Measurement of residual stresses in layered composites by compliance method

Journal of Composite Materials

Volumn 34, Issue 7, 2000, Pages 575-598

  Ersoy, Nuri ^a   Vardar, Öktem ^a  

^a BOGAZICI UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

FIBER REINFORCED PLASTICS; MATHEMATICAL MODELS; PLASTIC LAMINATES; RESIDUAL STRESSES; STRESS ANALYSIS; THERMOPLASTICS;

COMPLIANCE METHOD; LAYER REMOVAL METHOD; LAYERED COMPOSITES;

LAMINATED COMPOSITES;

EID: 0033902116     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1106/KK4W-0E04-ACU5-CKCN     Document Type: Article

References (43)

1. Jeronimidis, G. and A. T. Parkyn, 1988, "Residual Stresses in Carbon Fiber-Thermoplastic Laminates," Journal of Composite Materials, 22: 401-415.
2. Kim, K. S. and H. T. Hahn, 1989, "Residual Stress Development During Processing of Graphite/Epoxy Composites," Composite Science and Technology, 36: 121-132.
3. Kim, K. S., H. T. Hahn, and R. B. Croman, 1989, "The Effect of Cooling Rate on Residual Stresses in a Thermoplastic Composite," Journal of Composites Technology and Research, 11(2): 47-52.
4. Bogetti, T. A. and J. W. Gillespie, Jr., 1989, "Process-Induced Stress and Deformation in Thick-Section Thermosetting Composite Laminates," Proceedings of the 21st International SAMPE Technical Conference, September 25-28, pp. 947-955.
5. Schulte, K. J. and H. T. Hahn, 1990, "Annealing of Residual Stresses in Gr/PEEK Laminate," Proceedings of American Society for Composites, 5th Technical Conference: Composite Materials in Transition. E. Lansing, MI, June 12-14, pp. 81-90.
6. Chapman, T. J., J. W. Gillespie, Jr., R. B. Pipes, J-A. E. Månson, and J. C. Seferis, 1990, "Prediction of Process Induced Residual Stresses in Thermoplastic Composites," Journal of Composite Materials, 24: 616-643.
7. Lawrence, W. E., J-A. E. Månson, J. C. Seferis, J. W. Gillespie, Jr., and R. B. Pipes, 1990, "Prediction of Residual Stress in Continuous Fiber Semicrystalline Thermoplastic Composites: A Kinetic-Viscoelastic Approach," Proceedings of American Society for Composites, 5th Technical Conference: Composite Materials in Transition, E. Lansing, MI, June 12-14, pp. 401-414.
8. Unger, W. J. and J. S. Hansen, 1993, "The Effect of Cooling Rate and Annealing on Residual Stress Development in Graphite Fibre Reinforced PEEK," Journal of Composite Materials, 27(2): 108-137.
9. Weitsman, Y., 1979, "Residual Thermal Stresses due to Cool-Down of Epoxy-Resin Composites," Journal of Applied Mechanics, 46: 563-567.
10. Harper, B. D. and Y. Weitsman, 1981, "Residual Thermal Stresses in an Unsymmetrical Cross-Ply Graphite/Epoxy-Laminate," Proceedings of AIAA/ASME/ASCE/AHS 22nd Structures, Structural Dynamics and Materials Conference, Atlanta, Georgia, April 6-8, 1981, pp. 325-332.
11. Lee, K. and Y. Weitsman, 1994, "Optimal Cool Down in Nonlinear Thermoviscoelasticity With Application to Graphite/PEEK (APC-2) Laminates," Journal of Applied Mechanics, 61: 367-374.
12. Wang, T-M., I. M. Daniel, and J. T. Gotro, 1992, "Thermoviscoelastic Analysis of Residual Stresses and Warpage in Composite Laminates," Journal of Composite Materials, 26(6): 883-889.
13. Li, M. C., J. J. Wu, A. C. Loos, and J. Morton, 1997, "A Plane Stress Finite Element Model for Process-Induced Residual Stresses in a Graphite/PEEK Composite," Journal of Composite Materials, 31(3): 212-243.
14. Månson, J-A. and J. C. Seferis, 1987, "Internal Stress Determination by Process Simulated Laminates," SPE ANTEC 1987 Conference Proceedings, Los Angeles, CA, May.
15. Young, R. J., R. J. Day, M. Zakikani, and I. M. Robinson, 1989, "Fibre Deformation and Residual Stresses in Carbon Fibre Reinforced PEEK," Composites Science and Technology, 34: 243-258
16. Galiotis, C., N. Melanitis, D. N. Batchelder, I. M. Robinson, and J. A. Peacock, 1988, "Residual Strain Mapping in Carbon Fibre/PEEK Composites," Composites, 19(4): 321-324
17. Månson, J-A. E. and J. C. Seferis, 1992, "Process Simulated Laminate (PSL): A Methodology to Internal Stress Characterization in Advanced Composite Materials," Journal of Composite Materials, 26(3): 405-431.
18. Eijpe, M. P. I. M. and P. C. Powell, 1997, "A Modified Layer Removal Analysis for the Determination of Internal Stresses in Polymer Composites," Journal of Thermoplastic Composite Materials, 10(4): 334-352.
19. Vaidyanathan, S. and I. Finnie, 1971, "Determination of Residual Stresses from Stress Intensity Factor Measurements," Journal of Basic Engineering, 93: 242-246.
