3D in situ observations of glass fibre/matrix interfacial debonding

Composites Part A: Applied Science and Manufacturing

Volumn 55, Issue , 2013, Pages 63-73

  Martyniuk, Karolina ^a   Sørensen, Bent F ^a   Modregger, Peter ^b,c   Lauridsen, Erik M ^d  

^a Section of Composites and Materials Mechanics   (Denmark)

^b PAUL SCHERRER INSTITUTE   (Switzerland)

^c UNIVERSITY OF LAUSANNE   (Switzerland)

^d TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

A. Glass fibres; B. Debonding Synchrotron; B. Interface; X ray tomography

Indexed keywords

HIGH RESOLUTION MICROTOMOGRAPHY; IN-SITU OBSERVATIONS; INITIATION AND PROPAGATION; INTERFACIAL DEBONDING; MICRO-MECHANICAL MODELING; TENSILE DIRECTIONS; X RAY MICROTOMOGRAPHY; X-RAY TOMOGRAPHY;

FIBERS; GLASS; THREE DIMENSIONAL; TOMOGRAPHY;

DEBONDING;

EID: 84883891549     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2013.07.012     Document Type: Article

References (28)

1. C. Blanco, E. Casal, M. Granda, and R. Menéndez Influence of fibre-matrix interface on the fracture behaviour of carbon-carbon composites J Eur Ceram Soc 23 2003 2857 2866 (Pubitemid 37124259)
2. B.K. Larson, and L.T. Drzal Glass fibre sizing/matrix interphase formation in liquid composite moulding: effects on fibre/matrix adhesion and mechanical properties Composites 25 1994 711 721
3. S.F. Zhandarov, and E.V. Pisanova The local bond strength and its determination by fragmentation and pull-out test Compos Sci Technol 57 1997 957 964
4. R.J. Kerans, and T.A. Parthasarathy Theoretical analysis of the fiber pullout and pushout tests J Am Ceram Soc 74 1991 1585 1596
5. M.C. Watson, and T.W. Clyne The tensioned push-out test for fibre-matrix interface characterisation under mixed mode loading Mater Sci Eng A 160 1993 1 5 (Pubitemid 23616238)
6. J.W. Hutchinson, and Z. Suo Mixed mode cracking in layered materials Adv Appl Mech 1992 63 191
7. J.W. Hutchinson Mixed mode fracture mechanics of interfaces Metal-Ceram Acta - Scripta Metall Proc Ser 4 1990 295 306
8. K.M. Liechti, and Y.S. Chai Asymmetric shielding in interfacial fracture under in-plane shear J Appl Mech 59 1992 295 304
9. F. París, E. Correa, and V. Mantič Kinking of transversal interface cracks between fiber and matrix J Appl Mech 74 2007 703 716 (Pubitemid 47317695)
10. J. Koyanagi, P.D. Shah, S. Kimura, S.K. Ha, and H. Kawada Mixed-mode interfacial debonding simulation in single-fiber composite under a transverse load J Solid Mech Mater Eng 3 2009 796 806
11. E. Correa, V. Mantič, and F. Paris A micromechanical view of inter-fibre failure of composite materials under compression transverse to the fibres Compos Sci Technol 68 2008 2010 2021
12. F. ParÍs, E. Correa, and J. Cañas Micromechanical view of failure of the matrix in fibrous composite materials Compos Sci Technol 63 2003 1041 1052 (Pubitemid 36453837)
13. E. Correa, E.K. Gamstedt, F. París, and V. Mantič Effects of the presence of compression in transverse cyclic loading on fibre-matrix debonding in unidirectional composite plies Compos Part A: Appl Sci Manuf 38 2007 2260 2269 (Pubitemid 350017075)
14. P.F. Meurs, B.A.G. Schrauwen, P.J. Schreurs, and T. Peijs Determination of the interfacial normal strength using single fibre model composites Compos Part A: Appl Sci Manuf 29 1998 1027 1034 (Pubitemid 128416171)
15. D.B. Bogy Two edge-bonded elastic wedges of different materials and wedge angles under surface tractions J Appl Mech 38 1971 377 386
16. P. Wright, A. Moffat, I. Sinclair, and S. Spearing High resolution tomographic imaging and modelling of notch tip damage in a laminated composite Compos Sci Technol 70 2010 1444 1452
17. M. Rask, B. Madsen, B.F. Sørensen, J.L. Fife, K. Martyniuk, and E.M. Lauridsen In situ observations of microscale damage evolution in unidirectional natural fibre composites Compos Part A: Appl Sci Manuf 43 2012 1639 1649
18. P. Brøndsted, H. Lilholt, and A. Lystrup Composite materials for wind power turbine blades Annu Rev Mater Res 35 2005 505 538 (Pubitemid 41319487)
19. Q. Zhu, P.H. Geubelle, M. Li, and C.L. Tucker Dimensional accuracy of thermoset composites: simulation of process-induced residual stresses J Compos Mater 35 2001 2171 2205 (Pubitemid 34138693)
20. M. Tanoglu, S. Ziaee, and S.H. Mcknight Investigation of properties of fiber/matrix interphase formed due to the glass fiber sizings J Mater Sci 36 2001 3041 3053 (Pubitemid 32680850)
21. B.F. Sørensen, A. Horsewell, and P. Skov-Hansen In situ observations of crack formation in multi-filament Bi-2223 HTS tapes Physica C 372-376 2002 1032 1035 (Pubitemid 34867849)
22. M. Stampanoni, A. Groso, A. Isenegger, G. Mikuljan, Q. Chen, and A. Bertrand Trends in synchrotron-based tomographic imaging: the SLS experience Proc SPIE 6318 2006 63180M-63180M-14
23. http://www.vsg3d.com/avizo/overview.
24. C. Ageorges, K. Friedrich, T. Schüller, and B. Lauke Single-fibre Broutman test: fibre-matrix interface transverse debonding Compos Part A: Appl Sci Manuf 30 1999 1423 1434 (Pubitemid 30501664)
25. S. Ho, and Z. Suo Tunneling cracks in constrained layers J Appl Mech 60 1993 890 894
26. T. Nakamura, and M.S. Kamath Three-dimensional effects in thin film fracture mechanics Mech Mater 13 1992 67 77
27. P. Cloetens, M. Pateyron-Salomé, J.Y. Buffière, G. Peix, J. Baruchel, and F. Peyrin Observation of microstructure and damage in materials by phase sensitive radiography and tomography J Appl Phys 81 1997 5878
28. K. Haldrup, S.F. Nielsen, and A.J. Wert A general methodology for full-field plastic strain measurements using X-ray absorption tomography and internal markers Exp Mech 48 2008 199 211 (Pubitemid 351436973)