Process intensification: Engineering for efficiency, sustainability and flexibility

Process Intensification: Engineering for Efficiency, Sustainability and Flexibility

Volumn , Issue , 2008, Pages 1-444

  Reay, David ^a   Ramshaw, Colin ^a   Harvey, Adam ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85133250630     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-7506-8941-0.X0001-6     Document Type: Book

References (426)

1. Anon, (1998). Enhanced energy efficiency through the ultrasonic refining of glass. Future Practice Report No. 68, Energy Efficiency Best Practice Programme, UK, March.
2. Anon, (1994). Process intensification: its potential in effluent treatment processes. Energy Efficiency Best Practice Programme R&D Profile 44, May.
3. Anon, (2000). The microwave-assisted gas firing of ceramics. Energy Efficiency Best Practice Programme Future Practice Profile 57, March.
4. Anon, (2008). Surrey Satellite Technology Limited, . http://www.sstl.co.uk.
5. Anon, (2007a). Pursuit Dynamics brochure. See . http://www.pursuitdynamics.com.
6. Anon, (2007b). http://www.protensive.co.uk/pages/technologies/single/categoryid=food/rowid=15.
7. Atanasiu N.E. Intensification of tube drawing by axial ultrasonic oscillation of the plug. Ultrasonics 1980, 255-260. November.
8. Burdo O.G., Kovalenko E.A., Kharenko D.A. Intensification of the processes of low-temperature separation of food solutions. Applied Thermal Engineering 2008, 28:311-316.
9. Choe W.-S., Nian R., Lai W.-B. Recent advances in biomolecular process intensification. Chemical Engineering Science 2006, 886-906.
10. Dexter, A. (2001). Process intensification in the food industry. Proceedings of Welsh Meeting on Process Intensification, Energy Efficiency Office, December.
11. Dunn J. New spin on mixing and heating. Food Manufacture 2007, See http://www.foodmanufacture.co.uk/news.
12. Dutta P.K., Ray A.K. Experimental investigation of Taylor vortex photocatalytic reactor for water purification. Chemical Engineering Science 2004, 59:5249-5259.
13. Fee, C.J. and Chand, A. (2006). Intensification of minor milk protein purification processes. Proceedings of the 2nd Conference on Process Intensification and Innovation, Christchurch, New Zealand, September 24-29.
14. Fikiin A.G. Etude des facteurs d'intensification de l'echange de chaleur dans le refroidissement des fruits et legumes. Int. J. Refrigeration 1983, 6(3):176-181.
15. Gogate P.R. Treatment of wastewater streams containing phenolic compounds using hybrid techniques based on cavitation: a review of the current status and the way forward. Ultrasonics Sonochemistry 2008, 15(1):1-15.
16. Goodacre, C. (2001). Process Intensification: relevance to the food industry. Proceedings of the 6th Process Intensification Network Meeting, Jesus College, Cambridge University, 27 November. See . http://www.pinetwork.org.
17. Green R. Back to the future. Nuclear Engineering International 2003, 36-39. September.
18. Harvey, A.P. (2006). Biodiesel process intensification projects at Newcastle University. Proc. PIN Meeting, 16 November. See . http://www.pinetwork.org.
19. Jackson, R. (2007). The BHR Biofuels intensified biodiesel production route. Proceedings of the 15th PIN Meeting, Cranfield University, October. See . http://www.pinetwork.org.
20. Li, X., Le Pierres, R. and Dewson, S.J. (2006). Heat exchangers for the next generation of nuclear reactors. Proceedings of ICAPP'06, Paper 6105, Reno, NV, USA, June 4-8.
21. Miladinovic, N. and Weatherley, L.R. (2006). Intensification of ammonia removal in a combined ion-exchange and nitrification column. Proceedings of the 2nd Conference on Process Intensification and Innovation, Christchurch, New Zealand, September 24-29.
22. Mishchuk N., Kornilovich B., Klishchenko R. pH regulation as a method of intensification of soil electroremediation. Colloids and Surfaces A: Physicochem. Eng. Aspects 2007, 306:171-179.
23. Moholkar V.S., Warmoeskerken M.M.C.G. Investigations in mass transfer enhancement in textiles with ultrasound. Chemical Engineering Science 2004, 59:299-311.
24. Muralidhara, H.S. (2006). Role of process intensification in food and bioprocessing for the 21st century: challenges and opportunities. Proceedings of the 2nd Conference on Process Intensification and Innovation, Christchurch, New Zealand, September 24-29.
25. Pickering, S.J. (1997). Process intensification for wastewater treatment - a direction for the future? Proceedings of Environmental Engineering Research Event, Noosa, Queensland, Australia, pp. 129-134.
26. Poynton, T.R. (2006). PI in food and drink processing - opportunities, barriers and some solutions to savour. Presentation at PIN Meeting, Newcastle University, November. See for presentation. http://www.pinetwork.org.
27. Presteigne, K. (1997). Improved castings and enhanced energy efficiency with power ultrasound. EEBPP Future Practice R&D Profile 55, March.
28. Reay, D.A. (1999). Learning from experiences with compact heat exchangers. CADDET Analysis Series No. 25, Sittard, The Netherlands.
29. Roy R., Agrawal D., Cheng J., Gedevanishvili S. Full sintering of powdered-metal bodies in a microwave field. Nature 1999, 399:670-688. 17 June.
30. Ryan C. Mixer doubles Courtelle output. Plant and Control Engineering 2000, (9):27. June.
31. Sengupta B., Sengupta R., Subrahmanyam N. Process intensification of copper extraction using emulsion liquid membranes: experimental search for optimal conditions. Hydrometallurgy 2006, 84(1-2):43-53.
32. Timoshenko A.V., Magurova Yu.V. Investigation of plasma electrolytic oxidation processes of magnesium alloy MA2-1 under pulse polarisation modes. Surface and Coatings Technology 2005, 199:135-140.
33. Van der Bruggen B., Curcio E., Drioli E. Process intensification in the textile industry: the role of membrane technology. J. Environmental Management 2004, 73:267-274.
34. Warmoeskerken M.M.C.G., van der Vlist P., Moholkar V.S., Nierstrasz V.A. Laundry process intensification by ultrasound. Colloids and Surfaces A: Physicochem. Eng. Aspects, 2002, 210:277-285.
35. Weatherley L.R., Rooney D. Enzymatic catalysis and electrostatic process intensification for processing of natural oils. Chemical Engineering Journal 2008, 135:25-32.
36. Weidner, E., Renner, M., Geihsler, H. and Brandin, G. (2007). Production of leather under the influence of compressed carbon dioxide. Proceedings of the European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September.
37. Yachmenev V.G., Blanchard E.J., Lambert A.H. Use of ultrasonic energy for intensification of the bio-preparation of greige cotton. Ultrasonics 2004, 42:87-91.
38. Anon, (2005a). Toshiba's DMFC officially certified as world's smallest by Guinness World Records. Toshiba Press Release. http://www.toshiba.co.jp/about/press/2005_02/pr2801.htm.
39. Anon, (2005b). The climate change challenge. Scientific evidence and implications. CTC502, The Carbon Trust.
40. Anon, (2005c). Carbon Trust research landscape study. CTC511. http://www.thecarbontrust.co.uk.
41. Anon (2006). Building a business case on Process Intensification. Unpublished report, Arthur D. Little and SenterNovem, July.
42. Chen C.Y., Tsao C.S. Characterisation of electrode structures and the related performance of direct methanol fuel cells. J. Hydrogen Energy 2006, 31:391-398.
43. Deshmukh S.A.R.K., Heinrich S., Moerl L., van Sint Annaland M., Kuipers J.A.M. Membrane assisted fluidized-bed reactors: potentials and hurdles. Chemical Engineering Science 2007, 62:416-436.
44. Fishlock D. Gravity: new essence of distillation. Financial Times 1982, 33. Thursday 11 November.
45. Hahn H. Market pull meets technology push. Degussa Science Newsletter 2005, (10):4-6.
46. Harvey, A.P. (2006). Biodiesel process intensification projects at Newcastle University. Presentation to PIN, 16 November. See . http://www.pinetwork.org.
47. Haugwitz S., Hagander P., Noren T. Modelling and control of a novel heat exchanger reactor, the Open Plate Reactor. Control Engineering Practice 2007, 15:779-792.
48. The Flixborough disaster: report of the Court of Inquiry 1975, Health and Safety Executive, HMSO.
49. Hendershot D.C. Inherently safer chemical process design. J. Loss Prev. Process. Ind. 1997, 10:51-157.
50. Hendershot D.C. Process intensification for safety. Chapter 13. Re-engineering the Chemical Process Plant: Process Intensification 2004, Dekker, New York. A. Stankiewicz, J.A. Moulijn (Eds.).
51. Keller G.E., Bryan P.F. Process engineering: moving in new directions. Chemical Engineering Progress 2000, January:41-50.
52. Kletz T.A. Plant Design for Safety 1991, The Institution of Chemical Engineers, Rugby, UK.
53. Neveu, S. (2002). Potential benefits of process intensification for Rhodia. Proceedings of 3rd meeting of the Process Intensification Network, Cranfield University, 14 November. See for overheads and minutes. http://www.pinetwork.org.
54. Nikoleris D., Arias R., O'Conner M. Delphi study on process intensification technologies 2002, MSc Project, Heriot-Watt University, Edinburgh, Available on www.pinetwork.org.
55. Ramshaw C. Process intensification by miniature mass transfer. Process Engineering 1983, January.
56. Reay, D.A. (2007). The role of process intensification in cutting greenhouse gas emissions. Plenary paper, Proceedings of PRES 07, Ischia, June.
