ostaszewski, W. (1983) Removal of water from fuels for aircraft turbine engines by the coalescence method. Tech. Lotnicza Astronaut, 38, pp. 23-29.
45. Funaoka, K. (1983) Drying of dangerous substances and safety countermeastures. Kagaku Gijutsushi Mol., 21:3, pp. 45-52.
46. Chatterjee, A. and Narajari, N. W. (1983) Processes for dehydration of natural gas. Chemical Engineering World (CEW), 18:4, pp. 34-40.
47. Kwai, S. (1983) Design of dryers. Kemikaru Enjiniyaringu, 28:4, pp. 262-267.
48. Darmstadt, W. J. (1983) Technology review: Drying and burning of wood fiber fuels. Pulp & Paper, 57:6, pp. 131-134.
49. Yosthida, T. (1983) Diffusion and retention of flavor components in drying liquid food. Shokuhin Kogyo, 26:6
50. Sugisawa, H. and Takahashi, H. (1983) The technical problems for aroma constituent retention in food processing. Shokuhin Kogyo, 26:6, pp. 20-25.
51. Sinn, A. (1983) Technology and application of thin film dryer equipment. Tech. Film Appl. Oper. Genie Chim. Colloq. Int. pp. 441-464.
52. Simpson, W. T. (1983) Drying wood: A review - Part I. Drying Technology, 2:2, pp. 235-264.
53. Hedrick, T. I. (1983) Reverse osmosis and ultrafiltration in the food industry: Review. Drying Technology, 2:3, pp. 329-352.
54. Simpson, W. T. (1983) Drying wood: A review - Part II. Drying Technology, 2:3, pp. 353-368.
55. Roe, C. H. (1899) Review of Desliming Methods and Equipment
56. Kirk, L. A. (1984) Advances in Drying, Vol. 3, pp. 1-37. Hemisphere, Washington
57. Richard, P. and Raghavan, G. S. V. (1984) Advances in Drying, Vol. 3, pp. 39-70. Hemisphere, Washington
58. Pakowski, Z., Mujumdar, A. S. and Strumillo, C. (1984) Advances in Drying, Vol. 3, pp. 245-306. Hemisphere, Washington
59. Basmadjian, D. (1984) Advances in Drying, Vol. 3, pp. 307-357. Hemisphere, Washington
60. Deshpande, S. S., Cheryan, M., Sathe, S. K. and Salunkhe, D. K. (1984) Freeze concentration of fruit juices. CRC Critical Reviews in Food Science & Nutrition, 20:3, pp. 173-248.
61. Michell, A. (1984) Press drying of paper - Overview. Appita Journal, 37, pp. 325-329.
62. Dronet, M. G. (1984) Plasma Technology: A Review of the State of the Art, Canadian Electrical Association
63. Mujumdar, A. S. (1984) Drying, pp. 151-157. Hemisphere McGraw-Hill, New York
64. Ishiguro, K. (1984) Chemical problems in drying wet paper. Kami Parupu Gijutsu Taimusu, 27:3, pp. 59-64.
65. Kawashima, V. (1984) Microencapsulation by spray drying. Funtai to Kogyo, 16:5, pp. 30-40.
66. Norwig, J. F. and Thompson, D. R. (1984) Review of dehydration during freezing. Transactions of the ASAE, 27:5, pp. 1619-1624.
67. Nagase, Y. (1984) Technology for the treatment of powder by wet method. Funtai to Kogyo, 16:6, pp. 36-41.
68. Yu, H. (1984) Vibrating fluidized bed dryer. Huaxue Shijie, 25:5, pp. 186-188.
69. Suzuki, K. (1984) Application of pressure swing adsorption to drying. Kemikaru Enginiyaringu, 29:7, pp. 543-548.
70. Wakeman, R. J. (1984) Residual saturation and dewatering of fine coals and filter cakes. Powder Technology, 40:1, pp. 53-63.
71. Worsley, W. G. and Highley, J. (1984) Coal-fired fluidized bed furnaces applied to drying and thermal processing plants. URJA, 15:2, pp. 109-112.
72. Vancells, B. J. (1984) Continuous weigh feeding. Ing. Quim. (Madrid), 16:183, pp. 35-39.
73. Zeidler, R. (1984) Increased productivity and savings in energy in resin finishing - A qualitative review. Melliand Textilber, 65:2, pp. 127-132.
74. Tajiri, M. (1984) Treatment of the offensive odor wastegas in drying process. Kami to Purasucikke, 12:9, pp. 25-31.
75. Parry, J. L. (1985) Mathematical modeling and computer simulation of heat and mass transfer in agricultural grain drying: A review. Journal of Agricultural Engineering Research, 32:1, pp. 1-29.
76. King, C. J. (1984) Control of food-quality factors in spray drying. Proceedings of the 4th International Drying Symposium (IDS), 1, pp. 69-76.
77. Reay, D. (1984) Modeling continuous convection dryers for particulate solids - Progress and problems. Proceedings of the 4th International Drying Symposium (IDS), 1, pp. 77-84.
78. Poulsen, K. P. and Rubin, J. (1984) Drying of foods with flue gas from natural gas risk/benefit. Proceedings of the 4th International Drying Symposium (IDS), 1, pp. 300-304.
79. Muralidhara, H. S., Ensminger, D. and Putnam, A. (1985) Acoustic dewatering and drying (low and high frequencies): State of the art review. Drying Technology, 3:4, pp. 529-566.
80. Upadhyaya, R. L. and Kilara, A. (1984) Drying heat-sensitive products. Proceedings of the 4th International Drying Symposium (IDS), 1, pp. 316-321.
81. Malsy, H. (1984) Explosion protection during drying and heating of solvent-containing substances. Chem.-Anlagen Verfahren, 9, p. 136.
82. Rabe, M. (1984) Compressed air processing. Chem.-Anlagen Verfahren, 11, pp. 27-29.
83. Phelps, J. M. (1984) Spray drying ceramics. Ceramic Engineering and Science Proceedings, 5:11, pp. 1004-1011.
84. Kreusing, H. and Treutlein, G. (1984) Use of brown coal dust in large water space boilers and drying plants. Braunkohle (Duesseldorf), 36:12, pp. 438-442.
85. Osborne, D. G. (1984) Coal fines dewatering. Trans. Am. Inst. Min. Metall. Pet. Eng., Soc. Min. Eng. AIME, 276, pp. 1853-1849.
86. Masiuk, S. (1984) Progress in application of the vibrational techniques in chemical technology. Pr. Nauk. Politech. Szezecin, 270, pp. 5-22.
87. Anon Ser., Gazov. Prom-st. and Podgot, Pererab. (1985) Experience with the use of propylene glycol as a hydrate formation inhibitor in field treatment of natural gas. Gaza. Gazov. Kondens., 1
88. Anon Ser., Gazov. Prom-st. and Podgot, Pererab. (1985) Regeneration of absorbents. Gaza. Gazov. Kondens., 3
89. Anon Ser., Gazov. Prom-st. and Podgot, Pererab. (1985) Status of technology for collection and treatment of some condensates prior to transport. Gaza. Gazov. Kondens., 6
90. Hewitt, G. F., Costigan, G. and Lee, D. H. (1985) UK Studies of Post - Dryout Heat Transfer, U.K. Atom. Energy
91. Igawa, K. (1985) Adsorption separation using synthetic zeolites. Toyo Soda Kenkyu Hokoku, 219:2, pp. 161-167.
92. Qing, T. (1985) Dehydration and drying post treatment of electrodeposits. Diandu Yu Huanbao, 5:3, pp. 15-19.
93. Back, E. L. (1985) Press drying compared to other means of densifying paper. TAPPI Journal, 68:3, pp. 92-96.
94. Weston, J. D. W. (1985) Press drying - A technology for tomorrow. Pap. Technol. Ind., 26:4, pp. 199-203.
95. Bukowiecki, S. and Laube, K. (1985) Modern adsorbents. Epitoanyag, 37:5, pp. 146-150.
96. Asaeda, M. (1985) Gas separation with inorganic porous solid membranes. Maku, 10:5, pp. 197-304.
97. Houck, D. L. (1985) Spray drying in the metals industries. Journal of Metals, 37:6, pp. 24-27.
98. Smith, G. A. (1985) Use of dielectric heating in textiles and chemical reactions. Proc. 7th Int. Wool Text. Res. Conf., 5:21, pp. 1-220.
