Environmental effects on fibre reinforced polymeric composites: Evolving reasons and remarks on interfacial strength and stability

Advances in Colloid and Interface Science

Volumn 217, Issue , 2015, Pages 43-67

  Sethi, Sanghamitra ^a   Ray, Bankim Chandra ^a  

^a NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Environmental degradation; Failure modes; Fiber matrix interface; Mechano chemical phenomena; Physico chemical phenomena; Polymer matrix composites

Indexed keywords

DEGRADATION; DURABILITY; FAILURE MODES; FIBER REINFORCED MATERIALS; FIBER REINFORCED PLASTICS; FIBERS; FRACTURE; FRACTURE MECHANICS; INTERFACES (MATERIALS); LAMINATED COMPOSITES; REINFORCED PLASTICS; REINFORCEMENT; SAFETY FACTOR; SUSTAINABLE DEVELOPMENT; WEATHERING;

CONVENTIONAL MATERIALS; ENGINEERING APPLICATIONS; ENVIRONMENTAL CONDITIONING; FIBER REINFORCED POLYMER COMPOSITES; FIBER/MATRIX INTERFACE; MECHANOCHEMICALS; PHYSICO-CHEMICALS; PROPERTIES OF COMPOSITES;

POLYMER MATRIX COMPOSITES;

EID: 85027947075     PISSN: 00018686     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cis.2014.12.005     Document Type: Review

References (181)

1. B.C. Ray, and D. Rathore Durability and integrity studies of environmentally conditioned interfaces in fibrous polymeric composites: critical concepts and comments Adv Colloid Interface Sci 209 2014 68
2. L.C. Hollaway Application of composite material in civil infrastructure Constr Build Mater 24 2010 2419
3. M. Guigon, and E. Klinklin The interface and interphase in carbon fibre-reinforced composites Composites 25 1994 534 539
4. C. Kuttner, A. Hanisch, H. Schmalz, M. Eder, H. Schlaad, I. Burgert, and A. Fery Influence of the polymeric interphase design on the interfacial properties of fiber-reinforced composites Appl Mater Interfaces 5 2013 2469
5. B.C. Ray Effects of changing environment and loading speed on mechanical behavior of FRP composites J Reinf Plast Compos 25 2006 1227
6. B.C. Ray, and S. Sethi Mechanical behavior of polymer composites at cryogenic temperatures Shusheel Kalia, Shao-Yun Fu, Polymers at cryogenic temperature 2013 Springer Berlin Heidelberg Germany
7. Characterization and failure analysis of plastics B. Sanders 2004 ASM International, Materials Park OH
8. B. Paul, L. Holliday, and T.H.-K. Kang Independent environmental effects on durability of fiber-reinforced polymer wraps in civil applications: a review Construct Build Mater 48 2013 360
9. Y. Weitsman Moisture in composites: sorption and damage K.L. Reifsnider, Fatigue of composite materials 1991 385
10. Y.J. Weitsman Effects of fluids on polymeric composites - a review Report MAES 95-1.0 CM 1995 The University of Tennessee Knoxville, TN
11. K. Liao, C.R. Schultheisz, D.L. Hunston, and L.C. Brinson Composite materials for infrastructure applications: a review Adv Mater 30 1998 3
12. N.J. Pagano, and G.A. Schoeppner Delamination of polymer matrix composites: problems and assessment A. Kelly, C. Zweben, Comprehensive composite materials vol. 2 2000 Elsevier Oxford 433 436
13. E.S. Greenhalgh Failure analysis and fractography of polymer composites 2009 Woodhead publishing
14. B.Z. Jang Advanced polymer composites: principles and applications 1994 ASM International, Materials park OH
15. B.C. Ray Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites J Colloid Interface Sci 298 2006 111
16. L.H. Sharpe The interphase in adhesion J Adhes 4 1971 51
17. V.M. Karbhari, M. Engineer, and D.A. Ecker On the durability of composite rehabilitation schemes for concrete: use of a peel test J Mater Sci 32 1997 147
18. W.D. Beseem, and L.T. Drzal The surface properties of carbon fibres and their adhesion to organic polymers NASA contract report 4084 1987
