Drying-induced strain and stress: A review

Drying Technology

Volumn 14, Issue 5, 1996, Pages 1011-1040

  Hasatani, Masanobu ^a   Itaya, Yoshinori ^a  

^a NAGOYA UNIVERSITY   (Japan)

Author keywords

Crack formation; Elasticity; Internal stress; Modeling; Quality control; Shrinkage; Suction potential; Viscoelasticity

Indexed keywords

CRACK PROPAGATION; DEFORMATION; FAILURE ANALYSIS; HEAT TRANSFER; MASS TRANSFER; MATHEMATICAL MODELS; MOISTURE; RESIDUAL STRESSES; SHRINKAGE; STRAIN; THERMAL GRADIENTS; VISCOELASTICITY;

CONSTITUTIVE EQUATIONS; DARCY EQUATION; MOISTURE REMOVAL; SUCTION POTENTIAL;

DRYING;

EID: 0030142797     PISSN: 07373937     EISSN: None     Source Type: Journal    
DOI: 10.1080/07373939608917138     Document Type: Article

References (76)

1. Norton, F. H. and Johnson, A. L. 1944. Fundamental Study of Clay: V, Nature of Water Film in Plastic Clay., J. American Ceramic Society, 27(3): 77-80.
2. Kamei, S. and Toci, R. 1952. Studies on Drying Shrinkage., Kagaku Kikai, 16(11), 372-377.
3. Newitt, D. M. and Coleman, M. The Mechanism of Drying of Solids pan III The Drying Characteristics of China Clay., Trans. Instn. Chem. Engrs., 30, 28-45.
4. Bird, R. B., Stewart, W. E. and Lightfoot, E. N. 1960. Transport Phenomena., John Wiley & Sons, Inc., New York.
5. Furuta, T. and Hayakawa, K. 1992. Heat and Moisture Transfer with Thermodynamically interactive fluxes and volumetric Changes - I. Mathematical Model Development and Numerical Solution., Trans. ASAE, 35, 1537-1546.
6. Biot, M. A. 1941. General Theory of Three-Dimensional Consolidation., J. Applied Physics, 12(2), 155-164.
7. Luikov, A. V. 1966. Heat and Mass Transfer in Capillary-Porous Bodies., Pergamon Press, London, 406.
8. Biot, M. A. 1954. Theory of Stress-Strain Relations in Anisotropic Vicoelasticity and Relaxation Phenomena., J. Applied Physics, 25(11), 1385-1391.
9. Biot, M. A. 1956. Theory of Propagation of Elastic Waves in a Fluid-Saturated Porous Solid. I. Low-Frequency Range., J. Acoustical Society of America, 28(2), 168-178.
10. Biot, M. A. 1956. Theory of Propagation of Flastic Waves in a Fluid-Saturated Porous Solid. II. Higher Frequency Range., J. Acoustical Society of America, 28(2), 179-191.
11. Biot, M. A. 1962. Generalized Theory of Acoustic Propagation in Porous Dissipative Media., J. Acoustical Society of America, 34(9), 1254-1264.
12. Biot, M. A. 1962. Mechanics of Deformation and Acoustic Propagation in Porous Media., J. Applied Physics, 33(4), 1482-1498.
13. Geertsma, J. 1957. A Remark on the Analogy between Thermoelasticity and the Elasticity of Saturated Porous Media., J. Mechanics and Physics of Solids, 6(1), 13-16.
14. Chandler, R. N. and Johnson, D. L. 1981. The Equivalence of Quasistatic Flow in Fluid-Saturated Porous Media and Biot's Slow Wave in the Limit of Zero Frequency., J. Applied Physics, 52(5), 3391-3395.
15. Johnson, D. L. 1982. Elastodynamics of Gels., J. Applied Physics, 77(3), 1531-1539.
16. Scherer, G. W. 1989. Drying Gels. VIII. Revision and Review., J. Non-Crystalline Solids, 109, 171-182.
