A polysilicon nanoelectrospray-mass spectrometry source based on a microfluidic capillary slot

Sensors and Actuators, B: Chemical

Volumn 106, Issue 2, 2005, Pages 741-749

  Arscott, Steve ^a   Gac, Séverine Le ^b   Rolando, Christian ^b  

^a INSTITUT D ELECTRONIQUE   (France)

^b UNITÉ DE CATALYSE ET DE CHIMIE DU SOLIDE   (France)

Author keywords

Lab on a chip; Mass spectrometry; Micro TAS; Microfluidics; Nanoelectrospray ionisation; Proteomics; Silicon microtechnology

Indexed keywords

CAPILLARY FLOW; CHEMICAL VAPOR DEPOSITION; ELECTRIC POTENTIAL; IONIZATION; MASS SPECTROMETRY; MICROELECTROMECHANICAL DEVICES; MICROMACHINING; NANOSTRUCTURED MATERIALS; PROTEINS; SOLUTIONS;

LAB-ON-A-CHIP; MICRO-TAS; MICROFLUIDICS; NANOELECTROSPRAY IONIZATION; PROTEOMICS; SILICON MICROTECHNOLOGY;

POLYSILICON;

EID: 17644389929     PISSN: 09254005     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.snb.2004.09.026     Document Type: Article

References (38)