19. B.C. Ray Effect of crosshead velocity and sub-zero temperature on mechanical behavior of hygrothermally conditioned glass fiber reinforced epoxy composites Mater Sci Eng A 397 2004 39
20. A.C. Wijeyewickrema, and L.M. Keer Matrix cracking in a fiber-reinforced composite with slip at the fiber-matrix interface J Solids Struct 30 1993 91
21. T.J. Lu, and J.W. Hutchinson Effect of matrix cracking and interface sliding on the thermal expansion of fibre-reinforced composites Composites 26 1995 403
22. A. Pegoretti, and A.T. DiBenedetto Measurement and analysis of stress transfer and toughness at a fiber-matrix interface Compos A: Appl Sci Manuf 29 1998 1063
23. N.E. Zafeiropoulos, C.A. Baillie, and J.M. Hodgkinson Engineering and characterisation of the interface in flax fibre/polypropylene composite materials. Part II. The effect of surface treatments on the interface Compos A: Appl Sci Manuf 33 2002 1185
24. S. Ochiai, H. Tanaka, S. Kimura, M. Tanaka, M. Hojo, and K. Okuda Modelling of residual stress-induced stress-strain behavior of unidirectional brittle fiber/brittle matrix composite with weak interface Compos Sci Technol 63 2003 1027
25. Z. Shi, Y. Chen, and L. Zhou Micromechanical damage modelling of fiber/matrix interface under cyclic loading Compos Sci Technol 65 2005 1203
26. Z. Serge, and E. Mader Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters Compos Sci Technol 65 2005 149
27. F. París, E. Correa, and V. Mantic Numerical characterisation of the fibre-matrix interface crack growth in composites under transverse compression Eng Fract Mech 75 2008 4085
28. R. Magali, J. Stéphane, L. Jacques, and P. René Characterization of fibre/matrix interfaces in carbon/carbon composites Compos Sci Technol 69 2009 1442
29. M.P. Amy, E.J. Robert, and R.P. Giuseppe Thermo reversible and emendable glass-polymer interface for fiber-reinforced composites Compos Sci Technol 71 2011 586
30. L.S.C. Chen, Kai Liu, N. Nanying, G. Jian, L. Qianfa, C. Feng, and Qiang Fu Enhanced epoxy/silica composites mechanical properties by introducing graphene oxide to the interface Appl Mater Interfaces 4 2012 439
31. G. Fabrizio, L. Lorenzo, and N.B. Paolo Non-linear macroscopic response of fiber-reinforced composite materials due to initiation and propagation of interface cracks Eng Fract Mech 80 2012 92
32. Z. Xiaoqing, F. Xinyu, Y. Chun, Hongzhou Li, Z. Yingdan, Xiaotuo Li, and Liping Yu Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide Carbon 12 2001 345
33. J. Zhao, K.C. Ho Kingsley, Shamsuddin Siti-Ros, B. Alexander, and D. Victoria A comparative study of fibre/matrix interface in glass fibre reinforced polyvinylidene fluoride composites Colloids Surf A Physicochem Eng Asp 413 2012 58
34. M. Karolina, F.S. Bent, M. Peter, and M. Erik Lauridsen, 3D in situ observations of glass fibre/matrix interfacial debonding Compos A: Appl Sci Manuf 55 2013 63
35. L. Yang, Ying Yan, Jian Ma, and Bo Liu Effects of inter-fiber spacing and thermal residual stress on transverse failure of fiber-reinforced polymer-matrix composites Comput Mater Sci 68 2013 255
36. V. Cech, E. Palesch, and J. Lukes The glass fiber-polymer matrix interface/interphase characterized by nanoscale imaging techniques Compos Sci Technol 83 2013 22
37. A.L. Duigou, P. Davies, and C. Baley Exploring durability of interfaces in flax fibre/epoxy micro-composites Compos A: Appl Sci Manuf 48 2013 121
38. V. Cech, A. Knob, H.-A. Hosein, A. Babik, P. Lepcio, F. Ondreas, and L.T. Drzal Enhanced interfacial adhesion of glass fibers by tetra vinyl silane plasma modification Compos A: Appl Sci Manuf 58 2014 84