57. Stankiewicz A.I., Moulijn J.A. Process intensification: transforming chemical engineering. Chemical Engineering Progress 2000, January:22-34.
58. Web 1. (2007). US Department of Energy: energy efficiency and renewable energy. See . http://www.eree.energy.gov/industry/saveenergynow.
59. Anon, (1932). Dampferzeuger mit Turbine z.V.D.I Bd. 76, No. 41.
60. Anon, (1946). Vorkauf rotating boiler (Drehkessel) and rotating boiler gas turbine (Drehkessel Turbine). British intelligence objectives sub-committee final report No. 931, item no. 29, London, HMSO.
61. Balmer R.T. The hygrocyst - a stability phenomenon in continuum mechanics. Nature 1970, 227:600-601.
62. Charpentier J.-C. In the frame of globalisation and sustainability, Process Intensification, a path to the future of chemical and process engineering (molecules into money). Chemical Engineering Journal 2007, 134:84-92.
63. Coney, J.E.R. (1971). Taylor vortex flow with special reference to rotary heat exchangers. PhD thesis, Dept. Mechanical Eng., Leeds University.
64. Cooper A. The world below zero: a history of refrigeration. Part 25. ACR News 1990, 50-52.
65. Costello C.P., Adams J.M. Burn-out fluxes in pool boiling at high accelerations 1960, Report of Mech. Eng. Dept., University of Washington, Washington DC.
66. Cross, W.T. and Ramshaw, C. (1985). Centrifugal heat pump. US Patent 4553408, filed 9 March 1984, issued 19 November 1985.
67. Daniels T.C., Al-Jumaily F.K. Investigations of the factors affecting the performance of a rotating heat pipe. Int. J. Heat and Mass Transfer 1975, 18:961-973.
68. Goebel, P. (1977). Polymerisation reactor with gilled-tube radiator and axial agitator. US Patent 4029143, 14 June.
69. Gray, V.H., Marto, P.J. and Joslyn, A.W. (1968). Boiling heat transfer coefficients, interface behaviour, and vapour quality in rotating boilers operating to 475 Gs. NASA TN D-4136, March.
70. Gray, V.H. (1969). The rotating heat pipe - a wickless, hollow shaft for transferring high heat fluxes. ASME Paper 69-HT-19, ASME, New York.
71. Hickman, K.C.D. (1936). UK Patent 482880, July.
72. Iversen, A.H. and Whitaker, S. (1991). Liquid cooled rotating anode. US Patent 5018181, May 21.
73. Moss, J. (1986). Still. US Patent 4597835, 1 July.
74. Pilo, C.W. and Dahlbeck, S.W. (1960). Apparatus for intimate contacting of two fluid media having different specific weight. US Patent 2941872, 21 June.
75. Podbielniak. (1935). US Patent 2044996.
76. Porter, J.E. and Ramshaw, C. (1988). Evaporator. US Patent 4731159, 15 March.
77. Ramshaw, C. (1986). Separation processes: The opportunities for exploiting centrifugal fields. Report for the Science and Engineering Research Council (now EPSRC), Oct.
78. Ramshaw C. Opportunities for exploiting centrifugal fields. Heat Recovery Systems and CHP 1993, 13(6):493-513.
79. Reay D.A., Kew P.A. Heat pipes: theory, design and applications 2006, Elsevier, Oxford. 5th edn.
80. Schwarz, R.P. and Wolf, D.A. (1991). Rotating bioreactor cell culture apparatus. US Patent 4988623, 29 Jan.
81. Schwarz, R.P. et al. (1991). Horizontally rotated cell culture system with a coaxial tubular oxygenator. US Patent 5026650, 25 June.
82. Web 1, (2007). Proceedings of the 14th Process Intensification Network Meeting, Grangemouth, April 2007. See . http://www.pinetwork.org.
83. Web 2, (1999). Minutes of the 2nd Meeting of Pin, DTI Conference Centre, 16 November. See . http://www.pinetwork.org.
84. Witt, M.S. (1986). Continuous polymerisation reactor. US Patent 4587314, 6 May.
85. Wightman E.P., Trivelli A.P.H., Sheppard S.E. Intensification of the latent image on photographic plates. J. Franklin Institute 1925, 200:335. 1925.
86. Winnington, T.L. (1999). The evolution of rotating process systems. Proceedings of the 3rd BHRG Conference on Process Intensification, Antwerp, Belgium, 25-27 October.
87. Allen P.H.G., Karayiannis T.G. Electrohydrodynamic enhancement of heat transfer and fluid flow. Heat Recovery Systems and CHP 1995, 15(5):389-423.
88. Anon, (2003). Method and apparatus for optically activating chemical reactions. Patent RU2210022, published 8 October. Source: European patent database.
89. Anon, (2007a). Company web site of Cal-Gavin Ltd. http://www.calgavin.co.uk.
90. Anon, (2007b). Company web site of Laminova AB. http://www.laminova.com.
91. Anon, (2007c). Virginia Tech high pressure processing web site. http://www.hpp.vt.edu.
92. Anon (2007d). Protensive web site. http://www.protensive.co.uk.
93. Bergles, A.E. (1999). Enhanced heat transfer: endless frontier, or mature and routine. Paper C565/082/99. Proceedings of the UK National Heat Transfer Conference, Heriot-Watt University. IMechE, Bury St Edmunds, September.
94. Bolshakov A.P., Konov V.I., Prokhorov A.M., Uglov S.A., Dausinger F. Laser plasma CVD diamond reactor. Diamond and Related Materials 2001, 10:1559-1564.
95. Briggs, A., Kelemenis, C. and Rose, J.W. (1999). Augmentation of in-tube condensation in the presence of non-condensing gas using wire inserts. Paper C565/065/99. Proceedings of the UK National Heat Transfer Conference, Heriot-Watt University. IMechE, Bury St Edmunds, September.
96. Butrymowicz D., Trela M., Karwacki J. Enhancement of condensation heat transfer by means of passive and active condensate drainage techniques. International Journal of Refrigeration 2003, 26:473-484.
97. Buxton, A.L. (2007). Surfi-Scult. Proceedings of the 25th HEXAG meeting, Newcastle University. See . http://www.hexag.org.
98. Cahill B.P., et al. Electro-osmotic pumping on application of phase-shifter signals to interdigitated electrodes. Sensors and Actuators B: Chemical 2005, 110 September:157-163.
99. Cecilia R., Kunz U., Turek T. Possibilities of process intensification using microwaves applied to catalytic microreactors. Chemical Engineering and Processing 2007, 46:870-881.
100. Chakinala A.G., Gogate P.R., Burgess A.E., Bremner D.H. Intensification of hydroxyl radical production in sonochemical reactors. Ultrasonics Sonochemistry 2007, 14:509-514.
101. Chen M., Yuan L., Liu S. Research on low temperature anodic bonding using induction heating. Sensors and Actuators A 2007, 133:266-269.
102. Cross W.T., Ramshaw C. Process intensification: laminar flow heat transfer. Chem. Eng. Res. Dev. 1986, 64:293-301. July.
103. Cuthbertson, G., McNeil, D.A. and Burnside, B. (1999). Dropwise condensation of steam over a bundle of tubes at utility turbine condenser pressure. Paper C565/051/99. Proceedings of the UK National Heat Transfer Conference, Heriot-Watt University. IMechE, Bury St Edmunds, September.
104. Elliott, D.C., and Sealock, L.J., Jr. (2005). Chemical processing in high-pressure aqueous environments. Proceedings of the 1st International Conference on Science, Engineering and Technology of Intensive Processing, University of Nottingham, 18-20 September.
105. Furberg, R. and Palm, B. (2007). A novel porous surface for enhancing heat transfer in pool and flow boiling. Proceedings of the Annex 33 Heat Pump Meeting, Stockholm. See . http://www.compactheatpumps.org.
106. Garnier N., Grigoriev R.O., Schatz M.F. Optical manipulation of microscale fluid flow. Physics Review Letters 2003, 91. Paper 054501.
107. Gogate P.R., Mujumdar S., Thampi J., Wilhelm A.M., Pandit A.B. Destruction of phenol using sonochemical reactors: scale up aspects and comparison of novel configuration with conventional reactors. Separation and Purification Technology 2004, 34:25-34.
108. Gomaa H., Al Taweel A.M., Landau J. Mass transfer enhancement at vibrating electrodes. Chemical Engineering Journal 2004, 97:141-149.
109. Handbook of Applied Thermal Design 1989, McGraw-Hill, New York. E.C. Guyer, D.L. Brownell (Eds.).
110. Hesselgreaves J.E. Compact Heat Exchangers - Selection, Design and Operation 2001, Pergamon, Oxford.
111. Janicke M.T., Kestenbaum H., Hagendorf U., Schüth F., Fichtner Maximilian, Schubert K. The controlled oxidation of hydrogen from an explosive mixture of gases using a microstructured reactor/heat exchanger and Pt/Al2O3 Catalyst. Journal of Catalysis 2000, 191:282-293. April.
112. Jensen K.F. Chemical and biological microsystems for discovery and scaling to production. Proceedings of the European Congress of Chemical Engineering (ECCE-6), Copenhagen 2007, 16-20. September.
113. Ji J-B., Lu X-H., Xu Z-C. Effect of ultrasound on adsorption of Geniposide on polymeric resin. Ultrasonics Sonochemistry 2006, 13:463-470.
114. Jones T.B. Electrohydrodynamic heat pipe. Int. J. Heat and Mass Transfer 1973, 16:1045-1048.
115. Karayiannis T.G. EHD boiling heat transfer enhancement of R123 and R11 on a tube bundle. Applied Thermal Engineering 1998, 18(9-10):809-817. September.