1. H. Anderson, and A. Van den Berg Microfluidic devices for cellomics: a review Sens. Actuators B 92 2003 315 325
2. D. Reyes, D. Iossifidis, P. Auroux, and A. Manz Micro Total Analysis Systems. 1. Introduction, theory and technology Anal. Chem. 74 2002 2623 2636
3. D. Figery, and D. Pinto Proteomics on a chip: promising developments Electrophoresis 22 2001 208 216
4. J. Voldman, M. Gray, and M.A. Schmidt Microfabrication in biology and medicine Annu. Rev. Biomed. Eng. 1 1999 401 425
5. M.S. Wilm, and M. Mann Analytical properties of the nanoelectrospray ion source Anal. Chem. 68 1996 1 8
6. G.A. Valaskovic, and F.W. McLafferty Long-lived metallized tips for nanoliter electrospray mass spectrometry J. Am. Soc. Mass Spectrom. 7 1996 1270 1272
7. Q. Xue, F. Foret, Y.M. Dunayevskiy, P.M. Zavracky, N.E. McGruer, and B.L. Karger Mulitchannel microchip electrospray mass spectrometry Anal. Chem. 69 1997 426 430
8. R.S. Ramsey, and J.M. Ramsey Generating electrospray from microchip devices using electroosmotic pumping Anal. Chem. 69 1997 1174 1178
9. B. Zhang, H. Liu, B.L. Karger, and F. Foret Microfabricated devices for capillary electrophoresis-electrospray mass spectrometry Anal. Chem. 71 1999 3258 3264
10. C. Yuan, and J. Shiea Sequential electrospray analysis using sharp tip channels fabricated on a plastic chip Anal. Chem. 73 2001 1080 1083
11. J. Kameoka, R. Orth, B. Ilic, D. Czaplewski, T. Wachs, and H.G. Craighead An electrospray ionisation source for integration with microfluidics Anal. Chem. 74 2002 5897 5901
12. G.A. Schultz, T.N. Corso, S.J. Prosser, and S. Zhang A fully integrated monolithic microchip electrospray device for mass spectrometry Anal. Chem. 72 2000 4058 4063
13. P. Griss, J. Melin, J. Sjodahl, J. Roeraade, and G. Stemme Development of micromachined hollow tips for protein analysis based on nanoelectrospray ionisation mass spectrometry J. Micromech. Microeng. 12 2002 682 687
14. A. Desai, Y.-C. Tai, M.T. Davis, and T.D. Lee Electrospray nozzle for mass spectrometry Proceedings of the International Conference on Solid-State Sensors and Actuators Transducers 1997
15. L. Lin, and P. Pisano Silicon processed micro-needles IEEE J. Micromech. Syst. 8 1999 78 84
16. J.S. Kim, and D.R. Knapp Microfabricated PDMS multichannel emitter for electrospray ionisation mass spectrometry J. Am. Soc. Mass Spectrom. 12 2001 463 469
17. V. Gobry, J. Oostrum, M. Martinelli, T.C. Rohner, F. Reymond, J.S. Rossier, and H.H. Girault Microfabricated polymer injector for direct mass spectrometry Proteomics 2 2002
18. M.S. Wilm, and M. Mann Electrospray and Taylor-cone theory, Dole's beam of macromolecules at last? Int. J. Mass Spectrom. Ion Processes 136 1994 167 180
19. S. Arscott, S. Le Gac, C. Druon, P. Tabourier, and C. Rolando A micro-nib nanoelectrospray source for mass spectrometry Sens. Actuators B 98 2004 140 147
20. J.M. Bustillo, R.T. Howe, and R.T. Muller Surface micromachining for microelectromechanical systems Proc. IEEE 86 8 1998 1552 1574
21. R.T. Howe, and R.S. Muller Polycrystalline silicon micromechanical beams J. Electrochem. Soc. 130 6 1983 1420 1423
22. R.T. Howe, and R.S. Muller Stress in polycrystalline and amorphous silicon thin films J. Appl. Phys. 54 8 1983 4674 4675
23. J.W. Berenschot, N.R. Tas, T.S.J. Lammerink, M. Elwenspoek, and A. van den Berg Advanced sacrificial poly-Si technology for fluidic systems J. Micromech. Microeng. 12 2002 621 624
24. H. Lorenz, M. Despont, M. Fahrni, N. LaBianca, P. Vettiger, and P. Renaud SU-8: a low-cost negative resist for MEMS J. Micromech. Microeng. 7 1997 121 124
25. H. Guckel, T. Randazzo, and D.W. Burns A simple technique for the determination of mechanical strain in thin films with applications to polysilicon J. Appl. Phys. 57 5 1985 1671 1675
26. S. Lucas, K. Kis-Sion, J. Pinel, and O. Bonnaud Polysilicon cantilever beam using surface micromachining technology for applications in microswitches J. Micromech. Microeng. 7 1997 159 161
27. T.P. Burg, and S.R. Manalis Suspended microchannel resonators for biomolecular detection Appl. Phys. Lett. 83 13 2003 2698 2700
28. W.N. Sharpe Jr., B. Yuan, R. Vaidyanathan, and R.L. Edwards Measurement of Young's modulus, Poissons's ratio and tensile strength of polysilicon Proceedings of the 10th IEEE International Workshop on Microelectricalmechanical Systems Nagoya, Japan 1997 424 429
29. D. Maier-Schneider, J. Maibach, E. Obermeier, and D. Schneider Variations in Young's modulus and intrinsic stress of LPCVD-polysilicon due to high-temperature annealing J. Micromech. Microeng. 5 1995 121 124
30. W.N. Sharpe Jr., S.B. Brown, G.C. Johnson, and W. Knauss Round-robin tests of modulus and strength of polysilicon Microelectromechanical Structures for Materials Research San Francisco, CA 1998 57 65
31. L. Chen, J. Miao, L. Guo, and R. Lin Control of stress in highly doped polysilicon multi-layer diaphragm structures Surf. Coat. Technol. 141 1 2001 96 102
32. X. Zhang, T.-Y. Zhang, M. Wong, and Y. Zohar Rapid thermal annealing of polysilicon thin films J. Microelectromech. Syst. 7 4 1998 356 364
33. J. Yang, H. Kahn, A.-Q. He, S.M. Phillips, and A.H. Heuer A new technique for producing large-area as-deposited zero-stress LPCVD polysilicon films: the multipoly process IEEE J. Microelectromech. Syst. 9 4 2000 485 494
34. H. Guckel, J.J. Sniegowski, T.R. Cristenson, S. Mohney, and T.F. Kelly Fabrication of micromechanical devices from polysilicon films with smooth surfaces Sens. Actuators 20 1989 117 122
35. U. Schnakenberg, W. Benecke, and P. Lange TMAH etchants for silicon micromachining Tech. Digest 6th Int. Conf. Solid State Sens. Actuators (Transducers) San Francisco 1991 815 818
36. O. Tabata, R. Asahi, H. Funabashi, and S. Sugiyama Anisotropic etching of Si in TMAH Sens. Actuators A 43 1992 51 57
37. J. Buhler, F.-P. Steiner, and H. Baltes Silicon dioxide sacrificial layer etching in surface micromachining J. Micromech. Microeng. 7 1997 R1 R13
38. M. Brinkmann, S. Arscott, S. Le Gac, C. Druon, P. Tabourier, C. Rolando, Microfluidic design principles of capillary slot-based electrospray sources, Appl. Phys. Lett., accepted for publication.