39. D.A. Bond, and P.A. Smith Modelling the transport of low-molecular-weight penetrants within polymer matrix composites Appl Mech Rev 59 2006 249
40. J.E. Galloway, and B.M. Miles Moisture absorption and desorption predictions for plastic ball grid array packages IEEE Trans Compos Pack Manuf Technol A 20 1997 274
41. R. Shook, T. Conrad, V. Sastry, and D. Steele Diffusion model to derate moisture sensitive surface mount IC's for factory use conditions IEEE Trans Comp Pack Manuf Technol A 19 1996 110
42. X.J. Fan, S.W.R. Lee, and Q. Han Experimental investigations and model study of moisture behaviors in polymeric materials Microelectron Reliab 49 2009 861
43. I. Bonniau, and A.R. Bunsell A comparative study of water absorption theories applied to glass epoxy composites J Compos Mater 15 1981 272
44. W.W. Wright The effect of diffusion of water into epoxy resins and their carbon-fibre reinforced composites Composites 12 1981 201
45. G. Pritchard, and S. Speake The use of water absorption kinetic data to predict laminar property changes Composites 18 1987 227
46. L.R. Bao, and A.F. Yee Moisture diffusion and hygrothermal aging in bismaleimide matrix carbon fiber composites: part II woven and hybrid composites Compos Sci Technol 62 2002 2111
47. M.T. Aronhime, S. Neumann, and G. Marom The anisotropic diffusion of water in Kevlar epoxy composites J Mater Sci 2 1987 2435
48. A. Benkhedda, E.A. Tounsi, and Addabedia Effect of temperature and humidity on transient hygrothermal stresses during moisture desorption in laminated composite plates Compos Struct 82 2008 629
49. Z. Sereir, E. Addabedia, and A. Tounsi Effect of temperature on the hygrothermal behaviour of unidirectional laminated plates with asymmetrical environmental conditions Compos Struct 72 2006 383
50. Z. Sereir, E. Addabedia, and A. Tounsi Effect of the accelerated moisture diffusivity on the hygrothermal behaviour of laminated plate with symmetrical environmental conditions J Therm Stress 28 2005 889
51. A. Tounsi, and K. Amara Stiffness degradation in hygrothermal aged cross-ply laminates with transverse cracks AIAA J 43 2005 1836
52. A. Tounsi, K.H. Amara, and E. Adda-Bedia Analysis of transverse cracking and stiffness loss in cross-ply laminates with hygrothermal conditions Comput Mater Sci 32 2005 167
53. A. Tounsi, K.H. Amara, A. Megueni, and A. Benzair On the transverse cracking and stiffness degradation of aged angle-ply laminates Mater Lett 60 2006 2561
54. G.S. Springer Environmental effects on composite materials 4th ed. 1988 [Dayton, OH]
55. J.Z. Wang, H. Parvatareddy, D.A. Dillard, and T.C. Ward Compos Sci Technol 53 1995 399
56. N.K. Sookay, C.J. Klemperer, and V.E. Verijenko Environmental testing of advanced epoxy composites Compos Struct 62 2003 429
57. M.V. Hosur, S. Zainuddina, Y. Zhoua, Ashok Kumar, and S. Jeelani Durability studies of montmorillonite clay filled epoxy composites under different environmental conditions Mater Sci Eng A 507 2009 117
58. B.C. Ray, and D. Rathore Environmental damage and degradation of FRP composites: a review report Polym Compos 2014 10.1002/PC.22967
59. B.C. Ray, A. Biswas, and P.K. Sinha Hygrothermal effects on mechanical behaviour of FRP composites Met Mater Process 3 1991 99
60. B.C. Ray, S. Mula, T. Bera, and P.K. Ray Prior thermal spikes and thermal shocks on mechanical behavior of glass fiber-epoxy composites J Reinf Plast Compos 2 2006 216
61. B.C. Ray Hydrothermal shock cycles on shear strength of glass fiber-polyester composites J Reinf Plast Compos 24 2005 12
62. B.C. Ray Freeze-thaw response of glass-polyester composites at different loading rates J Reinf Plast Compos 11 2005 321