17. Onoda, G. Y., Liniger, E. G. and Janney, M. A. 1988. Dilatancy and Plasticity in Ceramic Particulate Bodies., Ceram. Trans. 1 (Ceramic Powder Sci. II), eds. G. L. Messing, E. R. Fuller, Jr. and H. Hausner, pp. 611-623.
18. Findley, W. N., Lai, J. S. and Oneran, K. 1976. Creep and Relaxation of Nonlinear Viscoelastic Materials. With an Introduction to Linear Viscoelasticity., Dover Publications, Mineora, pp. 50-107.
19. Irudayaraj, J. and Haghighi, K. 1993. Stress Analysis of Viscoelastic Materials during Drying. I - Theory and Finite Element Formulation., Drying Technology, 11 (5), 901-927.
20. Norton, F. H. 1939. Precise Measurement of Drying Shrinkage., Ceramic Age, 33, 7-8.
21. Macey, H. H. 1942. Clay-Water Relationships and Internal Mechanism of Drying., Trans. Brit. Ceramic Society, 41(4), 73-121.
22. Kamei, S. and Toci, R. 1952. Studies on Drying Shrinkage., Kagaku Kikai, 16(11), 372-377.
23. Hasatani, M., Itaya, Y., Muroie, K. and S. Taniguchi. 1993. Contraction Characteristics of Molded Ceramics during Drying., Drying Technology, 11(4), 815-830.
24. Ohtani, S., Suzuki, M. amd Maeda, S. 1963. On the Suction Potential of Granular Material., Kagaku Kagaku, 27(9), 638-645.
25. Shishido, I., Maruyama, T., Funaki, M. and Ohtani, S. 1987. On the Drying Mechanism of Shrinkage Material., Kagaku Kogaku Ronbunshu, 13(1), 78-85.
26. Shishido, I., Iida, K., Muramatsu, T. and Ohtani, S. 1987. Measurement of Mechanical and Transport Properties in Drying Shrinkage Materials., Kagaku Kogaku Ronbunshu, 13(4), 522-525.
27. Shishido, I., Muramatsu, T. and Ohtani, S. 1988. Local Moisture Content and Stress Distributions within Clay during Drying Shrinkage., Kagaku Kogaku Ronbunshu, 14(1), 87-94.
28. Hasatani, M., Itaya, Y. and Hayakawa, K. 1992. Fundamental Study on Shrinkage of Formed Clay during Drying -Viscoelastic Strain-Stress and Heat/Moisture Transfer., Drying Technology, 10(4), 1013-1036.
29. Itaya, Y., Mabuchi, S. and Hasatani, M. 1995. Deformation Behavior of Ceramic Slabs by Nonuniform Drying., Drying Technology, 13(3), 801-819.
30. Hasatani, M. and Itaya, Y. 1994. Effect of Three-Dimensional Heat and Moisture Transfer on Deformation and Stress Behaviors of Molded Ceramics during Drying., Proc. 10th Int. Heat Trans. Conf., vol. 5, Brighton, 297-302.
31. Scherer, G. W. 1988. Drying Gels: VI. Viscoelastic Plate., J. Non-Crystalline Solids, 99, 324-358.
32. Scherer, G. W. 1989. Drying Gels: VII. Diffusion during Drying., J. Non-Crystalline Solids, 107, 135-148.
33. Scherer, G. W. 1988. Aging and Drying of Gels., J. Non-Crystalline Solids, 100, 77-92.
34. Scherer, G. W. 1989. Mechanics of Syneresis., J. Non-Crystalline Solids, 108, 18-27.
35. Scherer, G. W. 1992. Crack-Tip Stress in Gels., J. Non-Crystalline Solids, 144, 210-216.
36. Tanaka, T., Hocker, L. O. and Benedek, G. B. 1973. Spectrum of Light Scattered from a Viscoelastic Gel., J. Chem. Phys., 59(9), 5151-5159
37. Scherer, G. W. 1994. Effect of Drying on Viscoelasticity and Permeability of Gel., Mat. Res. Soc. Symp. Proc., vol.346, 209-215.
38. Scherer, G. W. 1992. Stress Development during Supercritical Drying., J. Non-Crystalline Solids, 145, 33-40.