116. Kim S.-S., Lee H., Choi J.-W., Na B.-K., Song H.K. Methane conversion to higher hydrocarbons in a dielectric-barrier discharge reactor with Pt/?-Al2O3 catalyst. Catalysis Communications 2007, 8:1438-1442.
117. Laohalertdecha S., Naphon P., Wongwises S. A review of electrohydrodynamic enhancement of heat transfer. Renewable and Sustainable Energy Reviews 2007, 11:858-876.
118. Le Berre M., Chen Y., Crozatier C., Zhang Z.L. Electrocapillary force actuation of microfluidic elements. Microelectronic Engineering 2005, 78-79:93-99.
119. Lu W., Zhao C.Y., Tassou S.A. Thermal analysis on metal-foam filled heat exchangers. Part I: Metal-foam filled pipes. International Journal of Heat and Mass Transfer 2006, 49(15-16):2751-2761. July.
120. Metaxas A.C., Meredith R.J. Industrial Microwave Heating 1983, Peter Peregrinus Ltd. For: Institution of Electrical Engineers, Power Engineering Series 4, Stevenage.
121. Peel J., Howarth C.R., Ramshaw C. Process intensification: HiGee seawater deaeration. Chem. Eng. Res. Des. 1998, 76(A5):585-593. July.
122. Qian S., Bau H.H. Magneto-hydrodynamic stirrer for stationary and moving fluids. Sensors and Actuators B 2005, 106:859-870.
123. Reay D.A. Heat transfer enhancement - a review of techniques and their possible impact on energy efficiency in the UK. Heat Recovery Systems and CHP 1991, 11(1):1-40.
124. Stanley A.E., Godbey S.E. The laser-induced nitrations of several hydrocarbons. Applied Spectroscopy 1989, 43:674-681. May-June.
125. Takei G., Kitamori T., Kim H.B. Photocatalytic redox-combined synthesis of L-pipecolinic acid with a titania-modified microchannel chip. Catalysis Communications 2005, 6:357-360.
126. Toukoniitty B., Mikkola J.-P., Murzin D.Yu., Salmi T. Utilisation of electromagnetic and acoustic irradiation in enhancing heterogeneous catalytic reactions. Applied Catalysis A: General 2005, 279:1-22. 2005.
127. Van Gerven T., Mul G., Moulijn J., Stankiewicz A. A review of intensification of photocatalytic processes. Chemical Engineering and Processing 2007, 46:781-789.
128. Wang L., Sunden B. Performance comparison of some tube inserts. Int. Comm. Heat Mass Transfer, 2002, 29(1):45-56.
129. Weatherley L.R. Electrically enhanced mass transfer. Heat Recovery Systems and CHP 1993, 13(6):515-537.
130. Weatherley L.R., Rooney D. Enzymatic catalysis and electrostatic process intensification for processing of natural oils. Chemical Engineering Journal 2007, (In Press).
131. Webb R.L., Nae-Hyun K. Principles of Enhanced Heat Transfer 2005, Taylor & Francis, New York. 2nd edn.
132. Wu H-S., Liu C-H. A novel electrokinetic micromixer. Sensors and Actuators A 2005, 118:107-115.
133. Yan Y.Y., Zu Y.Q., Ren L.Q., Li J.Q. Numerical modeling of electro-osmotically driven flow within the micro-thin liquid layer near an earthworm surface - a biomimetic approach. Proc. IMechE 2007, 221. Part C: J. Mechanical Engineering Science.
134. Alm B., Imke U., Knitter R., Schygulla U., Zimmermann S. Testing and simulation of ceramic micro heat exchangers. Chemical Engineering Journal 2007, 135(Supplement 1):S179-sS184.
135. Anon, (1992a). Investigation of a novel compact heat exchanger surface. Future Practice -R&D Profile 29, Best Practice Programme, UK Carbon Trust, July.
136. Anon, (1992b). Plant design using multi-stream heat exchangers. Future Practice - R&D Profile 30, Best Practice Programme, UK Carbon Trust, September.
137. Boomsma K., Poulikakos D., Zwick F. Metal foams as compact high performance heat exchangers. Mechanics of Materials 2003, 35:1161-1176.
138. Choi S.B., et al. Liquid flow and heat transfer in microtubes. Micromechanical Sensors, Actuators and Systems 1991, 123-134. ASME DSC 32. Choi (Ed.).
139. Cross W.T., Ramshaw C. Process intensification: laminar flow heat transfer. Chem. Eng. Res. Des. 1986, 64:293-301. July.
140. Furberg, R. and Palm, B. (2007). A novel porous surface for enhancing heat transfer in pool and flow boiling. Presentations at IEA HP Annex 33 Meeting, Stockholm, May. See: . http://www.compactheatpumps.org.
141. Hasatani, M. (1998). Heat transfer application of chemically reacting systems. Proc. 11th IHTC, Vol. 1, August 23-28, Kyongju, Korea, Heat Transfer.
142. Hesselgreaves J.E. Compact Heat Exchangers. Selection, Design and Operation 2001, Pergamon, Oxford.
143. Janson S., et al. Micropropulsion systems for aircraft and spacecraft. Microengineering Aerospace Systems 1999, 657-696. The Aerospace Press and AIAA, USA. H. Helvajian (Ed.).
144. Jeng T-M., Tzeng S-C., Lin C-H. Heat transfer enhancement of Taylor-Couette-Poiseuille flow in an annulus by mounting longitudinal ribs on the rotating inner cylinder. International Journal of Heat and Mass Transfer 2007, 50(1-2):381-390.
145. Lockerby, D.A., Reese, J.M., Emerson, D.R. and Barber, R.W. (2004). Velocity boundary condition at solid wall in rarefied gas calculations. Phys. Rev. E., 3rd Series, Vol. 70, No. 1, Paper 017303, July.
146. Lockerby D.A., Reese J.M. High-resolution Burnett simulations of micro-Couette flow and heat transfer. J. Computational Physics 2003, 188:333-347.
147. Longsworth R.C. Heat exchangers for Joule Thomson cryocoolers. Aerospace Heat Exchanger Technology 1993, Elsevier, The Netherlands, 1993. R.K. Shah, A. Hashemi (Eds.).
148. Mala G.M., Li D. Flow characteristics of water in microtubes. Int. J. Heat and Fluid Flow 1999, 20:142-148.
149. Mehendale, S.S. et al. (1999) Heat exchangers at micro- and meso-scales. In: Compact Heat Exchangers and Enhancement Technology for the Process Industries. Proceedings of the International Conference, Banff, Canada, pp. 55-74, July 18-23.
150. Nanbu K. Analysis of the Couette flow by means of the new direct-simulation method. J. Phys. Soc. Jpn. 1983, 52:5.
151. Osakada K., Masanori S. Flexible manufacturing of metallic products by selective laser melting of powder. Int. J. Machine Tools and Manufacture 2006, 46(11):1188-1193.
152. Qin F., Chen J., Lu M., Chen Z., Zhou Y., Yang K. Development of a metal hydride refrigeration system as an exhaust-gas driven automobile air conditioner. Renewable Energy 2007, 32:2034-2052.
153. Smith E.M. Advances in Thermal Design of Heat Exchangers. A Numerical Approach: Direct-sizing, Step-wise Rating and Transients 2005, John Wiley, Chichester.
154. Tian J., Lu T.J., Hodson H.P., Queheillalt D.T., Wadley H.N.G. Cross-flow heat exchange of textile cellular metal core sandwich panels. International Journal of Heat and Mass Transfer 2007, 50:2521-2536.
155. Tsuzuki N., Kato Y., Ishiduka T. High performance printed circuit heat exchanger. Applied Thermal Engineering 2007, 27:1702-1707.
156. Wang L., et al. CFD simulation of aggregation and breakage processes in laminar Taylor-Couette flow. Journal of Colloid and Interface Science 2005, 282:380-396.
157. Zaheed L., Jachuck R.J.J. Review of polymer compact heat exchangers, with special emphasis on polymer film unit. Applied Thermal Engineering 2004, 24:2323-2358.
158. Zaheed L., Jachuck R.J.J. Performance of a square, cross-corrugated, polymer film, compact, heat-exchanger with potential application in fuel cells. Journal of Power Sources 2005, 140:304-310.
159. Zhao C.Y., Lu W., Tassou S.A. Thermal analysis on metal-foam filled heat exchangers. Part II: Tube heat exchangers. International Journal of Heat and Mass Transfer 2006, 49:2762-2770.
160. Agreda V.H., Partin L.R., Heise W.H. High-purity methyl acetate via reactive distillation. Chem. Eng. Prog. 1990, 86:40-46.
161. Aoune A., Ramshaw C. Process intensification: heat and mass transfer characteristics of liquid films on rotating discs. Int. J. Heat and Mass Trans. 1999, 42:2543.
162. Baird M.H.I., Harvey A.P., Mackley M.R., Ni X., Rama Rao N.V., Stonestreet P. Mixing through oscillations and pulsations: a guide to achieving process enhancements in the chemicals and process industries. Chem. Eng. Res. Des. 2003, 81:373-383.
163. Baird M.H.I., Stonestreet P. Energy-dissipation in oscillatory flow within a baffled tube. Chem. Eng. Res. Des. 1995, 3(A5):503-511.
164. Bell C. The hydrodynamics and heat transfer characteristics of liquid films on a rotating disc 1975, Vol. 1. PhD Dissertation, Newcastle University, Newcastle upon Tyne, UK.
165. Biery, J.C. (1977). Methanation: with high thermodynamic efficiency energy recovery. Los Alamos Laboratory Report LA-6656-MS. Los Alamos Laboratory, USA, January.