63. B.C. Ray Thermal shock and thermal fatigue on delamination of glass fiber reinforced polymeric composites J Reinf Plast Compos 24 2005 461
64. B.C. Ray Effects of thermal and cryogenic conditionings on mechanical behavior of thermally shocked glass fiber/epoxy composites J Reinf Plast Compos 24 2005 432
65. J. Zhou, and J.P. Lucas Hygrothermal effects of epoxy resin part I: the nature of water in epoxy Polymer 40 1999 5505
66. P.J. Herrera-Franco, and L.T. Drzal Comparison of methods for the measurement of fiber/matrix adhesion in composites Composites 23 1992 3
67. M. Lai, J. Botsis, J. Cugnoni, and D. Coric An experimental-numerical study of moisture absorption in an epoxy Compos A: Appl Sci Manuf 43 2012 1053
68. J. Etches, K. Potter, Paul Weaver, and Ian Bond Environmental effects on thermally induced multi stability in unsymmetric composite laminates Compos A: Appl Sci Manuf 40 2009 1240
69. L.T. Drzal, M.J. Rich, and P.F. Lloyd Adhesion of graphite fiber to epoxy matrices. I. The role of fiber surface treatment Adhesion 16 1982 1
70. C. Bockenheimer, D. Fata, and W. Possart New aspects of aging in epoxy networks. II. Hydrothermal aging J Appl Polym Sci 91 2004 369
71. O. Yano, and H. Yamaoka Cryogenic properties of polymers Prog Polym Sci 20 1995 585
72. S. Sethi, and B.C. Ray An assessment of mechanical behavior and fractography study of glass/epoxy composites at different temperatures and loading speeds Mater Des 64 2014 160
73. D. Hull, and T.W. Clyne An introduction to composite materials 1996 Cambridge University Press Cambridge
74. O.K. Joshi The effect of moisture on the shear properties of carbon fiber Composites 14 1983 196
75. U. Gaur, C.T. Chou, and B. Miller Effects of hygrothermal ageing on bond strength Composites 25 1993 609
76. S. Birger, A. Moshonov, and S. Keing The effects of thermal and hygrothermal ageing on the failure mechanisms of graphite-fabric epoxy composites subjected to flexural loading Composites 20 1989 4
77. M. Akay, S.K.A. Mun, and A. Stanley Influence of moisture on the thermal and mechanical properties of autoclaved and oven-cured Kevlar-49/epoxy laminates Compos Sci Technol 57 1997 565
78. M.M. Shokrieh, and A. Bayat Effects of ultraviolet radiation on mechanical properties of glass/polyester composites J Compos Mater 41 2007 2443
79. A. Andrady Effects of increased solar ultraviolet radiation on materials J Photochem Photobiol B Biol 46 1998 96
80. D. Feldman Polymer weathering: photo-oxidation J Polym Environ 10 2002 163
81. F. Awaja The investigation of inner structural damage of UV and heat degraded polymer composites using X-ray micro CT Compos A: Appl Sci Manuf 42 2011 408
82. L.F.E. Jacques Accelerated and outdoor/natural exposure testing of coatings Prog Polym Sci 25 2000 1337
83. W. Liau, and F. Tseng The effect of longterm ultraviolet light irradiation on polymer matrix composites Polym Compos 19 1998 440
84. V.S. Chevali, D.R. Dean, and G.M. Janowski Effect of environmental weathering on flexural creep behavior of long fiber-reinforced thermoplastic composites Polym Degrad Stab 95 2010 2628
85. J. lixiang, A study of damage effects of CF/EP under vacuum ultraviolet radiation Appl laser-shanghai 22 2002 409
86. L. Jiang, and L. Sheng Research on effects of electronic irradiation of epoxy resin 648 and TDE-85 J Space Environ 21 2004 49
87. Y. Liu, G.-h. Li, and L.-x. Jiang A study on the resistance performance of epoxy nano-composites under the vacuum ultraviolet irradiation Acta Astronaut 63 2008 1343
88. A. Paillous, and C. Pailler Degradation of multiply polymer-matrix composites induced by space environment Composites 25 1994 287
