Three-Dimensional Accuracy of Digital Impression versus Conventional Method: Effect of Implant Angulation and Connection Type

International Journal of Dentistry

Volumn 2018, Issue , 2018, Pages

  Alikhasi, Marzieh ^a   Siadat, Hakime ^a   Nasirpour, Alireza ^b   Hasanzade, Mahya ^a  

^a TEHRAN UNIVERSITY OF MEDICAL SCIENCES   (Iran)

^b TEHRAN UNIVERSITY OF MEDICAL SCIENCES   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85049173015     PISSN: 16878728     EISSN: 16878736     Source Type: Journal    
DOI: 10.1155/2018/3761750     Document Type: Article

References (36)

1. A. G. Wee, S. A. Aquilino, and R. L. Schneider, "Strategies to achieve fit in implant prosthodontics: a review of the literature," International Journal of Prosthodontics, vol. 12, no. 2, pp. 167-178, 1999.
2. M. Karl, W. Winter, T. D. Taylor, and S. M. Heckmann, "In vitro study on passive fit in implant-supported 5-unit fixed partial dentures," International Journal of Oral and Maxillofacial Implants, vol. 19, no. 1, pp. 30-37, 2004.
3. L. E. E. Al-Turki, J. Chai, E. P. Lautenschlager, and M. C. Hutten, "Changes in prosthetic screw stability because of misfit of implant-supported prostheses," International Journal of Prosthodontics, vol. 15, no. 1, 2002.
4. T. Jemt and K. Book, "Prosthesis misfit and marginal bone loss in edentulous implant patients," International Journal of Oral and Maxillofacial Implants, vol. 11, no. 5, pp. 620-625, 1996.
5. A. Ender and A. Mehl, "Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision," Journal of Prosthetic Dentistry, vol. 109, no. 2, pp. 121-128, 2013.
6. M. E. Brosky, I. J. Pesun, P. D. Lowder, R. DeLong, and J. S. Hodges, "Laser digitization of casts to determine the effect of tray selection and cast formation technique on accuracy," Journal of Prosthetic Dentistry, vol. 87, no. 2, pp. 204-209, 2002.
7. B. Wöstmann, P. Rehmann, and M. Balkenhol, "Influence of impression technique and material on the accuracy of multiple implant impressions," International Journal of Prosthodontics, vol. 21, no. 4, pp. 299-301, 2008.
8. P. Papaspyridakos, C.-J. Chen, G. O. Gallucci, A. Doukoudakis, H.-P. Weber, and V. Chronopoulos, "Accuracy of implant impressions for partially and completely edentulous patients: a systematic review," International Journal of Oral and Maxillofacial Implants, vol. 29, no. 4, pp. 836-845, 2014.
9. K. Al-Abdullah, R. Zandparsa, M. Finkelman, and H. Hirayama, "An in vitro comparison of the accuracy of implant impressions with coded healing abutments and different implant angulations," Journal of Prosthetic Dentistry, vol. 110, no. 2, pp. 90-100, 2013.
10. V. A. Chia, R. J. Esguerra, K. H. Teoh, J. W. Teo, K. M. Wong, and T. B. Tan, "In vitro three-dimensional accuracy of digital implant impressions: the effect of implant angulation," International Journal of Oral and Maxillofacial Implants, vol. 32, no. 2, pp. 313-321, 2017.
11. B. Giménez, M. Özcan, F. Martínez-Rus, and G. Pradíes, "Accuracy of a digital impression system based on active wavefront sampling technology for implants considering operator experience, implant angulation, and depth," Clinical Implant Dentistry and Related Research, vol. 17, no. S1, pp. e54-e64, 2015.
12. P. Papaspyridakos, H. Hirayama, C. J. Chen, C. H. Ho, V. Chronopoulos, and H. P. Weber, "Full-arch implant fixed prostheses: a comparative study on the effect of connection type and impression technique on accuracy of fit," Clinical Oral Implants Research, vol. 27, no. 9, pp. 1099-1105, 2016.
13. M. Alikhasi, H. Siadat, and S. Rahimian, "The effect of implant angulation on the transfer accuracy of external-connection implants," Clinical Implant Dentistry and Related Research, vol. 17, no. 4, pp. 822-829, 2015.
14. E. Beyabanaki, A. R. Shamshiri, M. Alikhasi, and A. Monzavi, "Effect of splinting on dimensional accuracy of impressions made of implants with different subgingival alignments," Journal of Prosthodontics, vol. 26, no. 1, pp. 48-55, 2015.
15. H. Lee, J. S. So, J. Hochstedler, and C. Ercoli, "The accuracy of implant impressions: a systematic review," Journal of Prosthetic Dentistry, vol. 100, no. 4, pp. 285-291, 2008.
16. S. Amin, H. P. Weber, M. Finkelman, K. El Rafie, Y. Kudara, and P. Papaspyridakos, "Digital vs. conventional full-arch implant impressions: a comparative study," Clinical Oral Implants Research, vol. 28, no. 11, pp. 1360-1367, 2016.
17. K. Basaki, H. Alkumru, G. De Souza, and Y. Finer, "Accuracy of digital vs. conventional implant impression approach: a three-dimensional comparative in vitro analysis," International Journal of Oral and Maxillofacial Implants, vol. 32, no. 4, pp. 792-799, 2017.