166. Brauner N., Maron B.M. Characteristics of inclined thin films, waviness and the associated mass transfer. Int. J. Heat and Mass Transfer 1982, 25:99-110.
167. Buback M., Vogele H.-P. Laser-induced high-pressure polymerisation of pure ethylene. Die Makromolekulare Chemie. Rapid Communications 2003, 6(7):481-484.
168. Burns J.R., Ramshaw C. Development of a microreactor for chemical production. Trans IChemE 1999, 77(Part A):206-211. May.
169. Carslaw H.S., Jaeger J.C. Conduction of Heat in Solids 1959, Oxford University Press, Oxford, p. 101. 2nd edn.
170. Caze, P. (2006) Engineered reactors for chemicals industrial production. Presentation at 14th PIN meeting, Grangemouth, Scotland. see . http://www.pinetwork.org.
171. Chisti Y. Sonobioreactors: using ultrasound for enhanced microbial productivity. Trends in Biotechnology 2003, 21(2):89-93.
172. Centi G., Dittmeyer R., Perathoner S., Reif M. Tubular inorganic catalytic membrane reactors: advantages and performance in multiphase hydrogenation reactions. Catalysis Today 2003, 79-80:139-149.
173. Dalglish, J. et al. (1999). Photo-initiated polymerisation using a spinning disc reactor. 3rd International Conference on Process Intensification for the Chemical Industry. BHR Group Conf. Series, Pub No 38.
174. Dluska E., Wronski S., Hubacz R. Mass transfer in gas-liquid Couette-Taylor flow reactor. Chemical Engineering Science 2001, 56:1131-1136.
175. Dutta P.K., Ray A.K. Experimental investigation of Taylor vortex photocatalytic reactor for water purification. Chemical Engineering Science 2004, 59:5249-5259.
176. Fabiyi M.E., Skelton R.L. The application of oscillatory flow mixing to photocatalytic wet oxidation. J. Photochemistry and Photobiology. A: Chemistry 1999, 129:17-24.
177. Fincke J.R., Anderson R.P., Hyde T., Detering B.A., Wright R., Bewley R.L., Haggard D.C., Swank W.D. Plasma thermal conversion of methane to acetylene. Plasma Chemistry and Plasma Processing 2002, 22(1). March.
178. Gao S., Ni X., Cumming R.H., Greated C.A., Norman P.I. Experimental investigation of particle flocculation in a batch oscillatory baffled reactor. Sci. and Technol. 1998, 33(14):2143-2157.
179. Gardner D. Electricity: a new power source for catalytic reactors. Chemistry in Britain 1991, 1120-1122. December.
180. Giordano R.L.C., Giordano R.C., Cooney C.L. Performance of a continuous Taylor-Couette-Poiseuille vortex flow enzymic reactor with suspended particles. Process Biochemistry 2000, 35(10):1093-1101.
181. Glasnov T.N., Kappe C.O. Microwave-assisted synthesis under continuous-flow conditions. Macromol. Rapid Commun. 2007, 28:395-410.
182. Gogate P.R. Treatment of wastewater streams containing phenolic compounds using hybrid techniques based on cavitation: a review of the current status and the way forward. Ultrasonics Sonochemistry 2008, 15:1-15.
183. Gogate P.R., Mujumdar S., Thampi J., Wilhelm A.-M., Pandit A.B. Destruction of phenol using sonochemical reactors: scale up aspects and comparison of novel configuration with conventional reactors. Separation and Purification Technology 2004, 34:25-34.
184. Groszek, M.A. (1990). The Torbed process: a novel concept in heat and mass transfer. Proceedings of the International Deep Mining Conference: Innovations in Metallurgical Plant, pp. 191-195. Johannesburg, SAIMM.
185. Haas M.J., Scott K.M., Marmer W.N., Foglia T.A. In situ alkaline transesterification: an effective method for the production of fatty acid esters from vegetable oils. Journal of the American Oil Chemists Society 2004, 81(1):83-89.
186. Harmsen G.J. Reactive distillation: the front-runner of industrial process intensification. A full review of commercial applications, research, scale-up, design and operation. Chemical Engineering and Processing 2007, 46:774-780.
187. Harvey, A.P. and Mackley, M.R. (2002). Intensification of two-phase liquid batch reactions using continuous oscillatory baffled reactors. AIChE Annual Meeting, Indianapolis, USA, November.
188. Harvey A.P., Stonestreet P. A mixing-based design methodology for continuous oscillatory baffled reactors. Chem. Eng. Res. Des. 2002, 80:31-44.
189. Harvey A.P., Mackley M.R., Seliger T. Process intensification of biodiesel production using a continuous oscillatory baffled reactor. J. Chem. Technol. and Biotechnol. 2003, 78:338-341.
190. Harvey A.P., Mackley M.R., Stonestreet P. Operation and Optimisation of an Oscillatory baffled reactor. Ind. Eng. Chem. Res. 2001, 40:5371-5377.
191. Harvey, A.P. (2006). Presentation at PIN meeting, Newcastle upon Tyne. See . http://www.pinetwork.org.
192. Haugwitz S., Hagander P., Noren T. Modelling and control of a novel heat exchanger reactor, the open plate reactor. Control Engineering Practice 2007, 15:779-792.
193. Haut B., Ben Amor H., Coulon L., Jacquet A., Halloin V. Hydrodynamics and mass transfer in a Couette-Taylor bioreactor for the culture of animal cells. Chemical Engineering Science 2003, 58(3-6):777-784.
194. Hendershot, D.C. (1999). Designing safety into a chemical process. Proceedings of the 5th Asia Pacific Responsible Case Conference and Chemical Safety Workshop, Shanghai, 7-10 November.
195. Jachuck R.J.J., Ramshaw C. Process intensification: heat transfer transfer characteristics of tailored rotating surfaces. Heat Recovery Systems and CHP 1994, 14:475.
196. Jones E., Weatherley L.R. Modelling the kinetics of lipase-catalysed oil hydrolysis in an electrically enhanced liquid-liquid system. J. Chemical Technology and Biotechnology, 2003, 78:194-198.
197. Kaneko H., et al. Water electrolysis under microgravity condition by parabolic flight. Electrochimica Acta 1993, 38(5):729.
198. Kang S.H., Goo S., Lee S.G., Jung W.M., Kim M.C., Kim W.S., Choi C.K., Feigelson R.S. Effect of Taylor vortices on calcium carbonate crystallization by gas-liquid reaction. Journal of Crystal Growth 2003, 254(1-2):196-205.
199. Kim S.-S., Lee H., Choi J.-W., Na B.-K., Song H.-K. Methane conversion to higher hydrocarbons in a dielectric-barrier discharge reactor with Pt/?-Al2O3 catalyst. Catalysis Communications 2007, 8:1438-1442.
200. Koerfer, M. (1986). Hydrodynamics and mass transfer of thin liquid films flowing on rotating perforated discs. Departmental Report, Chem. Eng. Dept., Newcastle University, Newcastle upon Tyne, UK.
201. Krishna R. Reactive separations: more ways to skin a cat. Chemical Engineering Science 2002, 57:1491-1504.
202. Reactive Separation Processes 2002, Taylor & Francis, New York. S. Kulprathipanji (Ed.).
203. Kundu, A., Ahn, J.E., Park, S.-S., Shul, Y.G., Han, H.S. (2007). Process intensification by micro-channel reactor for steam reforming of methanol. Chemical Engineering Journal, doi:10.1016/j/cej.2007.02.026.
204. Kreido Laboratories, (2004). Our STT Technology. http://www.kreido.com/stt.htm.
205. Lee C.T., Mackley M.R., Stonestreet P., Middelberg A.P.J. Protein refolding in an oscillatory baffled reactor. Biotechnology Letters 2001, 23:1899-1901.
206. Levenspiel O. Chemical Reaction Engineering 1999, Wiley.
207. Loewe, H. and Hessel, V. (2006). New approaches to process intensification: microstructured reactors changing processing routes. Proceedings of the 2nd Process Intensification and Innovation Conference, Christchurch, New Zealand, 24-29 September.
208. Loupy A. Microwaves in Organic Synthesis 2002, Wiley-VCH.
209. Luo L., Tondeur D., Le Gall H., Corbel S. Constructal approach and multi-scale components. Applied Thermal Engineering 2007, 27:1708-1714.
210. Mackley M.R., Harrison S.T.L. A pulsatile flow bioreactor. Chem. Eng. Sci. 1992, 47:490-493.
211. Mackley M.R., Smith K.B., Wise N.P. The mixing and separation of particle suspensions using oscillatory flow in baffled tubes. Chem. Eng. Res. Des. 1993, 71(A6):649-656.
212. Mackley M.R., Stonestreet P. Heat transfer and associated energy dissipation for oscillatory flow in baffled tubes. Chem. Eng. Sci. 1995, 50:2211-2224.
213. Mason T.J., Cordemans E. ultrasonic intensification of chemical processing and related operations: a review. Chem. Eng. Res. Des. 1996, 74(A5):511-516. July.
214. Matsushima H., et al. Water electrolysis under microgravity: Part I experimental technique. Electrochimica Acta 2003, 48:4119.
215. Ni X., Bennett D.C., Symes K.C., Grey B.D. Inverse phase suspension polymerization of acrylamide in a batch oscillatory baffled reactor. J. Appl. Polym. Sci. 2000, 76:1669-1676.
216. Ni X., Cosgrove J.A., Arnott A.D., Greated C.A., Cumming R.H. On the measurement of strain rate in an oscillatory baffled column using particle image velocimetry. Chem. Eng. Sci. 2000, 55:3195-3208.