89. K.-B. Shin Prediction of failure thermal cycles in graphite/epoxy composite materials under simulated low earth orbit environments Compos Part B: Eng 31 2000 223
90. F. Awaja Surface molecular degradation of 3D glass polymer composite under low earth orbit simulated space environment Polym Degrad Stab 95 2010 987
91. K.H.G. Ashbee, F.C. Frank, and R.C. Wyatt Water damage in polyester resins Proc R Soc A 300 1967 415
92. I. Merdas, F. Thominette, A. Teharkhtchi, and J. Verdu Factors governing water absorption by composite matrices Compos Sci Technol 62 2002 487 492
93. Y.X. Shao, and S. Kouadi Durability of fiberglass composite sheet piles in water J Compos Constr 6 2002 280
94. L.C. Bank, T.R. Gentry, and A. Barkatt Accelerated test methods to determine the long-term behavior of FRP composite structures environmental effects J Reinf Plast Compos 14 1995 559
95. W. Ying, and H. Hahn Thomas AFM characterization of the interfacial properties of carbon fiber reinforced polymer composites subjected to hygrothermal treatments Compos Sci Technol 67 2007 92
96. P. Nogueira, C. Ramirez, A. Torres, M.J. Abad, J. Cano, and J. Lopez Effect of water sorption on the structure and mechanical properties of an epoxy resin system J Appl Polym Sci 80 2001 71
97. J.S. Earl, and R.A. Shenoi Hygrothermal ageing effects on FRP laminate and structural foam materials Compos Part A: Appl Sci 35 2004 1237
98. M. Robert, R. Roy, and B. Benmokrane Environmental effects on glass fiber reinforced polypropylene thermoplastic composite laminate for structural applications Polym Compos 31 2010 604
99. V.M. Karbhari E-glass/vinyl ester composites in aqueous environments: effects on short-beam shear strength J Compos Constr 8 2004 148
100. J. González-Benito The nature of the structural gradient in epoxy curing at a glass fibre/epoxy matrix interface using FTIR imaging J Colloid Interface Sci 267 2003 326
101. D.M. Laura, H. Keskkula, J.W. Barlow, and D.R. Paul Effect of glass fiber surface chemistry on the mechanical properties of glass fiber reinforced, rubber-toughened nylon 6 Polymer 43 2002 4673
102. G.S. Springer Environmental effects on composite materials vol. 1 1981 Technomic Publishing Company Lancaster PA
103. G.S. Springer Environmental effects on composite materials vol. 2 1984 Technomic Publishing Company Lancaster PA
104. G.S. Springer Environmental effects on composite materials vol. 3 1987 Technomic Publishing Company Lancaster PA
105. W.K. Loh, A.D. Crocombe, M.M.A. Wahab, and I.A. Ashcroft Modelling anomalous moisture uptake, swelling and thermal characteristics of a rubber toughened epoxy adhesive Int J Adhes Adhes 25 2005 1
106. A. Haque, S. Mahmood, L. Walker, and S. Jeelani Moisture and temperature induced degradation in tensile properties of Kevlar graphite epoxy hybrid composites J Reinf Plast Compos 10 1991 132
107. A.T. DiBenedetto Tailoring of interfaces in glass fiber reinforced polymer composites: a review Mater Sci Eng A 302 2001 74
108. F. Fllyin, and C. Rohrbacher The influence of aqueous environment, temperature and cyclic loading on glass-fiber/epoxy composite laminates J Reinf Plast Compos 22 2003 615
109. S. Birger, A. Moshonov, and S. Kenig The effects of thermal and hygrothermal ageing on the failure mechanisms of graphite-fabric epoxy composites subjected to flexural loading Composites 20 1989 12
110. Y.C. Lin, and Chen Xu Moisture sorption-desorption-resorption characteristics and its effect on the mechanical behavior of the epoxy system Polymer 46 2005 11994
111. V. Bellenger, L. Gautier, and B. Mortaigne Interface damage study of hydrothermally aged glass-fibre-reinforced polyester composites Compos Sci Technol 59 1999 2329