99. Weston, J. D. W. and Guest, D. A. (1985) The importance of cell wall structure in recycling fibers. Paper Technology, 26:7, pp. 309-312.
100. Ismail, A. (1985) Technical and economic options for preparation of peat fuels using wet-mined slurried feedstock. Trop. Peat Resources - Prospects Potential, Proceed. Symp. pp. 253-294.
101. Kayaa, A. (1985) On the control and optimization of fluidized beds for chemical processing and steamgeneration to conserve energy. IFAC Proc. Sec., pp. 1985-1990.
102. Miles, L. W. C. (1985) The drying of textile materials. Review of Progress in Coloration and Related Topics, 15, pp. 21-24.
103. Youlal, H. (1985) pp. 3327-3335.
104. Tapekhin, A. Y. and Kozlova, Z. A. (1985) Calculation of pneumatic pipes for drying of phosphozypsium. Tr. Nll po Udobr. I Insektofungitsidan, 248, pp. 86-96.
105. Lehtinen, J. A. (1986) A. critical review of the conventional hot platen pressing method of laboratory press drying. Drying Technology, 4:2, pp. 183-215.
106. Keey, R. B. (1986) Recent progress in solids processing: Some current developments in drying. Chemical Engineering Research and Design, 64:2, pp. 83-88.
107. Liu, C. (1986) Molecular sieve drying agent for refrigerators. Huaxue Shijie, 27:2, pp. 83-84.
108. Youngs, R. (1986) The improved energy efficiency of modern spray dryers. Journal of Heat Recovery Systems, 6:3, p. 2l7.
109. Herron, D. J., Hummel, D. and McCormick, P. Y. (1986) Encyclopedia Polym. Sci. Eng., pp. 173-203. John Wiley & Sons, New York
110. Mizutani, E., Sasaki, N., Inoue, T. and Ito, S. (1986) Development of fluidized vibro-dryer. Kagaku Kogaku, 50:6, pp. 382-386.
111. Von Chiari, B. (1986) Investigations on drying sensitivity - A survey (review). Ceramic Forum International, 63:7, pp. 410-413.
112. Cui, W. K. and Mujumdar, A. S. (1986) Drying of Solids, pp. 142-156. Halsted Press, New York
113. Hasan, M. and Mujumdar, A. S. (1986) Drying of Solids, pp. 291-316. Halsted Press, New York
114. Barnes, H. M. and Winandy, J. D. (1986) Effects of seasoning and preservation on the properties of treated wood. Proceedings - Annual Meeting, American Wood Preservers' Association, 82, pp. 95-195.
115. Van, A.G.F. Dender, Baldinin, V. L. S. and Maria, E. De Melo (1986) Effect of dehydration on the quality of food proteins. Bol. Inst. Technol. Aliment., 23:2, pp. 147-168.
116. Ivashchenko, V. F., Bosov, G. P., Todorova, L. A. and Grebenyuk, V. D. (1986) Desalting of diethylene glycol solutions in gas-industry installations. Gazov. Prom-st., Ser.-Podgot. Pererab., Gaza Gazov. Kondens, (Obz. inf.), 3
117. Chabinsky, I. J. and Eves, E. E. (1986) The application of microwave energy in drying, calcining and firing of ceramics. Interceram, 35:6, pp. 30-32.
118. Radic, I. (1986) Use of solid fuels in the cement industry. Kem. Ind., 35:7, pp. 393-400.
119. Hahn, C., Salzburg, D. and Westmark, H. (1986) Effect of organic binders on spray-dried granulates I. The binder-body system. Keram. Z, 38:12, pp. 747-749.
120. Konovalov, V. I. (1986) Basic kinetic characteristics of mass transfer processes (drying). Zh. Prikl. Khim (Leningrad), 59:9, pp. 2096-2107.
121. Ohkawara, M. (1986) Ultrafine particles and drying-granulation process. Kagaku Gijutsushi Mol, 24:9, pp. 45-48.
122. Nakamura, M. (1986) Drying apparatus. Kagaku Gijutsushi Mol, 24:9, pp. 65-69.
123. Burkinshaw, S. M. (1986) Textile applications of dielectric heating. Colour. Ann. pp. 83-88.
124. Parrish, W. R., Won, K. W. and Baltatu, M. E. (1986) Phase behavior of the triethylene glycol-water system and dehydration/regeneration design for extremely low dew point requirements. Proc. Annu. Conv. Gas Process. Assoc. (65th), pp. 202-210.
125. Kasiyamm, S. (1987) Application of functional thin film. Denki Kagaku oyobi Kogyo Butsuri Kagaku, 55:2, pp. 106-110.
126. Romankov, P. R. (1987) Development of the theory and practice of drying and adsorption processes. Teor. Osn. Khim. Tekhnol., 21, pp. 35-43.
127. Barrett, J. C. and Leach, I. B. (1987) Hide rehydration difficulties associated with adverse drying conditions. Tropical Science, 27:2, pp. 135-144.
128. Hartley, J. A. G. (1987) Advances in Drying, Vol. 4, pp. 199-248. Hemisphere, New York
129. Passos, M. L., Mujumdar, A. S. and Vijaya, G. S. (1987) Advances in Drying, Vol. 4, pp. 359-397. Hemisphere, Washington
130. Back, E. L. (1987) Advances in Drying, Vol. 4, pp. 399-416. Hemisphere, Washington
131. (1987) J.R. Design of liquid desiccant and dehumidification and cooling systems. NATO ASI Series E - Applied Sciences, 129, pp. 374-387.
132. Flyate, D. M. (1987) Bound water in paper manufactured from plant fibers. Bum. Prom-st., 3, pp. 11-12.
133. Kawai, S. (1987) Continuous horizontal fluidized-bed dryer. Kagaku Kogaku, 51:2, pp. 143-148.
134. Rosenberg, U. and Boegle, W. (1987) Microwave-systems - New industrial food technology. GIT Fachz. Lab., 31:3, pp. 162-164.
135. Wedzicha, B. L. (1987) Review: Chemistry of sulfur dioxide in vegetable dehydration. International Journal of Food Science and Technology, 22:5, pp. 433-450.
136. Goelker, C. (1987) Drying of biotechnological products. Biotech Forum, 4:4, pp. 158-166.
137. Mujumdar, A. S. (1987) Spouted bed technology: A brief review. Chemical Age of India, 38, pp. 589-594.
138. Ohtsuki, M. (1987) Drying by far IR-heating. Kemikaru Enjiniyaringu, 32, pp. 64-69.
139. Klinzing, G. E., Rohatgi, N. D., Zaltash, A. and Myler, C. A. (1987) Pneumatic transport - A review: Generalized phase diagram approach to pneumatic transport. Powder Technology, 51, pp. 135-149.
140. Siratin, S. A. and Bergo, B. G. (1987) Present status of membrane technology for separation of gases. Gazov. Prom-st., Ser.-Podgot., Pererab. Gaza Gazov. Kondens., 3
141. Osipov, L. A., Dreijers, I. and Lielgalvis, M. (1987) Development and introduction of highly effective dryer. Latv. PSR Zinat. Akad. Vestis. Kim. Ser., 2, pp. 243-249.