217. Ni X., Cosgrove J.A., Cumming R.H., Greated C.A., Murray K.R., Norman P. Experimental study of flocculation of bentonite and alcaligenes eutrophus in a batch oscillatory baffled flocculator. Trans IchemE. 2001, 79(Part A).
218. Ni X., Gaidhani H.K., McNeil B. Fermentation of pullulan using an oscillatory baffled fermenter. Chem. Eng. Res. Des. 2005, 83(A6):640-645.
219. Ni X., Gao S. Scale up correlation for mass transfer coefficients in pulsed baffled reactors. Chem. Eng. J. 1996, 63:157-166.
220. Ni X., Gao S., Pritchard D.W. A study of mass transfer in yeast in a pulsed baffled bioreactor. J.Biotechnol. Bioeng. 1995, 45:165-175.
221. Ni X., Zhang Y., Mustafa I. An investigation of droplet size and size distribution in methylmethacrylate suspensions in a batch oscillatory baffled reactor. Chem. Eng. Sci. 1998, 53:2903-2919.
222. Ni X., Zhang Y., Mustafa I. Correction of polymer particle size with droplet size in suspension polymerisation of methylmethacrylate in a batch oscillatory baffled reactor. Chem. Eng. Sci. 1999, 54:841-850.
223. Nusselt W. Die oberflachen kondensation des wasserdampfes. Z. ver. deut. ing. 1916, 60:541. and p. 569.
224. Perry W.L., Datye A.K., Prinja A.K., Brown L.F., Katz J.D. Microwave heating of endothermic catalytic reactions: reforming of methanol. AIChE Journal 2002, 48(4):820-831.
225. Pudjiono P.I., Tavare N.S., Garside J., Nigam K.D.P. Residence time distribution from a continuous couette-flow device. Chemical Engineering Journal and The Biochemical Engineering Journal 1992, 48(2):101-110.
226. Qi Z., Zhang R. Alkylation of benzene with ethylene in a packed reactive distillation column. Ind. Eng. Chem. Res. 2004, 43:4105-4111.
227. Reis N., Harvey A.P., Mackley M.R., Teixeira J.A., Vicente A.A. Fluid mechanics and design aspects of a novel oscillatory flow screening mesoreactor. Chem. Eng. Res. Des. 2005, 83:357-371.
228. Reis N., Vicente A.A., Teixeira J.A., Mackley M.R. Residence times and mixing of a novel continuous oscillatory flow screening reactor. Chem. Eng. Sci. 2004, 59(22-23):4967-4974.
229. Reis C.N., Goncalves M., Aguedo N., Gomes J.A., Teixeira, Vicente A.A. Application of a novel oscillatory flow micro-bioreactor to the production of gamma-decalactone in a two immiscible liquid phase medium. Biotech. Letters 2006, 28:485-490.
230. Ristic R.I., Chew C.M. Crystallization by oscillatory and conventional mixing at constant power density. AIChE Journal 2005, 51(5):1576-1579.
231. Sakairi M., Yamada M., Kifuchi T., Takahashi H. Development of three-electrode type micro-electrochemical reactor on anodised aluminium with photon rupture and electrochemistry. Electrochimica Acta 2007, 52:6268-6274.
232. Seris E.L.C., Abramowitz G., Johnston A.M., Haynes B.S. Scaleable, microstructured plant for steam reforming of methane. Chemical Engineering Journal 2008, 135(Supplement 1):S9-sS16.
233. Shu J., Lakshmanan V.I., Dodson C.E. Hydrodynamic study of a toroidal fluidised bed reactor. Chemical Engineering and Processing 2000, 39:499-506.
234. Sisoev G.M., Omar K., Matar O.K., Lawrence C.J. Gas absorption into a wavy film flowing over a spinning disc. Chem. Eng. Sci. 2005, 60(7):2051-2060.
235. Smith, K.B. (2000). The scale-up of oscillatory flow mixing. PhD Thesis, University of Cambridge, UK.
236. Stankiewicz A., Moulijn J.A. Process intensification: transforming chemical engineering. Chemical Engineering Progress 2000, 22-34. January.
237. Stanley A.E., Godbey S.E. The laser-induced nitrations of several hydrocarbons. Applied Spectroscopy 1989, 43(4):674-681.
238. Steinbach P.B., Manahan S.E., Larsen D.W. The chemical reduction of small inorganic gases in an electrothermal plasma reactor. Microchemical Journal 2003, 75:223-231.
239. Stephenson, P., et al. (2003). Patent WO 03099743. Asymmetric hydrogenation under supercritical conditions. Publication date 4 December.
240. Stevens, G.G. (1996). Suspension polymerisation in oscillatory flow. PhD Thesis, University of Cambridge, UK.
241. Stitt E.H. Alternative multiphase reactors for fine chemicals. A world beyond stirred tanks?. Chemical Engineering Journal 2002, 90:47-60.
242. Stonestreet P., Van der Veeken P.M.J. The effects of oscillatory flow and bulk flow components on residence time distribution in baffled tube reactors. Chem. Eng. Res. Des. 1999, 77(A8):671-684.
243. Ter Harmsel, J., Pissavini, S. and Caze, P. (2007). Mobile micro reactor for industrial production. Proceedings of the European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September.
244. Thompson L.H., Doraiswamy L.K. Sonochemistry: science and engineering. Ind. Eng. Chem. Res. 1999, 38:1215-1249.
245. Tonkovich A.Y., Perry S., Wang Y., Qiu D., LaPlante T., Rogers W.A. Microchannel process technology for compact methane steam reforming. Chemical Engineering Science 2004, 59:4819-4824.
246. Trent, D. and Tirtowidjojo, D. (2001). Commercial operation of a rotating packed bed (RPB) and other applications of RPB technology. Proceedings of the 4th International Conference on Process Intensification in the Chemical Industry, pp. 11-19, BHR Group.
247. Trusek-Holownia A. Production of protein hydrolysates in an enzymatic membrane reactor. Biochemical Engineering Journal 2008, 39(2):221-229.
248. Tuchlenski A., Beckmann A., Reusch D., Dussel R., Weidlich U., Janowsky R. Reactive distillation-industrial applications, process design and scale-up. Chem. Eng. Sci. 2001, 56:387-394.
249. Vardi A., Shapiro M. Laser catalysis with pulses. A Physical Review 1998, 58(2):1352-1360. August.
250. Vedantam S., Joshi J.B. Annular centrifugal contactors: a review. Chem. Eng. Res. Des. 2006, 84(A7):522-542.
251. Vicevic, M., Jachuck, R.J.J. and Scott, K. (2001). Process intensification for green chemistry: rearrangement of ?-pinene oxide using a catalysed spinning disc reactor. 4th International Conference on Process Intensification for the Chemical Industry, Brugge, Belgium, September 10.
252. Wasewar K.L., Pangarkar V.G., Heesink A.B.M., Versteeg G.F. Intensification of enzymatic conversion of glucose to lactic acid by reactive extraction. Chemical Engineering Science 2003, 58:3385-3393.
253. Weatherley L.R. Electrically enhanced mass transfer. Heat Recovery Systems and CHP 1993, 13(6):515-537.
254. Woods W.P. The hydrodynamics of thin films flowing over a rotating disc 1995, PhD Dissertation, Newcastle University, Newcastle upon Tyne, UK.
255. Xu N., Xing W., Xu N., Shi J. Application of turbulence promoters in ceramic membrane bioreactor used for municipal wastewater reclamation. Journal of Membrane Science 2002, 210:307-313.
256. Zanfir M., Gavriilidis A. Catalytic combustion assisted methane steam reforming in a catalytic plate reactor. Chemical Engineering Science 2003, 58:3947-3960.
257. Zeev, K.E. (2003). Method and apparatus for optically activating chemical reactions. Russian Patent RU2210022, published 8 October.
258. Zhang H., Zhuang J. Research, development and industrial application of heat pipe technology in China. Applied Thermal Engineering 2003, 23(9):1067-1083.
259. Zheng M., Skelton R.L., Mackley M.R. Biodiesel reaction screening using oscillatory flow mesoreactors. Process Safety and Environmental Protection 2007, 85(B5):365-371.
260. Zhu X., Campero R.J., Vigil R.D. Axial mass transport in liquid/liquid Taylor-Couette-Poiseuille flow. Chemical Engineering Science 2000, 55:5079-5087.
261. Al Taweel A.M., Yan J., Azizi F., Odebra D., Gomaa H.G. Using in-line static mixers to intensify gas-liquid mass transfer processes. Chemical Engineering Science 2005, 60:6378-6390.
262. de Weerd K. Intensification of gas-liquid reactions. NPT Procestechnologie 2001, (2):38-41. March-April.
263. Ferrouillat S., Tochon P., Garnier C., Peeerhossaini H. Intensification of heat transfer and mixing in multifunctional heat exchangers by artificially generated streamwise vorticity. Applied Thermal Engineering 2006, 26:1820-1829.
264. Green, A., Johnson, B., Westall, S., Bunegar, M. and Symonds, K. (2001). Combined chemical reactor/heat exchangers: validation and application in industrial processes. Proceedings of the 4th International Conference on Process Intensification in the Chemical Industry, pp. 215-225, BHR Group, Cranfield.
265. Hessel V., Lowe H., Schoenfeld F. Micromixers: a review on passive and active mixing principles. Chemical Engineering Science 2005, 60(8-9):2479-2501.
266. Wu J., Graham L.J., Noui-Mehidi N. Intensification of mixing. Journal of Chemical Engineering of Japan 2007, 40(11):890-895.
267. Anlauf H. Recent developments in centrifuge technology. Separation and Purification Technology 2007, 58:242-246.
268. Anon, (1992). Microwave/vacuum drying of cast ceramic ware. Energy Efficiency Office Best Practice Programme, New Practice Final Profile 40, September.