39. Scherer, G. W. 1994. Stress in Aerogel during Depressunriation of Autoclave: I. Theory., J. Sol-Gel Science and Technology, 3, 127-139.
40. Scherer, G. W. 1994. Stress in Aerogel during Dupressurization of Autoclave: II. Silica Gels., J. Sol-Gel Science and Technology, 3, 141-150.
41. Scherer, G. W. 1993. Freezing Gels., J. Non-Crystalline Solids, 155, 1-25.
42. Towner, G. D. 1987. The Mechanics of Cracking of Drying Clay., J. Agric. Engng. Res., 36, 115-124.
43. Towner, G. D. 1987. The Tensile Stress Generated in Clay through Drying., J. Agric. Engng. Res., 37, 279-289.
44. Simpkins, P. G., Johnson, D. W. Jr. and Fleming, D. A. 1989. Drying Behavior of Colloidal Silica Gels., J. Am. Ceram Soc., 72(10), 1816-1821.
45. Moyne, C., Kechaou, N., Sobral, P. J. D. A., Roques, M., Cairault, A. and Bizot, H. 1994. Mechanism of Water Transport in Drying of Gels., Int. Chem. Eng., 34(3), 360-369.
46. Tokumoto, M. 1989. Casehardcning and Drying Set in the Kiln-Drying of Wood. I. Creep and Set of Wood during Kiln-Drying., Mokuzai Gakkaishi, 35(3), 175-184.
47. Jones, C. 1989. Careful Drying Lowers Costs in the Planing Mill., Forest Industries, July, 21-23.
48. Perré, P. and Martin, M. 1994. Drying at High Temperature of Sapwood and Heartwood: Theory. Experiment and Proactical Consequence on Kiln Control. Drying Technology, 12(8), 1915-1941.
49. Perré, P. and Passard, J. 1995. A Control-Volume Procedure Compared with the Finite Element Method for Calculating Stress and Strain during Wood Drying., Drying Technology, 13(3), 635-660.
50. Grossmon, P. U. A. 1976. Requirements for a Model That Exhibits Mechano-Sorptive Behavior., Wood Sci. Teehnol., 10, 163-168.
51. Behnke, C. and Militzer, K. E. 1994. A Simulation Model for Timber Drying Checked by Measurement at Technical Kilns., Drying Technology, 12(8), 1841-1862.
52. Erickson, R. 1994. The effect of Drying Temperature on the Mechano-Sorptive Behavior of Red Oak Limber., Drying Technology, 12(8), 1943-1961.
53. Stöhr, H. P. 1988. Shrinkage Differenctial as a Measure for Drying Stress Dtermination., Wood Sci. Technol., 22, 121-128.
54. Taniguchi, Y. and Nishio, S. 1990. Drying of Box-Hearted Square Timber., Zairyo, 39(9), 1192-1196.
55. Alexiou, P. N., Marchant, J. F. and Groves, K. W. 1990. Effect of Pre-Steaming on Moisture Gradients, Drying Stresses and Sets, and Face Checking in Regrowth Eucalyptus Pilulans Sm., Wood Sci. Technol., 24, 210-209.
56. Kawabe, J., Sakamoto, K., Fujimoto, N. and Mataki, Y. 1993. Vacuum-Drying with High-Frequcncy Heating of Sugi Logs. Variations of Internal Stresses in Drying for Red-Heart and Black-Heart Logs., Mokuzai Gakkaishi, 39(3), 284-292.
57. Taniguchi, Y. and Nishio, S. 1993. High-Frequency Electric-Power Vacuum-Drying of Wood V. Change of Pressure in Wood during Drying., Mokuzai Gakkaishi, 39(3), 357-362.
58. Avramidis, S. and Liu, F. 1994. Drying Characteristics of Thick Lumber in a Laboratory Radio-Frequency/Vacuum Dryer., Drying Technology, 12(8), 1963-1981.
59. Liu, F., Avramidis, S. and Zwick, R. L. 1994. Drying Thick Western Hemlock in a Laboratory Radio-Frequency/Vacuum Dryer with Constant and Variable Electrode Voltage., Forest Products Journal, 44(6), 71-75.
