Transient liquid penetration of early-injection diesel sprays

SAE Technical Papers

Volumn , Issue , 2009, Pages 785-804

  Pickett, Lyle M ^a   Kook, Sanghoon ^a   Williams, Timothy C ^a  

^a SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION; CYLINDERS (SHAPES); DIESEL ENGINES; DISTILLATION; FUELS; ORIFICES; SPRAY NOZZLES; TEMPERATURE;

BOILING-POINT TEMPERATURE; CRANK ANGLE DEGREES; HIGH INJECTION PRESSURES; INJECTION DURATIONS; INJECTOR PARAMETERS; LOW AMBIENT TEMPERATURES; LOW INJECTION PRESSURE; LOW TEMPERATURE COMBUSTION;

LIQUIDS;

EID: 85072351417     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2009-01-0839     Document Type: Conference Paper

References (35)

1. Zhao F., Asmus T.N., Assanis D., Najt P.M., Dec J.E., Eng J.A., Homogeneous Charge Compression Ignition (HCCI) Engines-Key Research and Development Issues, Society of Automotive Engineers, Warrendale, PA. SAE, 2003.
2. Kanda T., Hakozaki T., Uchimoto T., Hatano J., Kitayama N., and, Sono H., "PCCI Operation with Early Injection of Conventional Diesel Fuel," SAE Paper 2005-01-0378, SAE Transactions, 114 (3): 584-593, 2005.
3. Klingbeil A.E., Juneja H., Ra Y., and, Reitz R. D., "Premixed Diesel Combustion Analysis in a Heavy-Duty Diesel Engine," SAE Paper 2003-01-0341, SAE Transactions, 112, 2003.
4. Musculus M.P.B., "Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine," SAE Paper 2006-01-0079, SAE Transactions, 115 (3): 83-110, 2006.
5. Hardy W.L., and, Reitz R.D., "A Study of the Effect of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion," SAE Paper 2006-01-0026, 2006.
6. Kook S., Bae C, Miles P.C., Choi D., and, Pickett L.M., "The Influence of Charge Dilution and Injection Timing on Low-Temperature Diesel Combustion and Emissions," SAE Paper 2005-01-3837, SAE Transactions, 114 (4): 1575-1595, 2006.
7. Kook S., Bae C, Miles P.C., Choi D., Bergin M., and, Reitz R.D., "The Effect of Swirl Ratio and Fuel Injection Parameters on CO Emission and Fuel Conversion Efficiency for High-Dilution, Low-Temperature Combustion in an Automotive Diesel Engine," SAE Paper 2006-01-0197, 2006, SAE Transactions, 115 (3): 111-132, 2007
8. Hotta Y., Inayoshi M., Nakakita K., Fujiwara K., and, Sakata I., "Achieving Lower Exhaust Emissions and Better Performance in an HSDI Diesel Engine With Multiple Injection," SAE Paper 2005-01-0928, SAE Transactions, 114 (3), 2005.
9. Opat R., Ra Y., Gonzalez M.A., Krieger R., Reitz R.D., Foster D.E., Durret R.P., and, Siewert R.M., "Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light-Duty Diesel Engine," SAE Paper 2007-01-0193, 2007.
10. Mueller C.J., Martin G.C., Briggs T.E., and, Duffy K.P., "An Experimental Investigation of in-Cylinder Processes Under Dual-Injection Conditions in a Dl Diesel Engine," SAE Paper 2004-01-1843, 2004.
11. Minato A., Tanaka T., and, Nishimura T., "Investigation of Premixed Lean Diesel Combustion with Ultra High Pressure Injection," SAE Paper 2005-01-0914, SAE Transactions, 114 (3): 756-764, 2005.
12. Walter B., and, Gatellier B., "Development of the High Power NADI Concept Using Dual Mode Diesel Combustion to Achieve Zero NOx and Particulate Emissions," SAE Paper 2002-01-1744, SAE Transactions, 111 (4) 779-787, 2002.
13. Lechner G.A., Jacobs T.J., Chryssakis C.A., Assanis D., and, Siewert R.M., "Evaluation of a Narrow Spray Cone Angle, Advanced Injection Timing Strategy to Achieve Partially Premixed Compression Ignition Combustion in a Diesel Engine," SAE Paper 2005-01-0167, 2005.
14. Siewert R.M., "Spray Angle and Rail Pressure Study for Low NOx Diesel Combustion," SAE Paper 2007-01-0122, 2007.