269. Basic A., Dudukovic M.P. Liquid holdup in rotating packed beds: examination of the film flow assumption. AIChE 1995, 41(2):301-316.
270. Belyaev A.A., et al. Membrane air separation for intensification of coal gasification process. Fuel Processing Technology 2003, 80:119-141.
271. Buchaly C., Kreis P., Gorak A. Hybrid separation processes: combination of reactive distillation with membrane separation. Chemical Engineering and Processing 2007, 26:790-799.
272. Burns J.R., Ramshaw C. Process intensification: visual study of liquid maldistribution in rotating packed beds. Chem. Eng. Sci. 1996, 51(8):1347.
273. Burns J.R., Jamil J.N., Ramshaw C. Process intensification: operating characteristics of rotating packed beds: determination of liquid hold-up for a high-voidage structured packing. Chem. Eng. Sci. 2000, 55:2401.
274. Byrd, G. (1986). European Patent No. 176287 (A).
275. Caputo G., Felici C., Tarquini P., Giaconia A., Sau S. Membrane distillation of HI/H2O and H2SO4/H2O mixtures for the sulphur-iodine thermochemical process. Int. J. Hydrogen Energy 2007, 32:4736-4743.
276. Coulson J.M., Richardson J.F. Chemical Engineering 1978, Vol. 2. Pergamon, Oxford. 3rd edn.
277. Day N. Why centrifuges play an important role in the production of sugar. Filtration and Separation 2004, 41(8):28-30. October.
278. Finn A.J. Enhancing gas processing with reflux heat exchangers. Chemical Engineering 1994, May.
279. George B.J., Pereira N., Al Massum M., Kolev A.D., Ashokkumar M. Sensitivity enhancement in membrane separation flow injection analysis by ultrasound. Ultrasonics Sonochemistry 2008, 15:151-156.
280. Hetherington, P., et al. (2001). Process intensification: continuous production of barium sulphate using a spinning cone precipitator. 4th International Conference on Process Intensification for the Chemical Industry. Bruges, Belgium. BHR Group Conf. Series, September 10th.
281. Hong W.-E., Ro J.-S. Millisecond crystallization of amorphous silicon films by Joule-heating induced crystallization using a conductive layer. Thin Solid Films 2007, 515:5357-5361.
282. Kaibel B. Distillation - dividing wall columns. Encyclopedia of Separation Science 2007, 1-9. Elsevier, Oxford.
283. Mallinson, R., Ramshaw, C. (1979). European Pat No 2568B.
284. Crystallisation 1972, Butterworths, London. 2nd Edn. J.W. Mullins (Ed.).
285. Oxley P., et al. Evaluation of spinning disc reactor technology for the manufacture of pharmaceuticals. IEC Research 2000, 39(7):2175.
286. Peel J., Howarth C.R., Ramshaw C. Process intensification: HiGee sea water deaeration. Trans. I. Chem. E. 1998, 76(Part A):585.
287. Ramshaw C. The opportunities for exploiting centrifugal fields. Heat Recovery Systems and CHP 1993, 13(6):493.
288. Ramshaw C., Thornton J.D. Droplet breakdown in a packed column Part I: the concept of critical droplet size. I. Chem. E. Symp. Ser. 1967, (26):73.
289. Rao R., Sun G.C. Microwave annealing enhances Al-induced lateral crystallization of amorphous silicon thin films. Journal of Crystal Growth 2004, 273(1-2):68-73. December 17.
290. Rijkens, H.C. (2000). Membrane developments for natural gas conditioning. Proceedings of the Symposium: Process Intensification: a challenge for the Process Industry, Rotterdam, October, 10.
291. Rijkens H., Sponselee J. Membrane developments for natural gas dehydration. NPT Procestechnologie 2001, (2):51-53. March-April.
292. Sherwood T.K., Shipley G.H., Holloway F.A.L. Flooding velocities in packed columns. Ind. Eng. Chem. 1938, 30:765.
293. Teplyakov V., et al. Intensification of gas phase catalytic processes in nano-channels of ceramic catalytic membranes. Desalination 2006, 199:161-163.
294. Wang, G.Q., Xu, Z.C., Yu, Y.L., Ji, J.B. (2007). Performance of a rotating zigzag bed - a new HiGee. Chemical Engineering and Processing, doi:10.1016/j.cep.2007.11.001, 2007.
295. Wolny, A., Kaniuk, R. (1995). Intensification of the evaporation process by electric field. Proceedings of the 1st International Conference on Science, Engineering and Technology of Intensive Processing, University of Nottingham, 18-20 September, pp. 79-82, University of Nottingham.
296. Anon High tech exchanger has it all on a plate. Offshore Engineer 1991, May.
297. Anon, (1998). EEBPP Good practice module: experience in the operation of compact heat exchangers. GPG 198, DETR. Available from 2007. http://www.thecarbontrust.co.uk.
298. Anon, (2004). Minutes of the 10th Meeting of the Process Intensification Network, Heriot-Watt University, Edinburgh, 3 June. See . http://www.pinetwork.org.
299. Anon, (2008). Industry outlook: black gold. (Ed.: P.J. Parmalee). Aviation Week and Space Technology, p. 390, January 28. See . http://www.aviationweek.com/awst.
300. Banister, J. and Rumbold, S. (2005). A compact gas-to-methanol process and its application to improved oil recovery. Heatric web site publication. See . http://www.heatric.com.
301. Betting M., Epsom H. Supersonic separator gains market acceptance. World Oil 2007, 197-200. April.
302. Brophy, J. (2004). Modular gas-to-liquids technology. Paper presented at 10th Process Intensification Network meeting, Heriot-Watt University, Edinburgh, 3 June. See . http://www.pinetwork.org.
303. Chen Jian-Feng, et al. HiGee Technology and Applications: Novel Technology for Chemical Reaction and Separation 2003, Chemical Industry Press Co., Chapter 5, ISBN 7-5025-3842-9/TQ.1541, (in Chinese).
304. Fowler, R. (1986). Intensified mass transfer with HiGee. Presentation to the Association Francaise Techniciens Petrole, 13 May.
305. Fowler, R. and Khan, A.S. (1987). VOC removal with a rotary air stripper. Session 181, Proceedings of the AIChE Annual Meeting, New York, 15-17 November.
306. Hall K.R. A new gas to liquids (GTL) or gas to ethylene (GTE) technology. Catalysis Today 2005, 106:243-246.
307. Knott T. PCHEs slice gas treatment costs. Offshore Engineer 1993, 14-16. October.
308. Mansfield, D., Poulter, L. and Kletz, T. (1996). Improving inherent safety. Health and Safety Executive Offshore Technology Report OTH 96 521, HSE Books.
309. Oswald, B. (1999). Process Intensification: an oil and gas perspective, 'More and Less'. Minutes of Inaugural Meeting of the Process Intensification Network, Newcastle University, April. See . http://www.pinetwork.org.
310. Petty C.A., Parks S.M. Flow structures within miniature hydrocyclones. Minerals Engineering 2004, 17:615-624.
311. Reay, D.A. (1999). Learning from experiences with compact heat exchangers. CADDET Analysis Series No. 25, CADDET, The Netherlands, June.
312. Terry, E. (2004). Safety and process intensification offshore. Minutes of the 10th Meeting of the Process Intensification Network, Heriot-Watt University, Edinburgh, 3 June. See and . http://www.galbraithconsulting.co.uk.
313. Tonkovich A.L., Jarosch K., Arora R., Silva L., Perry S., McDaniel J., Daly F., Litt R. Methanol production FPSO plant concept using multiple microchannel unit operations. Chemical Engineering Journal 2008, 135S:S2-sS8.
314. Van Eck, P. and Epsom, H.D. (2006). Supersonic gas conditioning - introduction of the low pressure drop Twister. Proceedings of the European Annual Meeting of the Gas Processors Association, Oslo, 20-22 September.
315. Waldie, B. (1995). Novel high intensity gas-liquid contactor. Proceedings of the 1st International Conference on Science, Engineering and Technology of Intensive Processing, Nottingham University, September.
316. Weissman J.G. Review of processes for downhole catalytic upgrading of heavy crude oil. Fuel Processing Technology 1997, 50:199-213.
317. Weissman J.G., Kessler R.V. Downhole heavy crude oil hydroprocessing. Applied Catalysis A: General 1996, 140:1-16.
318. Anon, (1991). US Patent 5125793. Turbine blade cooling with endothermic fuel. Assigned to the USA as represented by the Secretary of the Air Force, filed 8 July.
319. Anon, (1992). US Patent 5313790. Endothermic fluid based thermal management system. Assigned to Allied-Signals Inc., Morris County, NJ, filed 17 December.
320. Anon, (1993). US Patent 5449568. Indirect-fired gas turbine bottomed with fuel cell. Assigned to US Department of Energy, filed 28 October.
321. Anon, (1997a). US Patent 5640840. Recuperative steam cooled gas turbine method and apparatus. Assigned to Westinghouse Electric Corporation, Pittsburgh, PA, 24 June.
322. Anon, (1997b). US Patent 5695319. Gas turbine. Assigned to Hitachi, Japan, issued 9 December.
323. Anon, (1997c). US Patent 5590518. Hydrogen-rich fuel, closed-loop cooled, and reheat enhanced gas turbine power plant. Assigned to California Energy Commission, Sacramento, CA, issued 7 January.
324. Anon, (1989). European Patent Registration 08901102. Turbine a Gaz Isotherme à Oxidation Partielle. Assigned to J. Ribesse, Jarix Company, 11 October.
325. Anon, (2002). Combined heat, power and chemicals: the feasibility of gas turbine reactors. Report by David Reay and Associates in association with the partners. Agreement E/CA/00340/00/00/4576, ETSU. Final report June.
