A generic approach for a micro parts feeding system

IFIP International Federation for Information Processing

Volumn 198, Issue , 2006, Pages 43-52

  Paris, M ^a   Perrard, C ^a   Lutz, P ^a  

^a FEMTO ST INSTITUTE   (France)

Author keywords

Classification scheme; Feeding; Microfactory

Indexed keywords

FEEDING;

CLASSIFICATION SCHEME; GENERIC APPROACH; MICRO-FACTORY; MICRO-PARTS FEEDING; NEW APPROACHES;

ASSEMBLY;

EID: 33749168549     PISSN: 15715736     EISSN: None     Source Type: Book Series    
DOI: 10.1007/0-387-31277-3_5     Document Type: Article

References (48)

1. Ataka, M. et al. (1993a). Fabrication an Operation of Polyimide Bimorph Actuors for a Ciliary Motion System. Journal of Microelectromechanical Systems, 2(4):146-150.
2. Ataka, M., Omodaka, A., and Fujita, H. (1993b). A Biometric Micro Motion System ∼A Ciliary Motion System∼. In Sensors and Actuators, pages 38-41, Yokohama, Japan.
3. Benecke. W. and Riethmller, W. (1989). Application of Silicon-Microactuators Based on Bimorph Structures. In Proc. of the IEEE MEMS Workshop, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots, pages 116-120, Salt Lake City, USA.
4. Böhringer, K. F., Donald, Bruce R., and MacDonald, N. C. (1996). What Programmable Vertor Fields Can (and Cannot) Do: Force Field Algorithms for MEMS and Vibratory Plate Parts Feeders. In Proc. ICRA, Mineapolis, USA.
5. Böhringer, K. F. et al. (1994). Sensorless Manipulation Using Massively Parallel Micofabricated Actuator Arrays. In Proc. ICRA, volume 1, pages 826-833, San Diego, USA.
6. Böhringer, K. F. et al. (1997). Computational Methods for Design and Control of MEMS Micromanipulator Arrays. IEEE Computational Science & engineering.
7. Böhringer, K. F. et al. (1998). Parallel microassembly with Electrostatic Force Field. In Proc. ICRA, pages 1204-1211, Leuven, Belgium.
8. Böhringer, K.F., Fearing, R.S., and Goldberg, K. Y. (1999). Microassembly. In Nof, Shimon, editor, The Handbook of Industrial Robotics, pages 1045-1066. John Wiley & Sons, seconde edition.
9. Brussel, H. Van et al. (2000). Assembly of microsystems. Annals of the CIRP, 49(2):451-472.
10. Chapuis, Y-A. et al. (2003). Les Microsystmes Intelligents: Technologies et Applications. In Journées Scientifiques Francophones: JSF.
11. Desai, A., Lee, S-W.,, and Tai, Y-C. (1999). A MEMS ELECTROSTATIC PARTICLE TRANSPORTATION SYSTEM. Sensors and Actuators, A: PHYSICAL.
12. Donald, B. R. et al. (2003). Power Delivery and Locomotion Unthered Microactuators. Journal of Microelectromechanical Systems, 12(6):947-959.
13. Ebefors, T. (2000). POLYIMIDE V-GROOVE JOINTS FOR THREE - DIMENSIONAL SILICON TRANSDUCERS. PhD thesis, ROYAL INSTITUTE OF TECHNOLOGY (KTH), Stockholm, Sweden.
14. Fantoni, G. and Santochi, M. (2004). A contactless linear movement of mini and microparts. In Proc. of the IMG04, Genova, Italy.
15. Ferreira, A. (2000). Design of a Flexible Conveyer Microrobot with Electromagnetic Field Based Friction Drive Control for Microfactory Stations. Journal of Micromechatronics, 1(1):49-66.
16. Ferreira, A., Cassier, C., and Hirai, S. (2004). Automatic Microassembly System Assisted by Vision Servoing and Virtual Reality. IEEE/ASME TRANSACTIONS ON MECHATRONICS, 9(2):321-333.
17. Fukuta, Y. et al. (2003). Pneumatic Two-Dimesional Conveyance System for autonomous Distributed MEMS. In The 12th International Conference on Solid-State Sensors, Actuors and Microsystems, pages 1019-1022, Boston, USA.
18. Gengenbach, U. and Boole, J. (2000). electrostatic feeder for contactless transport of miniature and microparts. In Proceeding of SPIE Microrobotics and Microassembly II, volume 4194, pages 73-81.
19. Goosen, J.F.L and Wlffenbuttel, R.F. (1995). Object Positionning Using a Surface Micromachined Distributed System. In The 8th International Conference on Solid-State Sensors and Actuors, and Eurosensors IX, volume 2, pages 396-399, Stockholm, Sweden,
20. Haake, A. and Dual, J. (2003). Paricle positionning by a two- or three-dimensional ultrasound field excited by surface waves. In WCU, Paris, France.
21. Hill, M. et al. (2003). A microfabricated ultrasonic particle manipulator with frequency selectable nodal planes. In WCU, Paris, France.
22. Hirata, T. et al. (1998). A Novel Pneumatic Actuator System Realised by Microelectro-Discharge Machining. In Proceeding of the 11th International Workshop on Micro Electro Mechanical Systems (MEMS'98), pages 160-165, Heildelberg, Germany.
23. Huang, J-T. et al. (2004). Separate and Manipulate Different Kind of Particles by Dielectrophoresis. Tamkang Journal of Science and Engineering, 7(2):87-90.