142. Turevskii, E. N. (1987) Drying technology for compressed gas used as fuel. Gazov. Prom-st., Ser.-Podgot Pererab. Gaza Gazov. Kondens (Obz. Inf.), 1
143. Takashimo, H. (1987) Far-infrared radiation materials and their utilization. Kino Zairyo, 7:7, pp. 73-84.
144. Wiederhold, P. R. (1987) Drying '87, pp. 278-286. Hemisphere, Washington
145. Fohl, J., Lugsemeiswer, W. and Wallner, K. (1987) Removal of water from brown coal. Part I-Principles and drying method. Braunkohle, 39:3, pp. 46-50.
146. Parrott, L. (1987) Measurement and modeling of porosity in drying cement paste. Materials Research Society Symposium Proceedings (UK), 85, pp. 91-104.
147. Marutzky, R. (1987) The limits of reducing emissions of wood chip driers with respect to the new specifications of TA Luft. Holz Roh-Werkst, 45:10, pp. 421-427.
148. Schluender, E. U. (1987) Selective drying of mixture-containing products. Chemie Ingenieur Technik, 59:11, pp. 823-833.
149. Sunderland, J. G. (1987) Electrokinetic dewatering and thickening. I. Introduction and historical review of electrokinetic applications. Journal of Applied Electrochemistry, 17:5, pp. 889-898.
150. Richter, E. (1987) Industrial processes for gas separation by pressure swing adsorption. Part 2: Process (A review). Erdol Kohle, Erdgas, Petrochem., 40:10, pp. 432-438.
151. Rakowski, W. (1987) Textile drying with high-frequency current. Tech. Wlok., 36:3, pp. 77-80.
152. Siwek, R. (1987) Explosive protection in the chemical and pharmaceutical industries. Pharm. Ind., 49:11, pp. 1165-1175.
153. Ono, S. and Harada, T. (1987) Development of water vapor separation membrane technique. JETI, 35:10, pp. 44-48.
154. King, F. and Kaolar, M. (1987) Corrosion of Copper Containers Prior to Saturation of a Nuclear Fuel Waste Disposal Vault, pp. 1-33. Atomic Energy of Canada Ltd.
155. Kjaergaard, J. G. (1988) Concentration and drying of whey and permeates. Bull. Int. Dairy Fed., 233, pp. 4-20.
156. Hotta, M. (1988) Development of polyimide fibers and their application to gas separation. Kagaku Keizai, 35:7, pp. 20-25.
157. Muralidhara, H. S. (1988) The combined fields approach to separations. Chemtech, 18:4, pp. 229-235.
158. Jones, D. M. (1988) Controlling particle size and release properties. Secondary processing techniques. ACS Symposium Series (American Chemical Society), 370, pp. 158-176.
159. Scherer, G. W. (1988) Drying of gels. Journal of Non-Crystalline Solids, 100:1, pp. 77-92.
160. Wagner, C. (1988) Measures for optimized drying of heavy clay products. Part 2. Ceramic Forum International, 65:1, pp. 26-29.
161. Sillem, H. and Schnabel, U. (1988) Fine processing of high-quality clays using vertical roller mills and three-tube dryers. Ceramic Forum International, 65:1, pp. 503-509.
162. Lima, F. L. C. (1988) Systems for drying biomass - Alternative fuel for auxiliary boilers of lime kilns. Papel, 49:10, pp. 49-59.
163. Mitev, D., Kovachev, P., Dolkov, I. and Rusev, D. (1988) Intensification of processes in fluidized beds. Khim. Ind., 60:9, pp. 408-410.
164. Takeuchi, H., Niwa, T., Hind, T. and Kawashima, Y. (1988) Particulate preparations and designs by spray-drying techniques. Pharm. Tech. Japan, 4:12, pp. 1472-1479.
165. O'Ferrall, R.A. More (1988) Elimination reactions. Organic Reaction Mechanisms, pp. 343-360.
166. Mittal, R. M. and Shah, R. K. (1988) Vacuum extraction-technology and its application. Colourage, 35:5, pp. 15-19.
167. Okoniewski, M. (1988) Processes and equipment for drying and dewatering. II. Drying. Tech. Wlok., 37:12, pp. 369-373.
168. Kropholler, H. W. (1989) Review of world pilot-plant paper-machines. Paper Technology, 30:3, pp. 30-38.
169. Eichner, K. (1989) Conservation of the physiological nutrition and sensory quality in the drying of food. Lebensmittelchem. Lebensmittelqual., 15, pp. 139-169.
170. Reay, D. A. (1989) Scientific approach to the design of continuous flow dryers for particulate solids. Multiphase Science and Technology, 4, pp. 1-102.
171. Danisch, L. A. (1989) Investigation of Electro - Osmosis and Its Application, Canadian Electricity Association, R&D: Montreal
172. Vyalkina, G. V., Saikin, V. V. and Zaitsey, N. Y. (1989) Drying of natural gas for automobile filling compressor stations. Gazov. Prom-st., Ser.: Podgot. Pererab. Gaza Gazov. Kondens (Obz. Inf.), 4
173. Lewicki, P. P. and Gwazda, D. (1989) Fundamentals of the retention of aeromatic components in the process of drying. Przem. Spozyw., 43:8, pp. 201-203.
174. Gecica, M. (1989) Drum dryers used in the building-material binder industry. Cem.-Wapoo-Gips, 7, pp. 136-143.
175. King, C. J. (1990) Spray drying food liquids and the retention of volatiles. Chemical Engineering Progress, 86:6, pp. 33-39.
176. Cohen, E. D., Lichtfoot, E. J. and Gutoff, E. A. (1990) A primer on forming coatings. Chemical Engineering Progress, 86:9, pp. 30-36.
177. Garcia, Fernandez R. and Rascom, Fernandez B. (1990) Study of the manufacture of acid-resistant ceramic materials. Part II. Drying and firing. Quimica e Industria, 36:5, pp. 439-443.
178. Nakamura, M. (1990) Automatic control for spray drying process of granular detergents. Zairyo Gijutsu, 8:6, pp. 193-198.
179. Depraetere, P. and Dameen, A. (1990) Dehydration by electrophoresis and electro-osmosis. Pharmaceutica Acta Helvetiae, 65:7, pp. 196-208.
180. Fresner, J. (1990) Dryer technology. Part I. Oesterr. Chem. Z., 91:11, pp. 374-378.
181. Moerl, L. (1990) Research and development of installations for fluidized-bed drying at the Department of Thermal Engineering at the Technical University of Magdeburg. Chem. Tech. (Leipzig), 42:5, pp. 185-191.
182. Scherer, G. W. (1990) Theory of drying. Journal of the American Ceramic Society, 73, pp. 3-14.
183. Scherer, G. W. (1990) Effect of inclusions on shrinkage. Materials Research Society Symposium Proceedings, 180, pp. 503-514.