326. Boodhoo, K.V.K. et al. (1995). Process intensification: spinning disc polymeriser for the manufacture of polystyrene. 1st International Conference on Process Intensification in the Chemical Industry. BHR Group Conf. Series. Pub. No. 18.
327. Boodhoo, K.V. K., Jachuck, R.J.J. and Ramshaw, C. A. (1997). Spinning disc reactor for the intensification of styrene polymerisation. 2nd International Conference on Process Intensification in Practice. BHR Group Conf. Series. Pub. No. 28.
328. Boodhoo K.V.K., Jachuck R.J.J. The spinning disc reactor for condensation polymerisation. Green Chemistry Journal 2000, 2:235-244.
329. Boodhoo K.V.K., Jachuck R.J.J. Process intensification: spinning disc reactor for styrene polymerisation. Applied Thermal Engineering 2000, 20(12):1127-1146.
330. Calvar N., Gonzalez B., Dominguez A. Esterification of acetic acid with ethanol: reaction kinetics and operation in a packed-bed reactive distillation column. Chemical Engineering and Processing 2007, 46:1317-1323.
331. Cao E., Gavriilidis A. Oxidative dehydrogenation of methanol in a microstructured reactor. Catalysis Today 2005, 110:154-163.
332. Chen G., Li S., Jiao F., Yuan Q. Catalytic dehydration of bioethanol to ethylene over TiO2/?-Al2O3 catalysts in microchannel reactors. Catalysis Today 2007, 125:111-119.
333. Cornelissen R., Tober E., Kok J., van de Meer T. Generation of synthesis gas by partial oxidation of natural gas in a gas turbine. Energy 2006, 31:3199-3207.
334. Enache D.I., Thiam W., Dumas D., Ellwood S., Hutchings G.J., Taylor S.H., Hawker S., Stitt E.H. Intensification of the solvent-free catalytic hydroformylation of cyclododecatriene: comparison of a stirred batch reactor and a heat-exchanger reactor. Catalysis Today 2007, 128:18-25.
335. Gogate P.R. Cavitational reactors for process intensification of chemical processing applications: a critical review. Chemical Engineering Processing 2007, doi:10.1016/j.cep.2007.09.014.
336. Hall S., Stoker A. APIs: new plants for new products. Pharmaceutical Engineering 2003, May-June.
337. Harmsen G.J. Reactive distillation: The front-runner of industrial process intensification. A full review of commercial applications, research, scale-up, design and operation. Chemical Engineering and Processing 2007, 46:774-780.
338. Hu J., Wang Y., Cao C., Elliott D.C., Stevens D.J., White J.F. Conversion of biomass-derived syngas to alcohols and C2 oxygenates using supported Rh catalysts in a microchannel reactor. Catalysis Today 2007, 120:90-95.
339. Hugill J.A., Tillemans F.W.A., Dijkstra J.W., Spoelstra S. Feasibility study on the cogeneration of ethylene and electricity through oxidative coupling of methane. Applied Thermal Engineering 2005, 25:1259-1571.
340. Jin, H., Subramaniam, B. and Fang, J. (2006). Process intensification by employing CO2-expanded liquids (CXLs) as alternative solvents: a case study of homogeneous catalytic hydroformylation of higher olefins. Proceedings of the 2nd Conference on Process Intensification and Innovation, Christchrch, New Zealand, September 24-29.
341. Kirschneck, D. (2007). Micro-reactors on production scale: a technical and economical status report for pharmaceutical applications. Proceedings of the European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September.
342. Korobitsyn, M.A. et al. (1998). Analysis of a gas turbine with partial oxidation. Proceedings of the 43rd ASME International Gas Turbine and Aeroengine Congress, Sweden, June. Paper ASME 98-GT-33.
343. Ladero, M., de Gracia, M., Alvarero, P., Trujillo, F. and Garcia-Ochoa, F. (2007). Process intensification in the esterification of rosin and glycerol. Proceedings of the European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September.
344. Loewe, H. and Hessel, V. (2006). New approaches to process intensification - microstructured reactors changing processing routes. Proceedings of the 2nd Process Intensification and Innovation Conference, Christchurch, New Zealand, September 24-29.
345. Lyubovsky M., Walsh D. Reforming system for cogeneration of hydrogen and mechanical work. Journal of Power Sources 2006, 157:430-437.
346. McCarthy, E.D., Dunk, W.A. and Boodhoo, K.V.K. (2006). Tailoring particle properties through precipitation in a narrow channel reactor. Proceedings of the 2nd Process Intensification and Innovation Conference, Christchurch, New Zealand, September 24-29.
347. Neelis M., Patel M., Bach P., Blok K. Analysis of energy use and carbon losses in the chemical industry. Applied Energy 2007, 84:853-862.
348. Novakovic K., Boodhoo K.V.K., Morris A.J. Kinetics of styrene free radical polymerisation in the spinning disc reactor. Chem. Eng. J. 2008, 135(1-2):78-82. January.
349. Oxley P., et al. Evaluation of spinning disc reactor technology for the manufacture of pharmaceuticals. IEC Res. 2000, 39(7):2175-2182.
350. Patience G.S., Cenni R. Formaldehyde process intensification through gas heat capacity. Chemical Engineering Science 2007, 62:5609-5612.
351. Pedernera M.N., Pina J., Borio D.O., Bucala V. Use of a heterogeneous two-dimensional model to improve the primary steam reformer performance. Chemical Engineering Journal 2003, 94:29-40.
352. Perez-Ramirez J., Vigeland B. Lanthanum ferrite membranes in ammonia oxidation. Opportunities for 'pocket-sized' nitric acid plants. Catalysis Today, 2005, 105:436-442.
353. Pfeuffer, B., Petre, D., Kunz, U., Hoffmann, U., Turek, T. and Holl, D. (2007). Production of sec-butyl alcohol by olefin hydration - a candidate for process intensification? Proceedings of the European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September.
354. Reay, D.A. and Ramshaw, C. (1992). An investigation into catalytic combustion. Contractors' report, submitted to ETSU, Harwell, August.
355. Reay, D.A. and Ramshaw, C. (1998). Gas turbine reactor study. Contract report to BP Exploration, April.
356. Schildhauer T.J., Kapteijn F., Moulijn J.A. Reactive stripping in pilot scale monolith reactors-application to esterification. Chemical Engineering and Processing 2005, 44:695-699.
357. Tai C.Y., Tai C.T., Liu H.S. Synthesis of submicron barium carbonate using a high-gravity technique. Chemical Engineering Science 2006, 61:7479-7486.
358. Vicevic, M. et al. (2001). Process intensification for green chemistry: rearrangement of alpha-pinene oxide using a catalysed spinning disc reactor. 4th International Conference on Process Intensification for the Chemical Industry. Bruges, Belgium BHR Group Conf. Series, 10 September.
359. Vicevic, M., Novakovic, K., Boodhoo, K.V.K. and Morris, A.J. (2006). Kinetics of styrene free radical polymerisation in the spinning disc reactor. Proceedings of the 2nd Conference on Process Intensification and Innovation, Christchurch, New Zealand, September 24-29.
360. Vicevic M., Boodhoo K.V.K., Scott K. Catalytic isomerisation of ?-pinene oxide to campholenic aldehyde using silica-supported zinc triflate catalysts. II. Performance of immobilised catalysts in a continuous spinning disc reactor. Chemical Engineering Journal 2007, 133:43-57.
361. Vicevic, M. et al. Kinetics of styrene free radical polymerisation in the spinning disc reactor. Chem. Eng. J. (In press).
362. Wang, M., Ramshaw, C. and Yeung, H. (2007). Feasibility study of a turbo-cracker. Presentation at 15th PIN meeting, Cranfield University, 21 November. See . http://www.pinetwork.org.
363. Weatherley L.R. Electrically enhanced mass transfer. Heat Recovery Systems and CHP 1993, 13(6):515-537.
364. Wernersson, M. (2007). Small scale continuous reactors in process development. Proceedings of the European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September.
365. Anon, (a). http://www.cse.clrc.ac.uk.
366. Anon, (2000). Beyond the battery. Industry and European Market, Vol. 10, No. 9, 2000.
367. Anon, (2007). http://www.nec.co.jp/press/en/0309/1701.html.
368. Chen G., Li S., Li H., Jiao F., Yuan Q. Methanol oxidation reforming over a ZnO-Cr2O3/CeO2-ZrO2/Al2O3 catalyst in a monolithic reactor. Catalysis Today 2007, 125:97-102.
369. Cheng H-H., Tan C-S. Reduction of CO2 concentration in a zinc/air battery by absorption in a rotating packed bed. Journal of Power Sources 2006, 162:1431-1436.
370. Cherbanski, R. and Molga, E. (2007). Intensification of desorption processes by use of microwaves - an overview of possible applications and industrial perspectives. Proceedings of the European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September.
371. Critoph R.E., Metcalf S.J. Specific cooling power intensification limits in ammonia-carbon adsorption refrigeration systems. Applied Thermal Engineering 2004, 24:661-678.
372. Dutour S., Mazet N., Joly J.L., Platel V. Modeling of heat and mass transfer coupling with gas-solid reaction in a sorption heat pump cooled by a two-phase closed thermosyphon. Chemical Engineering Science 2005, 60:4093-4104.
373. Figus C., et al. Capillary fluid loop developments in Astrium. Applied Thermal Engineering 2003, 23:1085-1098.
374. Garimella S.V. Advances in mesoscale thermal management technologies for microelectronics. Microelectronics Journal 2006, 37:1165-1185.