15. Kashdan J., Mendez S., and, Bruneaux G., "On the Origin of Unburned Hydrocarbon Emissions In a Wall Guided, Low NOx Diesel Combustion System", SAE Paper 2007-01-1836, 2007.
16. Fang T., Coverdill R.E., Lee C.F., and, White R. A., "Smokeless Combustion Within a Small-Bore HSDI Diesel Engine Using a Narrow Angle Injector," SAE Paper 2007-01-0203, 2007.
17. Martin G.C., Mueller C.J., Milam D., Radovanovic M., and, Gehrke C, "Early Direct-Injection, Low-Temperature Combustion of Diesel Fuel in an Optical Engine Utilizing a 15-Hole, Dual-Row, Narrow-lncluded-Angle Nozzle," SAE Paper 2008-01-2400, 2008.
18. Yokota H., Kudo Y., Nakajima H., Kakegawa T., and, Suzuki T., "A New Concept for Low Emission Diesel Combustion," SAE Paper 970891, 1997.
19. Cursente V., Pacaud P., Mendez S., Knop P., and, de Francqueville L., "System Approach for Compliance With Full Load Targets on a Wall Guided Diesel Combustion System," SAE Paper 2008-01-0840, 2008.
20. Kalghatgi G.T., Risberg P., and, Angstrom H.-E., "Advantages of Fuels With High Resistance to Autoignition in Late-Injection, Low-Temperature, Compression Ignition Combustion," SAE Paper 2006-01-3385, 2006.
21. Bessonette P.W., Schleyer C.H., Duffy K.P., Hardy W.L., and, Liechty M.P., "Effects of Fuel Property Changes on Heavy-Duty HCCI Combustion," SAE Paper 2007-01-0191, 2007.
22. Siebers D.L., "Liquid-Phase Fuel Penetration in Diesel Sprays," SAE Paper 980809, 1998.
23. Siebers D.L., "Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization." SAE Paper 1999-01-0528, 1999.
24. Espey C., and, Dec J.E., "The Effect of TDC Temperature and Density on the Liquid-Phase Fuel Penetration in a D.I. Diesel Engine," SAE Paper 952456, SAE Transactions, 104 (4): 1400-1416, 1995.
25. Alfuso S., Allocca L., Auriemma M., Caputo G., Corcione F.E., Montanaro A., and, Valentino G., "Analysis of a High Pressure Diesel Spray at High Pressure and Temperature Environment Conditions," SAE Paper 2005-01-1239, 2005.
26. Desantes J.M., Pastor J.V., Payri R., and, Pastor J.M., "Experimental Characterization of Internal Nozzle Flow and Diesel Spray Behavior. Part II: Evaporative Conditions," Atomization and Sprays, 15: 517-543, 2005. (Pubitemid 41366852)
27. Naber J.D., and, Siebers D.L., "Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays," SAE Paper 960034, SAE Transactions, 105 (3): 82-111, 1996.
28. Engine Combustion Network experimental data archive, http://www.ca. sandia.gov/ECN/.
29. Siebers D., Higgins B., and, Pickett L.M., "Flame Lift-Off on Direct-Injection Diesel Fuel Jets: Oxygen Concentration Effects," SAE Paper 2002-01-0890, SAE Transactions, 111 (3): 1490-1509, 2002.
30. Kook S., Pickett L.M., Musculus M.P.B., and, Gemlich R.K., "Influence of Diesel Injection Parameters on End-of-lnjection Liquid Length Recession", SAE Paper 2009-01-1356, 2009.
31. Settles G. S., Schlieren and Shadowgraph Techniques, Springer-Verlag, 2001.
32. Pickett L.M., Kook S., and, Williams T.C., "Visualization of Diesel Spray Penetration, Cool-Flame, Ignition, High-Temperature Combustion, and Soot Formation Using High-Speed Imaging," SAE Paper 2009-01-0658, 2009.
33. Musculus M.P.B., and, Kattke K., "Entrainment Waves in Diesel Jets," SAE Paper 2009-01-1355, 2009.
34. Anders J.W., Magi V., and, Abraham J., "A Computational Investigation of the Interaction of Pulses in Two-Pulse Jets," Num. Heat Tran., Part A: Applications, 54 (11): 999-1021, 2008.
35. Musculus M.P.B., Lachaux T., Pickett L.M., and, Idicheria C.A., "End-of-lnjection Over-Mixing and Unburned Hydrocarbon Emissions in Low-Temperature-Combustion Diesel Engines," SAE Paper 2007-01-0907, SAE Transactions, 116, 2007.