24. Iizuka, T. et al. (1994). A Micro X-Y-theta Conveyor by Superconducting Magnetic Levitation. In IEEE Symposium on Emerging Technologies and Factory Automation, ETFA'94, pages 62-67, IIS The University of Tokyo.
25. Kim, D-H. et al. (2004). High-Troughput Cell Manipulation Using Ultrasound Fields. In Proceedings of the 26th Annual International Conference of the IEEE EMBS, pages 2571-2574, San Francisco, USA.
26. Kim, Y-K., Katsurai, M., and Fujita, H. (1990). Fabrication and testing of a micro supraconducting actuator using the Meissner effect. In Proceedings of IEEE 3rd International Workshop on Micro Electro Mechanical Sytems (MEMS'90), pages 61-66, Napa Valley, USA.
27. Konishi, S. and Fujita, H. (1994). A Conveyance System Using Air Flow Based on tne Concept of Distributed Micro Motion Systems. Journal of Microelectromechanical Systems, 3(2):54-58.
28. Liu, C. (1995). A micromachined permalloy magnetic actuor array for micro-robotics assembly systems. In International Conference of Solid-Sate Sensors and Actuors, Stockholm, Sweden.
29. Masudo, T. and Okada, T. (2001). Ultrasonic radiation - novel principle for microparticle separation. In ANALYTICAL SCIENCES, volume 17 SUPPLEMENT, pages il341-il344. The Japan Society for Analytical Chemistry.
30. Mitani, A., Sugano, N., and Hirai, S. (2005). Micro-parts feeding by a saw-tooth surface. In Proc. ICRA, Barcelona, Spain.
31. Moesner, F. M. and Higuchi, T. (1997). Contactless manipulation of microparts by electric field traps. In Proceedings of the SPIE's International Symposium on Microrobotics and Microsystem Fabrication, volume 3202, pages 168-175, Pittsburgh.
32. Moesner, F. M., Higuchi, T., and Tanii, Y. (1996). New considerations for traveling wave particle handling. In IEEE Industry Application Society Conference Record, 31st Annual Meeting, pages 1986-1993, San Diego.
33. Nakasawa, H. et al. (1997). The two-dimensional micro conveyor. In International Conference of Solid-State Sensors and Actuators, Transducer'97, pages 33-36, Chicago, USA.
34. Nakasawa, H. et al. (1999). Electromagnetic Micro-Parts Conveyer with Coil-Diode Modules. In The 10th International Conference on Solid-State Sensors and Actuators, volume 2 of Transducer'99, pages 1192-1195, Sendai, Japan.
35. Regnier, S., Rougeot, P., and Chaillet, N. (2004). Modélisation des effets microscopiques pour la micro-manipulation. In Troisième journée du réseau thémalique pluridisciplinaire microrobotique.
36. Sin, J. and Stephanou, H. (2003). A parallel micromanipulation method for microassembly. In Proceeding of SPIE: Micromachining and Microfabrication Process Technology VII, volume 4557, pages 157-164.
37. Smela, E. and Kallenbach, M. (1999). Electrochemically Driven Polypyrrole Bilayers for Moving and Positionging Bulk Micromachined Silicon Plates. Journal of microelectromechanical systems, 8(4).
38. Suh, J. W. et al. (1997). Organic thermal and ectrostatic ciliary microactuor array for object manipulation. Sensor and Actuors: A, 58:51-60.
39. Suh, J. W. et al. (1999). CMOS Integrated Ciliary Actuato Array as a General-Purpose Micromanipulation Tool for Small Objects. Journal of Microelectromechanical Systems, 8(4):483-496.
40. Tabata, O. et al. (2002). Ciliary motion actuator using self-oscillating gel. Sensors and Actuators: A 95, pages 234-238.
41. Tichem, M. et al. (2004). A classification scheme for quantitative analisys of micro-frip principles. Assembly Automation, 24(1):88-93.
42. Varstenbosch, J-M. et al. (2004). Theory and experiments on vibration feeding off small parts in the presence of adhesive forces. In IPAS 2004, Bad hofgastein, Austria.
43. Wautelet, M. and Guisbiers, G. (2003). Macro, micro et nanosystèmes: des physiques différentes? SFT: Congrès franais de thermique.
44. Whitney, D. E. (2004). Mechanical Assemblies. Oxford University Press.
45. Zheng, L. et al. (2003). Towards Single Molecule Manipulation with Dielectrophoresis using Nanoelectrodes. In Proceedings of the Third IEEE Conference on Nanotechnology, volume 1, pages 437-440.
46. Zheng, W., Buhlmann, P., and Jacons, H. O. (2004). Sequential shape-and-solder-directed self-assembly of functional microsystems. PNAS, 101(35):12814-12817.
47. Zhou, Q. et al. (2004). Microassembly system with controlled environment. Journal of Micromechatronics, 2, Issue 3:227-248.
48. Zhou, Y. and Nelson, B. J. (2000). The Effect of Material properties and Gripping Force on Micrograsping. In ICRA, pages 1115-1120, San Francisco, USA.