375. Gilchrist K., Lorton R., Green R.J. Process intensification applied to an aqueous LiBr rotating absorption chiller with dry heat rejection. Applied Thermal Engineering 2002, 22:847-854.
376. Gordon J.M., Ng K.C., Chua H.T., Chakraborty A. The electro-adsorption chiller: a miniaturised cooling cycle with applications to micro-electronics. Int. J. Refrigeration, 2002, 25:1025-1033.
377. Microengineering Aerospace Systems 1999, The Aerospace Press/AIAA, USA. H. Helvajian (Ed.).
378. Heppner J.D., Walther D.C., Pisano A.P. The design of ARCTIC: a rotary compressor thermally insulated micro-cooler. Sensors and Actuators A 2007, 134:47-56.
379. Hu X., Tang D. Experimental investigation on flow and thermal characteristics of a micro phase-change cooling system with a microgroove evaporator. Int. J. Thermal Sciences 2007, 36:1163-1171.
380. Izquierdo, M., Lizarte, R., Marcos, J.D., Gutierrez, G., (2007). Air conditioning using an air-cooled single effect lithium bromide absorption chiller: results of a trial conducted in Madrid in August 2005, Applied Thermal Engineering, doi:10.1016/j.applthermaleng.2007.11.013.
381. Kolb, G., Men, Y., Schurer, J., Tiemann, D., Wichert, M., Zapf, R. and Hessel, V. (2007). Mass-production of miniaturised microstructured fuel processors for distributed energy generation. Proc. European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September.
382. Kundu A., Jang J.H., Gil J.H., Jung C.R., Lee H.R., Kim S.-H., Ku B., Oh Y.S. Review paper. Micro-fuel cells: current development and applications. Journal of Power Sources 2007, 170:67-78.
383. Li T.X., Wang R.Z., Wang L.W., Lu Z.S., Chen C.J. Performance study of a high efficient multifunctional heat pipe type adsorption ice making system with novel mass and heat recovery processes. Int. J. Thermal Sciences 2007, 46:1267-1274.
384. Lin L., et al. High performance miniature heat pipe. Int. J. Heat and Mass Transfer 2002, 45:3131-3142.
385. Maydanik Yu.F. Loop heat pipes. Review article. Applied Thermal Engineering, 2005, 25(5-6):635-657. April.
386. McGlen, R., Jachuck, R. and Lin, S. (2003). Integrated thermal management techniques for high power electronic devices. Proc. 8th UK National Heat Transfer Conf., Oxford University.
387. Mehendale, S.S. et al. (1999). Heat exchangers at micro- and meso-scales. In: Compact Heat Exchangers and Enhancement Technology for the Process Industries. Proc. Int. Conf., Banff, Canada, pp. 55-74, July 18-23.
388. Moon S.H., et al. Improving thermal performance of miniature heat pipe for notebook PC cooling. Microelectronics Reliability 2004, 44:315-321.
389. Munkejord S.T., Maehlum H.S., Zakeri G.R., Neksa P., Pettersen J. Micro technology in heat pumping systems. Int. J. Refrigeration 2002, 25:471-478.
390. Ramshaw, C. Editorial. PIN News: The Newsletter of the Process Intensification Network, Issue 12, March 2005. See . http://www.pinetwork.org.
391. Reay, D.A. (2005). Microfluidics overview. Proc. Seminar on Microfluidics, organised by TUV-NEL, East Midlands Airport, 13 April.
392. Reay, D.A., Hesselgreaves, J.E. and Sizmann, R. (1998). Novel compact heat exchanger/absorber technology for cost-effective absorption cycle machines. Exploratory Award Contract JOE3-CT97-1016, Final report, Commission of the European Communities, March.
393. Reay, D.A. and Kew, P.A. (1999). The contribution of compact heat exchangers to reducing capital cost. IMechE Seminar on Recent Developments in Refrigeration and Heat Pump Technologies, London, 20 April 1999. IMechE Seminar Publication, 1999-10, pp. 37-46.
394. Reay D.A., Kew P.A. Heat Pipes 2006, Butterworth-Heinemann/Elsevier, Oxford. 5th edn.
395. Ribaud Y. La micro turbine: L'example du MIT. Mec. Ind. 2001, 2:411-420. (in French).
396. Swanson T.D., Birur G.C. NASA thermal control technologies for robotic spacecraft. Applied Thermal Engineering 2003, 23:1055-1065.
397. Waitz I.A., Gauba G., Tzeng Y-S. Combustors for micro-gas turbine engines. ASME J. Fluids Engineering 1998, 120:109-117. March.
398. Yu H., Chen H., Pan M., Tang Y., Zeng K., Peng F., Wang H. Effect of the metal foam materials on the performance of methanol-steam micro-reformer for fuel cells. Applied Catalysis A: General 2007, 327:106-113.
399. Zajtchuk R. New technologies in medicine: biotechnology and nanotechnology: a review. Disease-a-Month 1999, 45(11):453-495. November.
400. Anon, (1991). Testing of printed circuit heat exchangers. Future Practice R&D Profile 12, Energy Efficiency Best Practice Programme. Available from The Carbon Trust (UK), . http://www.thecarbontrust.co.uk.
401. Anon, (1993). Investigation into the fouling and scaling of a printed circuit heat exchanger. Future Practice R&D Profile 39, Energy Efficiency Best Practice Programme. Available from The Carbon Trust (UK), . http://www.thecarbontrust.co.uk.
402. Anon, (1998). Experience in the operation of compact heat exchangers. Good Practice Guide 198, Energy Efficiency Best Practice Programme. Available from the Carbon Trust, . http://www.thecarbontrust.co.uk.
403. Anon, (2000b). Minutes of the 3rd PIN meeting, UMIST, 27 April. http://www.pinetwork.org.
404. Anon, (2000a). Procesintensificatie: een uitdaging voor de procesindustrie, Novem, Rotterdam, 10 October, (principally in English).
405. Bakker R.A. Process intensification in industrial practice: methodology and application. Re-engineering the Chemical Processing Plant - Process Intensification 2004, Chapter 12, Marcel Dekker, New York. A. Stankiewicz, J.A. Moulijn (Eds.).
406. Brown M., Judd R., Siddle A. Compact reformer for hydrogen production. Advantica product information 2004, Loughborough, Leicestershire.
407. Buxbaum R. Membrane reactors, fundamental and commercial advantages, e.g. for methanol reforming. Canadian AICHE Membrane Separations Meeting 1997, Calgary, Alberta.
408. Capel R., de Waard W., van den Berg H. Process intensification: a result of systematic design. Npt procestechnologie 2001, (2):26-27. March-April.
409. Efthimeros G.A., Tsahalis D.T. Intensified energy-saving technologies developed in EU-funded research - a review. Applied Thermal Engineering 2000, 20:1607-1613.
410. Eigenberger G., Kolios G., Nieken U. Thermal pattern formation and process intensification in chemical reaction engineering. Chemical Engineering Science 2007, 62:4825-4841.
411. Etchells J. Prevention and control of exothermic runaway: an HSE update. Loss Prevention Bulletin 2001, 57:4-8. February.
412. Kalitventzeff B., Marechal F. Optimal insertion of energy saving technologies in industrial processes: a web-based tool helps in developments and co-ordination of a European R&D project. Applied Thermal Engineering 2000, 20:1347-1364.
413. Kolehmainen E., Rong B.-G., Turunen I. Methodology for process intensification applied to the scale-up of microreactors 2007, European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September.
414. Kooijman C., Vos H.J. Liquid phase hydrogenation: An energy saving alternative. Procesintensificatie een uitdaging voor de procesindustrie 2000, Novem, Rotterdam, 10 October, (in English).
415. Kothare M.V. Dynamics and control of integrated microchemical systems with application to micro-scale fuel processing. Computers and Chemical Engineering 2006, 30:1725-1734.
416. Moulijn, J.A., Makkee, M., and van Diepen, A.E., (2003). Process Technology, Chapter 5: Synthesis Gas. Delft University Applied Sciences, Reactor and Catalysis Engineering.
417. Moulijn J.A., Stankiewicz A., Grievink J., Gorak A. Process intensification and process systems engineering: a friendly symbiosis. Computers and Chemical Engineering 2008, 32:3-11.
418. Myers, D.B., Ariff, G.D., James, B.D., Lettow, J.S., Thomas, C.E. and Kuhn, R.C. (2002). Cost and performance comparisons of stations hydrogen fuelling appliances. Directed Technologies Inc - prepared for the Hydrogen Program Office.
419. Reay, D.A. (2006). Process Intensification, FLAME (Flexible Learning Advanced Masters in Energy). Course Notes, MSc in Energy, Heriot Watt University.
420. Reynolds, I. (2002). Laboratory protocol of process intensification. Proceedings of the 8th PIN Meeting, Cranfield University, 14 November. Powerpoint talk available on . http://www.pinetwork.org.
421. Turunen, I., Haario, H. and Piironen, M. (1999). Control system of an intensified gas-liquid reactor. Proceedings of the 3rd International Conference on Process Intensification, BHR Group.
422. Tham, M. (1999). Presentation on control and Process Intensification. Proceedings of the 2nd PIN Meeting, DTI Conference Centre, London, 16 November, see . http://www.pinetwork.org.
423. Van den Berg H. Process systems engineering, an effective tool for Process Intensification?. Npt procestechnologie 2001, 2:23-25. March-April.
424. Web 1. (2007). Web site of the project: boiling and condensation in microchannels. http://www.microchannels.org.
425. Anon. A Roadmap for the Twentyfirst Century. Institution of Chemical Engineers, May, 2007.
426. Stankiewicz A., Moulijn J.A. Re-engineering the Chemical Processing Plant: Process Intensification 2004, Marcel Dekker, New York.