184. Cardillo, P. (1990) Evaluation of the thermal instability of solids during drying. Riv. Combust., 44:1, pp. 1-10.
185. Yamamoto, Y. (1990) Solid-liquid separator with multiple functions. Kagaku Sochi, 32:11, pp. 32-36.
186. Damiecc, J., Kudra, T. and Strumillo, C. (1990) Drying of Solids, pp. 1-16. Sarita Prakashan, Meerut
187. Kudra, T., Mujumdar, A. S. and Melster, V. L. (1990) Drying of Solids, pp. 17-32. Sarita Prakashan, Meerut
188. Kumar, P. and Mujumdar, A. S. (1990) Drying of Solids, pp. 33-71. Sarita Prakashan, Meerut
189. McBratney, M., Raghavan, G. S. V. and Alikani, Z. (1990) Drying of Solids, pp. 72-78. Sarita Prakashan, Meerut
190. Kudra, T. (1990) Drying of Solids, pp. 79-95. Sarita Prakashan, Meerut
191. Koran, Z. (1990) Drying of Solids, pp. 96-113. Sarita Prakashan, Meerut
192. Chen, Z. (1990) Drying of Solids, pp. 114-135. Sarita Prakashan, Meerut
193. Jayas, D. S. (1990) Drying of Solids, pp. 197-207. Sarita Prakashan, Meerut
194. Smith, E. A. (1990) A review of field drying of grass. Drying Technology, 8:3, pp. 465-498.
195. Switka, J. and Krasowaki, Z. (1990) Use of water sorption isotherms in food technology. Przem. Spozya, 44, pp. 4-5.
196. Gehrmann, D. (1990) Developmental tendencies in drying technology in the chemical industry. Chemie Ingenieur Technik (CIT), 62:11
197. Uhlemann, H. (1990) Continuous fluidized bed spray granulation. Chemie Ingenieur Technik (CIT), 62:10, pp. 822-834.
198. Vosteen, B. (1990) Design of contact apparatus for heating or cooling of dry bulk solids. Chemie Ingenieur Technik, 62:11, pp. 960-961.
199. Bell, D. O., Seyed-Yagoobi, J. and Fletcher, L. S. (1990) A review of developments in paper drying. Heat Transfer Division (ASME), 129, pp. 157-164.
200. Kafarov, V. V., Men'shutina, N. V. and Dorokhov, I. N. (1990) Advances in drying technology. Zh. Vses. Khim. O-va im. D. I. Mendeleeva, 35:6, pp. 724-732.
201. Sokhansanj, S. and Cenkowski, S. (1990) Drying '89, pp. 276-287. Sarita Prakashan, Meerut
202. White, L. R. (1990) Water removal from hydraulic oil. Advances in Filtration and Separation Technology, 1, pp. 376-381.
203. Nederveen, C. J., Hoek, A.L. Van Schaik-Van and Dijkstra, J. J. F. M. (1991) Present theories on multi-cylinder paper drying. Paper Technology, 32:11, pp. 30-35.
204. Scherer, G. W. (1990) Theory of drying. Journal of the American Ceramic Society, 73, pp. 3-14.
205. Militzer, K. E. (1990) The rotary dryer. Chemical and Biochemical Engineering Quarterly, 41
206. Christiansen, A. (1991) How over drying wood reduces its bonding to phenol-formaldehyde: A critical review of the literature. Part II. Chemical reactions. Wood and Fiber Science, 23:1, pp. 69-84.
207. Grant, R. L. (1991) Drying pigment coated papers and boards - A review. Paper Technology, 32:3, pp. 20-23.
208. Back, E. L. (1991) Why is press drying/impulse drying delayed? A critical review. TAPPI Journal, 74:3, pp. 135-147.
209. Saprykin, V. L. (1991) Membrane gas separation. Khim. Tekhnol., 6, pp. 45-56.
210. Danziger, R. (1991) Removal of traces of water from solvents by pervaporation. Fett Wiss. Technol., 93:8, pp. 314-317.
211. Plass, L. (1991) Fluidized bed technology for gasification, combustion drying, and gas cleaning and their applications in power stations. VGB Kraftwerkstechnik, 71:3, pp. 184-191.
212. Didone, G. and Pollini, C. M. (1991) Inhibition of the Maillard reaction during pasta manufacture by the THT process. Getreide. Mehl. Brot., 45:7, pp. 216-219.
213. Bergholz, A. (1991) Tests carried out to explain the drying behaviour of ceramic bodies under conditions of steam raising drying. ZI: Ziegelindustrie International, 44:8, pp. 414-417.
214. George, D. E., Lightsey, G. R. and Wehr, A. G. (1991) Advantages of electromagnetic heating (and drying) in the plastics processing industry. TIZ Int. Mag. Powder Bulk, 115:3, pp. 102-105.
215. Lohmeyer, S. (1991) Phosphating detects from zinc and alkali phosphating baths. Their causes and avoidance. Part 7: Post rinsing and evaporation. Galvanotechnik, 82:9, pp. 3014-3022.
216. Kumazawa, E. and Taneya, S. (1991) Technology for drying heat-sensitive materials. Kagaku Sochi, 33:8, pp. 40-46.
217. Gromov, S. L. and Malyshev, R. M. (1991) Selection of a method for drying dispersed products. Khim. Prom-st (Moscow), 6, pp. 373-374.
218. Jayas, D. S., Cenkowski, S., Pabis, S. and Muir, W. E. (1991) Review of thin-layer drying and wetting equations. Drying Technology, 9:3, pp. 551-588.
219. Adams, G. D. J. (1991) Journal review: Freeze-drying of biological materials. Drying Technology, 9:4, pp. 891-925.
220. Panda, R. C. and Rao, V. S. R. (1991) Fluidized bed dryers. Chemical Engineering & Technology, 14:5, pp. 307-310.
221. Loch-Bowazzi, C. Le and Wolff, E. (1991) Characteristics of the flavor properties of the cultivated mushroom and the influence of the drying process. Lebens. Wiss. Technol., 24:5, pp. 386-390.
222. Moyne, C. and Puiggali, J. R. (1991) Drying: Ten years of effort and future prospects. Rev. Gen. Therm., 30, pp. 356-357.
223. Hallstroem, A. (1992) Dry and dusty. Trends in the development of powder manufacture. Chem.-Anlagen Verfahren, 25:1, pp. 63-64.
224. Scherer, G. W. (1992) Ultrastructure Processing of Advanced Materials Ultrastrut. Process Adv. Matter - 4th Proceedings, pp. 179-199. Wiley, New York
225. Scherer, G. W. (1992) Recent progress in drying gels. Journal of Non-Crystalline Solids., pp. 147-148.
226. Cheryan, M. (1992) Handbook of Food Engineering, pp. 393-436. Marcel Dekker, New York
227. Okos, M. R., Narsimhan, G., Singh, R. K. and Weitnauer, A. C. (1992) Handbook of Food Engineering, pp. 437-562. Marcel Dekker, New York
228. Malhotra, K. and Okazaki, M. (1992) Advances in Drying, Vol. 5, pp. 325-366. Hemisphere, New York
229. Polat, O., Crotogino, R. H. and Douglas, W. J. M. (1992) Advances in Drying, Vol.5, pp. 263-299. Hemisphere, New York
230. Tsotsas, E. T. (1992) Drying '92 (Part A), pp. 17-41. Elsevier, Amsterdam
231. Shah, R. M. and Arora, P. K. (1992) Drying '92 (Part B), pp. 1311-1320. Elsevier, Amsterdam
232. Sano, Y. (1992) Drying of polymer solution. Drying Technology, 10:3, pp. 591-622.
233. Papadakis, S. and Bahu, R. (1992) The sticky issues of drying. Drying Technology, 10:4, pp. 817-834.
234. Puiggali, J. R. and Quintard, M. (1992) Advances in Drying, pp. 109-143. Hemisphere, New York
235. Lindsay, J. D. (1992) Advanced Heat Transfer Manuf. Process, pp. 81-106.
236. Lievense, L. C. and Riet, K. ven't (1993) Convective drying of bacteria. I. The drying process. Advances in Biochemical Engineering/ Biotechnology, pp. 45-65.
237. Waananen, K. M., Litchfield, J. B. and Okos, M. R. (1993) Classification of drying models for porous solids (A review). Drying Technology, 11:1, pp. 1-40.
238. Polat, S. (1993) Heat and mass transfer in impingement drying. Drying Technology, 11:6, pp. 1147-1176.
239. Sun, D. W. and Woods, J. L. (1993) The moisture content/relative humidity equilibrium relationship of wheat; A review. Drying Technology, 11:7, pp. 1523-1551.