112. M. Omiya, K. Kishimoto, and W. Yang Interface debonding model and its application to the mixed mode interface fracture toughness Int J Damage Mech 11 2002 263
113. L.E. Asp The effects of moisture and temperature on the interlaminar delamination toughness of a carbon/epoxy composite Compos Sci Technol 58 1998 967
114. B. Miller, P. Muri, and L. Rebenfeld A microbond method for determination of the shear strength of a fiber/resin interface Compos Sci Technol 28 1987 17 32
115. P. Herrera-Franco, and L. Drzal Comparison of methods for the measurement of fibre/matrix adhesion in composites Composites 23 1992 2
116. P. Zinck Are microcomposites realistic models of the fibre/matrix interface? I. Micromechanical modelling Polymer 42 2001 5401
117. S. Ogihara, and J. Koyanagi Investigation of combined stress state failure criterion for glass fiber/epoxy interface by the cruciform specimen method Compos Sci Technol 70 2010 143
118. G. Tandon, R. Kim, and V. Bechel Fiber-matrix interfacial failure characterization using a cruciform-shaped specimen J Compos Mater 36 2002 2667 2691
119. D. Gundel, B. Majumdar, and D. Miracle Evaluation of the transverse response of fiber-reinforced composites using a cross-shaped sample geometry Scr Metall Mater 33 1995 2057
120. J. Koyanagi, and S. Ogihara Temperature dependence of glass fiber/epoxy interface normal strength examined by a cruciform specimen method Compos Part B: Eng 42 2011 1492
121. J. Koyanagi Mixed-mode interfacial debonding simulation in single-fiber composite under a transverse load J Solid Mech Mater Eng 3 2009 796
122. S. Zhandarov, and E. Mäder Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters Compos Sci Technol 65 2005 149
123. J. Koyanagi A numerical simulation of time-dependent interface failure under shear and compressive loads in single-fiber composites Appl Compos Mater 17 2010 31
124. C. DiFrancia, T.C. Ward, and R.O. Claus The single-fibre pull-out test. 2: quantitative evaluation of an uncatalysed TGDDM/DDS epoxy cure study Compos A: Appl Sci Manuf 27 1996 613 624
125. D. Bannister Analysis of the single-fibre pull-out test by means of raman spectroscopy: part II. Micromechanics of deformation for an aramid/epoxy system Compos Sci Technol 53 1995 411
126. C. DiFrancia, T.C. Ward, and R.O. Claus The single-fibre pull-out test. 1: review and interpretation Compos A: Appl Sci Manuf 27 1996 597 612
127. J. Koyanagi, S. Yoneyama, and A. Nemoto Time and temperature dependence of carbon/epoxy interface strength Compos Sci Technol 70 2010 1395
128. K. Santhosh, M. Muniraju, and N.D. Shivakumar Hygrothermal durability and failure modes of FRP for marine applications J Compos Mater 46 2012 1889
129. Y.G. Chacón, S. Paciornik, and J.R.M. d'Almeida Microstructural evaluation and flexural mechanical behavior of pultruded glass fiber composites Mater Sci Eng A 528 2010 172
130. P. Sun, Y. Zhao, and Y.F. Luo Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite Mater Des 32 2011 4341
131. X.Y. Lv, R.G. Wang, and W.B. LiuF Surface and interface properties of carbon fiber composites under cyclical aging Appl Surf Sci 257 2011 10459
132. S.J. Park, Y.H. Chang, and Y.C. Kim Anodization of carbon fibers on interfacial mechanical properties of epoxy matrix composites J Nanosci Nanotechnol 10 2010 117
133. Min Li, Hongxin Liu, YizhuoGu, Yanxia Li, and Zuoguang Zhang Effects of carbon fiber surface characteristics on interfacial bonding of epoxy resin composite subjected to hygrothermal treatments Appl Surf Sci 288 2014 666
134. K. Friedrich Application of fracture mechanics on composite materials 1987 Elsevier France
135. T.H. Hahn, and Y. Wang AFM characterization of the interfacial properties of carbon fiber reinforced polymer composites subjected to hygrothermal treatments Compos Sci Technol 67 2007 92 [67]