20. Cheng, W. and I. Finnie, 1985, "A Method for Measurement of Axisymmetric Residual Stresses in Circumferentially Welded Thin-Walled Cylinders," Journal of Engineering Materials and Technology, 107: 181-185.
21. Cheng, W. and I. Finnie, 1987, "A New Method of Measurement of Residual Axial Stresses Applied to a Multi-Pass Butt Welded Cylinder," Journal of Engineering Materials and Technology, 109: 337-342.
22. Cheng, W. and I. Finnie, 1986, "Measurement of Residual Hoop Stress in Cylinders Using the Compliance Method," Journal of Engineering Materials and Technology, 108: 87-92.
23. Cheng, W. and I. Finnie, 1991, "An Experimental Method for Determining Residual Stresses in Welds," in Modelling of Casting, Welding, and Advanced Solidification Processes - V., M. Rappaz, Ed., The Minerals, Metals, and Materials Society, Warrendale, PA, USA, pp. 245-252.
24. Schindler, H. J., W. Cheng, and I. Finnic, 1994, "Measurement of the Residual Stress Distribution in a Disk or a Solid Cylinder Using the Crack Compliance Method," in Proceedings of the 4th International Conference on Residual Stress, Baltimore, Maryland, 1266-1274.
25. Schindler, H. J., 1995, "Determination of Residual Stress Distributions from Measured Stress Intensity Factors," International Journal of Fracture, 74(2): R23-R30.
26. Fett, T. and G. Thun, 1996, "Residual Stresses in PVC-Cylinders Determined with the Weight Function Method," Engineering Fracture Mechanics, 55(5): 859-863.
27. Kang, K. J., J. H. Song, and Y. Y. Earmme, 1989, "A Method for the Measurement of Residual Stresses Using a Fracture Mechanics Approach," Journal of Strain Analysis, 24: 23-30.
28. Beghini, M. and L. Bertini, 1990, "Residual Stress Modelling by Experimental Measurements and Finite Element Analysis," Journal of Strain Analysis for Engineering Design, 25(2): 103-108.
29. Galatalo, R. and A. Laciotti, 1997, "Fatigue Crack Propagation in Residual Stress Fields of Welded Plaies," International Journal of Fatigue, 19(1): 43-49.
30. Ritchie, D. and R. H. Leggatt, May 1987, "The Measurement of the Distribution of Residual Stress Through the Thickness of a Welded Joint," Strain, 61-70.
31. Cheng, W., I. Finnie, and M. B. Prime, 1992, "Measurement of Residual Stresses Through the Thickness of a Strip Using the Crack Compliance Method," in Residual Stresses III - Science and Technology, Proceedings of the Third International Conference on Residual Stress, Vol. 2, H. Fujiwara et al., Eds., Elsevier Applied Science, pp. 1127-1132.
32. Finnie, S., W. Cheng, I. Finnie, J-M. Drezet, and M Gremaud, 1996, "The Computation and Measurement of Residual Stress in Laser Deposited Layers," in Proceedings of the 4th European Conference on Residual Stress, Cluny-en-Bourgogne, France, June 1996.
33. Gremaud, M., W. Cheng, M. Prime, and I. Finnie, 1992, "Measurement of Residual Stresses in Laser Treated Layers Using the Crack Compliance Method," in Proceedings of International Conference on Laser Advanced Materials Processing, Eds.: A. Matasunawa and S. Katayama, pp. 713-718.
34. Cheng, W., I. Finnie, M. Gremaud, A. Rosselet, and R. D. Streit, 1994, "The Compliance Method for the Measurement for Near Surface Residual Stresses - Application and Validation for Surface Treatment by Laser and Shot Peening," Journal of Engineering Materials and Technology, 116:556-560.
35. Yu, W., P. Sunderland, and J-A. E. Månson, 1994, "A Method for the Measurement of Internal Stresses in Laminated Composites, the Successive Grooving Technique," in Proceedings of ANTEC 94, II, 2045-2049.
36. ANSYS User's Manual Revision 5.2, Ansys Inc., Houston, PA.
37. ICI Data Sheet, "Aromatic Polymer Composites," 1986.
38. Heyn, E. and O. Bauer, 1911, "On Stresses in Cold Drawn Metals," Internationale Zeitschrift für Metallographie, 1: 16-50.
39. Sachs, G., 1927, "Der Nachweis Innerer Spannungen in Stangen und Rohren," Zeitschrift für Metallkunde, 19: 352-357.
40. Huntz, A. M. and J. G. Zhao, 1986, "A Curvature Method for Determining the Stress Distribution in a Duplex Oxide-Metallic Substrate System," in Residual Stresses in Science and Technology, E. Macherauch and V. Hauk, Eds., DGM, pp. 223-229.
41. Treutling, R G. and W. J. Read, Jr., 1951, "A Mechanical Determination of Residual Stresses in Sheet Materials," Journal of Applied Physics, 22(2): 130-134.
42. Frick, R. P., G. A. Gurtman, and H. D. Meriwether, 1967, "Experimental Determination of Residual Stresses in an Orthotropic Material," Journal of Materials, 2: 719-748.
43. Vinson, J. R. and R. L. Sierakovski, 1986, The Behavior of Structures Composed of Composite Materials, Martinus Nijhoff Publishers, Dordrecht, the Netherlands.