240. Cenkowki, S., Jayas, D. S. and Pabis, S. (1993) Deep-bed grain drying. A review of particular theories. Drying Technology, 11:7, pp. 1553-1581.
241. Lin, D. and Li, S. (1993) Direct devolution of polymer solutions. Hecheng Xiangjiao Gonzye, 16:6, pp. 365-370.
242. Uematsu, K. and Zhang, Y. (1993) Control of the aggregate state of fine particles. Mass transfer in the powder layer. Funtai Kogaku Kaishi, 30:10, pp. 728-735.
243. Liedy, W. (1993) Influence of product properties on drying. Chemie Ingenieur Technik (CIT), 65:2, pp. 167-168.
244. Paulapurd, H. and Szikla, Z. (1993) New pressing and drying technologies in manufacture of printing papers. Part II. Papiripar, 37:3, pp. 86-89.
245. Zogzas, N. P., Maroulis, Z. B. and Marinos-Kouris, D. (1994) Moisture diffusivity methods of experimental determination - A review. Drying Technology, 12:3, pp. 483-515.
246. Chen, X. D. (1994) Towards a comprehensive model based control of milk drying processes. Drying Technology, 12:5, pp. 1105-1130.
247. Pang, S. S., Langrish, T. A. G. and Keey, R. B. (1994) Moisture movement in softwood timber at elevated temperatures. Drying Technology, 12:8, pp. 1897-1914.
248. Mujumdar, A. S. (1994) Heat transfer problems in drying (a review). Proceedings of the International Heat Transfer Conference (10th), 1, pp. 105-116.
249. Bueno, J. L., Iglesias, O. and Garcia, A. (1994) Drying equilibrium. I. Binary equilibrium diagram. Ing. Quim, 26:302, pp. 127-132.
250. Carpenter, J. F., Prestrelski, S. J., Anchordoguy, T. J. and Arakawa, T. (1994) Interactions of stabilizers with proteins during freezing and drying. ACS (American Chemical Society) Symposium Series, 567, pp. 134-147.
251. Shimizu, M. (1994) Infrared drying of food powders. Kemikaru Enjiniyaringu, 39:7, pp. 568-572.
252. Krishka, R. and Wesselingh, J. (1994) Improve separation. Separation Technology, pp. 1-28.
253. Rios, G. (1994) Handbook of Powder Technology, Vol. 9, pp. 243-248. Elsevier, Amsterdam
254. Bentejac, R. (1994) Handbook of Powder Technology, Vol. 9, pp. 257-271. Elsevier, Amsterdam
255. Bentejac, R. (1994) Handbook of Powder Technology, Vol. 9, pp. 272-284. Elsevier, Amsterdam
256. Bahu, R. and Kemp, I. (1994) Drying. Next 10.yr. Separation Technology, pp. 133-159.
257. Artes, F. (1995) Innovations in physical modulated treatments for preserved postharvest quality at fruits and vegetables. III. Gaseous treatments. Rev. Esp. Cien. Tecnol. Alim., 35:3, pp. 247-269.
258. (1995) Int. Miner. Process. Congress 19th, 2, pp. 71-73.
259. Cras, E. and Jeanjean, N. (1995) Cocoa quality: Effect of fermentation and drying. Plant Research and Development, 2:3, pp. 21-27.
260. Thurner, F. (1995) Combination of mechanical and thermal drying. Chemie Ingenieur Technik (CIT), 67:7, pp. 843-852.
261. (1994) Resin dryers-product lines reviewed by Buyers' Guide. Plastics Technology, 40, pp. 360-363.
262. Maneval, J. E. (1995) Applications of NMR to drying. NMR Spectroscopy (Annual Report), 31, pp. 345-355.
263. Gomes, V. G. (1995) Review of software for humidity. Drying Technology, 13:4, pp. 1033-1035.
264. Keech, A. M., Keey, R. B., Zhang, Q. J., Langrish, T. A. G., Kemp, I. C. and Pasley, H. S. (1995) An experimental test of the concept of the characteristic drying curve using the thin-layer method. Drying Technology, 13:5, pp. 1133-1152.
265. Pang, S. and Haslett, A. N. (1995) The application of mathematical models to the commercial high-temperature drying of softwood lumber. Drying Technology, 13:8, pp. 1635-1674.
266. Satas, D. (1995) Advances in Pressure Sensitive Adhesion Technology 2, pp. 190-215. Satas & Associates
267. Xiang, H., Zhong, B. and Peng, S. (1995) Supercritical fluid drying theory, technology and application. Cailiao Kexue Yu Gong, 13:2, pp. 36-42.
268. Scherer, G. W. (1995) Fundamentals of drying and shrinkage. Proc. Sci. Whitewares Conf. pp. 199-211.
269. Hasatani, M. and Itaya, Y. (1996) Drying-induced stress and strain: A review. Drying Technology, 14:5, pp. 1011-1040.
270. Nakanishi, M. (1996) Design techniques of cooling and drying towers for chlorine. Soda to Enso, 471:1, pp. 4-15.
271. Puri, P. S. (1996) Gas separation membranes - Current status. Memburein, 6:3, pp. 117-126.
272. Naujoks, V. (1996) Compost manufacture with environmental awareness by application of high-tech. Umwelt-Technol. Aktuell, 7:5, pp. 387-390.
273. Seyed, Y. J. (1996) Enhancement of heat and mass transfer with innovative impinging jets. Drying Technology, 14:5, pp. 1173-1196.
274. Sokhansanj, S. and Raghavan, G. S. V. (1996) Drying of grains and forages: A brief review of recent advances. Drying Technology, 14:6
275. Ceclan, R. E. and Ceclan, M. (1996) Equipment for the purification and dewatering of mineral oils. Constr. Mas., 48:6, pp. 53-59.
276. Zogzas, N. P., Maroulis, Z. B. and Marinos-Kouris, D. (1996) Moisture diffusivity data compilation in foodstuffs. Drying Technology, 14:10, pp. 2225-2253.
277. Gu, F. and Zheng, R. (1996) Gas-solid flow and heat mass transfer in cyclone fields and gravity fields. Huagong Jixie, 23:1, pp. 46-52.
278. Sainte-Beuve, J. (1996) Drying of crumb natural rubber: Latest results. Symp. Technol. End Uses Nat Rubber, pp. 89-97.
279. Brautlecht, P. (1996) Loading of vapor condensates from drying of municipal sewage sludges. Stickstoffrueckbelastung
280. Zbicinski, I., Grad, J., Strumillo, C. and Smucerawicz, I. (1996) Drying '96 (International Drying Symposium), Vol. 10, pp. A631-A637.
281. Harrori, M. and Asai, H. (1997) Far infrared heating G flex heater development. Kogyo Kanetsu, 34:1, pp. 46-53.
282. Ayappa, K. G. (1997) Modeling transport processes during microwave heating: A review. Reviews in Chemical Engineering, 13:2
283. Sotocinal, S. A., Alikhani, Z. and Raghavan, G. S. V. (1997) Heating/ drying using particulate medium: A review. Part I. General and heat transfer parameters. Drying Technology, 15:2, pp. 441-459.
284. Sotocinal, S. A., Alikhani, Z. and Raghavan, G. S. V. (1997) Heating/ drying using particulate medium: A review. Part II. Equipment. Drying Technology, 15:2, pp. 461-475.
285. Bhandari, B. R., Datta, N. and Howes, T. (1997) Problems associated with spray drying of sugar-rich foods. Drying Technology, 15:2, pp. 671-684.
286. Hagvald, H. and Karlsson, J. (1997) Dewatering and control of press felt in high speed paper machine. Kami Parupu Gijutsu Taimusu, 40:2, pp. 14-16.
287. Pan, Y. (1997) Characteristics of drying process and research strategy on drying technology. Huaxue Gongcheng, 25:3, pp. 37-41.