136. S.L. Gao, and E. Mader Characterization of interphase nanoscale property variations in glass fiber reinforced polypropylene and epoxy resin matrix Compos A: Appl Sci Manuf 33 2002 559
137. Qing Wu, Min Li, YizhuoGu, Yanxia Li, and Zuoguang Zhang Nano-analysis on the structure and chemical composition of the interphase region in carbon fiber composite Compos A: Appl Sci Manuf 56 2014 143
138. H.E. Gascoigne Residual surface stresses in laminated cross-ply fiber-epoxy composite materials Exp Mech 34 1994 27
139. H. Hosseini-Toudeshky, and B. Mohammad Thermal residual stresses effects on fatigue crack growth of repaired panels bounded with various composite materials Compos Struct 89 2009 216
140. N. Ersoy, and O. Vardar Measurement of residual stresses in layered composites by compliance method J Compos Mater 34 2000 575
141. M.M. Shokrieh, A. Daneshvar, and S. Akbari Reduction of thermal residual stresses of laminated polymer composites by addition of carbon nanotubes Mater Des 53 2014 209
142. Sarah M. Bishop The significance of defects on the failure of fiber composites Accession No: ADA111479 1981 [France]
143. B.C. Ray Thermal shock on interfacial adhesion of thermally conditioned glass fiber/epoxy composites Mater Lett 58 2004 2175
144. B.C. Ray Effects of crosshead velocity and Sub-zero temperature on mechanical behavior of hygrothermally conditioned glass fiber reinforced epoxy composites Mater Sci Eng A 379 2004 39
145. M.W. Myer, C.T. Herakovich, S.M. Milkovich, and J.S. Short Temperature dependence of mechanical and thermal expansion properties of T-300/5208 graphite epoxy Composites 14 1983 276
146. D.L. Hiemstra, and N.R. Sottos Thermally induced interfacial microcracking in polymer matrix composites J Compos Mater 27 1993 1030
147. H. Aglan, Z. Qian, and D. Mitra-Majumdar The effect of temperature on critical failure properties of advanced polymer composites Polym Test 11 1992 169
148. J.K. Kim, and Y.W. Mai Engineered interfaces in fiber reinforced composites 1998 Elsevier Amsterdam
149. B.L. Smith, T.E. Schaffer, M. Viani, J.B. Thompson, N.A. Frederrick, J. Kindt, A. Belchers, G.D. Strucky, D.E. Morse, and P.K. Hansma Molecular mechanistic origin of the toughness of natural adhesive Fibres Compos 399 1999 761
150. Y. Joliff, W. Rekik, L. Belec, and J.F. Chailan Study of the moisture/stress effects on glass fibre/epoxy composite and the impact of the interphase area Compos Struct 108 2014 876
151. H. Fischer Polymer nanocomposites: from fundamental research to specific applications Mater Sci Eng C 23 2003 763
152. P.M. Ajayan, L.S. Schadler, and P.V. Braun Nanocomposite science and technology 2003 Wiley VCH Weinheim
153. A.C. Balazs, T. Emrick, and T.P. Russell Nanoparticle polymer composites: where two small worlds meet Science 314 2006 1107
154. Michael E. Mackay, Anish Tutejal, Phillip M. Duxbury, Craig J. Hawker, Brooke Van Horn, Zhibin Guan, Guanghui Chen, and R.S. Krishnan General strategies for nanoparticle dispersion Science 311 2006 1740
155. P. Rittigstein, R.D. Priestley, L.J. Broadbelt, and J.M. Torkelson Model polymer nanocomposites provide an understanding of confinement effects in real nanocomposites Nat Mater 6 2007 278
156. L. Schadler Model interfaces Nat Mater 6 2007 257
157. G. Tsagaropoulos, and A. Eisenburg Direct observation of two glass transitions in silica-filled polymers: implications to the morphology of random ionomers Macromolecules 28 1995 396
158. Oh. Hyunjoon, F. Peter, and P.F. Green Polymer chain dynamics and glass transition in athermal polymer/nanoparticle mixtures Nat Mater 8 2009 139