60. Gustafson, R. J., Thompson, D. R. and Sokhansany, S. 1979. Temperature and Stress Analysis of Corn Kernel Finite Element Analysis., Trans. ASAE, 22, 955-960.
61. Misra, R. N. and Young, J. H. 1980. Numerical Solution of Simultaneous Moisture Diffusion and Shrinkage during Soybean Drying., Trans. ASAE, 23, 1277-1282.
62. Tsukada, T., Sakai, N. and Hayakawa, K. 1991. Development of Computerized Model for Strain-Stress Analysis of Food undergoing a Simultaneous Heat and Mass Transfer Process., J. Food Sci., 56, 1438-1445.
63. Hayakawa, K., Sakai, N. and Itaya, Y. 1992. Strain-Stress Formation in Food undergoing a Heat and Moisture Transfer Process., Advances in Food Engineering, Ed. R. P. Singh and M. A. Wirakartakusumah, CRC Press, pp.463-474.
64. Zoerb, G. C. and Hall, C. W. 1958. Some Mechanical and Rheological Properties of Grains., J. Agric. Engng. Res., 5, 83-92.
65. Chen, P. and Fridley, R. B. 1972. Analytical Methods for Determining Viscoelatic constants of Agricultural Material., Trans, ASAE. 15, 1103-1106.
66. Herum, F. L., Mensah, J. K., Barre, H. J. and Majickadeh, K. 1979. Viscoelastic Behavior of Soybean due to Temperature and Moisture Content, Trans. ASAE, 22, 1219-1224.
67. Hammerle, J. R. 1972. Theoretical Analysis of Failure in Viscoelastic Slab Subjected to Temperature and Moisture Gradients., Trans. ASAE, 15, 960-965.
68. Rao, V. N. M. 1975. Stresses in a Maxwell Viscoelastic Cylinder due to Transient Temperature and Moisture Gradients., Trans. ASAE, 18, 1165-1169.
69. Rao, V. N. M., Hamann, D. D. and Hammerle, J. R. 1975. Stress Analysis of a Viscoelastic Sphere Subjected to temperature and moisture gradients., J. Agric. Engng. Res., 20, 283-293.
70. Litchfield, J. B. and Okos, M. R. 1988. Prediction of Corn Kernel Stress and Breakage Induced by Drying, Tempering and Cooking., Trans. ASAE, 31, 585-594.
71. Haghighi, K. and Segerlind, L. J. 1988. Failure of Biomaterials Subjected to Temperature and Moisture Gradients Using the Finite Element Method: I - Thermo-Hydro Viscoelasticity., Trims. ASAE, 31(3), 930-937.
72. Haghighi, K. and Segerlind, L. J. 1988. Failure of Biomaterials Subjected to Temperature and Moisture Gradients Using the Finite Element Method: II - Stress Analysis of an Isotropic Sphere during Drying., Trans. ASAE, 31(3), 938-946.
73. Irudayaraj, J. and Haghighi, K. 1993. Stress Analysis of Viscoelastic Materials during Drying: I - Theory and Finite Element Formulation., Drying Technology, 11(5), 901-927.
74. Irudayaraj, J., Haghighi, K. and Stroshine, R. 1993. Stress Analysis of Viscoelastic Materials during Drying: II - Application to Grain Kernels., Drying Technology, 11(5), 929-959.
75. Itaya, Y., Kohayashi, T. and Hayakawa, K. 1995. Three-Dimensional Heat and Moisture Transfer with Viscoelaslic Strain-Stress Formation in Composite Food during Drying., Int. J. Heat Mass Transfer, 38(7), 1173-1185.
76. Mrani, I., Fras, G. and Benet, J. C. 1995. Numerical Study of Drying Stresses in Agar Gel. Deying Technology, 13(3), 551-570.