288. Yan, H. and Wang, X. (1997) Development and application on drying technology and equipment in China. Huaxue Gongcheng, 25:5, pp. 6-14.
289. Brijsse, Y. H. G. and Casier, C. (1997) Determination of the drying behavior of clry raw materials. Tijdschr. Klei. Glas. Keram., 18:4, pp. 19-24.
290. Kazarian, S. G. (1997) Applications of FTIR spectroscopy to supercritical fluid drying extraction and impregnation. Applied Spectroscopy Reviews, 32:4, pp. 301-348.
291. Kupfer, P. (1997) Dewatering sludges from gravel works with membrane filter presses. Aufbereit. Tech., 38:5, pp. 237-244.
292. Liedy, W. (1997) Requirements and possibilities in the development of drying process. Chemie Ingenieur Technik (CIT), 69:5, pp. 632-636.
293. Dorica, J. and Allen, V. (1997) Dewatering sludges from pulp and paper mills. Rev. ATIP, 51:6, pp. 197-201.
294. Nowaczck, E. J. (1997) The application of air-blowing ultrasonics in the dryer of water-based inks in fiber and foils. American Ink Maker, 75:9, pp. 38-40.
295. Yoshida, M. (1997) Correlation method for drying rates based on characteristic functions. Kagaku Kogaku, 61:12, pp. 940-943.
296. Mizier, M. D. (1997) Wastewater treatment sludge means to decrease its water content. Eau, Ind., Nuisances, 209, pp. 33-35.
297. LeMaguer, M. (1998) Osmotic dehydration: Review and future directions. Proceeding of Symposium in Food Preservation, Brussels, 1, pp. 283-309.
298. Besra, L., Sengupta, D. K. and Roy, S. K. (1998) Flocculant and surfactant aided dewatering of fine particle suspensions: A review. Mineral Processing and Extractive Metallurgy Review, 18:1, pp. 67-103.
299. Uetz, W. (1998) Modern drying technology for electroplating sludges worldwide in use. Oberflaechen Polysurf., 39:1, pp. 19-20.
300. Prasertsan, S. and Saen, S. P. (1998) Heat pump dryers: Research and development needs and opportunities. Drying Technology, 16:1, pp. 251-270.
301. Thyagarajan, R., Shaumugam, J., Panda, R. C., Ponnavaikko, M. and Rao, P. G. (1998) Artificial neural networks: Principle and application to model based control of drying systems - A review. Drying Technology, 16:6, pp. 931-966.
302. Sato, Y. (1998) Application of high frequency drying. Konbatekku, 26:7, pp. 47-51.
303. Tokorozaki, M. (1998) Coating film baking dry systems by infrared radiation. Toso Gijutsu, 37:8, pp. 114-116.
304. Purcell, T. and Davidson, G. (1998) Dehydration of natural gas. International Journal of Hydrocarbon Engineering, 3:9, pp. 58-61.
305. Tanaka, T. (1998) Trouble shooting for coatings and coating fibers (6). Defects in drying procedures. Toso Gijutsu, 37:9, pp. 121-125.
306. Nunn, R. F. (1998) Advances in red mud dewatering and disposal technologies. Light Metals. pp. 107-113.
307. Rieck, M. (1998) Benefits of the use of microwave technology in ceramic production process (drying). Ceram. Verriere, 939, pp. 426-431.
308. Orbey, H. and Sandler, S. I. (1998) Modeling Vapor - Liquid Equilibrium, pp. 5-18. Cambridge University Press, UK
309. Stoffregen, H., Doelll, P. and Wessocek, G. (1999), 31:1, pp. 29-35.
310. Rerpka, V. (1999) Hydraulic mining of coal sludge settling ponds and subsequent reflotation and dewatering. Uhli-Rudy-Geol Pruzkum, 6:1, pp. 15-16.
311. Hubbe, M. A. (1999) Difficult furnishes. Proc. TAPPI'99, Prep. Next Millennium, 3, pp. 1353-1367.
312. Hashiride, H. (1999) Organic solvent drying. Konbatekku, 27:4, pp. 58-59.
313. Song, S., Chen, L. and Fu, J. (1999) Desiccation tolerance and molecular basis of embryogenesis abundant protein in seed. Zhiwu Shenglixue Tongxun, 35:5
314. Lin, X., Shang, Q., Li, Y. and Zhang, S. (1999) Browning of raisins during drying. Kexue, 20:6, pp. 72-74.
315. Anonymous (1999) Deep dewatering centrifuges by German company Fottweg. Voddsnabzn. Sanit. Tekh., 7, p. 30.
316. Tang, J. X., Wang, Z. L. and Huang, L. X. (1999) Recent progress of spray drying in China. Drying Technology, 17:9, pp. 1747-1757.
317. Cao, C. (0999) The current situation of grain drying in China. Drying Technology, 17:9, pp. 1759-1766.
318. Serizawa, T. and Akashi, M. (1999) Development of new preparation method of polymeric ultrathin film. Kobunshi Kako, 48:10, pp. 469-473.
319. Saito, M. (1999) Design example of medium-wavelength infrared hardening drying system. Toso Gijutsu, 38:9, pp. 73-80.
320. Kuyama, S. (1999) Coating drying system. Toso Gijutsu, 38:11, pp. 65-69.
321. Nakagawa, K. and Shirota, K. (1999) Chemical pretreatment system and environmental problems. Toso Gijutsu, 38:11, pp. 71-81.
322. Parkes, G. M. B., Barnes, P. A. and Charsley, E. L. (1999) New concepts in sample controlled thermal analysis resolution in the time and temperature domains. Analytical Chemistry, 71:13, pp. 2482-2487.
323. Tomioka, H. (1999) Cleaning (and drying) technology. Handotai Kenkyu, 45, pp. 3-22.
324. Pierce, R. J. (1999) Auxiliary equipment (including drying). Plastics Engineering, 54, pp. 141-186.
325. Vijh, A. K. (1999) Electro-osmotic dewatering of clays, soils, and suspensions. Modern Aspects of Electrochemistry, 32, pp. 301-322.
326. Rouquerol, F., Rouquerol, J. and Sing, K. (1999) Adsorption by Powders and Porous Solids, pp. 93-115. Academic Press, London
327. Nebra, S. A., Silva, M. A. and Mujumdar, A. S. (2000) Drying in cyclones - A review. Drying Technology, 18:3, pp. 791-832.
328. Mujumdar, A. S. and Wu, J. (2000) Analysis of recent patent literature on drying and dryers. Drying Technology, 18:4, pp. 1147-1156.
329. Salminen, P. and Toivakka, M. (2000) Consolidafion of coating layers. Papermaking Sci. Technol., 11, pp. 676-690.
330. Leconte, J. M. (2000) Drying in the mineral industry: Fundamentals and general concepts of drying installations. Tech. Ind. Miner., 8, pp. 32-42.