159. R. Mezzenga, and J. Ruokolainen Nanoparticles in the right place Nat Mater 8 2009 926
160. B. Wetzel, P. Rosso, F. Haupert, and K. Friedrich Epoxy nanocomposites - fracture and toughening mechanisms Eng Fract Mech 73 2006 2375
161. J.M. Kropka, V. Pryamitsyn, and V. Ganesan Relation between glass transition temperatures in polymer nanocomposites and polymer thin films Phys Rev Lett 101 2008 075702
162. Q.H. Zeng, A.B. Yu, and G.Q. Lu Multiscale modeling and simulation of polymer nanocomposites Prog Polym Sci 33 2008 191
163. D. Gersappe Molecular mechanisms of failure in polymer nanocomposites Phys Rev Lett 89 2002 058301
164. J. Moczo, and B. Pukanszky Polymer micro and nanocomposites: structure, interactions, properties J Ind Eng Chem 14 2008 535
165. M. Stamm, and J.-U. Sommer Entropy and enthalpy at play Nat Mater 6 2007 260
166. A.A. Litmanovich, and I.M. Papisov Preparation of nanocomposites in the processes controlled by macromolecular pseudomatrices: a theoretical treatment Vysokomolek Soed B 39 1997 323
167. B.A. Rozenberg, and R. Tenne Polymer-assisted fabrication of nanoparticles and nanocomposites Prog Polym Sci 33 2008 40
168. J. Liu, Y. Gao, D. Cao, L. Zhang, and Z. Guo Nanoparticle dispersion and aggregation in polymer nanocomposites: insights from molecular dynamics simulation Langmuir 27 2011 7926
169. D. Tian, S. Blacher, and R. Jerome Biodegradable and biocompatible inorganic-organic hybrid materials: 4. Effect of acid content and water content on the incorporation of aliphatic polyesters into silica by the sol-gel process Polymer 40 1999 951 957
170. J. Hao, M. Yuasn, and X. Deng Biodegradable and biocompatible nanocomposite of poly(e-caprolactone) with hydroxyapatite nanocrystals: thermal and mechanical properties J Appl Polym Sci 86 2002 676 683
171. J.A. Hayward, and D. Chapman Biomembrane surfaces as models for polymer design: the potential for hemocompatibility Biomaterials 5 1984 135 142
172. G.H. Hsiue, J.M. Yang, and R.L. Wu Preparation and properties of a biomaterial: HEMA grafted SBS by c-irradiation J Biomed Mater Res 22 1988 405 415
173. N. Nakabayashi, K. Ishihara, A. Watanabe, and M. Kojima H. Feng, Y. Han, L. Huang, Polymers and biomaterials 1991 Elsevier Science Publishers Amsterdam 343 351
174. M. Pavlova, and M. Draganova Biocompatible and biodegradable polyurethane polymers Biomaterials 13 1993 1024 1029
175. D.K. Han, K.D. Park, G.H. Ryu, and U.Y. Kim Enhanced blood compatibility of polymers grafted by sulfonated POE via a negative cilia concept J Biomed Mater Res 24 2003 2213 2223
176. R. Fukai, P.H.R. Dakwa, and W. Chen Strategies toward biocompatible artificial implants: grafting of functional poly(ethylene glycol)s to poly(ethylene terephtharate) surfaces J Polym Sci Part A Polym Chem 42 2004 5389 5400
177. K. Ishihara, H. Oshida, Y. Endo, T. Ueda, A. Watanabe, and N. Nakabayashi J Biomed Mater Res 26 1992 1543 1552
178. N. Nakabayashi, and D.F. Williams Preparation of non-thrombogenic materials using 2-methacryloyloxyethyl phosphorylcholine Biomaterials 24 2003 2431 2435
179. M.H. Stenzel, C. Barner-Kowollik, T.P. Davis, and H.M. Dalton Amphiphilic block copolymers based on poly(2-acryloyloxy-ethyl phosphorylcholine) prepared via RAFT polymerization as biocompatible nanocontainers Macromol Diosci 4 2004 445 453
180. G.H. Hsiue, J.M. Yang, and R.L. Wu Preparation and properties of a biomaterial: HEMA grafted SBS by c-ray irradiation J Biomed Mater Res 22 1988 405 415
181. Y. Takeuchi, K. Fujiki, and N. Tsubokawa Preparation of amphiphilic carbon black by postgrafting of polyethyleneimine to grafted polymer chains on the surface Polym Bull 41 1998 85 92