18. M. Stimmelmayr, J.-F. Güth, K. Erdelt, A. Happe, M. Schlee, and F. Beuer, "Clinical study evaluating the discrepancy of two different impression techniques of four implants in an edentulous jaw," Clinical Oral Investigations, vol. 17, no. 8, pp. 1929-1935, 2013.
19. F. Martínez-Rus, C. García, A. Santamaría, M. Özcan, and G. Pradíes, "Accuracy of definitive casts using 4 implant-level impression techniques in a scenario of multi-implant system with different implant angulations and subgingival alignment levels," Implant Dentistry, vol. 22, no. 3, pp. 268-276, 2013.
20. F. A. Al Quran, B. A. Rashdan, A. A. Abu Zomar, and S. Weiner, "Passive fit and accuracy of three dental implant impression techniques," Quintessence International, vol. 43, no. 2, pp. 119-125, 2012.
21. F. S. Andriessen, D. R. Rijkens, W. J. van der Meer, and D. W. Wismeijer, "Applicability and accuracy of an intraoral scanner for scanning multiple implants in edentulous mandibles: a pilot study," Journal of Prosthetic Dentistry, vol. 111, no. 3, pp. 186-194, 2014.
22. T. Joda and U. Brägger, "Patient-centered outcomes comparing digital and conventional implant impression procedures: a randomized crossover trial," Clinical Oral Implants Research, vol. 27, no. 12, pp. e185-e189, 2016.
23. P. Papaspyridakos, G. O. Gallucci, C. J. Chen, S. Hanssen, I. Naert, and B. Vandenberghe, "Digital versus conventional implant impressions for edentulous patients: accuracy outcomes," Clinical Oral Implants Research, vol. 27, no. 4, pp. 465-472, 2016.
24. E. Gherlone, P. Capparé, R. Vinci, F. Ferrini, G. Gastaldi, and R. Crespi, "Conventional versus digital impressions for "allon-four" restorations," International Journal of Oral and Maxillofacial Implants, vol. 31, no. 2, pp. 324-330, 2016.
25. T. Abdel-Azim, K. Rogers, E. Elathamna, A. Zandinejad, M. Metz, and D. Morton, "Comparison of the marginal fit of lithium disilicate crowns fabricated with CAD/CAM technology by using conventional impressions and two intraoral digital scanners," Journal of Prosthetic Dentistry, vol. 114, no. 4, pp. 554-559, 2015.
26. H. Kocaaǧaoǧlu, H. I. Kilinç, and H. Albayrak, "Effect of digital impressions and production protocols on the adaptation of zirconia copings," Journal of Prosthetic Dentistry, vol. 117, no. 1, pp. 102-108, 2017.
27. P. Seelbach, C. Brueckel, and B. Wöstmann, "Accuracy of digital and conventional impression techniques and workflow," Clinical Oral Investigations, vol. 17, no. 7, pp. 1759-1764, 2012.
28. A.-M. Hadi, B. Yilmaz, E. McGlumphy, W. A. Brantley, and W. M. Johnston, "Distortion of CAD-CAM-fabricated implant-fixed titanium and zirconia complete dental prosthesis frameworks," Journal of Prosthetic Dentistry, vol. 119, no. 1, pp. 116-123, 2017.
29. A. K. Garg, "Cadent iTero's digital system for dental impressions: the end of trays and putty?," Dental Implantology Update, vol. 19, no. 1, pp. 1-4, 2008.
30. G. J. Christensen, "Impressions are changing: deciding on conventional, digital or digital plus in-office milling," Journal of the American Dental Association, vol. 140, no. 10, pp. 1301-1304, 2009.
31. W.-S. Lin, B. T. Harris, E. N. Elathamna, T. Abdel-Azim, and D. Morton, "Effect of implant divergence on the accuracy of definitive casts created from traditional and digital implantlevel impressions: an in vitro comparative study," International Journal of Oral and Maxillofacial Implants, vol. 30, no. 1, pp. 102-109, 2015.
32. E. F. Gherlone, F. Ferrini, R. Crespi, G. Gastaldi, and P. Capparé, "Digital impressions for fabrication of definitive "all-on-four" restorations," Implant Dentistry, vol. 24, no. 1, pp. 125-129, 2015.
33. L. A. Weinberg, "The biomechanics of force distribution in implant-supported prostheses," International Journal of Oral and Maxillofacial Implants, vol. 8, no. 1, pp. 19-31, 1993.
34. S. B. Patzelt, A. Emmanouilidi, S. Stampf, J. R. Strub, and W. Att, "Accuracy of full-arch scans using intraoral scanners," Clinical Oral Investigations, vol. 18, no. 6, pp. 1687-1694, 2013.
35. S. Vandeweghe, V. Vervack, M. Dierens, and H. De Bruyn, "Accuracy of digital impressions of multiple dental implants: an in vitro study," Clinical Oral Implants Research, vol. 28, no. 6, pp. 648-653, 2017.
36. J.-F. Güth, C. Keul, M. Stimmelmayr, F. Beuer, and D. Edelhoff, "Accuracy of digital models obtained by direct and indirect data capturing," Clinical Oral Investigations, vol. 17, no. 4, pp. 1201-1208, 2013.