331. Kaminski, W. and Kudra, T. (2000) Drying Technology in Agriculture and Food Sciences, pp. 1-34. Science Publishers, Enfield, NH
332. Sablani, S., Rahman, S. and Al-habsi, N. (2000) Drying Technology in Agriculture and Food Sciences, pp. 35-59. Science Publishers, Enfield, NH
333. Krokida, M. and Maroulis, Z. (2000) Drying Technology in Agriculture and Food Sciences, pp. 61-106. Science Publishers, Enfield, NH
334. Beke, J. and Mujumdar, A. S. (2000) Drying Technology in Agriculture and Food Sciences, pp. 107-132. Science Publishers, Enfield, NH
335. Achanta, S. and Okos, M. R. (2000) Drying Technology in Agriculture and Food Sciences, pp. 133-147. Science Publishers, Enfield, NH
336. Senadeera, W., Bhandari, B., Young, G. and Wizesinghe, B. (2000) Drying Technology in Agriculture and Food Sciences, pp. 149-190. Science Publishers, Enfield, NH
337. Patil, R. A. and Sokhansanj, S. (2000) Drying Technology in Agriculture and Food Sciences, pp. 191-212. Science Publishers, Enfield, NH
338. Jon, C. K., Mujumdar, A. S., Kiang, C. S., Choy, H. J. and Hawlader, M. N. A. (2000) Drying Technology in Agriculture and Food Sciences, pp. 212-251. Science Publishers, Enfield, NH
339. Sanga, E., Mujumdar, A. S. and Raghavan, G. S. V. (2000) Drying Technology in Agriculture and Food Sciences, pp. 253-289. Science Publishers, Enfield, NH
340. Mujumdar, A. S. and Passos, M. L. (2000) Drying Technology in Agriculture and Food Sciences, pp. 291-310. Science Publishers, Enfield, NH
341. Shiina, T. (2000) The basic aspect of foil arrangement - Fourdrinier. Kami Pa Gikyoshi, 54:5, pp. 606-612.
342. Vouillemet, M. (2000) Drying in the ceramic industry. Tech. Ind. Miner., 8, pp. 93-98.
343. Tochigi, K., Yoshida, A. and Goto, M. (2000) 64:10, pp. 494-503.
344. Krizek, R. J. (2000) ASTM Spec. Tech. Publ. STP 1374, pp. 3-28.
345. Hirose, T. (2000) Kinosei Inki no Saishio Gijutsu, Vol. 15, pp. 270-201.
346. Kopp, J. and Dichtl, N. (2001) Sludge into Biosolids, pp. 19-39. IWA Publishing, London
347. Novak, J. T. (2001) Sludge into Biosolids, pp. 329-363. IWA Publishing, London
348. Torringa, E., Lourenco, F., Scheewe, I. and Bartels, P. (2001) Osmotic Dehydration & Vacuum Impregnation;, pp. 217-224. Technomic Publishing, Basel
349. Fito, P. and Martin, M. E. (2001) Osmotic Dehydration & Vacuum Impregnation, pp. 225-241. Technomic Publishing, Basel
350. Carr, W. W., McFarland, E. G. and Sarma, D. S. (2001) Infrared absorption characteristics of fabrics. Surfactant Science Series, 94, pp. 93-121.
351. 2. Qingdao Huagong Xueyuan Xuebao, 22:3, pp. 218-222.
352. Stowe, R. W. (2001) Power play: Analyzing the use of UV light as the energy source for drying. Modern Paint and Coatings, 91:3, pp. 33-34.
353. Rahman, M. S. (2001) Toward prediction of porosity in foods during drying: A brief review. Drying Technology, 19:1, pp. 1-13.
354. Kemp, I. C., Fyhr, B. C., Laurent, S., Roques, M. A., Groenewold, C. E., Tsotsas, E., Sereno, A. A., Bonazzi, C. B., Bimbenet, J. J. and Kind, M. (2001) Methods for processing experimental drying kinetics data (a review of 12 methods). Drying Technology, 19:1, pp. 15-34.
355. Lenart, A. and Piotrowski, D. (2001) Drying characteristics of osmotically dehydrated fruits coated with semipermeable edible films. Drying Technology, 19:5, pp. 849-877.
356. Hasatani, M., Kabayashi, N. and Li, Z. (2001) Review: Drying and dewatering R&D in Japan. Drying Technology, 19:7
357. Savoie, P. (2001) Intensive mechanical conditioning of forages: A review. Canadian Biosystems Engineering CTE, 43, pp. 2.1-2.12.
358. Nakamura, M. (2001) Drying. Kemikara Enjiniyaringu, 46:3, pp. 206-208.
359. Zheng, V. and Wang, S. (2001) Progress of study on storage of ultra-dried seed. Jiangxi Nongye Daxue Xuebao, 23:4, pp. 544-547.
360. Porter, M. G. and Murray, R. S. (2001) The volatility of components of grass silage on oven drying and the inter-relationship between dry matter content estimated by different analytical methods. Grass and Forage Science, 56:4, pp. 405-411.
361. Chung, X. (2001) Progress of study on economical process for ethanol dehydration - A review. Niangjiu, 28:5, pp. 91-94.
362. Asahi, S. (2001) Granular composition and new food development. Kagaku Sochi, 43:6, pp. 90-97.
363. Shcheeranko, A. P. (2001) Drying of beet pulp by overheated water steam as a promising and cost-saving technique. Sakhar, 6, pp. 18-20.
364. Broline, B. M. and White, I. (2001) Spray dried resins for wood. International Symposium on Wood Adhesives (USA), 7, pp. 475-477.
365. Kerekes, B. (2001) Technical improvements in drying of tobacco. GEP, 8, pp. 28-33.
366. Owerfeldt, G. (2001) Drying of industrial plastics in the right ratio. Plastverarbeiter, 52:9, pp. 148-149.
367. Wilson, B. (2001) Conference Proceedings - International Nonwovens Technical Conf., Baltimore, pp. 748-758.
368. Yamamura, M. (2001) Coating film drying following phase separation. Konbatekku, 29:10, pp. 24-27.
369. Wu, H. (2001) Review on drying technology of PVC resins. Huagong Shikan, 15, pp. 43-45.
370. Yoshida, M. and Yamamura, M. (2001) Numerical simulation of coating film diving - A review. Toso Kogaku, 36:10, pp. 359-367.
371. Okuyama, K. and Iskandar, R. (2001) Preparation of self structured meso porous silica microparticles by spray drying method. Kemikaru Enjiniyaringu, 46:10, pp. 746-751.
372. Leisen, J. and Beckham, H. W. (2001) Quantitative magnetic resonance imaging fluid distribution and movement in textiles. Textile Research Journal, 71:12, pp. 1033-1045.
373. Kirth, H. (2001) Drier. Kotinguyo Tenkazai no Sashin Gijutsu. pp. 154-161.
374. Holl, Y., Keddie, J. L., McDonald, P. J. and Winnik, W. A. (2001) Drying modes of polymer solids. ACS Symposium Series (American Chemical Society), 790, pp. 2-26.
375. Pekurovsky, L. A. and Scriven, L. E. (2001) On capillary forces and stress in drying latex coating. ACS Symposium Series (American Chemical Society), 790, pp. 27-40.
376. Talja, R., Karlsson, M. and Malashenko, A. (2001) Preprint-PAPTAC Annual Meeting, 87th, Montreal, pp. B229-B238.
377. Reineccius, G. (2001) Microencapsulation of Food Ingredients, p. l5l. Leatherhead, London
378. Vilstrip, P. (2001) Microencapsulation of Food Ingredients, pp. 185-197. Leatherhead, London
379. Hasegawa, T. (2002) Fiber formation and properties of polyimides. Saishin Porilmido., pp. 101-138.
380. Billi, D. and Potts, M. (2002) Life and death at dried prokaryotes. Research in Microbiology, 153:1, pp. 7-12.
381. Prat, M. (2002) Recent advances in pore-scale models for drying of porous media. Chemical Engineering Journal (Amsterdam), 86:12, p. l53.
382. Nagase, K. and Kamiya, Y. (2002) 37:2, pp. 56-65.
383. van Deventer, H. C. and Heijmans, R. M. H. (2002) Steam drying energy-conserving drying technology becomes practical. NPT Procestechnologie, 9:2, pp. 12-13.
384. Teshirogi, M. and Tahata, E. (2002) 32:3, pp. 169-173.
385. Elistratov, A. V. and Istomin, V. A. (2002) 4, pp. 31-34.
386. Kerkhof, P. and Coumans, W. J. (2002) Drying: A fascinating unit operation. Chemical Engineering Journal (Amsterdam), 86:1
387. Goto, M. (2002) Hot air type drier. Konbatekku, 30:5, pp. 99-105.
388. Sakai, N. (2002) Applied technology of SC processor (indirect heating drier) and mixer. Kagaku Sochi, 44:6, pp. 49-52.
389. Wehner, J. and Schrade, K. W. (2002) New microwave technology for drying of coatings. JOT, Journal Fuer Oberflachentechnik, 42:7, pp. 14-17.
390. Nakamura, M. (2002) Drying. Fundamentals of drying operation. Kagaku Kogaku, 66:7, pp. 398-402.
391. Furuta, T. (2002) Drying. Spray drying in liquid foods. Kagaku Kogaku, 66:7, pp. 406-408.
392. Nomura, T. and Iyota, H. (2002) Drying. Superheated steam drying. Kagaku Kogaku, 66:7, pp. 409-413.
393. Mizutani, F. (2002) Drying. Practical examples of drying vibration technologies. Kagaku Kogaku, 66:7, pp. 421-425.
394. Chua, K. J., Chou, S. K., Ho, J. C. and Hawlader, M. N. A. (2002) Heat pump drying: Recent developments and future trends. Drying Technology, 20:8, pp. 1579-1610.
395. Pangavhane, R. and Swahney, R. L. (2002) Review of research and development work on solar dryers for grape dryers. Energy Conversion and Management, 43:1, pp. 45-61.
396. Li, B. and Sun, D. W. (2002) Novel methods for rapid freezing and thawing of foods - A review. Journal of Food Engineering, 54, pp. 175-182.
397. Judd, S. and Short, C. (2002) Dewatering and drying of water industry sludges. TCE (Inst. Chem Eng. UK) (American Chemical Society), 730, pp. 42-44.
398. Marzullo, G. B. (2002) Advanced diagnostic techniques and in situ coating methods to optimize the performance of dryer cylinders. APPITA Annual Conference Proceedings, 56, pp. 355-361.
399. Elkins, P. R. (2002) Sheet printability - A primary driving force for current trends and developments in porous processing mode. APPITA Annual Conference Proceedings, 56, pp. 373-380.
400. Heydenrych, M. D., Greeff, P., Heesink, A. B. M. and Versteeg, G. F. (2002) Mass transfer in rolling rotary kilns. Chemical Engineering Science, 57:18
401. Bergins, C. (2003) Kinetics and mechanism during mechanical/thermal dewatering of lignite. Fuel, 82:4, pp. 355-364.
402. Ramaswamy, S. (2003) Vacuum dewatering during paper manufacturing. Drying Technology, 21:4, pp. 685-717.
403. Hussain, M. M. and Dinceer, I. (2003) Analysis of two-dimensional heat and moisture transfer during drying of spherical objects. International Journal of Energy Research, 27:8, pp. 703-713.
404. Arinze, E. A., Schoenau, G. J., Sokhansanj, S. and Adapa, P. (2003) Aerodynamic separation and fractional drying of alfalfa leaves and stems - A review and new concept. Drying Technology, 21:9, pp. 1669-1698.
405. Ramarao, B. V., Massoquete, A., Lavrykov, S. and Ramaswamy, S. (2003) Moisture diffusion inside paper materials in the hygroscopic range and characteristics of diffusivity parameters. Drying Technology, 21:10, pp. 2007-2056.
406. Rooks, A. (2003) Coatings (spray drying): A research review. Solutions, 86:5, pp. 34-35.
407. Liu, X. D., Ding, X. M., Wang, X. Z., Pan, Y. K., Cao, C. W. and Liu, D. Y. (2004) Drying research and development in China. Drying Technology, 22
408. Kudra, T. (2004) Energy aspects in drying. Drying Technology, 22:5, pp. 917-932.
409. Schlunder, E. U. (2004) Drying of porous material during the constant and the falling rate periods: A critical review of existing hypotheses. Drying Technology, 22:6, pp. 1517-1532.
410. Boonyai, P., Rhandari, B. R. and Howes, T. (2004) Stickiness measurement techniques for food powders: A review. Powder Technology, 145, pp. 34-46.
411. Mayor, L. and Sereno, A. M. (2004) Modeling shrinkage during convection drying of food material: A review. Journal of Food Engineering, 61:3, pp. 373-366.
412. Roos, Y. H. (2004) Dehydration of Products of Biological Origin, pp. 3-22. Science Publishers, Enfield, NH
413. Sagara, Y. (2004) Dehydration of Products of Biological Origin, pp. 23-42. Science Publishers, Enfield, NH
414. Devres, O. Y. (2004) Dehydration of Products of Biological Origin, pp. 43-92. Science Publishers, Enfield, NH
415. Islam, M. R. and Mujumdar, A. S. (2004) Dehydration of Products of Biological Origin, pp. 93-133. Science Publishers, Enfield, NH
416. Benali, M. (2004) Dehydration of Products of Biological Origin, pp. 137-152. Science Publishers, Enfield, NH
417. Perera, C. O. (2004) Dehydration of Products of Biological Origin, pp. 153-163. Science Publishers, Enfield, NH
418. Yamatoto, S. (2004) Dehydration of Products of Biological Origin, pp. 165-201. Science Publishers, Enfield, NH
419. Lik, H. C. (2004) Dehydration of Products of Biological Origin, pp. 203-221. Science Publishers, Enfield, NH
420. Mulet, A., Rossello, C., Gou, P., Lopez, N. and Clemente, G. (2004) Dehydration of Products of Biological Origin, pp. 223-250. Science Publishers, Enfield, NH
421. Alves-Filho, O. (2004) Dehydration of Products of Biological Origin, pp. 251-274. Science Publishers, Enfield, NH
422. Kundu, K. M. (2004) Dehydration of Products of Biological Origin, pp. 275-295. Science Publishers, Enfield, NH
423. Adapa, P., Schoendu, G., Tabil, L. J. and Sokhansanj, S. (2004) Dehydration of Products of Biological Origin, pp. 299-315. Science Publishers, Enfield, NH
424. Farkas, I. (2004) Dehydration of Products of Biological Origin, pp. 317-368. Science Publishers, Enfield, NH
425. Sokhansanj, S., Pordesimo, L. and Arinze, E. (2004) Dehydration of Products of Biological Origin, pp. 369-387. Science Publishers, Enfield, NH
426. Pang, S. (2004) Dehydration of Products of Biological Origin, pp. 389-433. Science Publishers, Enfield, NH
427. Sadykov, R. A. (2004) Dehydration of Products of Biological Origin, pp. 437-466. Science Publishers, Enfield, NH
428. Orsat, V. and Raghavan, G. S. V. (2004) Dehydration of Products of Biological Origin, pp. 467-492. Science Publishers, Enfield, NH
429. Devahastin, S. and Suvarnakuta, P. (2004) Dehydration of Products of Biological Origin, pp. 493-512. Science Publishers, Enfield, NH
430. Perera, C. O. (2005) Selected quality attributes of dried foods. Drying Technology, 23:4, pp. 717-730.
431. Kasapis, S. (2005) Glass transition phenomena in dehydrated model systems and foods: A review. Drying Technology, 23:4, pp. 731-758.
432. Tellis, V. R. N., Telis-Romero, J. and Gabas, A. L. (2005) Solids rheology for dehydrated food and biological materials. Drying Technology, 23:4, pp. 759-780.
433. Bhandari, B. and Howes, T. (2005) Relating the stickiness property of foods undergoing drying and dried products to their surface energetics. Drying Technology, 23:4, pp. 781-797.
434. Desai, K. G. H. and Park, H. J. (2005) Recent developments in microencapsulation of food ingredients. Drying Technology, 23:7, pp. 1361-1394.
435. Katekawa, M. E. and Silva, M. A. (2006) A review of drying models including shrinkage effects. Drying Technology, 24:1, pp. 5-20.